Cavity noise sensitivity analysis of tire contour design factors and application of contour optimization methodology

Cavity resonance noise of passenger car tires is generated by interacting excitation between a tire structure and the fill gas (air), and generally lies in a frequency range of 200?250 Hz. As such, this noise is strongly perceived and may be a serious source of driver annoyance. Thus, many studies regarding the cavity noise mechanism and its reduction have already been conducted. In this work, a vibro-acoustic coupled analysis was conducted between a tire structure and air cavity. Using this analysis, we can more accurately simulate the tire noise performance in the region of the cavity resonance frequency. An analysis of the effects of variation of tire contour design factors was conducted, using design-of-experiments methods. Finally, a multi-objective optimization was performed using in-house codes to reduce the cavity noise level while minimizing the loss of other performances, such as diminished ride comfort and handling caused by the variations of contour. As a result of this optimization, an optimized contour shape was derived, which satisfied the multi-objective performances.

Effects of geometric design of forest road and roadside vegetation on traffic noise reduction

Geometric design of forest roads and design of their landscapes can reduce noise pollution and its harmful effects on human health. We investigated the effects of technical and biological parameters such as geometric road design and various roadside tree stands on reducing noise pollution according to the tree density and distance from roadway in Darabkola Forests, Sari, Iran. We recorded the noise generated by a car （Land Rover） relative to changes in longitudinal slope, horizontal curve radius and type of road pavement. We also measured noise levels according to roadside tree density and stand type （coniferous and hardwood） in 40 rectangular plots of three widths （25, 100 and 300 m） and 50 m length that were randomly demar- cated along forest roads. The changes in noise level were recorded using a decibel meter with an accuracy of q-1.5 dB and resolution of 0.1 dB. Noise levels were higher alongside unpaved roads than alongside paved roads. There was an inverse relationship between the measured noise level and horizontal curve radius. The rate of noise level on horizontal curve with a radius less than 30, 30-45 m and more than 45 m were 64.8, 70.8 and 75.9 dB, respectively. The noise level increased with the increasing longitudinal slope of the road. There was a significant difference between the noise level on slopes less than 3 % （67 dB） and 3-8 % （71.2 dB） in comparison with slopes greater than 8 % （77.8 dB）, （p 〈 0.05）. Pinus brutia L. reduced the noise level more （about 6 dB） in stands of 1/3 density of mixed hardwoods within 25 m from middle of the road. Careful design of geometric properties of forest roads as well as planting coniferous trees with hardwoods is a suitable solution for reducing noise pollution.

Noise Impact and Improvement on Indoors Acoustic Comfort for the Building Adjacent to Heavy Traffic Road

A good acoustic environment is absolutely essential to maintaining a high level satisfaction and moral health among residents. Noise and other boresome sounds come from both in- door and outdoor sources. For the residential buildings adjacent to heavy traffic roads, outdoors traffic noise is the main source that affects indoor acoustic quality and health. Ventilation and outdoor noise prevention become a pair of contradictions for the residents in China nowadays for those buildings adjacent to heavy traffic roads. It is investigated that traffic noise emission is mainly con- stituted by the motors of trucks, buses and motorcycles as well as brake. In this paper, two methods of traffic noise reduction on the indoor sound environment and comfort are carried out to study and compare the residential buildings adjacent to heavy traffic roadway in a city. One is to install noise barriers on the two sides of the roadway, which consist of sound-proof glass and plas- tic materials. The effect of sound-insulation of this method is heavily dependent on the relative distance between the noise bar- rier and indoors. A reduction of sound with an average pressure level of 2–15dB is achieved on the places behind and under the noise barrier. However, for the equivalent of noise barrier height, the noise reduction effect is little. As for the places of higher than the noise barrier, the traffic noise will be even strengthened by 3–7dB. Noise increment can be seen at the points of distance farther than 15m and height more than noise barrier; the noise reduction effect is not satisfactory or even worsened. In addition, not every location is appropriate to install the noise barrier along the heavy traffic roads. The other method of noise reduction for the buildings adjacent to heavy traffic is to install the airproof and soundproof windows, which is the conversion from natural venti- lation to mechanical ventilation. A reduction of sound with an average pressure level of 5dB to 17dB can be achieved compared with common glass windows, if adopting sound proof glass win- dows. These two methods are helpful to isolate high frequency noise but not for low frequency noise. For those frequency noises, installing thick and cotton curtain and porous carpet can only decrease 2.4–4.5dB, which hardly contributes to indoor sound comfort, so further study is demanded to cut down traffic noise, especially to cut down the low frequency noise.

