Spatial distributions of intra-community tree species under topographically variable conditions

Growing public awareness of the importance of protecting biodiversity requires the development of forest practices that increase the complexity of stand structure.Understanding the ecological processes of different forest vegetation provide insights into community coexistence mechanisms.In this paper,the spatial patterns of three different communities,evergreen broadleaf forest,deciduous broadleaf forest,and mixed needleleaf and broadleaf forest at Mt.Huangshan,China,were quantified with four structural parameters,the mingling index,the uniform angle index,the diameter dominance index and the crowdedness index.All trees with a diameter at breast height of more than 5 cm were measured.Our analyses highlighted that most trees in the three communities were extremely dense and slightly clumped,with a moderate size differentiation and high mixed structure.In mixed needleleaf and broadleaf forest,the distribution pattern of tree species was better than the other two forests.Overall,spatial patterns in mixed needleleaf and broadleaf forest exhibited a strong stability-effect,that is,the stand had a suitable environment for the stable survival of the forest.With the increasing of elevation,the degree of the mingling index and the crowdedness index increased,however,there was no influence on the uniform angle index and the diameter dominance index.Further,at the same elevation,four structural parameters of shady slope were larger than that of sunny slope.Then we found the relationship between stand spatial structure and environment factors had important influence on forest structure.Our work contributes to the knowledge of population structure,and further provide theoretical basis for the sustainable development of forest resources and protecting biodiversity of Huangshan Mountain.In future studies,it is necessary to explore the limiting factors of community spatial distribution by combining species diversity and functional traits.

Analyzing geomorphological and topographical controls for the heterogeneous glacier mass balance in the Sikkim Himalayas

Glacier response patterns at the catchment scale are highly heterogeneous and defined by a complex interplay of various dynamics and surface factors.Previous studies have explained heterogeneous responses in qualitative ways but quantitative assessment is lacking yet where an intrazone homogeneous climate assumption can be valid.Hence,in the current study,the reason for heterogeneous mass balance has been explained in quantitative methods using a multiple linear regression model in the Sikkim Himalayan region.At first,the topographical parameters are selected from previously published studies,then the most significant topographical and geomorphological parameters are selected with backward stepwise subset selection methods.Finally,the contributions of selected parameters are calculated by least square methods.The results show that,the magnitude of mass balance lies between-0.003±0.24 to-1.029±0.24 m.w.e.a^(-1) between 2000 and 2020 in the Sikkim Himalaya region.Also,the study shows that,out of the terminus type of the glacier,glacier area,debris cover,ice-mixed debris,slope,aspect,mean elevation,and snout elevation of the glaciers,only the terminus type and mean elevation of the glacier are significantly altering the glacier mass balance in the Sikkim Himalayan region.Mathematically,the mass loss is approximately 0.40 m.w.e.a^(-1) higher in the lake-terminating glaciers compared to the land-terminating glaciers in the same elevation zone.On the other hand,a thousand meters mean elevation drop is associated with 0.179 m.w.e.a-1of mass loss despite the terminus type of the glaciers.In the current study,the model using the terminus type of the glaciers and the mean elevation of the glaciers explains 76% of fluctuation of mass balance in the Sikkim Himalayan region.

A Mesoscale Analysis of Heavy Rain Caused by Frontal and Topographical Heterogeneities on Taiwan Island

The prevailing mesoscale model MM5 (V3) is used to simulate a heavy rain case caused by interac- tion between a move-in front and topographical heterogeneities on Taiwan Island. It is found that both thermodynamic and dynamic ?elds along the front are heterogeneous in time and space. The heterogene- ity becomes more signi?cant as the e?ect of topography is added on. The heterogeneous distribution of physical variables along the front is the main reason for the heterogeneous frontal rain band; the optimum cooperation of the low level and upper level jet is another reason for the development of the rain band. Topography can strengthen the rainfall and causes extremely heavy rain cells. Updraft induced by topog- raphy extends to a rather low level, while the uplifted air by frontal circulation can reach to higher levels. The quasi-steady topographic circulation overlaps the frontal circulation when the front moves over Taiwan Island; the advantageous cooperation of various mesoscale conditions causes the large upward velocity on the windward side of the island.

