A cobalt nanoparticles-attached indium tin oxide(CoNPs/ITO) electrode was applied to the immobilization of hemoglobin(Hb) and an Hb modified CoNPs/ITO electrode(Hb/CoNPs/ITO) was prepared. The direct electron tr...A cobalt nanoparticles-attached indium tin oxide(CoNPs/ITO) electrode was applied to the immobilization of hemoglobin(Hb) and an Hb modified CoNPs/ITO electrode(Hb/CoNPs/ITO) was prepared. The direct electron transfer of Hb was shown by the well-behaved voltammetric responses for Hb/CoNPs/ITO electrode and the effects of scan rate and pH value were observed. Based on the catalytic activity of Hb immobilized on the CoNPs/ITO electrode toward the reduction of H2O2, a mediator-free H2O2 sensor was developed. A linear relationship existed between the catalytic current and the H2O2 concentration in a range of 1.0--100.0 μmol/L with a detection limit (S/N=3) of 0.2μmol/L.展开更多
In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displ...In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displayed on the liquid crystal display (LCD) immediately.In this study,the basic sensor was the tin oxide pH electrode,which was fabricated by radio frequency (r.f.) sputtering system on the indium tin oxide (ITO)/glass substrate.Moreover,the major blocks of the system consist of the tin oxide electrode-based ion selective electrodes (ISEs),an analog front-ended readout circuit,a microcontroller with built-in analog to digital (A/D) converter.In addition,by the embedded system design,the measurement results can be transmitted to a portable system or computer through the Universal Serial Bus (USB) and Universal Asynchronous Receiver Transmitter (UART) interface immediately.According to the experimental results,the multi-sensing system has high performance and reliability for pH,K^+,and Na^+ detection.展开更多
s: A new method for the preparation of an organic-inorganic composite film of the heteropolyanion has been developed by modifying P(Mo2O7)6-7 to the indium tin oxide (ITO) electrode surface. The modified electrode dis...s: A new method for the preparation of an organic-inorganic composite film of the heteropolyanion has been developed by modifying P(Mo2O7)6-7 to the indium tin oxide (ITO) electrode surface. The modified electrode displayed a strong catalytic activity towards the reduction of IO3-. In the range of 1.0?0-6~5?0-4mol/L, the catalytic current was linear proportional to the IO3- concentration.展开更多
This paper presents the studying results of the sodium ion sensor device based on the SnO_2/ITO glass structure in the detection of rinsing solution for contact lenses.The selective membrane contains poly (vinyl chlor...This paper presents the studying results of the sodium ion sensor device based on the SnO_2/ITO glass structure in the detection of rinsing solution for contact lenses.The selective membrane contains poly (vinyl chloride) (PVC),bis (2-ethylhexyl) sebacate (DOS),(12-crown-4) methylmalonate (B12C4),and sodium tetrakis (4-fluoropbenyl) borate dehydrate (NaTFBD). The final weight ratios are PVC:DOS:B12C4:NaTFBD=33:66:2:2.In this condition,the sensor has performances with linear sensitivity,short response time,good repeatability and selectivity.The sensor was used to measure the rinsing solution for the contact lenses.Because the experimental results show close to the accurate value for four commercial products,this sensor can preliminary be used in detecting the rinsing solution for the contact lenses.Using this structure and sodium-sensing membrane to construct the sodium sensor is proven successfully in this application.展开更多
The Ti/SnO2-Sb-Mo electrodes doped with different molar ratios of molybdenum(Mo) were prepared by sol—gel method in order to investigate the effect of Mo on the characterization of Ti/SnO2-Sb—Mo electrodes.X-ray d...The Ti/SnO2-Sb-Mo electrodes doped with different molar ratios of molybdenum(Mo) were prepared by sol—gel method in order to investigate the effect of Mo on the characterization of Ti/SnO2-Sb—Mo electrodes.X-ray diffraction(XRD),field-emission scanning electron microscopy(FE-SEM),energy dispersive spectrometry(EDS),and linear scanning voltammetry(LSV) were used to scrutinize the coating material and the electrochemical activity.The concentration of phenol,the value of total organic carbon(TOC),the mineralization current efficiency(MCE) and the ultraviolet—visible spectroscopy(UV-Vis) spectrum of phenol solution were measured over the electrochemical degradation process of phenol to confirm the phenol degradation characterization of Ti/SnO2-Sb-Mo electrodes.Results showed that the electrode at the Mo content of 1 at.