期刊文献+
共找到49篇文章
< 1 2 3 >
每页显示 20 50 100
Adsorptive Recovery of Uranium from Nuclear Fuel Industrial Wastewater by Titanium Loaded Collagen Fiber 被引量:5
1
作者 CHENG YuanMei SUN Xia +1 位作者 LIAO Xuepin Sill Bi 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2011年第4期592-597,共6页
Effective recovery of UO2+2 from wastewater is essential for nuclear fuel industry and related industries.In this study,a novel adsorbent was prepared by loading titanium(Ti4+) onto collagen fiber(TICF),and its physic... Effective recovery of UO2+2 from wastewater is essential for nuclear fuel industry and related industries.In this study,a novel adsorbent was prepared by loading titanium(Ti4+) onto collagen fiber(TICF),and its physical and chemical properties as well as adsorption to UO2+2 in nuclear fuel industrial wastewater were investigated.It is found that TICF can effectively recover UO2+2 from the wastewater with excellent adsorption capacity.The adsorption capacity is 0.62 mmol·g-1 at 303 K and pH 5.0 when the initial concentration of UO2+2 is 1.50 mmol·L-1.The adsorption isotherms can be described by the Langmuir equation and the adsorption capacity increases with temperature.The effect of co-existed F on the adsorption capacity for UO2+2 is significant,which can be eliminated by adding aluminum ions as complexing agent,while the other co-existed ions in the solutions,including HCO-3,Cl-,NO-3,Ca2+,Mg2+ and Cu2+,have little effect on the adsorption capacity for UO2+2.The saturated TICF after UO2+2 adsorption can be regenerated by using 0.2 mol·L-1 nitrate(HNO-3) as desorption agent,and the TICF can be reused at least three times.Thus the TICF is a new and effective adsorbent for the recovery of UO2+2 from the wastewater. 展开更多
关键词 二氧化铀 吸附回收 工业废水 胶原纤维 核燃料 LANGMUIR方程 吸附能力
下载PDF
Synthesis, Spectral and Antimicrobial Studies of Bis (Cyclopentadienyl) Titanium (IV) Bis (O,O’-Dialkyl and Alkylenedithiophosphate) Complexes 被引量:1
2
作者 Adnan A. S. El Khaldy Florence Okafor Alaa M. Abu Shanab 《International Journal of Organic Chemistry》 2014年第5期339-346,共8页