Summery Intra-Tidal Variations of Suspended Sediment Transportation–Topographical Response and Dynamical Mechanism in the Aoshan Bay and Surrounding Area,Shandong Peninsula

As the second largest bay in Qingdao,the Aoshan Bay and its adjacent sea area play an important role in aquaculture development and urban land and sea coordination for the eastern gulf type of city in the Qingdao Blue Silicon Valley Core Area(QBSVCA).Based on in-situ sedimentary dynamical observation and previous research results,the thermohaline structure,the transportation of suspended sediment and its mechanism,and the coastal geomorphic response were elaborated and analyzed in detail in this paper.The result indicated that the thermohaline and density distribution have obvious intra-tidal characteristics in the QBSVCA and the adjacent waters of the islands,during summer neap tide stage.The development of the bottom high suspended sediment concentration(SSC)layer was slightly enhanced in flood slack at each of the four stations.Suspended sediment transportation near the QBSVCA is related closely with the vertical mixing-stratification mechanism.Combined with previous research results,this study once again showed that submarine topography and the grain size of sea bed sediments would respond to hydrodynamic forces.The medians of the bottom E and D50 in the Aoshan Bay were the highest,followed by those in the Daguan Island and Xiaoguan Island,and the data in the Laoshan Bay were the lowest.This showed that the capacity of suspended sediment transportation in the bottom water layer of the Aoshan Bay was stronger than that of the adjacent sea area.The re-suspension and migration of fine sediments lead to the strong coarsening of sediments in this area.

Dust as a Potential Tracer for the Flow over Different Topographical Shapes Employing MODIS-Terra Observations

The hypothesis, that the magnitude of the Froude number can represent the flow type around an obstacle was examined at several different topographical shapes in dust-laden environments. It was found that in most cases this hypothesis was true. Average of 16 May months AOT data extracted from the MODIS Terra satellite has shown that in case of Froude number less than one, the AOT isolines tend to follow the topographical contours of the mountain peak (the obstacle) along with a minimum AOT near the peak.

Quantitative Estimation of Altimetric Variations Using Residual DEM from Topographical Maps between Two Epochs 1893 and 1985: Case Study: The Endorheic Basin of Enfidha-Tunisia

This article endeavours to analyse the recent deformation in the Enfidha region. This analysis has been carried out using the Residual Digital Elevation Model (DEM). It is the altimetric difference between two DEM generated from the contour lines of two topographical maps over a period of 100 years. This deformation has been studied by some authors who report the presence of recent ground movements by comparing contour lines with a downward trend in elevation from 1893 to 1985. In 2006, this study area was marked by the presence of two earthquakes that occurred in several coastal cities located in the northeastern part of Tunisia. Our study involves a quantitative estimation of altimetric variations under a Geographic Information System (GIS) environment. Our proposed methodology aims at the mapping of residual (DEM) and the extraction of parameters that have a morphological and morphostructural signature. The extraction of quantitative morphostructural parameters requires the integration of multi-source and multi-scale data. This can only be done if the problem of heterogeneity at the level of scale and coordinate system is solved through the use of GIS tools and the obtainment of the vectorial shapefile format. Then, in order to compare the DEM generation errors with reference to recent and old data, they must be projected in the same projection system and on the same scale. The available data are two topographic maps of Enfidha which represent two different epochs. The first one is an old topographic map of 1893 (type 1922) at a scale of 1:50,000 and the second one is a recent topographic map of 1985 at a scale of 1:25,000. These topographical maps have the Lambert (IGN) projection system. This methodological approach, based on residual (DEM), allows to highlight an estimated subsidence of 3 m/100years located in the Enfidha plain and extends to the south coast of Cap Bon area in Tunisia. The variation of the contour lines shape between the old and the recent map can be studied in correlation with a relay structure fault observed and recognized by some analysts in this area. These relay accidents remain active according to the results obtained by the residual (DEM) and validated by the field observations of two sites that we have carried out in the Enfidha endorheic basin.