Appraisal of Urban Road Traffic Noise in tier-II City(Surat City),India

Urban road traffic noise pollution has always been identified as a severe problem that affects urban populants.In developing nation,road traffic noise pollution depends on the composition of heterogeneous traffic composition.These traffic compositions contain vehicles,which have different sizes,speeds variations,a different dimension of vehicles.Environmental noise measurements have been carried out during day-time and night-time in different locations of tier-II city of India.The noise levels have been continuously measured over 24 h periods using kimo DB 300 class-2 noise level meter.The data contained in this research paper represent 768 measurement hours.All the information has been used to investigate the time patterns of the noise levels under a wide range of different conditions and to study the relationships between noise levels and traffic in urban areas.Maximum LAeq was observed 73.3 dB(A)at B_(14) location and the minimum was recorded 65.7 dB(A)at C_(3) location,which was greater than the central pollution control board(CPCB)prescribed limits during night time.A major reason for the generation of road traffic noise is due to the equal composition of 2-wheeler and 4-wheeler on the arterial road and heavy vehicles were recorded during morning peak and evening peak even though they are prohibited during peak hours.

Urban avifauna distribution explained by road noise in an Eastern European city

In Eastern Europe,efforts are being made for road infrastructure development,as this area has not yet reached the level of that in the West.Road noise negatively affects birds,especially in urban habitats.Therefore,seven green spaces from an Eastern European city were monitored,which were selected according to the urbanization gradient and the hydrographic peculiarities of the area.The correlation between species richness and human population density,urban mobility,or road noise was verified.These three factors together explained over 99%of species richness distribution in habitats and during study periods.Road noise was the strongest predictor and the most negative influencer of bird species.These correlations were higher when we also considered the variability of species in habitats over time,instead of the total species richness of a habitat,as it expresses more accurately the impact of noise on the presence of species.The presence of species has decreased from one habitat to another along the urbanization gradient,from the edge of the city to the center,both in the case of terrestrial and aquatic green spaces.The most central park differed significantly from the other terrestrial green spaces in the city.At the same time,no significant differences were registered between the aquatic habitats or the rest of the terrestrial habitats.The ideal mitigation measure in this case would be that there are no roads in the immediate vicinity of green spaces.Still,if this is not possible(as in the case of all the existing green spaces in a city),we discuss/recommend placing noise barriers at the edge of green spaces or high-speed roads.

Analysis of Road Traffic Noise Pollution around a University in Binzhou

The number of automobiles in the urban area of Binzhou City continues to increase,and traffic noise pollution is increasingly serious. In this study,noise pollution on Huanghe 5 Road near the south gate of Binzhou University was monitored. The results showed that the road noise pollution on Huanghe 5 Road was relatively serious on the whole,especially in the peak periods of traffic flow in the morning and afternoon,because the increase in the number of pedestrians brought inconvenience to traffic,thereby resulting in an increase in car whistle.

Mathematical Models of Tire-Longitudinal Road Adhesion and Their Use in the Study of Road Vehicle Dynamics

Mathematical models of tire-longitudinal road adhesion for use in the study of road vehicle dynamics are set up so as to express the relations of longitudinal adhesion coefficients with the slip ratio. They perfect the Pacejka's models in practical use by taking into account the influences of all essential parameters such as road surface condition. vehicle velocity. slip angle. vertical load and slip ratio on the longitudinal adhesion coefficients. The new models are more comprehensive more concise. simpler and more convenient in application in all kinds of simulations of car dynamics in various sorts of braking modes.

