Calculating models on surface tension of RE_2O_3-Mg O-SiO_2(RE=La, Nd, Sm, Gd and Y) melts

A thermodynamic model was developed for determining the surface tension of RE2O3-MgO-SiO2(RE=La, Nd, Sm, Gd and Y) melts considering the ionic radii of the components and Butler's equation. The temperature and composition dependence of the surface tensions in molten RE2O3-MgO-SiO2 slag systems was reproduced by the present model using surface tensions and molar volumes of pure oxides, as well as the anionic and cationic radii of the melt components. The iso-surface tension lines of La2O3-MgO-SiO2 slag melt at 1873 K were calculated and the effects of slag composition on the surface tension were also investigated. The surface tensions of La2O3, Gd2O3, Nd2O3 and Y2O3 at 1873 K were evaluated as 686, 677, 664 and 541 m N/m, respectively. The surface tension of pure rare earth oxide melts linearly decreases with increasing cationic field strength, except for Y2O3 oxide, while Y2O3 has a much weaker surface tension. The evaluated results of the surface tension show good agreements with literature data, and the mean deviation of the present model is found to be 1.05% at 1873 K.

APPLICATION OF WYATT-WHITE METHOD TO CALCULATING INTRINSIC RATES OF INCREASE FOR HYMENOPTEROUS PARASITOIDS

The method developed by Wyatt and White (1977) was applied to calculate the intrinsic rates of increase for parasitoids based on 23 fecundity data sets from the literature. The studies showed that there existed the linear relationship between the accurate values of rm and In f (Md) / d or In (A/d/2) / d, that is, 1) rm= 0.845 In (Md) / d or 2) rm= 0.880 In (Md/ 2) / d. Where d is the prereproductive time, Md is the number of female offspring produced per original female from the first to the dthday of reproduction, and Md/2 is the number of female offspring produced per original female from the first to the (d/ 2) th day of reproduction. These equations can provide the accurate estimates of rm for parasitoids in this study. The approach is advantageous because it does not require the construction of detailed fecundity tables for estimating parasitoid rates of increase. Of course, whether these equations are appropriate for the other taxa will need to be further studied.

Calculating Method for Influence of Material Flow on Energy Consumption in Steel Manufacturing Process

From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.

NEW METHODS FOR CALCULATING ACTIVITIES OF COMPONENTS FROM PHASE DIAGRAMS IN BINARY PERITECTIC SYSTEMS

ＮＥＷＭＥＴＨＯＤＳＦＯＲＣＡＬＣＵＬＡＴＩＮＧＡＣＴＩＶＩＴＩＥＳＯＦＣＯＭＰＯＮＥＮＴＳＦＲＯＭＰＨＡＳＥＤＩＡＧＲＡＭＳＩＮＢＩＮＡＲＹＰＥＲＩＴＥＣＴＩＣＳＹＳＴＥＭＳ①ＺｈａｎｇＹｏｎｇｊｕｎＨｕｎａｎＳｕｐｅｒｉｏｒＴｅｃｈＭａｔｅｒｉ...

The Calculating Model of Structural Analysis for Jack-Up Rig Legs

The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at home and abroad in structural analyses for truss jack-up rig legs, this paper introduces a new calculation model which is more reasonable. This model can simulate better the load situation of a rig reflecting more precisely the effects of the leg loads caused by the spring support of gearboxes of the jacking system and the secondary bending moment raised by hull displacement under extreme conditions. The rig conversion was completed in 1989. In July 1991 the rig safely stood the frontal hitting of Typhoon with the wind speed of 52 m / s, which shows that the checking on the structure is correct.

Research on spatial calculating analysis model of landuse change

The spatial calculating analysis model is based on GIS overlay. It will compartmentalize the land in research district into three spatial types: unchanged parts, converted parts and increased parts. By this method we can evaluate the numerical model and dynamic degree model for calculating land-use change rates. Furthermore, the paper raises the possibility of revising the calculating analysis model of spatial information in order to predicate more precisely the dynamic changing level of all types of land uses. In the most concrete terms, the model is used mainly to understand changed area and changed rates (increasing or decreasing) of different land types from microcosmic angle and establish spatial distribution and spatio-temporal principles of the changing urban lands. And we will try to find out why the situation can take place by combining social and economic situations. The result indicates the calculating analysis model of spatial information can derive more accurate procedure of spatial transference and increase of all kinds of land from microcosmic angle. By this model and technology we can conduct the research of land-use spatio-temporal structure evolution more systematically and more deeply, and can obtain a satisfactory result. The result will benefit the rational planning and management of urban land use of developed coastal areas in China in the future.