Topographically Forced Rossby Wave Instability and the Development of Blocking in the Atmosphere

In this paper, the linear stability of disturbance superimposed on basic state Rossby wave forced by topography is investigated, and pointed out that when a certain criterion is satisfied by the basic flow and the height of topography for the subresonance, the small disturbance may be unstable. Furthermore, we also compare the evolution of the instability disturbance with the development of blocking in the Pacific, and we suggested that the topographically forced Rossby wave instability may provide a possible mechanism for the development of blocking in the Pacific.

Exploration of Geotechnical Engineering Investigation under Complex Topographical and Geological Conditions

This paper will explore the geotechnical engineering investigation technology under the complex topographical and geological conditions,and introduce how to construct the water supply tube wells faster and better under the complex topographical and geological conditions by taking Inner Mongolia as an example,so as to provide reference for the relevant professionals.

Renewing urban large-scale topographical maps by using of Quick Bird panchromatic remote sensing images

Urban large-scale topographical maps can be renewed by means of overlapping the original digital line graph (DLG) and up-to-date remote sensitive images which have high precision and have been orthographically rectified precisely. Quick Bird panchromatic remote sensing image is used and an urban area with even terrain and dense buildings is selected as experimental area. Ground control points (GCPs) are selected on a new 1∶500 topographical map and multinomial model is applied for rectification. After rectification the absolute positional error of a single point of the image is less than 1m, therefore this method is suitable for renewing topographical maps of up to (1∶2 000) scale.

Topographically derived subpixel-based change detection for monitoring changes over rugged terrain Himalayas using AWiFS data

Continuous and accurate monitoring of earth surface changes over rugged terrain Himalayas is important to manage natural resources and mitigate natural hazards.Conventional techniques generally focus on per-pixel based processing and overlook the sub-pixel variations occurring especially in case of low or moderate resolution remotely sensed data.However,the existing subpixel-based change detection(SCD)models are less effective to detect the mixed pixel information at its complexity level especially over rugged terrain regions.To overcome such issues,a topographically controlled SCD model has been proposed which is an improved version of widely used per-pixel based change vector analysis(CVA)and hence,named as a subpixel-based change vector analysis(SCVA).This study has been conducted over a part of the Western Himalayas using the advanced wide-field sensor(AWiFS)and Landsat-8 datasets.To check the effectiveness of the proposed SCVA,the cross-validation of the results has been done with the existing neural network-based SCD(NN-SCD)and per-pixel based models such as fuzzybasedCVA(FCVA)andpost-classification comparison(PCC).The results have shown that SCVA offered robust performance(85.6%-86.4%)as comparedtoNN-SCD(81.6%-82.4%),PCC(79.2%-80.4%),and FCVA(81.2%-83.6%).We concluded that SCVA helps in reducing the detection of spurious pixels and improve the efficacy of generating change maps.This study is beneficial for the accurate monitoring of glacier retreat and snow cover variability over rugged terrain regions using moderate resolution remotely sensed datasets.

An Analysis of A Rose for Emily from the Perspective of Spatial Narrative

The novel A Rose for Emily is one of the early works of William Faulkner,a famous American southern writer who has won The Nobel Prize in Literature in 1950.Spatial narrative theory analyzes and summarizes the spatial characteristics of modern and postmodern novels,showing the narrative characteristics of the works that the time is disrupted and suspended,and the space is extended indefinitely.This paper intends to interpret A Rose for Emily from the perspective of spatial narrative theory,and analyze the geological space,social space and text space in the novel,so as to reveal the important role of spatial structure in creating atmosphere and promoting narrative process,in order to better grasp the spatial metaphors in Faulkner’s novels.