Noise system在道路工程声环境影响预测中的应用研究

采用Noise system模型软件预测城市道路工程对周围敏感目标的影响。通过预测,拟建道路沿线路中心线两侧200 m范围内随距离增大受交通噪声影响呈明显衰减趋势。从路段达标距离分析,相对于昼间噪声达标距离,夜间噪声达标距离均大于昼间的达标距离,说明拟建道路夜间交通噪声影响大于昼间;沿线敏感点近期、中期、远期昼间、夜间噪声预测值均能满足《声环境质量标准》(GB 3096-2008)中2类、4a类标准;通过对首排在建小区均为3层以上建筑物不同垂直高度的影响进行预测,对居民区不会造成影响。

Tire Road Friction Coefficient Estimation:Review and Research Perspectives

Many surveys on vehicle traffic safety have shown that the tire road friction coefficient(TRFC)is correlated with the probability of an accident.The probability of road accidents increases sharply on slippery road surfaces.Therefore,accurate knowledge of TRFC contributes to the optimization of driver maneuvers for further improving the safety of intelligent vehicles.A large number of researchers have employed different tools and proposed different algorithms to obtain TRFC.This work investigates these different methods that have been widely utilized to estimate TRFC.These methods are divided into three main categories:off-board sensors-based,vehicle dynamics-based,and data-driven-based methods.This review provides a comparative analysis of these methods and describes their strengths and weaknesses.Moreover,some future research directions regarding TRFC estimation are presented.

Road Friction Coefficient Real-Time Identification Based on the Tire Dynamic Friction Model

Road friction coefficient real-time estimation methods is an important issue and problem in automotive active safety con- trol system development. First a fixed feedback gain sliding mode observer of road adhesion coefficient is designed through the es-tablishment of tire/road dynamic friction model in this article. The simulation results shows that the observer can well real-time iden-tify the current road adhesion characteristics. And more importantly, the observer only need wheel speed signal and the braking torque （brake pressure） signal, so the system is low cost, and its adaptability is good. There is no doubt this estimation method has a good application prospect.

Noise Reduction in Pavement Made of Rubberized Bituminous Top Layer

In Greece more than 60,000 tn End of Life Tires are stockpiled every year often uncontrollable, causing severe environmental and other socio-economic negative impacts. Studies up to date are focused mainly on mechanical and physical characteristics of rubberized mixtures (based on cement, asphalt or soil) in which tire rubber is used either as alternative to natural aggregates or as additive. However, effect of tire rubber on noise reduction in rubberized bituminous layers, which is the main topic of present paper, has not been widely studied. In particular, this research paper is dealing with a sustainable use of tire rubber in asphalt pavement, leading to its generated noise reduction. An experimental pilot application has been conducted in the frame of a European Research Project, which has been implemented in a heavy traffic road section, cited outside Lamia city of Greece, (Vasilikon Street). The upper surface layer of the pavement has been made of rubberized bituminous mixture, produced by the wet process. Rheological characteristics of rubberized bitumen as well as basic properties of the implemented, rubberized bituminous mixture are presented. Moreover, measurements of noise level, deriving from vehicles’ motion, under operational conditions took place at the road section right after its implementation as well as after 8 months of its operation, while all data are presented in details. Results of the measurements on conventional and modified pavement sections are compared, certifying that rubberized asphalt layers can be not only environmentally friendly—since a category of solid wastes (worn automobile tires) is utilized—but also, addition of tire rubber particles in bituminous binder provides up to 3dB noise reducing bituminous mixtures and pavements, noise reduction that remains even after 8 months of road section’s operation.

