Toughening mechanism of lined Al_2O_3-ZrO_2 multiphaseceramics in SHS composite pipes

Hypoeutectic and hypereutectic Al2O3-ZrO2 multiphase ceramics-lined composite pipes were produced by using the gravitational separation self-propagate high-temperature synthesis （SHS） process. The microstructure of the ceramics was observed by means of SEM and EPMA. The fracture toughness of the multiphase ceramics was tested by using the Vickers indentation method. The fracture toughness of hypoeutectic Al2O3-ZrO2 multiphase ceramics is 15.96 MPa·m^1/2 and that of hypoeutectic Al2O3-ZrO2 multiphase ceramics is 15.23 MPa·m^1/2. The toughening mechanisms were systematically investigated by means of SEM and XRD. The results show that the bridging toughening mechanism, stress induced ZrO2 transformation toughening mechanism, and microcrack toughening mechanism are the predominant toughening mechanism.

SPECIAL EFFECT OF ULTRA-FINE RUBBER PARTICLES ON PLASTIC TOUGHENING

According to the present theories of plastic toughening, it is impossible to enhance the toughness, stiffness and/orheat resistance of plastics simultaneously by using rubber. A series of novel nano-rubber particles (UFPR) were introduced,which were prepared through irradiating common rubber lattices and spray drying them. Epoxies toughened with UFPRshowed a much better toughening effect than those with CTBN, and the heat resistance of epoxy was unexpectedly elevated.For polypropylene toughening, UFPR can improve the toughness, stiffness and heat resistance of PP simultaneously. Thesespecial toughening effects overcome the deficiencies in rubber toughening technology and are worth further investigating.

TOUGHENING OF POLYCARBONATE WITH PBA-PMMA CORE-SHELL PARTICLES

The miscibility,mechanical properties,morphology and toughening mechanism of PC/PBA-PMMA blends wereinvestigated.The dynamic mechanical results show that PC/PBA-PMMA blend has good miscibility and strong interfacialadhesion.The Izod impact strength of blend PC/PBA-PMMA with 4%(volume fraction)PBA-PMMA core-shell modifier is16 times higher than that of pure PC.The core-shell volume fraction and thickness of the PMMA shell have effect on thetoughness of PC/PBA-PMMA blends.As PMMA volume fraction increases,the toughness of PC/PBA-PMMA blendincreases,and reaches a maximum value at 30% volume fraction of PMMA or so.The tensile properties of PC/PBA-PMMAblend with a minimum amount of PBA-PMMA modifier show that brittle-tough transition has no significant variance incomparison with that of pure PC.The scanning electron microscopic(SEM)observation indicates that the tougheningmechanism of the blend with the pseudo-ductile matrix modified by small core-shell latex polymer particles is the synergeticeffect of cavitation and shear yielding of the matrix.

Synergistically Toughening Effect of SiC Whiskers and Nanoparticles in Al_2O_3-based Composite Ceramic Cutting Tool Material

In recent decades, many additives with different characteristics have been applied to strengthen and toughen Al2O3-based ceramic cutting tool materials. Among them, SiC whiskers and SiC nanoparticles showed excellent performance in improving the material properties. While no attempts have been made to add SiC whiskers and SiC nanoparticles together into the ceramic matrix and the synergistically toughening effects of them have not been studied. An Al2O3-SiCw-SiC np advanced ceramic cutting tool material is fabricated by adding both one-dimensional SiC whiskers and zero-dimensional SiC nanoparticles into the Al2O3 matrix with an effective dispersing and mixing process. The composites with 25 vol% SiC whiskers and 25 vol% SiC nanoparticles alone are also investegated for comparison purposes. Results show that the Al2O3-SiCw-SiCnp composite with both 20 vo1% SiC whiskers and 5 vol% SiC nanoparticles additives have much improved mechanical properties. The flexural strength of Al2O3-SiCw-SiCnp is 730＋ 95 MPa and fracture toughness is 5.6 ± 0.6 MPa.m1/2. The toughening and strengthening mechanisms of SiC whiskers and nanoparticles are studied when they are added either individually or in combination. It is indicated that when SiC whiskers and nanoparticles are added together, the grains are further refined and homogenized, so that the microstructure and fracture mode ratio is modified. The SiC nanoparticles are found helpful to enhance the toughening effects of the SiC whiskers. The proposed research helps to enrich the types of ceramic cutting tool and is benefit to expand the application range of ceramic cutting tool.