Topographical relief characteristics and its impact on population and economy:A case study of the mountainous area in western Henan,China

Topographical relief is a key factor that limits population distribution and economic development in mountainous areas.The limitation is especially apparent in the mountain?plain t「ansition zone.Taking the transition zone between the Qinling Mountains and the North China Plain(i.e.the mountainous area in western Henan Province)as an example and based on the 200-m resolution DEM data,we used the mean change-point analysis to determine the optimal statistical unit for topographical relief,and thereafter extracted the relief degree.Taking the 1:100,000 land use data,township population and county-level industrial data,population and economic spatial models were constructed,and 200?m resolution grid population and economic density maps were gen erated.Afterwards,statistical analysis was carried out to quantitatively reveal the impact of topographical relief on population and economy.In addition,the impacts of other topographical factors were discussed.The results showed the following.(1)The relief degree in western Henan is generally low,where 58.6%of the regional topography does not exceed half the height of a reference mountain(relative elevation W250 m).Spatially,the relief degree is high in the west while low in the east,and high in the middle while low in the north and south.There is a positive correlation between relief degree and elevation,and a much stronger correlation between relief degree and slope.(2)The linear fitting degree between the population and economic validation data and the corresponding simulation data are 0.943 and 0.909,respectively,indicating that the spatialized results can reflect the actual population and economic distribution.(3)The impact of topographical relief on population and economy was stronger than that of other topographical factors.The relief degree showed a good logarithmic fit relati on ship with population density(0.911)and economic density(0.874).Specifically,88.65%of the population lives in areas where the topographical relief is W0.5 and 88.03%of the gross regional product was from areas where the relief is W0.3.Compared with the population distribution,the economic development showed an obvious agglomeration trend towards low relief areas.

Rubber plantation and its relationship with topographical factors in the border region of China, Laos and Myanmar

Rubber plantation is the major land use type in Southeast Asia. Monitoring the spa- tial-temporal pattern of rubber plantation is significant for regional land resource development, eco-environmental protection, and maintaining border security. With remote sensing tech- nologies, we analyzed the rubber distribution pattern and spatial-temporal dynamic; with GIS and a newly proposed index of Planted Intensity （PI）, we further quantified the impacts and limits of topographical factors on rubber plantation in the border region of China, Laos and Myanmar （BRCLM） between 1980 and 2010. The results showed that： （1） As the dominant land use type in this border region, the acreage of rubber plantation was 6014 km2 in 2010, accounting for 8.17% of the total area. Viewing from the rubber plantation structure, the ratio of mature- （〉10 year） and young rubber plantation （〈 10 year） was 5：7. （2） From 1980 to 2010, rubber plantation expanded significantly in BRCLM, from 705 km2 to 6014 km2, nearly nine times. The distribution characteristics of rubber plantation varied from concentrated toward dispersed, from border inside to outside, and expanded further in all directions with Jinghong City as the center. （3） Restricted by the topographical factors, more than 4/5 proportion of rubber plantation concentrated in the appropriate elevation gradients between 600 and 1000 m, rarely occurred in elevations beyond 1200 m in BRCLM. Nearly 2/3 of rubber plantation concentrated on slopes of 8^-25~, rarely distributed on slopes above 35~. Rubber plantation was primarily distributed in south and east aspects, relatively few in north and west aspects. Rubber planted intensity displayed the similar distribution trend. （4） Comparative studies of rubber plantation in different countries showed that there was a remarkable increase in area at higher elevations and steeper slopes in China, while there were large appropriate topog- raphical gradients for rubber plantation in Laos and Myanmar which benefited China for rubber trans-boundary expansion. （5） Rubber plantation in BRCLM will definitely expend cross borders of China to the territories of Laos and Myanmar, and the continuous expansion in the border region of China will be inevitable.