A new complexes of Cp2Ti[S2P(OR)2]2 (where R = Et, Pr-n, Pr-i, Bu-i and Ph) and Cp2Ti[S2POGO]2 (where G = -CH2CMe2CH2-, -CH2CEt2CH2- and -CMe2CMe2-) were prepared by the dropwise addition of the appropriate O,O’-dial... A new complexes of Cp2Ti[S2P(OR)2]2 (where R = Et, Pr-n, Pr-i, Bu-i and Ph) and Cp2Ti[S2POGO]2 (where G = -CH2CMe2CH2-, -CH2CEt2CH2- and -CMe2CMe2-) were prepared by the dropwise addition of the appropriate O,O’-dialkyl or -alkylenedithiophosphoric acid to biscyclopentadienyl titanium dichloride in 1:2 molar ratio and refluxed in benzene solution. These novel deep red colored complexes were characterized by elemental analyses, molecular weight measurements and spectroscopic techniques (IR., NMR 1H, 13C and 31P NMR). These titanium (IV) dithio complexes have also been screened for their antibacterial activities. 展开更多
关键词 titanium (iv) DIALKYL and Alkylenedithiophosphate COMPLEXES
下载PDF
ELECTROCHEMICAL STUDIES OF TITANIUM(IV)IN 1-METHYL-3-ETHYLIMIDAZOLIUM CHLORIDE
3
作者 Bei Long FANG Department of Chemistry.Zhongshan University,Guangzhou.510275 《Chinese Chemical Letters》 SCIE CAS CSCD 1993年第12期1105-1108,共4页
A Titanium tetrachloride-1-methyl-3-ethytimidazolium chloride melt has been prepared.The reduction process of Ti(IV)appears to be diffusion controlled in the composition of 0.4:1 mole ralio of TiCl_4-1-methyl-3-ethyli... A Titanium tetrachloride-1-methyl-3-ethytimidazolium chloride melt has been prepared.The reduction process of Ti(IV)appears to be diffusion controlled in the composition of 0.4:1 mole ralio of TiCl_4-1-methyl-3-ethylimidazolium chloride and the electrochemical behavior of Ti(IV)shows remarkable compositon dependence. 展开更多
关键词 iv)IN 1-METHYL-3-ETHYLIMIDAZOLIUM CHLORIDE TI ELECTROCHEMICAL STUDIES OF titanium TIC
下载PDF
钛(IV)固溶氧化镁纳米粉体的制备与表征 被引量:2
4
作者 王维 乔学亮 +1 位作者 邱小林 陈建国 《人工晶体学报》 EI CAS CSCD 北大核心 2008年第2期276-279,288,共5页
采用液相共沉淀方法,以Mg(NO3)2.6H2O和Ti(OC4H9)4为起始原料,NH3.H2O为沉淀剂,PEG为分散剂,冰乙酸为修饰剂,制备了钛(IV)固溶氧化镁纳米粉体。利用XRD,XPS和TEM等分析手段对粉体的物相组成、结构和形貌等进行了表征。结果表明Ti... 采用液相共沉淀方法,以Mg(NO3)2.6H2O和Ti(OC4H9)4为起始原料,NH3.H2O为沉淀剂,PEG为分散剂,冰乙酸为修饰剂,制备了钛(IV)固溶氧化镁纳米粉体。利用XRD,XPS和TEM等分析手段对粉体的物相组成、结构和形貌等进行了表征。结果表明Ti4+固溶到MgO的晶格中,物相只有立方晶系的方镁石结构MgO相组成,无其它相存在。所制得的粉体颗粒尺寸小(约40~50 nm)、粒度分布均匀,具有良好的分散性能。 展开更多
关键词 氧化镁 钛固溶 共沉淀 纳米粉体
下载PDF
桥联配体对钛凝胶吸附砷锑性能的影响及机制
5
作者 张皓铭 周畅 +1 位作者 张国洋 张淑娟 《环境化学》 CAS CSCD 北大核心 2024年第4期1254-1263,共10页
针对钛凝胶吸附剂中桥联配体与吸附性能之间的关系不明问题,本文对比考察了由11种配体(有机羧酸类、醇胺类以及双酮类)合成的钛凝胶材料吸附砷(As)、锑(Sb)的性能.乙酰丙酮(AcAc)作为桥联配体合成的钛凝胶材料表现出优异的As、Sb去除能... 针对钛凝胶吸附剂中桥联配体与吸附性能之间的关系不明问题,本文对比考察了由11种配体(有机羧酸类、醇胺类以及双酮类)合成的钛凝胶材料吸附砷(As)、锑(Sb)的性能.乙酰丙酮(AcAc)作为桥联配体合成的钛凝胶材料表现出优异的As、Sb去除能力,其对As(Ⅲ)、As(Ⅴ)、Sb(Ⅲ)和Sb(Ⅴ)的吸附容量分别达到了329、461、584、805 mg·g^(−1)(以钛计),吸附速率分别比无配体组提高了10.1、8.1、11.5、1.9倍.各类配体对钛凝胶吸附容量的提升效果相当,但对吸附速率提升效果差异明显.有机羧酸类配体调控后对As、Sb吸附速率仅为AcAc的30%—60%,而丁二酮等弱配体调控后几乎没有提升吸附速率.与其他配体相比,AcAc的配位能力介于丁二酮和酒石酸、三乙醇胺等强配体之间,其适中的配位能力兼顾了制备过程中抑制钛快速水解和吸附过程中新活性位点的快速释放特性.当AcAc中心碳或端基碳被甲基取代后,烯醇式AcAc的含量以及配位能力降低,进而减弱材料的砷锑吸附性能. 展开更多
