We build an experiment system based on total reflection(TR) method to observe the evolution of real contact area of polymethyl methacrylate(PMMA) in the continual stick-slip movement. The bilateral friction is adopted...We build an experiment system based on total reflection(TR) method to observe the evolution of real contact area of polymethyl methacrylate(PMMA) in the continual stick-slip movement. The bilateral friction is adopted to overcome the bending moment in the lateral friction movement. Besides some classical phenomena of stick-slip movement such as periodical slow increase of frictional force in sticking phase and a sudden drop when slipping, a special phenomenon that the contact area increases with the tangential force is observed, which was called junction growth by Tabor in 1959.Image processing methods are developed to observe the variation of the junction area. The results show that the center of the strongest contact region will keep sticking under the tangential force until the whole slipping, the strongest point undergoes three stages in one cycle, which are named as sticking stage, fretting stage, and cracking stage, respectively. The combined analysis reveals a physical process of stick-slip movement: the tangential force causes the increase of the real contact area, which reduces the pressure between the contact spots and finally leads to the slipping. Once slipping occurs,the real contact area drops to the original level resulting in the pressure increase to the original level, which makes the sticking happen again.展开更多
An experimental method of measuring the real contact area of transparent blocks based on the principle of total internal reflection is presented, intending to support the investigation of friction characteristics, hea...An experimental method of measuring the real contact area of transparent blocks based on the principle of total internal reflection is presented, intending to support the investigation of friction characteristics, heat conduction, and energy dissipation at the contact interface. A laser sheet illuminates the contact interface, and the transmitted laser sheet is projected onto a screen. Then the contact information is acquired from the screen by a camera. An improved Otsu method is proposed to process the data of experimental images. It can compute the threshold of the overall image and filter out all the pixels one by one. Through analyzing the experimental results, we describe the relationship between the real contact area and the positive pressure during a continuous loading process, at different loading rates, with the polymethyl methacrylate（PMMA）material. A hysteresis phenomenon in the relationship between the real contact area and the positive pressure is found and explained.展开更多
It is very important to monitor surrounding rock deformation in tunnel construction. The principle, function, development and application of the system composed of a total station and computer for monitoring and analy...It is very important to monitor surrounding rock deformation in tunnel construction. The principle, function, development and application of the system composed of a total station and computer for monitoring and analyzing surrounding rock deformation were discussed. The new methods of two free station of 3D measurement and its mathematic adjustment mode were presented. The development of software for total station on-board and post for computer were also described. Without centering it and measuring its height, the total station controlled by the software on-board can fulfill the whole measurements to target points. Monitoring data can be processed by the post software and results of regression analysis, forecasting information of the tunnel surrounding rock deformation can be provided in time. The practical use shows that this system is practicable, highly accurate and efficient. It satisfies the needs of safety and information construction in tunnel construction of underground engineering.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11872033)the Beijing Natural Science Foundation,China(Grant No.3172017)
文摘We build an experiment system based on total reflection(TR) method to observe the evolution of real contact area of polymethyl methacrylate(PMMA) in the continual stick-slip movement. The bilateral friction is adopted to overcome the bending moment in the lateral friction movement. Besides some classical phenomena of stick-slip movement such as periodical slow increase of frictional force in sticking phase and a sudden drop when slipping, a special phenomenon that the contact area increases with the tangential force is observed, which was called junction growth by Tabor in 1959.Image processing methods are developed to observe the variation of the junction area. The results show that the center of the strongest contact region will keep sticking under the tangential force until the whole slipping, the strongest point undergoes three stages in one cycle, which are named as sticking stage, fretting stage, and cracking stage, respectively. The combined analysis reveals a physical process of stick-slip movement: the tangential force causes the increase of the real contact area, which reduces the pressure between the contact spots and finally leads to the slipping. Once slipping occurs,the real contact area drops to the original level resulting in the pressure increase to the original level, which makes the sticking happen again.
基金Project supported by the National Natural Science Foundation of China(Grant No.11272171)the Beijing Natural Science Foundation,China(Grant No.3132030)the Education Ministry Doctoral Fund of China(Grant No.20120002110070)
文摘An experimental method of measuring the real contact area of transparent blocks based on the principle of total internal reflection is presented, intending to support the investigation of friction characteristics, heat conduction, and energy dissipation at the contact interface. A laser sheet illuminates the contact interface, and the transmitted laser sheet is projected onto a screen. Then the contact information is acquired from the screen by a camera. An improved Otsu method is proposed to process the data of experimental images. It can compute the threshold of the overall image and filter out all the pixels one by one. Through analyzing the experimental results, we describe the relationship between the real contact area and the positive pressure during a continuous loading process, at different loading rates, with the polymethyl methacrylate（PMMA）material. A hysteresis phenomenon in the relationship between the real contact area and the positive pressure is found and explained.
基金Project(2000G033) supported by the S & T, Ministry of Railroad , China
文摘It is very important to monitor surrounding rock deformation in tunnel construction. The principle, function, development and application of the system composed of a total station and computer for monitoring and analyzing surrounding rock deformation were discussed. The new methods of two free station of 3D measurement and its mathematic adjustment mode were presented. The development of software for total station on-board and post for computer were also described. Without centering it and measuring its height, the total station controlled by the software on-board can fulfill the whole measurements to target points. Monitoring data can be processed by the post software and results of regression analysis, forecasting information of the tunnel surrounding rock deformation can be provided in time. The practical use shows that this system is practicable, highly accurate and efficient. It satisfies the needs of safety and information construction in tunnel construction of underground engineering.