Detection and analysis of landslide geomorphology based on UAV vertical photogrammetry

High-resolution landslide images are required for detailed geomorphological analysis in complex topographic environment with steep and vertical landslide distribution.This study proposed a vertical route planning method for unmanned aerial vehicles(UAVs),which could achieve rapid image collection based on strictly calculated route parameters.The effectiveness of this method was verified using a DJI Mavic 2 Pro,obtaining high-resolution landslide images within the Dongchuan debris flow gully,in the Xiaojiang River Basin,Dongchuan District,Yunnan,China.A three-dimensional(3D)model was constructed by the structure-from-motion and multi-view stereo(SfM-MVS).Micro-geomorphic features were analyzed through visual interpretation,geographic information system(GIS),spatial analysis,and mathematical statistics methods.The results demonstrated that the proposed method could obtain comprehensive vertical information on landslides while improving measurement accuracy.The 3D model was constructed using the vertically oriented flight route to achieve centimeter-level accuracy(horizontal accuracy better than 6 cm,elevation accuracy better than 3 cm,and relative accuracy better than 3.5 cm).The UAV technology could further help understand the micro internal spatial and structural characteristics of landslides,facilitating intuitive acquisition of surface details.The slope of landslide clusters ranged from 36°to 72°,with the majority of the slope facing east and southeast.Upper elevation levels were relatively consistent while middle to lower elevation levels gradually decreased from left to right with significant variations in lower elevation levels.During the rainy season,surface runoff was abundant,and steep topography exacerbated changes in surface features.This route method is suitable for unmanned aerial vehicle(UAV)landslide surveys in complex mountainous environments.The geomorphological analysis methods used will provide references for identifying and describing topographic features.

Global patterns and ecological drivers of taxonomic and phylogenetic endemism in angiosperm genera

Endemism of lineages lies at the core of understanding variation in community composition among geographic regions because it reflects how speciation,extinction,and dispersal have influenced current distributions.Here,we investigated geographic patterns and ecological drivers of taxonomic and phylogenetic endemism of angiosperm genera across the world.We identify centers of paleo-endemism and neo-endemism of angiosperm genera,and show that they are mostly located in the Southern Hemisphere in tropical and subtropical regions,particularly in Asia and Australia.Different categories of phylogenetic endemism centers can be differentiated using current climate conditions.Current climate,historical climate change,and geographic variables together explained~80%of global variation in taxonomic and phylogenetic endemism,while 42-46%,1%,and 15%were independently explained by these three types of variables,respectively.Thus our findings show that past climate change,current climate,and geography act together in shaping endemism,which are consistent with the findings of previous studies that higher temperature and topographic heterogeneity promote endemism.Our study showed that many centers of phylogenetic endemism of angiosperms,including regions in Amazonia,Venezuela,and west-central tropical Africa that have not previously been identified as biodiversity hotspots,are missed by taxon-based measures of endemism,indicating the importance of including evolutionary history in biodiversity assessment.

Topographic seismic effects and avalanche hazard:A case study of Mount Siella(L’Aquila,Central Italy)

In mountainous areas,snow avalanches could be triggered by the shaking produced by earthquakes.The forces induced by the earthquake can cause an irregular increase of shear strength load down the slope,for the presence of complex surface and buried morphologies.Topographic irregularities generate maximum effects of waves amplification linked to wavelengths comparable to the horizontal dimension of the topographic feature.For this reason,the selected time-histories represent an appropriate input for the two-dimensional numerical response analyses when a dynamic phenomenon produce the resonant motion of a whole mountain.This represents an important earthquake-induced hazard in snow-covered mountain areas with high probability of seismic events.Some valleys are located in regions with scare ground motion data and investments on infrastructures are not always accompanied by adequate protection against earthquake-induced avalanches.The paper points out a simple deterministic approach for selecting a set of real accelerograms applied to a real case of Siella Mountain(Central Italy)where a large avalanche destroying a tourist facility of Rigopiano resort on 18 January 2017.The selected time histories were used as input for the two-dimensional numerical model of the subsoil to evaluate the topographic seismic amplification in ridge and compare it with the results of other authors.These methods suggest that morphology-related inertial effects should be considered as an overload action on snow layers when controlling multi-hazard studies and spatial planning.