关键词 重金属污染 钛凝胶吸附剂 乙酰丙酮 配体 溶胶凝胶法
下载PDF
Olefin Polymerization Behavior of Titanium(IV) Complexes with Fluorinated and Non-fluorinated Aliphatic Phenoxyimine Ligands
6
作者 Vladislav A.Tuskaev Kasim F.Magomedov +9 位作者 Svetlana Ch.Gagieva Dmitry A.Kurmaev Yulia V.Nelyubina Evgenii K.Golubev Maria D.Evseeva Viktor G.Vasil'ev Galina G.Nikiforova Mikhail I.Buzin Vyacheslav S.Bogdanov Boris M.Bulychev 《Chinese Journal of Polymer Science》 SCIE EI CAS CSCD 2024年第1期52-62,I0007,共12页
A series of Ti(Ⅳ) dichloride and dialkoxide com plexes with phenoxyimine ligands containing fluorinated and nonfluorinated aliphatic imine fragments have been synthesized.The molecular structures of complexes 1 and 4... A series of Ti(Ⅳ) dichloride and dialkoxide com plexes with phenoxyimine ligands containing fluorinated and nonfluorinated aliphatic imine fragments have been synthesized.The molecular structures of complexes 1 and 4 were established by single-crystal X-ray diffraction studies.The complexes adopt a distorted octahedral coordination structure around the titanium atom and two oxygen atoms are situated in trans position while two nitrogen atoms and two outgoing ligands(Cl or iPrO) are situated in cis position.Effect of activators(MMAO-12 and combinations Et_nAICl_(3-n)+Bu_(2)Mg) and outgoing ligand(Cl or iPrO) nature on the catalytic activity and properties of the resulting polymers was studied.The Ti complexes,despite the nature of the outgoing ligands(Cl or iPrO) in the presence of Al/Mg activators,was found to display a high ethylene polymerization activity in the range 1600-3830 kg_(polymer)·mol_(Ti)^(-1)·h^(-1)·atm^(-1) with a viscosity average molecular weight(M_v) value in the range 1.1×10~6-7.1×10~6 Dalton(Da).The resulting UHMWPE can be processed by a solventless method into high-strength and high-modulus oriented films.The rheological characteristics of a polymer melt have been studied.The absence of a cross-over point did not allow to compare the values of the molecular weight distribution of polymers obtained on fluorinated and non-fluorinated pre-catalysts,however,the estimation of the entanglement density is in good agreement with the mechanical characteristics of oriented