%provided optimal catalytic activity for phenol degradation and the longest life time.The removal percentage of phenol and TOC were 99.62%and82.67%,respectively.The Ti/SnO2-Sb-Mo electrode with 1 at.%of Mo reached maximum MCE of phenol oxidation.The kinetic investigation of phenol and TOC degradation displayed the pseudo-first order reaction model.The Ti/SnO2-Sb-Mo electrode coating with 7 at.%Mo presented the highest oxygen evolution overpotential,indicating the diverse effects for different Mo molar ratio doping.展开更多
A simple, cost effective and rapid electrochemical method has been developed for the determination of micro level ortho nitrobenzaldehyde(ONB) based on outstanding properties of modified aluminum electrode tin nanor...A simple, cost effective and rapid electrochemical method has been developed for the determination of micro level ortho nitrobenzaldehyde(ONB) based on outstanding properties of modified aluminum electrode tin nanorods/anodic aluminum oxide/aluminum(SnNR/AAO/Al) for the first time. The SnNR/AAO/Al electrode was fabricated by a second step anodization, followed by electrodeposition and its electrochemical behavior was investigated in detail. The cyclic voltammetry results indicated that the SnNR/AAO/Al electrode exhibited efficient electrocatalytic activity toward reduction of ONB in the acidic solution. It provides an appreciable improvement of reduction peak for ONB at-0.721 V.Furthermore, various kinetic parameters such as transfer electron number, transfer proton number and standard heterogeneous rate constant were calculated from the scan rates.The electrocatalytic behavior was further exploited as a sensitive detection scheme for the ONB determination by differential pulse voltammetry. Under the optimized conditions, the concentration range and detection limit are 0.1-100 μmol/L and 0.05 μmol/L, respectively,for ONB. The analytical performance of this modified sensor has been evaluated for detection of real sample such as river water and recovery of ONB was achieved all-out up to102.3% under standard addition method.展开更多
基金Supported by the National Natural Science Foundation of China(No.20211130505) and the Fundamental Research Funds for the Central Universities of China.
文摘A cobalt nanoparticles-attached indium tin oxide(CoNPs/ITO) electrode was applied to the immobilization of hemoglobin(Hb) and an Hb modified CoNPs/ITO electrode(Hb/CoNPs/ITO) was prepared. The direct electron transfer of Hb was shown by the well-behaved voltammetric responses for Hb/CoNPs/ITO electrode and the effects of scan rate and pH value were observed. Based on the catalytic activity of Hb immobilized on the CoNPs/ITO electrode toward the reduction of H2O2, a mediator-free H2O2 sensor was developed. A linear relationship existed between the catalytic current and the H2O2 concentration in a range of 1.0--100.0 μmol/L with a detection limit (S/N=3) of 0.2μmol/L.
文摘In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displayed on the liquid crystal display (LCD) immediately.In this study,the basic sensor was the tin oxide pH electrode,which was fabricated by radio frequency (r.f.) sputtering system on the indium tin oxide (ITO)/glass substrate.Moreover,the major blocks of the system consist of the tin oxide electrode-based ion selective electrodes (ISEs),an analog front-ended readout circuit,a microcontroller with built-in analog to digital (A/D) converter.In addition,by the embedded system design,the measurement results can be transmitted to a portable system or computer through the Universal Serial Bus (USB) and Universal Asynchronous Receiver Transmitter (UART) interface immediately.According to the experimental results,the multi-sensing system has high performance and reliability for pH,K^+,and Na^+ detection.
基金Authors greatly appreciate the supports from the National Natural Science Foundation of China Returnee Foundation of Ministry of Education of China and Analytical Foundation of Nanjing University.