Analysis of Heavy Precipitation Process in Eastern China from July 26 to 29, 2022

Based on the data of the National Climate Center of China and the NCEP of the United States, a heavy precipitation process in eastern China during July 26-29, 2022 was analyzed. The results show that: The precipitation process was formed under the influence of the low level southwest jet stream at the edge of the subtropical high. The eastward development of the low vortex and trough and the continuous strengthening of the upper level jet stream, combined with the influence of topographic convergence, provided extremely favorable conditions for the occurrence of the rainstorm.

Utilizing Iso-Value Field Curves in Lieu of Magnetic Field Lines Amid Infinite and Parallel Electrical Wires

Building on a new model proposed recently for calculating constant electro-magnetic field values, the present article explores the electro-magnetic field configuration generated by parallel electrical wires. This imposes a reevaluation of the drawing procedure for constructing field curves with a constant field values around multiple parallel electrical conducting wires. To achieve this, we employ methods akin to those used for creating contours on topographical maps, ensuring a consistent numerical field value along the entire length of the field curves. Subsequent calculations will be conducted for scenarios where wires are not parallel.

Trees species’ dispersal mode and habitat heterogeneity shape negative density dependence in a temperate forest

Conspecific negative density dependence(CNDD)is a potentially important mechanism in maintaining species diversity.While previous evidence showed habitat heterogeneity and species’dispersal modes affect the strength of CNDD at early life stages of trees(e.g.,seedlings),it remains unclear how they affect the strength of CNDD at later life stages.We examined the degree of spatial aggregation between saplings and trees for species dispersed by wind and gravity in four topographic habitats within a 25-ha temperate forest dynamic plot in the Qinling Mountains of central China.We used the replicated spatial point pattern(RSPP)analysis and bivariate paircorrelation function(PCF)to detect the spatial distribution of saplings around trees at two scales,15 and 50 m,respectively.Although the signal was not apparent across the whole study region(or 25-ha),it is distinct on isolated areas with specific characteristics,suggesting that these characteristics could be important factors in CNDD.Further,we found that the gravity-dispersed tree species experienced CNDD across habitats,while for wind-dispersed species CNDD was found in gully,terrace and low-ridge habitats.Our study suggests that neglecting the habitat heterogeneity and dispersal mode can distort the signal of CNDD and community assembly in temperate forests.

Ice flux of alpine glaciers controls erosion and landscape in the Nianbaoyeze Shan,northeastern Tibetan Plateau

The evolution of mountainous topography is the result of the interactions of climate,topography,and erosion.Glaciers are one of the most active erosional forces sculpting mountainous regions.However,our ability to understand this erosional force is limited by the controversy regarding the major factors controlling glacial erosion.We selected the Nianbaoyeze Shan,which is occupied by subcontinental glaciers(likely cold-based or polythermal glaciers)in the northeastern Tibetan Plateau,to study how erosion by alpine glaciers sculpts the landscape.We first applied a power law model(y=axb)fit to the cross-profiles of glacial valleys and analyzed the controlling factor of glacial erosion;we then identified the morphometric characteristics of the cirques to analyze the influencing factors,and investigated the development patterns of glacial valleys and cirques.Finally,we used hypsometry and the slopealtitude curves and reconstructed the palaeo-glacier surfaces and palaeo-Equilibrium Line Altitudes(ELAs)to determine if the glacial buzzsaw effect had impacted this glaciated region with subcontinental glaciers.Our findings show that ice flux is the main factor controlling glacial erosion.In this region,decreasing temperatures promote an increase in glacier mean size(i.e.,ice flux),which enhances the rate of glacial erosion.Cirque morphology is mainly influenced by aspect and the ELA.The development patterns of glacial valleys and cirques were dominated by a widening process.The ELAs of Marine Isotope Stage(MIS)-3 derived from the cirque floor altitudes or the Accumulation Area Ratio(AAR)and Area-Altitude Balance Ratio(AABR)coincide with the hypsometric maximum and the reduction in slopealtitude curves,which indicates that glacial buzzsaw has impacted this region.Furthermore,the glacial buzzsaw effect has profoundly influenced the mountain heights and topographic evolution in this subcontinental glaciated region.