Ti-bearing slag(TiO2>20 wt%)is a valuable titanium secondary resource.The extraction of titanium from the slag is difficult due to the complex composition and structure.Although molten oxide electrolysis is conside...Ti-bearing slag(TiO2>20 wt%)is a valuable titanium secondary resource.The extraction of titanium from the slag is difficult due to the complex composition and structure.Although molten oxide electrolysis is considered as a promising method,silicon will be preferentially electroreduced compared to titanium due to low theoretical decomposition voltage.In this work,a liquid copper cathode is used to selectively extract titanium from molten Al2O3-MgO-CaO-TiO2-SiO2 electrolyte.It is found that comparing to silicon,titanium can be preferentially reduced by one-step electron transfer due to the enhanced depolarization effect on a liquid copper cathode.So,Ti-Cu alloys are firstly obtained from molten Ti-bearing slag,and then Ti-Si alloys are co-electrodeposited in the molten oxide electrolyte with low TiO2 content.It may be ascribed to the larger binding force between titanium and copper than that between silicon and copper.It provides an effective strategy for the separation of titanium from of Ti-bearing slag.展开更多
Chitosan （CTS） coatings contained calcium （Ca） and phosphorus （P） on titanium （Ti） surface are prepared by the cathode liquid phase plasma technology （CLPT）, in a certain concentration electrolyte solution w...Chitosan （CTS） coatings contained calcium （Ca） and phosphorus （P） on titanium （Ti） surface are prepared by the cathode liquid phase plasma technology （CLPT）, in a certain concentration electrolyte solution with selective additions of ammonium dihydrogen phosphate and calcium nitrate. It is indicated that the parameters for a stable discharge are voltage of 400 V, frequency of 100 Hz, duty cycle of 30% based on a large amount of experiment data. The morphology, structure and composition of the coated samples are studied by SEM, FTIR, XRD, XPS. The results demonstrate that the composite coatings are uniform, and some solid particles of inorganic salt containing calcium and phosphorus dispersed on the coatings. CA tests show that the samples treated by the liquid plasma became less hydrophilic. The variation of hydrophilicity on the CLPT treated titanium is attributed to the change of the function groups on the sample surface. Meanwhile, a possible formation mechanism of the composite coatings is discussed.展开更多
The energy barrier at the CH3NH3Pb Br3/TiO2interface hinders the electron transfer from CH3NH3Pb Br3to compact TiO2（cp-TiO2）.Ionic liquid（IL）,that forms dipoles pointing away from TiO2,can adjust the work function...The energy barrier at the CH3NH3Pb Br3/TiO2interface hinders the electron transfer from CH3NH3Pb Br3to compact TiO2（cp-TiO2）.Ionic liquid（IL）,that forms dipoles pointing away from TiO2,can adjust the work function of TiO2resulting in suitable energy level for charge transfer from CH3NH3Pb Br3to TiO2.The time-resolved photoluminescence spectroscopy（TRPL）measurements confirm faster electron transfer from the CH3NH3Pb Br3film to TiO2after modification by IL.Solar cells based on IL modified cp-TiO2demonstrate efficiency of～6%,much higher than the devices（0.2%）fabricated using untreated cp-TiO2as the electron transport layer.展开更多
The lack of experimental data and / or limited experimental information concerning both surface and transport properties of liquid alloys often require the prediction of these quantities. An attempt has been made to l...The lack of experimental data and / or limited experimental information concerning both surface and transport properties of liquid alloys often require the prediction of these quantities. An attempt has been made to link the thermophysical properties of a ternary Cu-Sn-Ti system and its binary Cu-Sn, Cu-Ti and SnoTi subsystems with the bulk through the study of the concentration dependence of various thermodynamic, structural, surface and dynamic properties in the frame of the statistical mechanical theory in conjunction with the quasi-lattice theory （QLT）. This formalism provides valuable qualitative insight into mixing processes that occur in molten alloys.展开更多
It was tried to prepare composite particles made of polymer and two kinds of solid powders by forming Pickeringemulsion followed by the drying-in-liquid method and to investigate how the stepwise addition of solid pow...It was tried to prepare composite particles made of polymer and two kinds of solid powders by forming Pickeringemulsion followed by the drying-in-liquid method and to investigate how the stepwise addition of solid powders affected the contained ratio and adhesion ratio of solid powders and the structure of composite particles. Limonene oil dissolving expanded polystyrene and ethylene glycol were adopted as the dispersed phase and the continuous phase, respectively. Magnetite and titanium dioxide were used as solid powders. Magnetite was added before or after formation of the (O/W) dispersion. Titanium dioxide was added at the various elapsed times from addition of magnetite. Titanium dioxide adhered only on the surface of composite particles irrespective of addition time. At the earlier addition of both solid powders, the surface-covering type composite particles were prepared. At the latter addition of titanium dioxide, a part of magnetite adhered on the surface and the remainder was dispersed into composite particle.展开更多
基金supported by the National Natural Science Foundation of China(51725401)the Fundamental Research Funds for the Central Universities(FRF-TP-18-010B1).