N-Calculator与NUFER耦合模型和组合预测法在食物氮足迹研究中的应用

为改善传统N-Calculator模型的局限性,加强食物氮足迹核算结果与环境影响的联系,提高活性氮管理预见性,将N-Calculator模型与食物系统养分流动(Nutrient Flows in Food Chains,Environment and Resources Use,NUFER)模型进行耦合,以估算我国2001—2020年人均食物氮足迹,建立组合预测体系。结果显示:2001—2020年,我国人均食物氮足迹由16.04 kg N/a增至18.95 kg N/a;全国食物氮足迹由20.47 Mt N/a增至26.76 Mt N/a;居民饮食结构正由以植物源食物为主的低氮消费模式转向以动物源食物为主的高氮消费模式;食物生产过程产生的活性氮的最终归宿为大气(64.3%)、水体和深层土壤(35.7%);我国食物氮足迹与人均可支配收入、城市化率、动物源食物消费氮占比呈正相关性,与恩格尔系数呈负相关性;未来10 a我国人均食物氮足迹呈增长趋势,预测结果显示年均增幅为0.16 kg N/a。

Method of branch ariflow for calculatinga complicated mine ventilation networks

The solutions widely used at present for calculating complicated mine ventilation networks are ones in which resistance of the branches and characteristic parameters of the fans are taken as basic input data. But it is time and energy consuming to obtain the branch resistance values. A new solution is developed in this paper in which the branch resistance values are obtained through measuring and evaluating the airflow of the whole ventilation network. Theoretical analysis is made of the establishment of a linear equation series with branch resistance as unknown numbers, an equation series for which one, and only one, result of solutions exists. This solution is programmed in C language and passed on a personal computer. The programmed solution programmed proves of practical use, as demonstrated by specific examples. Being different from other solutions, the method takes the branch airflow and fan working points as basic input data, and the present solution is of greater advantage for calculating ventilation networks of mines in operation.

A methodology for calculating the passenger comfort benefits of railway travel

A comfortable environment in railway passenger coaches can be regarded as a resource for social consumption during the transport process. Railway passenger comfort benefits （RPCBs） can be regarded as a special generalized cost. In this paper, we select a series of objective and subjective indexes to formulate a quantitative method of calculating the RPCB with considering ticket fares. This method includes three steps： make the initial data dimensionless, calculate the weight of each index, and finally calculate the RPCBs. The proposed method was validated with the data collected from two types of trains： G13 from Beijing South to Shanghai Hongqiao and T109 from Beijing to Shanghai. Also, questionnaire survey was conducted in both trains. After data processing, the results show that there is a linear relationship between the RPCB and ticket fare with a correlation coefficient of 0.9616.

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dynamic armor target under the complex background,the multi-line array infrared detection system is established based on the combination of the single unit infrared detector.The surface dimension features of ground armored targets are identified by size calculating solution algorithm.The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target.According to the characteristics of the target signal,a custom threshold de-noising function is proposed to solve the problem of signal preprocessing.The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage.The method solves the disadvantages of wide scanning interval and low detection probability of single unit infrared detection.By reducing the scanning interval,the number of random rendezvous in the infrared feature area of the upper surface is increased,the accuracy of the size calculating is guaranteed.The experiments results show that in the fuzzy recognition method,the size calculating is introduced as the feature operator,which can improve the recognition ability of the ground armor target with different shape size.

A General Calculating Method of Rotor’s Torsional Stiffness Based on Stiffness Influence Coefficient

In order to develop a general calculating rotor’s torsional stiffness based on stiffness influence coefficient for different rotor assembling, the calculation method of the torsional stiffness influence coefficient of equal thickness disc is researched in this paper at first. Then the torsional stiffness influence coefficient λ of equal thickness disc is fit to a binary curved face and a calculation equation is obtained based on a large quantity of calculating data, which lays the foundation for research on a general calculating method of rotor torsional stiffness. Thirdly a simplified calculation method for equivalent stiffness diameter of stepped equal thickness disc and cone disc in the steam turbine generators is suggested. Finally a general calculating program for calculating rotor’s torsional vibration features is developed, and the torsional vibration features of a verity of steam turbine rotors are calculated for verification. The calculating results show that stiffness influence coefficient λ of equal-thickness disc depends on parameters of B and H, as well as the stiffness influence coefficient λ;and discs with complex structure can be simplified to equal-thickness discs with little error by using the method suggested in this paper;error can be controlled within 1% when equivalent diameter of stiffness is calculated by this method.

Determine the Stress Calculating Mode of Sliding Failure of Soil Mass under the Push-Extend Multi-under-Reamed Pile

Through the analysis of the sliding failure form of soil mass under the bearing push-extend reamed of Push-extend Multi-under-reamed Pile, in the paper, the law of coulomb-Mohr is used to establish a stress function and the theory of the sliding line is used to establish Prandtl regional stress field, which determines the stress calculating mode of soil mass and provides a theoretical basis for a further study of this type of pile ultimate bearing capacity of soil mass.