文摘s: A new method for the preparation of an organic-inorganic composite film of the heteropolyanion has been developed by modifying P(Mo2O7)6-7 to the indium tin oxide (ITO) electrode surface. The modified electrode displayed a strong catalytic activity towards the reduction of IO3-. In the range of 1.0?0-6~5?0-4mol/L, the catalytic current was linear proportional to the IO3- concentration.
文摘This paper presents the studying results of the sodium ion sensor device based on the SnO_2/ITO glass structure in the detection of rinsing solution for contact lenses.The selective membrane contains poly (vinyl chloride) (PVC),bis (2-ethylhexyl) sebacate (DOS),(12-crown-4) methylmalonate (B12C4),and sodium tetrakis (4-fluoropbenyl) borate dehydrate (NaTFBD). The final weight ratios are PVC:DOS:B12C4:NaTFBD=33:66:2:2.In this condition,the sensor has performances with linear sensitivity,short response time,good repeatability and selectivity.The sensor was used to measure the rinsing solution for the contact lenses.Because the experimental results show close to the accurate value for four commercial products,this sensor can preliminary be used in detecting the rinsing solution for the contact lenses.Using this structure and sodium-sensing membrane to construct the sodium sensor is proven successfully in this application.
基金financial support from the China Environmental Protection Foundation,Geping Green ActionLiaoning Environmental Research and Education Fund "123 Project"(Grant No.CEPF2012-123-2-10)
文摘The Ti/SnO2-Sb-Mo electrodes doped with different molar ratios of molybdenum(Mo) were prepared by sol—gel method in order to investigate the effect of Mo on the characterization of Ti/SnO2-Sb—Mo electrodes.X-ray diffraction(XRD),field-emission scanning electron microscopy(FE-SEM),energy dispersive spectrometry(EDS),and linear scanning voltammetry(LSV) were used to scrutinize the coating material and the electrochemical activity.The concentration of phenol,the value of total organic carbon(TOC),the mineralization current efficiency(MCE) and the ultraviolet—visible spectroscopy(UV-Vis) spectrum of phenol solution were measured over the electrochemical degradation process of phenol to confirm the phenol degradation characterization of Ti/SnO2-Sb-Mo electrodes.Results showed that the electrode at the Mo content of 1 at.%provided optimal catalytic activity for phenol degradation and the longest life time.The removal percentage of phenol and TOC were 99.62%and82.67%,respectively.The Ti/SnO2-Sb-Mo electrode with 1 at.%of Mo reached maximum MCE of phenol oxidation.The kinetic investigation of phenol and TOC degradation displayed the pseudo-first order reaction model.The Ti/SnO2-Sb-Mo electrode coating with 7 at.%Mo presented the highest oxygen evolution overpotential,indicating the diverse effects for different Mo molar ratio doping.
基金CSIR (09/0810 (0021)/ 2012-EMR-I), Periyar University for providing fundUGC networking resource center for providing visiting fellowship
文摘A simple, cost effective and rapid electrochemical method has been developed for the determination of micro level ortho nitrobenzaldehyde(ONB) based on outstanding properties of modified aluminum electrode tin nanorods/anodic aluminum oxide/aluminum(SnNR/AAO/Al) for the first time. The SnNR/AAO/Al electrode was fabricated by a second step anodization, followed by electrodeposition and its electrochemical behavior was investigated in detail. The cyclic voltammetry results indicated that the SnNR/AAO/Al electrode exhibited efficient electrocatalytic activity toward reduction of ONB in the acidic solution. It provides an appreciable improvement of reduction peak for ONB at-0.721 V.Furthermore, various kinetic parameters such as transfer electron number, transfer proton number and standard heterogeneous rate constant were calculated from the scan rates.The electrocatalytic behavior was further exploited as a sensitive detection scheme for the ONB determination by differential pulse voltammetry. Under the optimized conditions, the concentration range and detection limit are 0.1-100 μmol/L and 0.05 μmol/L, respectively,for ONB. The analytical performance of this modified sensor has been evaluated for detection of real sample such as river water and recovery of ONB was achieved all-out up to102.3% under standard addition method.