Research on service capacity of widened intersection based on traffic simulation

Delay analysis method is adopted to study the service capacity of a widened intersection. Traffic simulation software VISSIM is used for microscopic simulation of a widened intersection so as to obtain a delay curve. The delay-volume model of a widened intersection is established based on traffic simulation. The suggested value of basic service capacity of the widened left-turn lane is given along with how to determine correction factors and practical service capacity.

Efficient Origin-Destination Estimation Using Microscopic Traffic Simulation with Restricted Rerouting

Traffic simulators are utilized to solve a variety of traffic-related problems.For such simulators,origin-destination(OD)traffic volumes as mobility demands are required to input,and we need to estimate them.The authors regard an OD estimation as a bi-level programming problem,and apply a microscopic traffic simulation model to it.However,the simulation trials can be computationally expensive if full dynamic rerouting is allowed,when employing multi-agent-based models in the estimation process.This paper proposes an efficient OD estimation method using a multi-agent-based simulator with restricted dynamic rerouting to reduce the computational load.Even though,in the case of large traffic demand,the restriction on dynamic rerouting can result in heavier congestion.The authors resolve this problem by introducing constraints of the bi-level programming problem depending on link congestion.Test results show that the accuracy of the link traffic volume reproduced with the proposed method is virtually identical to that of existing methods but that the proposed method is more computationally efficient in a wide-range or high-demand context.

Analyzing influence of bicycles on traffic flow using microscopic simulation approach

Mixed traffic consisting of cars and bicycles is a typical pattern of urban traffic in China. To study the impact of bicycles on traffic performance, a microscopic simulating model based on the principle of cautious driving and collision free was proposed. The interaction between cars and bicycles were described by lateral friction and overlapping driving. The dynamical features of speed and time-headway were investigated by numerical simulations. The results show that bicycles have a significant impact on travel speed and time-headway. The effect of bicycles can cause different results in the free flow phase and congestion phase respectively. The results also indicate the necessity to mitigate the interaction between motorized vehicles and non-motorized vehicles.

Scheduling of high-speed rail traffic based on discrete-time movement model

In this paper, a new simulation approach for solving the mixed train scheduling problem on the high-speed double-track rail line is presented. Based on the discrete-time movement model, we propose control strategies for mixed train movement with different speeds on a high-speed double-track rail line, including braking strategy, priority rule, travelling strategy, and departing rule. A new detailed algorithm is also presented based on the proposed control strategies for mixed train movement. Moreover, we analyze the dynamic properties of rail traffic flow on a high-speed rail line. Using our proposed method, we can effectively simulate the mixed train schedule on a rail line. The numerical results demonstrate that an appropriate decrease of the departure interval can enhance the capacity, and a suitable increase of the distance between two adjacent stations can enhance the average speed. Meanwhile, the capacity and the average speed will be increased by appropriately enhancing the ratio of faster train number to slower train number from 1.

Modeling and Generating Realistic Background Traffic by Hybrid Approach

One of the key challenges in largescale network simulation is the huge computation demand in fine-grained traffic simulation.Apart from using high-performance computing facilities and parallelism techniques,an alternative is to replace the background traffic by simplified abstract models such as fluid flows.This paper suggests a hybrid modeling approach for background traffic,which combines ON/OFF model with TCP activities.The ON/OFF model is to characterize the application activities,and the ordinary differential equations(ODEs) based on fluid flows is to describe the TCP congestion avoidance functionality.The apparent merits of this approach are(1) to accurately capture the traffic self-similarity at source level,(2) properly reflect the network dynamics,and(3) efficiently decrease the computational complexity.The experimental results show that the approach perfectly makes a proper trade-off between accuracy and complexity in background traffic simulation.

Evaluation of Merge Control Strategies at Interstate Work Zones under Peak and Off-Peak Traffic Conditions

Maintenance and rehabilitation projects of interstate facilities typically mandate lane closures. Lane closures require merging maneuvers that often result in reduced speeds and traffic bottlenecks. Work zone impacts on traffic operations are magnified when project durations are extended. Conventionally, work zone traffic control plans are developed to address work zone impacts. This study evaluated various merge control strategies at interstate work zones peak and off-peak traffic conditions and summarized related impacts. A comprehensive microscopic simulation model was developed in full consideration of driver/vehicle behavior at work zones. The analysis of simulation results revealed that merge control strategies, when implemented during peak and off-peak conditions, can preserve the level of service and provide favorable mobility, safety, and environmental impacts. In addition, results indicate that transportation agencies’ practice of scheduling work zone activities during the off-peak may not be the most optimum approach. Overall, the findings of this study highlight the need for evaluation of work zone scheduling practices in full consideration of agency, user, and project costs.