film s.Upon activation with methylalumoxane,the activity of the com plexes decreased very significantly;however,a polymer with a molecular weight of about 12 million Da was obtained.In the process of ethylene/octene-1 copolymerization,fluorine-containing precatalysts showed a clear advantage over non-fluorinated analogues both in activity and in comonomer content. 展开更多
关键词 FI catalysts titanium(iv) (Co)polymerization Al/Mg co-catalyst Ultra-high molecular weight polyethylene
原文传递
2,3,7-三羟基-9-(3,5-二溴-2-羟基)苯基荧光酮-CTMAB胶束荧光熄灭法测定微量钛(IV)
7
作者 黄应平 袁丁 +3 位作者 颜克美 罗光富 李瑞萍 陈百玲 《湖北三峡学院学报》 2000年第2期46-49,共4页
在阳离子表面活性剂存在下 ,依据Ti(IV) - 2 ,3,7-三羟基 - 9- (3,5-二溴 - 2 -羟基 )苯基荧光酮 (简称DBSPF)体系的荧光熄灭效应 ,拟定了一种采用荧光法测定微量钛的新分析方法 在pH5 2~ 6 8的HAc-NaAc缓冲溶液介质中 ,钛 (IV)与DBSP... 在阳离子表面活性剂存在下 ,依据Ti(IV) - 2 ,3,7-三羟基 - 9- (3,5-二溴 - 2 -羟基 )苯基荧光酮 (简称DBSPF)体系的荧光熄灭效应 ,拟定了一种采用荧光法测定微量钛的新分析方法 在pH5 2~ 6 8的HAc-NaAc缓冲溶液介质中 ,钛 (IV)与DBSPF形成 1 :3的无荧光络合物 试剂最大激发波长和发射波长分别为 362nm和 559nm 钛 (IV)含量在 5 0 μg/Ll范围内 ,钛浓度与荧光熄灭量呈现良好的线性关系 ,方法检测线为 (0 1~2 4) μg/ 2 5ml 拟定方法用于合金钢中微量钛的测定 。 展开更多
关键词 荧光熄灭法 DBSPF CTMAB 苯基荧光酮 测定
下载PDF
Kinetic Spectrophotometric Determination of Trace Titanium(Ⅳ) Based on Oxidation Discoloration of Acid Chrome Blue K with Hydrogen Peroxide 被引量:5
8
作者 XIONG Yan ZHOU Zhi-rong WU Fu-hai 《Journal of China University of Mining and Technology》 EI 2007年第3期418-423,共6页
A simple and sensitive kinetic spectrophotometric method for the determination of trace amounts of titanium(IV),based upon the catalytic effect of Ti(IV) on the oxidation of acid chrome blue K (ACBK) by hydrogen perox... A simple and sensitive kinetic spectrophotometric method for the determination of trace amounts of titanium(IV),based upon the catalytic effect of Ti(IV) on the oxidation of acid chrome blue K (ACBK) by hydrogen peroxide in 0.002 mol/L sulfuric acid,is described. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of ACBK at 524 nm. The detection limit of the method is 1.01×10?9 g/mL,and the linear range is 0-0.048 mg/L. The influence of acidity,concentration of reactants,reaction time,reaction temperature and for-eign ions is also discussed. The optimum reaction conditions were established and some kinetic parameters determined. The apparent activation energy of the catalytic reaction is 5.32 kJ/mol. The relative standard deviation for the determi-nation of titanium(IV) at the concentration of 0.048 mg/L is calculated to be 1.31% (n = 11). In combination with sol-vent extraction separation,the method has been successfully applied to the determination of trace titanium(IV) in human hair,plant matter,tea and rock samples. The results are in good agreement with the certified values with the relative standard deviations (RSD) of 1.4%-3.5%. 展开更多
