The nanoscale titania coated silica was prepared via a two-step precipitating approach, where the nanoscale silica nuclei were first prepared by passing an aqueous solution of sodium silicate through an ion-exchange r...The nanoscale titania coated silica was prepared via a two-step precipitating approach, where the nanoscale silica nuclei were first prepared by passing an aqueous solution of sodium silicate through an ion-exchange resin bed, then coated with the precipitation from hydrolyzed butyl titanate in an ethanol-hexane mixture at a low pH value in the presence of poly(ethylene oxide) polyamine salt(PPA) at a high temperature of 90 ℃. In the second-step precipitating process, the spontaneously precipitated titania shell on the silica nuclei was stabilized in the suspension solution with the help of the adsorption of PPA on the particles. A possible precipitating mechanism was suggested. Furthermore, the amorphous titania shell could undergo crystallization from the amorphous to the anatase structure at a high temperature of 650 ℃, and a further phase transition from the anatase to the rutile structure in the different sintering processes at a rising temperature of 750 ℃.展开更多
Nanocrystalline powders of w(Al2O3)=95%, w(TiO2)=3%, and w(SiO2)=2%, were reprocessed into agglomerated particles for plasma spraying, by using consecutive steps of ball milling, slurry forming, spray drying, and heat...Nanocrystalline powders of w(Al2O3)=95%, w(TiO2)=3%, and w(SiO2)=2%, were reprocessed into agglomerated particles for plasma spraying, by using consecutive steps of ball milling, slurry forming, spray drying, and heat treatment. D. C. plasma was used to spray the agglomerated nanocrystalline powders, and resultant coatings were deposited on the substrate of stainless steel. Scanning electron microscopy (SEM) was used to examine the morphology of the agglomerated powders and the cross section of the alumina-titania-silica coatings. Exper-imental results show that the agglomerated nanocrystalline particles are spherical, with a size from (10 - 90)μm. The flow ability of the nanocrystalline powders is greatly improved after the reprocessing. The coatings deposited by the plasma spraying are mainly of nanostructure. Unlike conventional plasma-sprayed coatings, no laminar layer could be found in the nanostructured coatings. Although the nanostructured coatings have a lower microhardness than conventional microstructured coatings, the toughness of the nanostructured ceramic coatings is significantly improved.展开更多
The photocatalyic activity of titania is a very promising mechanism that has many possible applications like purification of air and water [1]-[4]. To make it even more attractive, titania can be combined with silica ...The photocatalyic activity of titania is a very promising mechanism that has many possible applications like purification of air and water [1]-[4]. To make it even more attractive, titania can be combined with silica to increase the photocatalytic efficiency and durability of the photocatalytic material, while lowering the production costs [1]. In this article, relevant literature is reviewed to obtain an overview about the chemistry and physics behind some of the different parameters that lead to cost-effective photocatalytic titania-silica composites. The first part of this review deals with the mechanisms involved in the photocatalytic activity, then the chemistry behind certain methods for the synthesis of the titania-silica composites is discussed, and in the last and third part of this review, the influence of silica supports on titania is discussed. These three sections represent three different fields of research that are combined in this review to obtain better insights on the photocatalytic titania-silica composites. While many research subjects in these fields have been well known for some time now, some subjects are only more recently resolved and some subjects are still under discussion (e.g. the cause for the increased hydrophilic surface of titania after illumination). This article aims to review the most important literature to give an overview of the current situation of the fundamentals of photocatalysis and synthesis of the cost-effective photocatalyic composites. It is found that the most cost-effective photocatalytic titania-silica composites are the ones that have a thin anatase layer coated on silica with a large specific surface area, and are prepared with the precipitation or sol-gel methods.展开更多
Mixture formed from sonicating TiCl4 and Si(OEt)4 in the absence of water is used as precursor and hydrolyzed by using a long-chain organic ammonium bromide as a structure-directing agent. The product, titania-silica,...Mixture formed from sonicating TiCl4 and Si(OEt)4 in the absence of water is used as precursor and hydrolyzed by using a long-chain organic ammonium bromide as a structure-directing agent. The product, titania-silica, is of mesoporous structure and characterized with SEM, FT-IR, BET, XRD and so on.展开更多
The electrorheological (ER) fluids are colloidal suspension of highly polarizable particles in a non-conducting solvent. Chains of submicron-sized particles formed along an applied DC electric field by the so-called e...The electrorheological (ER) fluids are colloidal suspension of highly polarizable particles in a non-conducting solvent. Chains of submicron-sized particles formed along an applied DC electric field by the so-called electrorheological effect. According to the obvious change of transmittance of the ER fluids in a DC electric field when the polarized particles arranged along the field, the model of smart window was proposed by sandwiching the ER fluids based on titania particles coated with silica between a pair of In-Sn oxide (ITO) coated glasses. The solar transmittance change as much as 48.0% was obtained with the wavelength of 500 nm at the maximum on applying and removing the electric field of 500 V/mm.展开更多
A γ-Fe2O3-SiO2 composite was prepared by sol-gel method followed by calcination at 700 ℃ for 30 min starting from tetraethoxysilane and iron nitrate.Upon further coating with SiO2 and TiO2,a TiO2/SiO2/（γ-Fe2O3）-S...A γ-Fe2O3-SiO2 composite was prepared by sol-gel method followed by calcination at 700 ℃ for 30 min starting from tetraethoxysilane and iron nitrate.Upon further coating with SiO2 and TiO2,a TiO2/SiO2/（γ-Fe2O3）-SiO2 magnetic photocatalyst was obtained.XRD results show that Fe in the composite converts to the（γ-Fe2O3） phase up to a processing temperature of 700 ℃,and further increase in temperature results in the formation of the（α-Fe2O3） phase.The TiO2/SiO2/（γ-Fe2O3）-SiO2 samples obtained are monodisperse spherical particles with 200～250 nm diameter,well coated firstly by an amorphous SiO2 layer and then by an anatase TiO2 layer.The TiO2/SiO2/（γ-Fe2O3）-SiO2 particles retain their magnetic property well and show high activity for the photocatalytic degradation of salicylhydroxamic acid.展开更多
基金Supported by the State Key L aboratory of Shanghai Institute of Ceram ics and State Key L aboratory of Surface Physicsin China
文摘The nanoscale titania coated silica was prepared via a two-step precipitating approach, where the nanoscale silica nuclei were first prepared by passing an aqueous solution of sodium silicate through an ion-exchange resin bed, then coated with the precipitation from hydrolyzed butyl titanate in an ethanol-hexane mixture at a low pH value in the presence of poly(ethylene oxide) polyamine salt(PPA) at a high temperature of 90 ℃. In the second-step precipitating process, the spontaneously precipitated titania shell on the silica nuclei was stabilized in the suspension solution with the help of the adsorption of PPA on the particles. A possible precipitating mechanism was suggested. Furthermore, the amorphous titania shell could undergo crystallization from the amorphous to the anatase structure at a high temperature of 650 ℃, and a further phase transition from the anatase to the rutile structure in the different sintering processes at a rising temperature of 750 ℃.