Modeling and Evaluation of the Impact of Motorcycles Mobility on Vehicular Traffic

Traffic simulation can help to evaluate the impact of different mobility behaviors on the traffic flow from safety, efficiency, and environmental views. The objective of this paper is to extend the SUMO (Simulation of Urban Mobility) road traffic simulator to model and evaluate the impact of motorcycles mobility on vehicular traffic. First, we go through diverse mobility aspects and models for motorcycles in SUMO. Later, we opt for the most suitable mobility models of motorcycles. Finally, the impact of motorcycle mobility on different kinds of vehicles is investigated in terms of environment, fuel consumption, velocity and travel time. The result of modeling and evaluation shows that based on the mobility model of the motorcycle, vehicular traffic flow can be enhanced or deteriorated.

Traffic Dataset and Dynamic Routing Algorithm in Traffic Simulation

The purpose of this research is to create a simulated environment for teaching algorithms,big data processing,and machine learning.The environment is similar to Google Maps,with the capacity of finding the fastest path between two points in dynamic traffic situations.However,the system is significantly simplified for educational purposes.Students can choose different traffic patterns and program a car to navigate through the traffic dynamically based on the changing traffic.The environments used in the project are Visual IoT/Robotics Programming Language Environment(VIPLE)and a traffic simulator developed in the Unity game engine.This paper focuses on creating realistic traffic data for the traffic simulator and implementing dynamic routing algorithms in VIPLE.The traffic data are generated from the recorded real traffic data published on the Arizona Maricopa County website.Based on the generated traffic data,VIPLE programs are developed to implement the traffic simulation with support for dynamic changing data.

Traffic organization during urban road constructions

This research presented a bi-level programming approach to optimize the schedule of ur- ban road construction activities based on a hypothetical transport network, with an objective of mini- mizing the overall traffic delays. A heuristic algorithm was utilized to identify a set of road construction schedules, while PARAMICS was adopted to estimate the total travel time in the network under each road construction scenario. To test the performance of proposed heuristics-simulation methodology, a numerical test was implemented. The overall results suggested that the proposed methodol- ogy could quickly find the optimum solution with good convergence.

A Feasible Partial Train Traffic Simulation Using Diagram Expressed in Network

Simulating large-scale and complex systems is commonly considered a difficult and time-consuming task. In this paper, we propose a partial simulation way to speed up the simulation with real time demands. It is based on the idea that a train traffic diagram is expressed in a network, and through calculating the maximal long path in the network the simulation is done, but only within a particular partial area.Upon this, we let it become a problem oriented simulation. The simulation could be started at any time,from any trains or at any stations and stopped as the same way according to the problem to be concerned.We can use this kind of simulation to analyse or confirm the correctness of traffic schedule at a high speed to meet the real time demands.

Microscopic Fuzzy Urban Traffic Simulation with Variable Demand

Some microscopic traffic simulations on urban road network are developed up to now. However, the effect of urban transport policy in the local city is influenced with the complex interaction of automobile traffic and public transport traffic. Particularly, behaviours of vehicles should be described with the fuzziness of the subjective recognition and operation. On the other hand, the trip makers are influenced by various transport policies in terms of mode choice behaviour. The change in mode choice behaviour and number of public transport mode users would eventually affect traffic flow conditions on road network. Modal spilt and traffic conditions of a network are interrelated. Therefore, the present study mainly aims to integrate mode choice model and microscopic traffic simulation model based on fuzzy logic. In the study, the fuzzy logic based mode choice model is proposed. The proposed mode choice model and the existing microscopic traffic simulation model are combined. The developed model has been applied on real urban network to demonstrate the effectiveness of the installation of LRT system. Finally, it is helpful for evaluation of transport policy that the fuzzy logic based microscopic traffic simulation with modal choice model has been constructed.

Traffic simulation and forecasting system in Beijing

Transport system is a time-varying, huge and complex system. In order to have the traffic management department make pre-appropriate traffic management measures to adjust the traffic management control program, and release travel information to travelers, to provide optimal path options to ensure that the transport system operates efficiently and safely, we have to monitor the changing of the state of road traffic and to accurately evaluate the state of the traffic, then to predict the future state of traffic. This paper represents the construction of the road traffic flow simulation including the logical structure and the physical structure, and introduces the system functions of forecasting system in Beijing.

Study on the Signal Control System of Urban Traffic with a Genetic Algorithm

In the paper the aim and meaning of traffic microscopic simulation is discussed first, and then three sub-models of the system are established, e. i. the model for random generation of the vehicles, the model for car-following and lane change influenced by an adjacent vehicle, and the model for control and optimization of intersection with signal. Optimization of the traffic signal timing with a genetic algorithm and a microscopic simulation is carried out. It represents a novel approach to solving optimal signal timing.