关键词 分光光度技术 过氧化氢 跟踪钛 铬合金
下载PDF
Synthesis and Spectroscopic Characterization of Eight Chloro Cyclopentadienyl Titanium Bis (O, O-Dialkyl and Alkylene Dithiophosphate) Compounds
9
作者 Adnan A. S. El Khaldy Alaa M. Abu Shanab Yannic Boni 《International Journal of Organic Chemistry》 2017年第2期145-152,共8页
A series of new complexes, CpTiCl[S2P(OR)2]2 (where R) Et, n-Pr, i-Pr, Bui, Ph) and CpTiCl [S2POGO]2 (where G) –CH2CMe2CH2-, -CMe2CMe2-) have been prepared by the drop wise addition of the appropriate O, O’-dialkyl ... A series of new complexes, CpTiCl[S2P(OR)2]2 (where R) Et, n-Pr, i-Pr, Bui, Ph) and CpTiCl [S2POGO]2 (where G) –CH2CMe2CH2-, -CMe2CMe2-) have been prepared by the drop wise addition of the appropriate O, O’-dialkyl or -alkylene dithiophosphoric acid to cyclopentadienyl titanium trichloride in 1:2 molar ratio and refluxed in benzene solution. The new compounds were characterized by molecular weight measurements elemental analyses and spectroscopic studies (1H, 13C, and 31P NMR, and in-frared). We suggest a distorted tetrahedron structure of these new complexes and the dithioligand behaves as bidentate ligand. 展开更多
关键词 CHLORO CYCLOPENTADIENYL titanium (iv) BIS DIALKYL Alkylene Dithiophos-phate
下载PDF
酒石酸钛(IV)配合物的合成和热性质研究
10
作者 陈吉书 吕真国 《云南化工》 CAS 1996年第2期32-34,共3页
通过四氯化钛与酒石酸反应,制得了新的固态配合物Ti2O2(OH)2C4H4O6·3H2O。用元素分析、X-射线粉末衍射,IR和TG分析确定了产物的组成。TG和DSC研究了它在空气氛围下的热分解特性,计算机求解热分... 通过四氯化钛与酒石酸反应,制得了新的固态配合物Ti2O2(OH)2C4H4O6·3H2O。用元素分析、X-射线粉末衍射,IR和TG分析确定了产物的组成。TG和DSC研究了它在空气氛围下的热分解特性,计算机求解热分解反应各阶段的活化能Ea,反应级数n、焓变面△rH和熵变面△rS。在550℃灼烧1小时,可得锐钛型TiO2。 展开更多
关键词 酒石酸钛 合成 热分解 配合物
下载PDF
Determination of Trace Titanium by Catalytic Kinetic Spectrophtometry
11
作者 翟庆洲 张昊 《Defence Technology(防务技术)》 SCIE EI CAS 2007年第2期134-138,共5页