Strength-Toughening Model of Eutectic Ceramic Composite with Inherent Defects

Strengthening and toughening mechanisms in composite ceramics is complex. A change in a single parameter induces multiple property variations. The multiple changes in properties are often incompletely represented in theoretical models. This incompleteness in the parameter chosen fails to explain the mechanism of failure in composite ceramics. The exponential toughness function is used to represent the pull-out toughening mechanism, which dominates the crack growth resistance curve（R-curve）. The strengthening-toughening model is established based on the Mori-Tanaka method（M-T method）. The influence of inherent defects on toughness function and strength is analyzed by using this model. The theoretical result is compared with the experiment data. This model exactly reflects the change in strength. The theoretical result indicates that defects change the toughness function. Moreover, micro-cracks increase toughness size ac, and the strength of crack instable extensions acutely decreases as defect content increases. This presented model establishes the relationship among the important mechanical parameters of defect, strength, elastic modulus, and the R-curve.

FRACTURAL PROCESS AND TOUGHENING MECHANISM OF LAMINATED CERAMIC COMPOSITES

Based on the model of multi-layer beam and the assumption of micro-inhomogeneity of material, the 3D fractural characteristics of laminated ceramic composites have been studied with numerical simulation. Under three-point bending load, crack initiation, coalescence, propagation, tuning off in the weak interface and final rupture have been simulated. The spatial distribution and evolution process of acoustic emission are also presented in the paper. The simulation verifies the primary mechanism of the weak interface inducing the crack to expand along there and absorbing the fractural energy. The disciplinary significance of the effect of strength and properties of material on the toughness and strength of laminated ceramic composites is, therefore, discussed in this paper.

TOUGHENING OF IN SITU SYNTHESIZED MoSi_2-SiC COMPOSITE AT ROOM TEMPERATURE

The in situ synthesized MoSi2-SiC composite is proved to be of higher fracture toughness than the monolithic MoSi2. The TEM and HREM study reveals that the interface between MoSi2/SiC is of direct atomic bonding without any amorphous glassy phase, such the SiO2 structure. Based on the fractography and the observation of crack propagation path from indentation, it is concluded that the toughening of such composite at room temperature can be attributed to the high interfacial binding energy, the refinement of the MoSi2 matrix and the deflection and bridging behavior in the crack propagation.

Transformation toughening of Al_2O_3/ZrO_2 laminated ceramics with residual compressive stress

With the help of scanning electronic microscopy and X-ray diffraction, the relationships of microstructure characteristics, phase assemblage, and fracture micrograph of Al2O3/ZrO2 laminated ceramics were studied. Compared with monolithic Al2O3/ZrO2 ceramics, the existence of surface compressive stresses greatly restrained the growth of ZrO2 and Al2O3 grains at high sinter temperature, fined the grain size, and increased the content of metastable t-ZrO2, which made the fracture transformation energy quantity 70% higher than that of the monolithic ceramics. The trans-granular and inter-granular fracture features were observed in the surface and center layers, which further verified that transformation toughening is the main mechanism, whereas, micro-crack toughening is helpful for enhancing fracture toughness.

A review of the strengthening–toughening behavior and mechanisms of advanced structural materials by multifield coupling treatment

The application of an external field is a promising method to control the microstructure of materials, leading to their improved performance. In the present paper, the strengthening and toughening behavior of some typical high-performance structural materials subjected to multifield coupling treatment, including electrostatic field, electro-pulse current, thermal field, and stress field, are reviewed in detail. In addition to the general observation that the plasticity of materials could be increased by multi-external fields, strength enhancement can be achieved by controlling atomic diffusion or phase transformations. The paper is not limited to the strengthening and toughening mechanisms of the multifield coupling effects on different types of structural materials but is intended to provide a generic method to improve both the strength and ductility of the materials. Finally, the prospects of the applications of multi-external fields have also been proposed based on current works.

Strengthening and Toughening Effect of Yttrium on Al_(2)O_(3)/TiCN Ceramic Tool Material

The strengthening and toughening effect of yttrium on an advanced Al2O3/TiCN ceramic tool material was studied by means of SEM 9 TEM and energy spectrum analysis. Results showed that yttrium can react with the impurity elements such as W, Fe, Cr, etc. Thus, the interfaces between ceramic phases are purified and the interfacial binding strength is increased. As a result, the mechanical properties of the AL2O3/TiCN ceramic tool material reinforced with yttrium are improved significantly. In addition, the effect of yttrium on particle strengthening of the solid solution TiCN may partly contribute to the improvement of the mechanical properties.

