Titanium dioxide films were firstly deposited on glass substrate by DBD-CVD （dielectric barrier discharge enhanced chemical vapor deposition） technique. The structure of the films was investigated by X-ray diffracti...Titanium dioxide films were firstly deposited on glass substrate by DBD-CVD （dielectric barrier discharge enhanced chemical vapor deposition） technique. The structure of the films was investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）. TiO2 films deposited under atmosphere pressure show preferred orientation, and exhibit columnar-like structure, while TiO2 films deposited under low gas pressure show no preferred orientation. The columnar-like structure with preferred orientation exhibits higher photocatalytic efficiency, since the columnar structure has larger surface area. However, it contributes little to the improvement of hydrophilicity. DBD-CVD is an alternative method to prepare photocatalytic TiO2 for its well-controllable property.展开更多
Titanium dioxide (TiO2) thin film was deposited on the surface of the light addressable potentiometric sensor (LAPS) to modify the sensor surface for the non-labeled detection of DNA molecules. To evaluate the effect ...Titanium dioxide (TiO2) thin film was deposited on the surface of the light addressable potentiometric sensor (LAPS) to modify the sensor surface for the non-labeled detection of DNA molecules. To evaluate the effect of ultraviolet (UV) treatment on the silanization level of TiO2 thin film by 3-aminopropyltriethoxysilane (APTS),fluorescein isothiocyanate (FITC) was used to label the amine group on the end of APTS immobilized onto the TiO2 thin film. We found that,with UV irradiation,the silanization level of the irradiated area of the TiO2 film was improved compared with the non-irradiated area under well-controlled conditions. This result indicates that TiO2 can act as a coating material on the biosensor surface to improve the effect and efficiency of the covalent immobilization of biomolecules on the sensor surface. The artificially synthesized probe DNA molecules were covalently linked onto the surface of TiO2 film. The hybridization of probe DNA and target DNA was monitored by the recording of I-V curves that shift along the voltage axis during the process of reaction. A significant LAPS signal can be detected at 10 μmol/L of target DNA sample.展开更多
文摘Titanium dioxide films were firstly deposited on glass substrate by DBD-CVD （dielectric barrier discharge enhanced chemical vapor deposition） technique. The structure of the films was investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）. TiO2 films deposited under atmosphere pressure show preferred orientation, and exhibit columnar-like structure, while TiO2 films deposited under low gas pressure show no preferred orientation. The columnar-like structure with preferred orientation exhibits higher photocatalytic efficiency, since the columnar structure has larger surface area. However, it contributes little to the improvement of hydrophilicity. DBD-CVD is an alternative method to prepare photocatalytic TiO2 for its well-controllable property.
基金Project supported by the National Natural Science Foundation of China (Nos. 30627002 and 60725102)the Interdisciplinary Research Foundation of Zhejiang University (No. 2009-15), China
文摘Titanium dioxide (TiO2) thin film was deposited on the surface of the light addressable potentiometric sensor (LAPS) to modify the sensor surface for the non-labeled detection of DNA molecules. To evaluate the effect of ultraviolet (UV) treatment on the silanization level of TiO2 thin film by 3-aminopropyltriethoxysilane (APTS),fluorescein isothiocyanate (FITC) was used to label the amine group on the end of APTS immobilized onto the TiO2 thin film. We found that,with UV irradiation,the silanization level of the irradiated area of the TiO2 film was improved compared with the non-irradiated area under well-controlled conditions. This result indicates that TiO2 can act as a coating material on the biosensor surface to improve the effect and efficiency of the covalent immobilization of biomolecules on the sensor surface. The artificially synthesized probe DNA molecules were covalently linked onto the surface of TiO2 film. The hybridization of probe DNA and target DNA was monitored by the recording of I-V curves that shift along the voltage axis during the process of reaction. A significant LAPS signal can be detected at 10 μmol/L of target DNA sample.