The optimum conditions of discoloring reaction of DBM-arsenazo oxidized by potassium bromate and catalyzed by trace titanium(Ⅳ)are studied and a new catalytic-kinetic spectrophotometric method for determination of tr... The optimum conditions of discoloring reaction of DBM-arsenazo oxidized by potassium bromate and catalyzed by trace titanium(Ⅳ)are studied and a new catalytic-kinetic spectrophotometric method for determination of trace titanium is developed.The linear range of determination of titanium(Ⅳ)is 0-48 ng/mL at 530 nm.The detection limit of the method is 0.084 ng/mL.The method is used for the determination of titanium in water samples and the analytical results are in excellent agreement with those by atomic absorption spectrometry. 展开更多
关键词 分析化学 钛元素 分光光度测定法 催化动力
下载PDF
有机钛化合物催化碳酸二甲酯与乙酸苯酯合成碳酸二苯酯 被引量:14
12
作者 曹平 杨建 +3 位作者 杨先贵 姚洁 王越 王公应 《催化学报》 SCIE CAS CSCD 北大核心 2009年第1期65-68,共4页
对比测定了几种有机钛化合物对碳酸二甲酯(DMC)与乙酸苯酯(PA)酯交换合成碳酸二苯酯(DPC)反应的催化性能.结果表明,乙酰丙酮氧钛(TiO(acac)2)是一种有效的酯交换用催化剂,具有良好的催化性能.在优化的条件(n(PA)=0.8mol,n(DMC)/n(PA)=1/... 对比测定了几种有机钛化合物对碳酸二甲酯(DMC)与乙酸苯酯(PA)酯交换合成碳酸二苯酯(DPC)反应的催化性能.结果表明,乙酰丙酮氧钛(TiO(acac)2)是一种有效的酯交换用催化剂,具有良好的催化性能.在优化的条件(n(PA)=0.8mol,n(DMC)/n(PA)=1/2,n(TiO(acac)2)/n(PA)=0.006,θ=180℃,t=4h)下,DMC转化率可达74.9%,DPC和甲基苯基碳酸酯(MPC)的选择性分别可达38.9%和56.9%. 展开更多
关键词 乙酰丙酮氧钛 碳酸二甲酯 乙酸苯酯 酯交换 碳酸二苯酯
下载PDF
乙酰丙酮氧钛催化苯酚和碳酸二甲酯的酯交换反应 被引量:10
13
作者 李碧静 唐荣芝 +1 位作者 陈彤 王公应 《催化学报》 SCIE EI CAS CSCD 北大核心 2012年第4期601-604,共4页
首次将乙酰丙酮氧钛用于苯酚和碳酸二甲酯的酯交换反应合成碳酸二苯酯,显示出较好的催化活性和很高的酯交换选择性,催化剂经180℃热处理后,苯酚转化率可达45.8%,转化数(n(苯酚)/n(Ti))为96,高于有机钛类均相催化剂.结果表明,当乙酰丙酮... 首次将乙酰丙酮氧钛用于苯酚和碳酸二甲酯的酯交换反应合成碳酸二苯酯,显示出较好的催化活性和很高的酯交换选择性,催化剂经180℃热处理后,苯酚转化率可达45.8%,转化数(n(苯酚)/n(Ti))为96,高于有机钛类均相催化剂.结果表明,当乙酰丙酮氧钛用量为0.2g以上,开始有副产物苯甲醚生成,酯交换选择性随催化剂用量的增加而降低.该催化剂重复使用5次后,苯酚转化率仍可达40%以上,酯交换选择性为99.9%,表现出较高的重复使用性能. 展开更多
关键词 乙酰丙酮氧钛 碳酸二苯酯 酯交换 苯酚 多相催化剂
下载PDF
乙酰丙酮氧钛催化碳酸二苯酯与1,4-丁二醇酯交换合成聚碳酸酯二醇 被引量:8
14
作者 王丽苹 萧斌 王公应 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2011年第10期8-10,共3页
研究了乙酰丙酮氧钛(TiO(acac)2)在碳酸二苯酯(DPC)和1,4-丁二醇(1,4-BD)酯交换法合成聚碳酸酯二醇(PCDL)中的催化活性,并与钛酸丁酯和钛酸异丙酯催化剂进行了比较。在酯化过程中,以生成的苯酚的产率表征催化剂的活性,在缩聚过程中,以... 研究了乙酰丙酮氧钛(TiO(acac)2)在碳酸二苯酯(DPC)和1,4-丁二醇(1,4-BD)酯交换法合成聚碳酸酯二醇(PCDL)中的催化活性,并与钛酸丁酯和钛酸异丙酯催化剂进行了比较。在酯化过程中,以生成的苯酚的产率表征催化剂的活性,在缩聚过程中,以产品的数均分子量-Mn、羟基值和多分散性来表征。在优化的反应条件下,获得了分子量分布较窄的PCDL,其数均分子量为2600,羟基值为45.2 mg KOH/g。 展开更多
关键词 乙酰丙酮氧钛 碳酸二苯酯 1 4-丁二醇 酯交换反应
下载PDF
水相法合成双(环戊二烯基)钛氨基酸配合物的研究 被引量:5
15
作者 高玲香 高子伟 王冀英 《有机化学》 SCIE CAS CSCD 北大核心 1999年第5期533-536,共4页
以N-(取代苯基)氨基乙酸及盐与双(环戊二烯基)二氯化钛在水相及有机相反应,得到了五个双(环戊二烯基)钛氨基酸配合物,对配合物进行了熔点、元素分析、IR及^1HNMR的表征,确定了它们的结构。这些配合物在空气中稳定。... 以N-(取代苯基)氨基乙酸及盐与双(环戊二烯基)二氯化钛在水相及有机相反应,得到了五个双(环戊二烯基)钛氨基酸配合物,对配合物进行了熔点、元素分析、IR及^1HNMR的表征,确定了它们的结构。这些配合物在空气中稳定。经比较,水相中的合成反应速度快,操作简单,产物较易分离,产率高。 展开更多
关键词 环戊二烷基 氨基酸 配合物 水相法 合成
下载PDF
乙酰丙酮钛催化本体开环聚合制备聚己内酯 被引量:4
16