A CALCULATING METHOD OF THE KILL PROBABILITY ATTACK AREA FOR AAM

This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.

The Method of Calculating Average Skidding Distance

By analyzing the existing average skidding distance formulac and the shape of the landing area, theauthors put forward that the average skidding distance is the shortest when the ratio of length and width is 1, and the landing collectioll area is in proportion to of average geometrical skidding distance. The new models of calculating average distance are presented.

Junction Pressure Composing MethodCalculating the Total Resistance of Mine Ventilation Network

In mine ventilation network calculation, the total ventilatiou perameters, such as total specific resistance and total natural veutilatiou pressure of an overall mine ventilation system, play an important role on selecting main fan and regulating its operating point. This paper explains the critical effect of network’ s total parameter calculation on the above two aspects and presents a new method, the junction pressure composing method(JPC method), which can be applied to calculate the total resistance.of an overall, complex and multi-fan ventilation network. Based on the total ressistance and airflow rate of main fan, total specific resistance of a natwork is easily calculated. This method gets rid of those shortcomings in the route airflow working mathod(RAW method), greatly improves computing speed and adaptability, and can calculate the total parameters of a mine ventilation network rapidly and conveniently. This method is proved to be correct and reliable by example tests.

Calculating method of circle radius using genetic algorithms

Some improved methods of the traditional genetic algorithms were proposed and their application in calculating circle radius was discussed. Simulation shows that real number encoding, simulated annealing and saving the best individual into the next generation can effectively improve the accuracy and speed up the searching for global optimization. It is also shown that improved genetic algorithms can effectively calculate the circle radius and be realized easily using computer.

CALCULATING ACTIVITIES USING Δfus H（Aη）（ Bξ） AND CALCULATION OF ACTIVITIES IN Ga-As, Ga-Sb AND In-Sb SYSTEMS

ＣＡＬＣＵＬＡＴＩＮＧＡＣＴＩＶＩＴＩＥＳＵＳＩＮＧΔｆｕｓＨＡηＢξＡＮＤＣＡＬＣＵＬＡＴＩＯＮＯＦＡＣＴＩＶＩＴＩＥＳＩＮＧａＡｓ，ＧａＳｂＡＮＤＩｎＳｂＳＹＳＴＥＭＳ①ＬｉＷｅｎｃｈａｏ，ＺｈｏｕＧｕｏｚｈｉ，ＬｉＸｉｎｇｋａｎｇ，Ｄｉｎ...

Calculating Model of Interference Amount for Miniaturized Gear and Shaft Shrink Fit

Based on miniaturized components＇ characteristics, the method of assembling miniaturized gear and shaft together with corresponding calculating model of the interference amount are proposed. On the basis of main effecting factors analysis on the gear and shaft assembling interference amount, calculating formula including all factors effective on the interference amount necessary for reliable system running was built up. The methods of reverse calculating theoretical model was used to build up the equivalent simulation model of the theoretical one, together with simulation verification and case study for calculating formula. The results show that the cold assembling method is applicable for miniaturized gear and shaft, but in the assembling process, the interference amount compensating the shape error of contacting surfaces takes a large proportion, which is the main cause of stress variance on contacting surfaces.

Rapidly calculating the partition function of macroscopic systems

It has remained an open problem to accurately compute the partition function of macroscopic systems since the establishment of statistical physics. A rapid method approaching this problem was presented and was strictly tested by molecular dynamic （MD） simulations on Ar atoms in both dense gaseous and liquid states. The outcomes from the method on the internal energy and the work of isothermal expansion （and therefore the free energy） are in good agreement with the MD simulations, suggesting the method would be immediately applied in vast areas.

Solution-Distance-Based Migration Rate Calculating for Biogeography-Based Optimization

Biogeography-based optimization(BBO),a natureinspired optimization algorithm(NIOA),has exhibited a huge potential in optimization.In BBO,the good solutions have a large probability to share information with poor solutions,while poor solutions have a large probability to accept the information from others.In original BBO,calculating for migration rates is based on solutions' ranking.From the ranking,it can be known that which solution is better and which one is worse.Based on the ranking,the migration rates are calculated to help BBO select good features and poor features.The differences among results can not be reflected,which will result in an improper migration rate calculating.Two new ways are proposed to calculate migration rates,which is helpful for BBO to obtain a suitable assignment of migration rates and furthermore affect algorithms ' performance.The ranking of solutions is no longer integers,but decimals.By employing the strategies,the ranking can not only reflect the orders of solutions,but also can reflect more details about solutions' distances.A set of benchmarks,which include 14 functions,is employed to compare the proposed approaches with other algorithms.The results demonstrate that the proposed approaches are feasible and effective to enhance BBO's performance.