文摘Ti-bearing slag(TiO2>20 wt%)is a valuable titanium secondary resource.The extraction of titanium from the slag is difficult due to the complex composition and structure.Although molten oxide electrolysis is considered as a promising method,silicon will be preferentially electroreduced compared to titanium due to low theoretical decomposition voltage.In this work,a liquid copper cathode is used to selectively extract titanium from molten Al2O3-MgO-CaO-TiO2-SiO2 electrolyte.It is found that comparing to silicon,titanium can be preferentially reduced by one-step electron transfer due to the enhanced depolarization effect on a liquid copper cathode.So,Ti-Cu alloys are firstly obtained from molten Ti-bearing slag,and then Ti-Si alloys are co-electrodeposited in the molten oxide electrolyte with low TiO2 content.It may be ascribed to the larger binding force between titanium and copper than that between silicon and copper.It provides an effective strategy for the separation of titanium from of Ti-bearing slag.
基金supported by National Natural Science Foundation of China (No.10675078)
文摘Chitosan （CTS） coatings contained calcium （Ca） and phosphorus （P） on titanium （Ti） surface are prepared by the cathode liquid phase plasma technology （CLPT）, in a certain concentration electrolyte solution with selective additions of ammonium dihydrogen phosphate and calcium nitrate. It is indicated that the parameters for a stable discharge are voltage of 400 V, frequency of 100 Hz, duty cycle of 30% based on a large amount of experiment data. The morphology, structure and composition of the coated samples are studied by SEM, FTIR, XRD, XPS. The results demonstrate that the composite coatings are uniform, and some solid particles of inorganic salt containing calcium and phosphorus dispersed on the coatings. CA tests show that the samples treated by the liquid plasma became less hydrophilic. The variation of hydrophilicity on the CLPT treated titanium is attributed to the change of the function groups on the sample surface. Meanwhile, a possible formation mechanism of the composite coatings is discussed.
基金the financial support from the Institute for Critical Technology and Applied Science(ICTAS)the financial support from Office of Naval Research(I.Perez)through grant number N000141613043the supports of National Natural Science Foundation of China under grant no.61604152
文摘The energy barrier at the CH3NH3Pb Br3/TiO2interface hinders the electron transfer from CH3NH3Pb Br3to compact TiO2（cp-TiO2）.Ionic liquid（IL）,that forms dipoles pointing away from TiO2,can adjust the work function of TiO2resulting in suitable energy level for charge transfer from CH3NH3Pb Br3to TiO2.The time-resolved photoluminescence spectroscopy（TRPL）measurements confirm faster electron transfer from the CH3NH3Pb Br3film to TiO2after modification by IL.Solar cells based on IL modified cp-TiO2demonstrate efficiency of～6%,much higher than the devices（0.2%）fabricated using untreated cp-TiO2as the electron transport layer.
基金This work was financially supported by THERMOLAB - ESA MAP PROJECT, Contract No. AO-99-022. A part of this work was performed in the framework of the E.C. action COST 531 project: "Lead-free solder materials".
文摘The lack of experimental data and / or limited experimental information concerning both surface and transport properties of liquid alloys often require the prediction of these quantities. An attempt has been made to link the thermophysical properties of a ternary Cu-Sn-Ti system and its binary Cu-Sn, Cu-Ti and SnoTi subsystems with the bulk through the study of the concentration dependence of various thermodynamic, structural, surface and dynamic properties in the frame of the statistical mechanical theory in conjunction with the quasi-lattice theory （QLT）. This formalism provides valuable qualitative insight into mixing processes that occur in molten alloys.
文摘It was tried to prepare composite particles made of polymer and two kinds of solid powders by forming Pickeringemulsion followed by the drying-in-liquid method and to investigate how the stepwise addition of solid powders affected the contained ratio and adhesion ratio of solid powders and the structure of composite particles. Limonene oil dissolving expanded polystyrene and ethylene glycol were adopted as the dispersed phase and the continuous phase, respectively. Magnetite and titanium dioxide were used as solid powders. Magnetite was added before or after formation of the (O/W) dispersion. Titanium dioxide was added at the various elapsed times from addition of magnetite. Titanium dioxide adhered only on the surface of composite particles irrespective of addition time. At the earlier addition of both solid powders, the surface-covering type composite particles were prepared. At the latter addition of titanium dioxide, a part of magnetite adhered on the surface and the remainder was dispersed into composite particle.
