The transformation of aldose to ketose or common sugars into rare saccharides,including rare ketoses and aldoses,is of great value and interest to the food industry and for saccharidic biomass utilization,medicine,and...The transformation of aldose to ketose or common sugars into rare saccharides,including rare ketoses and aldoses,is of great value and interest to the food industry and for saccharidic biomass utilization,medicine,and the synthesis of drugs.Nowadays,high-fructose corn syrup(HFCS)is industrially produced in more than 10 million tons annually using immobilized glucose isomerase.Some low-calorie saccharides such as tagatose and psicose,which are becoming popular sweeteners,have also been produced on a pilot scale in order to replace sucrose and HFCS.However,current catalysts and catalytic processes are still difficult to utilize in biomass conversion and also have strong substrate dependence in producing high-value,rare sugars.Considering the specific reaction properties of saccharides and catalysts,since the pioneering discovery by Fischer,various catalysts and catalytic systems have been discovered or developed in attempts to extend the reaction pathways,improve the reaction efficiency,and to potentially produce commercial products.In this review,we trace the history of sugar isomerization/epimerization reactions and summarize the important breakthroughs for each reaction as well as the difficulties that remain unresolved to date.展开更多
Both cis- and trans-isomers of 4-(2-(9-anthryl) vinyl) pyridine were isolated and their molecular structures established by X-ray crystallographic method. Variable temperature 1H NMR spectroscopy was used to study the...Both cis- and trans-isomers of 4-(2-(9-anthryl) vinyl) pyridine were isolated and their molecular structures established by X-ray crystallographic method. Variable temperature 1H NMR spectroscopy was used to study the trans to cis isomerization of the title compound. The kinetic study of the reaction was based on the ratio of the NMR integration heights in toluene-d8 of the double doublet due to the cis-isomer at δ 8.51 to that of the multiplet at δ 8. 15 which was kept constant during the whole experiment. The isomerization process was found to be first order and the Arrhenius activation parameters E8, ln A, Δ H≠ and ΔS≠ were calculated as 27.84 kJ/mol, 6.71, 25.23 kJ/mol and ?197.89 J/(K·mol), respectively. Besides, conformational analyses of both compounds based on molecular modeling were carried out and the results were used to compare with the experimental data.展开更多
In-situ MgO-doped ordered mesoporous carbon(OMC@MgO)was fabricated by formaldehyde-free self-assembly method,in which biomass-derived tannin was used as carbon precursor replacing fossil-based phenolics,Mg^(2+)as both...In-situ MgO-doped ordered mesoporous carbon(OMC@MgO)was fabricated by formaldehyde-free self-assembly method,in which biomass-derived tannin was used as carbon precursor replacing fossil-based phenolics,Mg^(2+)as both cross-linker and precursor of catalytic sites.Up to~20 wt% MgO could be doped in the carbon skeleton with good dispersion retaining well-ordered mesoporous structures,while more MgO content(35 wt%)led to the failing in the formation of ordered mesoporous structure.The OMC@MgO possessed a high specific surface area(298.8 m^(2) g^(-1)),uniform pore size distribution(4.8 nm)and small crystallite size of MgO(1.73 nm)due to the confinement effect of ordered mesoporous structure.Using OMC@MgO as the heterogeneous catalyst,a maximum fructose yield of 32.4% with a selectivity up to 81.1%was achieved from glucose in water(90℃,60 min),which is much higher than that obtained using the MgO doped active carbon via conventional post-impregnation method(26.5%yield with 58.3% selectivity).Higher reaction temperature(>90℃)resulted in decrease of selectivity due to the formation of humins.The designed OMC@MgO displayed tolerant to high initial glucose concentrations(10 wt%)and could remain good recyclability without significant loss of activity for three cycles.展开更多