作者 程进 刘长春 +1 位作者 陈群 李树白 《中国胶粘剂》 CAS 北大核心 2017年第5期18-20,51,共4页
聚己内酯(PCL)是一种环境友好、生物相容性和生物可降解性良好的高分子材料,在生物医学、涂料和包装等领域中得到广泛应用。以价格低廉的乙酰丙酮和四氯化钛为原料,采用简单易制的方法制得乙酰丙酮钛;然后以此作为ε-己内酯(ε-CL)单体... 聚己内酯(PCL)是一种环境友好、生物相容性和生物可降解性良好的高分子材料,在生物医学、涂料和包装等领域中得到广泛应用。以价格低廉的乙酰丙酮和四氯化钛为原料,采用简单易制的方法制得乙酰丙酮钛;然后以此作为ε-己内酯(ε-CL)单体的催化剂,采用本体开环聚合法制备了高转化率和高Mη(黏均相对分子质量)的PCL。研究结果表明:当n(ε-CL)∶n(催化剂)=150∶1、聚合时间为210 min和聚合温度为110℃时,所得PCL的转化率(99.5%)和M_η(2.662×10~4)相对最大。 展开更多
关键词 环境友好 乙酰丙酮钛 Ε-己内酯 本体开环聚合 聚己内酯
下载PDF
乙酰丙酮锆催化乙丙交酯开环共聚的工艺研究 被引量:3
17
作者 姜诚 崔爱军 +2 位作者 姜海建 孙政 陈群 《化工进展》 EI CAS CSCD 北大核心 2015年第2期479-483,共5页
以乙酰丙酮锆[Zr(Acac)4]为催化剂引发不同配比的乙交酯和L-丙交酯开环共聚反应,合成出了系列分子量的聚乙丙交酯(PLGA)。采用核磁共振(1H NMR)、差示扫描量热(DSC)、热重分析(TGA)和X射线衍射(XRD)等方法表征了PLGA的结构和性质。结果... 以乙酰丙酮锆[Zr(Acac)4]为催化剂引发不同配比的乙交酯和L-丙交酯开环共聚反应,合成出了系列分子量的聚乙丙交酯(PLGA)。采用核磁共振(1H NMR)、差示扫描量热(DSC)、热重分析(TGA)和X射线衍射(XRD)等方法表征了PLGA的结构和性质。结果表明,以乙酰丙酮锆催化制备的PLGA结晶度高于由传统催化剂辛酸亚锡制备的PLGA。研究了催化剂用量、聚合温度、聚合时间对聚乙丙交酯(PLGA)特性黏度的影响,得出了较优的反应工艺条件为:乙酰丙酮锆用量为0.06%,聚合温度为150℃,聚合时间为6h,合成了特性黏度达0.957d L/g、重均相对分子质量为1.24×105的高分子量的PLGA。 展开更多
关键词 乙酰丙酮锆 乙交酯 L-丙交酯 聚乙丙交酯 开环共聚
下载PDF
溶胶-凝胶法合成聚甲基丙烯酸甲酯/二氧化钛-二氧化硅杂化聚合物材料 被引量:29
18
作者 黄智华 丘坤元 《高分子学报》 SCIE CAS CSCD 北大核心 1997年第4期434-438,共5页
通过溶胶凝胶过程合成了有机聚合物链段与无机相间有共价键存在的P(MMAMSMA)/TiO2SiO2杂化聚合物材料.溶剂抽提结果表明杂化材料体系中凝胶的含量很高.通过FTIR测试对材料进行了结构分析,并且由TGA... 通过溶胶凝胶过程合成了有机聚合物链段与无机相间有共价键存在的P(MMAMSMA)/TiO2SiO2杂化聚合物材料.溶剂抽提结果表明杂化材料体系中凝胶的含量很高.通过FTIR测试对材料进行了结构分析,并且由TGA、DSC测试分别分析了杂化材料体系中无机组份总量以及Ti(OC4H9)4的含量对材料性能的影响. 展开更多
关键词 MSMA 杂化聚合物 PMMA 钛酸正乙酯 硅酸正乙酯
下载PDF
氧化锆对TC4钛合金固体渗硼的影响 被引量:4
19
作者 刘云辉 许晓静 +1 位作者 王宏宇 陈树东 《热加工工艺》 CSCD 北大核心 2013年第18期109-111,共3页
研究了固体渗硼剂(碳化硼+碳化硅)中添加氧化锆对钛合金渗硼层的表面形貌与相组成、渗层厚度、渗层硬度、渗层与基体的界面结合力以及渗层摩擦磨损性能的影响。结果表明,固体渗硼剂中添加氧化锆(4.0wt%)改变了渗层的相组成(添加氧化锆... 研究了固体渗硼剂(碳化硼+碳化硅)中添加氧化锆对钛合金渗硼层的表面形貌与相组成、渗层厚度、渗层硬度、渗层与基体的界面结合力以及渗层摩擦磨损性能的影响。结果表明,固体渗硼剂中添加氧化锆(4.0wt%)改变了渗层的相组成(添加氧化锆渗层与未添加氧化锆渗层的相分别由TiB12、TiB2、TiB、TiC、TiN和TiB2、TiB12、TiN组成);提高了渗层的厚度与表面硬度(增幅分别为35.0%和6.99%);大幅提高了渗层与基体的界面结合力(增幅为41.17%)和渗层在摩擦磨损过程中抗剥落性以及自身抗裂性能。 展开更多
关键词 氧化锆 固体渗硼 TC4钛合金 显微硬度 摩擦磨损性能
下载PDF
乙酰丙酮氧钛催化碳酸二苯酯与1,4-丁二醇酯交换反应 被引量:2
20
作者 王丽苹 萧斌 王公应 《合成化学》 CAS CSCD 北大核心 2010年第B09期183-184,共2页
研究了几种有机钛化合物对碳酸二苯酯(DPC)和1,4-丁二醇(1,4-BD)酯交换法合成聚碳酸酯二醇(PCDL)催化性能。研究表明,乙酰丙酮氧钛(TiO(acac)2)催化剂具有良好的催化活性。在优化的反应条件下,获得了数均分子量为2600和羟基值为45.2 mg ... 研究了几种有机钛化合物对碳酸二苯酯(DPC)和1,4-丁二醇(1,4-BD)酯交换法合成聚碳酸酯二醇(PCDL)催化性能。研究表明,乙酰丙酮氧钛(TiO(acac)2)催化剂具有良好的催化活性。在优化的反应条件下,获得了数均分子量为2600和羟基值为45.2 mg KOH/g的PCDL。 展开更多
关键词 乙酰丙酮氧钛 碳酸二苯酯 1 4-丁二醇 酯交换反应
下载PDF
上一页 1 2 3 下一页 到第
使用帮助 返回顶部