“Noisy”issues in road acoustics:A white paper

Despite almost a century of studies dealing with traffic noise,researchers and practitioners still face old and new issues when designing a low-noise pavement.Given that,this manuscript aims at focusing on a number of unsolved questions,namely theoretical or technological.1)Is it viable to balance diverse road-related needs(i.e.,noise,expected life,texture levels,and friction)?2)How much does the pavement material affect its acoustic performance(the remaining factors being constant)?3)How much reliable is the relationship between road texture and mixture aggregate gradation?Based on the analysis of these issues,it emerges that:1)optimal pavement design involves complex mix optimization and there are theoretical and practical bases to set up a balanced approach to address the complexity of pavement design;2)high percentages of crumb rubber could optimise road acoustic response but this latter has a relationship with the tyre/road noise(expressed,for example,in terms of close proximity index)that calls for further investigation;3)aggregate gradation appears to be a reliable basis to predict surface texture and therefore,under given boundary conditions,tyre/road noise;and 4)further studies and investigations are needed in terms of local calibration of deterioration curves and setting up of a sound method to assess the frequency response of asphalt concretes and to govern on-site noise indicators based on mixture properties.

Influence of Road Wetness on Tire-Pavement Rolling Resistance

Rolling resistance of tires is one of the most important factors influencing energy consumption of road vehicles, especially on rural roads. For practical reasons, most of rolling resistance measurements are usually performed for dry road conditions. Based on the fact that roads are wet during a considerable time over the year and as part of the projects MIR/AM, ROLRES and ROSANNE, the TUG （Technical University of Gdafisk） in Poland and VTI （Swedish National Road and Transport Research Institute） in Sweden carried out trailer rolling resistance measurements on wet road surfaces to investigate water film influence on rolling resistance on different pavements. A specially-designed trailer to measure rolling resistance has been used. The test sections were both rural roads and an abandoned airfield equipped with water film sensors mounted in the pavement. Results indicate strong influence of test speed and water film depth, as well as influence of surface texture. The increase of rolling resistance on wet surfaces is caused by both hydrodynamic phenomena and cooling effect of water that decreases tire temperature thus increasing rolling resistance.

Research on the Tire / Road Dynamic Friction Characteristics

The precise and accurate control of the friction between tire and road is the foundation of the vehicle driving conditions furthest utilization and vehicle dynamics control. First the tire/road longitudinal and lateral dy- namic friction characteristics is studied in this paper. The lumped, distributed and lumped average dynamic tire models are established; Then the steady-state LuGre dynamic tire model characteristics is studied and was com- pared with magic formulas tire model, etc. to verify the reliability of the model. The results showed that the LuGre model can express tire dynamic friction characteristics. The tire dynamics study in this paper has impor- tant significance for the tire mechanics and automotive electronic control system development.

FTire模型的建立方法研究

在熟悉FTire模型结构及其特性基础上,提出一种基于虚拟样机软件ADAMS的建立方法,并通过适当的测试模型参数,建立了子午线轮胎的FTire模型。通过分析不同间距的三维等效容积路面仿真统计数据,可知FTire模型可以根据需求自动划分网格,但其最佳网格间距为20 mm。FTire模型的建立为进一步进行车辆动力学分析提供了有效的轮胎模型。