基金This work was supported by the Prionrity Development Program of the Hunan Resources Ministry of China for Oversea Students.
文摘Nanocrystalline powders of w(Al2O3)=95%, w(TiO2)=3%, and w(SiO2)=2%, were reprocessed into agglomerated particles for plasma spraying, by using consecutive steps of ball milling, slurry forming, spray drying, and heat treatment. D. C. plasma was used to spray the agglomerated nanocrystalline powders, and resultant coatings were deposited on the substrate of stainless steel. Scanning electron microscopy (SEM) was used to examine the morphology of the agglomerated powders and the cross section of the alumina-titania-silica coatings. Exper-imental results show that the agglomerated nanocrystalline particles are spherical, with a size from (10 - 90)μm. The flow ability of the nanocrystalline powders is greatly improved after the reprocessing. The coatings deposited by the plasma spraying are mainly of nanostructure. Unlike conventional plasma-sprayed coatings, no laminar layer could be found in the nanostructured coatings. Although the nanostructured coatings have a lower microhardness than conventional microstructured coatings, the toughness of the nanostructured ceramic coatings is significantly improved.
文摘The photocatalyic activity of titania is a very promising mechanism that has many possible applications like purification of air and water [1]-[4]. To make it even more attractive, titania can be combined with silica to increase the photocatalytic efficiency and durability of the photocatalytic material, while lowering the production costs [1]. In this article, relevant literature is reviewed to obtain an overview about the chemistry and physics behind some of the different parameters that lead to cost-effective photocatalytic titania-silica composites. The first part of this review deals with the mechanisms involved in the photocatalytic activity, then the chemistry behind certain methods for the synthesis of the titania-silica composites is discussed, and in the last and third part of this review, the influence of silica supports on titania is discussed. These three sections represent three different fields of research that are combined in this review to obtain better insights on the photocatalytic titania-silica composites. While many research subjects in these fields have been well known for some time now, some subjects are only more recently resolved and some subjects are still under discussion (e.g. the cause for the increased hydrophilic surface of titania after illumination). This article aims to review the most important literature to give an overview of the current situation of the fundamentals of photocatalysis and synthesis of the cost-effective photocatalyic composites. It is found that the most cost-effective photocatalytic titania-silica composites are the ones that have a thin anatase layer coated on silica with a large specific surface area, and are prepared with the precipitation or sol-gel methods.
文摘Mixture formed from sonicating TiCl4 and Si(OEt)4 in the absence of water is used as precursor and hydrolyzed by using a long-chain organic ammonium bromide as a structure-directing agent. The product, titania-silica, is of mesoporous structure and characterized with SEM, FT-IR, BET, XRD and so on.
基金The authors greatly appreciated financial support from the National Natural Science Foundation of China mostly under projecl No.59672011 the Foundation for the Youth Faculty at UEST of China partially.
文摘The electrorheological (ER) fluids are colloidal suspension of highly polarizable particles in a non-conducting solvent. Chains of submicron-sized particles formed along an applied DC electric field by the so-called electrorheological effect. According to the obvious change of transmittance of the ER fluids in a DC electric field when the polarized particles arranged along the field, the model of smart window was proposed by sandwiching the ER fluids based on titania particles coated with silica between a pair of In-Sn oxide (ITO) coated glasses. The solar transmittance change as much as 48.0% was obtained with the wavelength of 500 nm at the maximum on applying and removing the electric field of 500 V/mm.
文摘A γ-Fe2O3-SiO2 composite was prepared by sol-gel method followed by calcination at 700 ℃ for 30 min starting from tetraethoxysilane and iron nitrate.Upon further coating with SiO2 and TiO2,a TiO2/SiO2/（γ-Fe2O3）-SiO2 magnetic photocatalyst was obtained.XRD results show that Fe in the composite converts to the（γ-Fe2O3） phase up to a processing temperature of 700 ℃,and further increase in temperature results in the formation of the（α-Fe2O3） phase.The TiO2/SiO2/（γ-Fe2O3）-SiO2 samples obtained are monodisperse spherical particles with 200～250 nm diameter,well coated firstly by an amorphous SiO2 layer and then by an anatase TiO2 layer.The TiO2/SiO2/（γ-Fe2O3）-SiO2 particles retain their magnetic property well and show high activity for the photocatalytic degradation of salicylhydroxamic acid.