Erosion and Toughening Mechanisms of Electroless Ni-P-Nano-NiTi Composite Coatings on API X100 Steel under Single Particle Impact

The addition of superelastic NiTi to electroless Ni-P coating has been found to toughen the otherwise brittle coatings in static loading conditions, though its effect on erosion behaviour has not yet been explored. In the present study, spherical WC-Co erodent particles were used in single particle impact testing of Ni-P-nano-NiTi composite coatings on API X100 steel substrates at two average velocities—35 m/s and 52 m/s. Erosion tests were performed at impact angles of 30°, 45°, 60°, and 90°. The effect of NiTi concentration in the coating was also examined. Through examination of the impact craters and material response at various impact conditions, it was found that the presence of superelastic NiTi in the brittle Ni-P matrix hindered the propagation of cracks and provided a barrier to crack growth. The following toughening mechanisms were identified: crack bridging and deflection, micro-cracking, and transformation toughening.

Improving the Compatibility of Biodegradable Poly (Lactic Acid) Toughening with Thermoplastic Polyurethane (TPU) and Compatibilized Meltblown Nonwoven

Poly (Lactic Acid) (PLA) is a biodegradable polymer which originates from natural resources such as corn and starch, offering excellent strength, biodegradability, nevertheless its inherent brittleness and low impact resistance properties have limited its application. On the other hand, Thermoplastic Polyurethane (TPU) has high toughness, durability and flexibility, which is one of the most potential alternatives for enhancing the flexibility and mechanical strength of Poly (Lactic Acid) (PLA) by blending it with a compatibilizer. With the aim to improve the mechanical and thermal properties of Poly (Lactic Acid) (PLA) meltblown nonwovens, The Thermoplastic Polyurethane (TPU) was melt blended with Poly (Lactic Acid) (PLA) at the different corresponding proportions for toughening the Poly (Lactic Acid) and the corresponding PLA/TPU MBs (meltblown nonwovens) were also manufactured. Joncryl ADR 4400 is mixed into the PLA matrix during processing. It was found that Joncryl had a much higher chain extension that substantially increased the molecular weight of the PLA matrix. SEM study revealed that Joncryl ADR 4400 is a good compatibilizer. Moreover, in this study, the crystallization, thermal and rheological behaviors of the corresponding PLA and TPU blends were also investigated. PLA/TPU MBs were also characterized by morphology and mechanical properties. The rheological property of the PLA/TPU meltblown nonwoven revealed that the viscosity is increasing as the amount of TPU is increasing in the blend, PLA/TPU meltblown nonwovens exhibited excellent mechanical properties;they are soft, elastic, and have certain tensile strength. New materials have potential applications in the medical and agricultural fields. Joncryl ADR 4400 compatibilized blends showed higher strength than simple PLA/TPU blends at the same PLA/TPU ratio.

Tuning of non-uniform switch toughening in ferroelectric composites by an electric field

This paper deals with a mode III interfacial crack subject to anti-plane stress and in-plane electric fields. The analysis concentrates on the tuning of fracture toughness from non-uniform ferroelectric-ferroelastic domain switching by an electric field. The electric loading changes the size of the asymmetric switching zone. Employing the weight function method, we obtain the electrically-dependent switch toughening for stationary and quasi-static growing interfacial cracks, respectively. Multi-domain solutions are derived for non-poled and fully-poled ferroelectric composites. Numerical results are presented on the electric field tuning of the critical applied stress intensity factor. The research provides ways to optimize fracture properties of ferroelectric composites by altering the electric field.

BRIDGE-TOUGHENING ANALYSIS OF THE FIBER REINFORCED COMPOSITE CONTAINING INTERPHASE EFFECT

A detailed fracture mechanics analysis of bridge-toughening in a fiber reinforced composite is presented in this paper. The integral equation governing bridge-toughening as well as crack opening displacement (COD) for the composite with interfacial layer is derived from the Castigliano's theorem and interface shear-lag model. A numerical result of the COD equation is obtained using the iteration solution of the second Fredholm integral equation. In order to investigate the effect of various parameters on the toughening, an approximate analytical solution of the equation is present and its error analysis is performed, which demonstrates the approximate solution to be appropriate. A parametric study of the influence of the crack length, interfacial shear modules, thickness of the interphase, fiber radius, fiber volume fraction and properties of materials on composite toughening is therefore carried out. The results are useful for experimental demonstration and toughening design including the fabrication process of the composite.