压制空间非平稳地震勘探随机噪声的ROAD径向时频峰值滤波算法

径向时频峰值滤波算法是一种有效保持低信噪比地震勘探记录中反射同相轴的随机噪声压制方法,但该算法对空间非平稳地震勘探随机噪声压制效果不理想.本文研究空间非平稳地震勘探随机噪声,即各道噪声功率不同的地震勘探随机噪声,其在径向滤波轨线上表征近似脉冲噪声,在径向时频峰值滤波过程中干扰相邻道滤波结果.为了减小空间非平稳随机噪声的影响,本文提出一种基于绝对级差统计量(ROAD)的径向时频峰值滤波随机噪声压制方法.该方法首先根据径向轨线上信号的绝对级差统计量检测空间非平稳地震勘探随机噪声,然后结合局部时频峰值滤波和径向时频峰值滤波压制地震勘探记录中的随机噪声.将ROAD径向时频峰值滤波方法应用于合成记录和实际共炮点地震记录,结果表明ROAD径向时频峰值滤波方法可以压制空间非平稳地震勘探随机噪声且不损害有效信号,有效抑制随机噪声空间非平稳对滤波结果的影响.与径向时频峰值滤波相比,ROAD径向时频峰值滤波方法更适用于空间非平稳地震勘探随机噪声压制.

Developing a Durable Quiet Road Surface

Road traffic noise can have a significant impact on the quality of life for residents close to major road networks.One of the most effective measures for reducing the noise from road traffic,particularly on high-speed roads,is to ensure the use of a low noise road surface.Research on pavement construction and the measurement of its acoustic properties has shown that significant noise reductions can be achieved through the use of certain road surface types.However certain low noise road surfaces do not exhibit the desired durability associated with more traditional pavements,leading to costly and disruptive maintenance regimes.This article looks at the mechanisms involved in tyre/road noise generation and how these interact with various road surface properties including a brief overview of some common surface types.It then goes on to explain how these concepts informed the development of an asphalt surfacing material with enhanced durability and good acoustic performance without compromising safety.Progress in testing the resulting Premium Asphalt Surfacing System(PASS)is outlined,including the completion of a successful network trial.

Determination of the Sound Absorption Capacity of Hydraulic Concrete Mixtures Added with Waste Tire Rubber

There are different types of pollutants that are harmful to the environment, including smog, chemicals that are dumped into rivers, scrap tires, etc. The latter have the particularity that it is not possible to recycle them to manufacture new tires. In the present work, hydraulic concrete plates added with waste tire rubber were manufactured to modify their sound absorption capacity. It was found that the rubber additions produce changes in the density of the material and in the sound absorption capacity. When the material is exposed to high-frequency sounds that correspond to high-pitched sounds, its absorption capacity increases. On the contrary, when the test frequency is low, that is, bass sounds, the sound absorption capacity decreases. The results obtained in this work suggest that the proposed mixtures are suitable for the possible manufacture of acoustic insulating shields.

New Adaptive Approach for Road Condition Identification in ASR Control System

A novel tire-road adaptive model in longitude direction to formulate the dynamic characteristic between tire and road is proposed in this paper, based on this model, a new adaptive approach of road condition identification is presented to identify the model＇s parameters on-line in order to improve the performance of anti-slip regulation system（ASR）. The optimal slip is determined by using the drive wheel＇s slip and longitude traction force in ASR before the slipping of the drive wheel. Co-simulation is done based on the model for JETTA GTX building with ADAMS/CAR and Matlab, and results show that the adaptive model accords with Pacejka model very well. This adaptive model has simpler form, less number of parameters and higher adaptability than usual, and the new identification approach has a small amounts of operation, which is very suitful for ASR.

The Effect of Tire Design Parameters on the Force Transmissibility

A finite element modeling technique is employed in this paper to predict the force transmissibility of tire-cavity-wheel assembly under a free-fixed condition. The tire and wheel force transmissibility is factor in structure borne road noise performance. In order to improve structure borne noise, it is required to lower the 1st peak frequency of force transmissibility. This paper presents an application of finite element analysis modeling along with experimental verification to predict the force transmissibility of tire and wheel assembly. The results of finite element analysis for force transmissibility are shown to be in good agreement with the results from the indoor test. In order to improve structure borne noise, it is required to lower the 1st peak frequency of force transmissibility. And, the effect of the tire design parameters such as the density and modulus of a rubber and the cord stiffness on the force transmissibility is discussed. It is found that the prediction of the force transmissibility model using finite element analysis will be useful for the improvement of the road noise performance of passenger car tire.