An ATMS data-driven method for signalized arterial coordination

In order to minimize the delays and stops caused by the early started coordinated green phase of the vehicle- actuated signal systems, a stochastic offsets calculation method based on the new types of advanced traffic management system （ATMS） data is proposed. As the mainline green starts randomly in vehicle-actuated signal systems, the random theory is applied to obtain the distribution of the unused green time at side streets based on the green gap-out mechanism. Then, the green start time of the mainline can be selected at the point with maximum probability to minimize the delays or stops caused by the randomly started mainline green. A case study in Maine, USA, whose traffic conditions are similar to those of the middle-size Chinese cities, proves that the proposed method can significantly reduce the travel time and delays.

Cellular automata modeling of pedestrian＇s crossing dynamics

Cellular automata modeling techniques and the characteristics of mixed traffic flow were used to derive the 2-dimensional model presented here for simulation of pedestrian’s crossing dynamics. A conception of “stop point” is introduced to deal with traffic obstacles and resolve conflicts among pedestrians or between pedestrians and the other vehicles on the crosswalk. The model can be easily extended, is very efficient for simulation of pedestrian’s crossing dy- namics, can be integrated into traffic simulation software, and has been proved feasible by simulation experiments.

Calibration of a rule-based intelligent network simulation model

This paper is focused on calibration of an intelligent network simulation model （INS1M） with reallife transportation network to analyse the INSIM＇s feasibility in simulating commuters＇ travel choice behaviour under the influence of real-time integrated multimodal traveller information （IMTI）. A transportation network model for the central and western areas of Singapore was simulated in PARAMICS and integrated with INSIM expert system by means of an application programming interface to form the INSIM. Upon calibration, INSIM was able to realistically present complicated scenarios in which real-time IMTI was provided to commuters and the network performance measures being recorded.

Datamining and Its Applications

Artificial intelligence and machine learning are widely applied in all domain applications today,including noncontact vital sign monitoring,data mining and denoising,data analysis,and application as traffic simulation and green finance.We briefly introduce the noncontact vital sign monitoring using video data and the solutions to this problem supplied by Artificial intelligence and machine learning.Then,we present the five papers selected in the related areas for this journal issue.

Evolvement regularity of signal control parameters of urban road in cold region

In snow-icy road environment, the survey data indicate that the largest decrease in traffic flow running characters occurs when snow and ice begin to accumulate on the road surface. Saturation flow is decreased by 16% , speed is decreased by 30% , and start-up lost time is increased by 27%. Based on the signal control theory of HCM and Webster, the character values of traffic flow in different urban road environments were investigated, and the evolvement regularity of signal control parameters such as cycle, split, green time, offset, yellow time and red time in snow-icy road environment was analyzed. The impact factors and the changes in the scope of signal control parameters were achieved. Simulation results and practical application show that the signal control plan of road enviromnent without snow and ice will increase the vehicle delay, stop length and traffic congestion in snow-icy road environment. Thus, the traffic signal control system should address a suitable signal control plan based on different road environments.

Sensitivity Analysis of Key Input Parameters in Microscopic Simulation of Congested and Uncongested Arterial Signals

This study involved investigating the sensitivity of Measures of Effectiveness （MOEs） to different simulation initialization time （7, 10, and 13 minutes）; observing the trend of variation of MOEs with increasing simulation runs; and identifying the major contributors of variation in MOEs using CORSIM and SimTraffic. The results showed that （1） the MOEs of a simulated intersection approaches were indeed sensitive to initialization times; （2） the variation within MOEs reached a steady state with increased number of simulation runs, while CORSIM required at least 50 simulation runs, SimTraffic required even higher number of runs for congested approaches; （3） lane changing and gap acceptance parameters play a major role as a source of variation of MOEs （delay/vehicle） in CORSIM and SimTraffic respectively.

Enhancing Urban Mobility: Exploring the Potential of Exclusive Motorcycle Lane Using VISSIM

The proliferation of Mobility on Demand (MOD) services has ushered in a surge of ridesharing platforms, catalyzing the emergence of micro mobility solutions like motorcycle sharing. Consequently, motorcycles have witnessed unprecedented growth over recent decades. This proliferation, while offering convenience, has introduced challenges such as diminished road capacity, and compromised safety. This study advocates for the implementation of exclusive motorcycle lanes to mitigate the ensuing disorderliness using VISSIM microsimulation platform. Empirical data from a key corridor in Dhaka is harnessed to calibrate and simulate network performance scenarios—pre- and post-implementation of dedicated motorcycle lanes. The outcomes of our simulation experiments exhibit the implementation of dedicated motorcycle lanes leads to a reduction in vehicular throughput but improvement the flow of motorcycles. In addition, Surrogate Safety Measures (SSMs) demonstrate the safety improvements through implementation of the treatment.