EFFECTS OF IMPURITIES AND RARE EARTH ADDITION ON THE TOUGHENING LEVELS OF Al-Li BASED ALLOYS 2090 AND 1420

The effects of the impurities Fe, Si, Na, K and a rare earth addition, Ce, on the intrinsic and extrinsic toughening levels have been investigated for the Al-Li based alloys 2090 and 1420. 29K reduction in the toughening level for the alloy 2090 with impurities 0.42% Fe+Si or 0.0132% Na+K i4 identified to be caused by the impurities.An improvement on the fracture toughness can be made by adding 0.05%-0.25% Ce to the alloy 2090. The reason behind this is that Ce microalloying can not only enhance both the intrinsic toughening level and the extrinsic toughening level but also suppress the embrittling behavior of the impurities. However, 0.06%-0.15% Ce microalloying fails to bring about any beneficial effect to the toughening level for the alloy 1420.

Effects of Trace Zinc on Toughening and Strengthening of Steels

Impact bend and static tensile comparison tests are carried out between zinc-containing steels and those without.Marked variation of each index is sophisticatedly observed.The results indicate that trace zinc can remarkably strengthen toughening and strengthening of cast and forged steel through quenching,tempering or air hardening.

BRIDGING TOUGHENING OF EPOXY RESINS BY DISPERSED THERMOPLASTICS

The particulate toughening behaviour of epoxy resins modified by ductile thermoplastics is elucidated here by various bridging models. The experimental data for three different epoxy/PSF sys- tems are presented to illustrate the trend of the toughening characteristics. The conventional continuous bridging model is shown to have underestimated the effect of the particulate toughening. A joint appli- cation of the discrete bridging model and the multiple bridging model, however, shows promising result for modified epoxy systems such as AG80/DDS/PSF and E51/DDS/PSF. These models also provide quantitative descriptions for the crack pinning phenomenon previously observed by Fu and Sun in AG80/DDS/PSF.

ASYMPTOTIC ANALYSIS OF PLANE-STRAIN MODE I STEADY-STATE CRACK GROWTH IN TRANSFORMATION TOUGHENINGCERAMICS(Ⅱ)

Based on a constitutive law which includes the shear components oftransformation plasticity. the asymptotic solutions to near-tip fields of plane-strainmode I steadity propagating cracks in rransformed ceramics are obtained for the caseof linear isotropic hardening. The Stress singularity. the distributions of stresses andvelocities at the crack tip are determmed for various material parameters. The factorsinfluencing the near-tip fields are discussed in detail.

Review:Progress in Core-shell Rubber Particles for Efficiently Toughening Resins

Core-shell toughening particles are structured composite particles consisting of generally two different components, one at the center as a rubbery elastic core and surrounding by the second as a glassy inelastic shell. The design, preparation, and application of core-shell polymer particles have been briefly reviewed. Morphological characteristics of the core-shell particles by transmission electron microscopy(TEM) and scanning electron microscopy(SEM) are focused. The vital factors that are useful to control core-shell morphology and toughening properties including core-shell monomer species, polymerization conditions, cross-linking reagents, synthetic method, and post-processing techniques are analyzed. Distinguished properties are mainly considered as the most desirable features that endow core-shell polymer particles with various applicabilities, particularly as effectively toughening components in brittle epoxy resin and polylactide that are substrate of copper clad laminate widely used in the modern electronic world and environmentally friendly materials that are useful as packaging films, disposable tableware, biomedical equipment, and new energy vehicles.

AN INVESTIGATION OF HIGH-TEMPERATURE DEFORMATION STRENGTHENING AND TOUGHENING MECHANISM OF TITANIUM ALLOY

The high-temperature deformation strengthening and toughening mechanisms of titanium alloys have been investigated in this paper. The materials processed by this method produce a new tri-modal microstrvcture, which consists of 10-20% equiaxed alpha, streaky alpha and transformed beta matrix. It is found that the higher ductility of tri-modal microstructure is attributed to the equiaxed alpha's coopemtive slip and coordinated deformation with the transformed beta matrix. The streaky alpha phases not only increase the strength and creep properties, but also increase the fracture toughness. Propagating along grain boundaries between two neighboring streaky alpha phases, cracks in tri-modal microstructure make a more tortuous way, and then the materials show a higher fracture toughness. This new method is applicable to α, near α,α+β and near β titanium alloys.