The non-noble metal modified sulfated zirconia was found easy to deactivate.Herein,highly active and highly stable non-noble core-shell Ni-S_(2)O_(8)^(2−)/Al_(2)O_(3)@ZrO_(2) catalysts(Ni-SA@Z-x,x=Al content in wt%)ha...The non-noble metal modified sulfated zirconia was found easy to deactivate.Herein,highly active and highly stable non-noble core-shell Ni-S_(2)O_(8)^(2−)/Al_(2)O_(3)@ZrO_(2) catalysts(Ni-SA@Z-x,x=Al content in wt%)have been successfully prepared and investigated for n-pentane isomerization.The results showed that the core-shell Ni-SA@Z-30 provided a sustained high isopentane yield(63.1%)with little or no deactivation within 5000 min at a mild reaction pressure of 2.0 MPa,which can be attributed to the following factors:(i)carbon deposition was greatly suppressed by the large pore size and huge pore volume;(ii)the loss of sulfur entities was suppressed because the small and highly dispersed tetragonal ZrO_(2) particles can bond with the S species strongly;(iii)strong Brønsted acidity can be maintained well after the isomerization.The pore structures and acid nature of the core-shell Ni-SA@Z-x are entirely different from those of the normal structure Ni-S_(2)O_(8)^(2−)/ZrO_(2)-Al_(2)O_(3),even though the Al content and the compositions of the individual components are the same.The Al_(2)O_(3)cores endow the catalysts with high internal surface area and high mechanical strength.Meanwhile,the ZrO_(2) shell,which consists of more and smaller tetragonal ZrO_(2) particles because of the large surface area of the Al_(2)O_(3)core,promotes the formation of more stable sulfur species and stronger binding sites.展开更多
We present a quantum dynamics study on the isotope effects of hydro-gen transfer isomerization in the formic acid dimer,and this is achieved by multidimensional dy-namics calculations with an efficient quantum mechani...We present a quantum dynamics study on the isotope effects of hydro-gen transfer isomerization in the formic acid dimer,and this is achieved by multidimensional dy-namics calculations with an efficient quantum mechanical theoretical scheme developed by our group,on a full-dimensional neural network ab initio potential energy surface.The ground-state and fundamental tun-neling splittings for four deuterium isotopologues of formic acid dimer are considered,and the calculated results are in very good general agreement with the avail-able experimental measurements.Strong isotope effects are revealed,the mode-specific funda-mental excitation effects on the tunneling rate are evidently influenced by the deuterium sub-stitution of H atom with the substitution on the OH bond being more effective than on the CH bond.Our studies are helpful for acquiring a better understanding of isotope effects in the double-hydrogen transfer processes.展开更多
A series of Ferrierite(FER)zeolites were prepared via hydrothermal synthesis in the absence of organic templates with the aid of sodium-type FER zeolite(NaFER)or NaFER suspensions(NaFERsus)acquired by NaOH solution tr...A series of Ferrierite(FER)zeolites were prepared via hydrothermal synthesis in the absence of organic templates with the aid of sodium-type FER zeolite(NaFER)or NaFER suspensions(NaFERsus)acquired by NaOH solution treatment as seeds.The differences in the structures and acid sites of the obtained FER zeolite catalysts arising from the choice of seed were investigated,and the catalytic performances of the obtained FER zeolites were evaluated in the skeletal isomerization of n-butene.The results indicate that the samples synthesized using NaFERsus feature more Br?nsted acid sites(BAS)in the 10-membered-ring(10-MR)at the expense of strong acid and Lewis acid sites(LAS),compared with samples derived from NaFER.Therefore,the FER samples synthesized using NaFERsus outperformed the NaFER counterparts as the BAS in 10-MR and LAS were the main active sites,while BAS in 8-MR and LAS were responsible for side reactions,such as polymerization,cracking,and carbon deposition in n-butene isomerization.The optimized FER catalyst was continuously used for 720 h at 350℃ at 0.1 MPa under an n-butene space velocity of 2.0 h^(-1),during which the n-butene conversion remained at>40%,and the isobutylene yield was>37.5%.展开更多
The isomerization of n-pentane to generate high-quality blending components for clean gasoline was catalyzed by several amide-AlCl3-based ionic liquid(IL) analogs with various amides as donor molecules. The catalytic ...The isomerization of n-pentane to generate high-quality blending components for clean gasoline was catalyzed by several amide-AlCl3-based ionic liquid(IL) analogs with various amides as donor molecules. The catalytic performance of these IL analogs was evaluated in a magnetic agitated autoclave operated in batch mode.IL analog based n-methylacetamide(NMA)-AlCl3 with the amide/AlCl3 molar ratio of 0.65 showed excellent performance toward n-pentane isomerization because 0.65 NMA-1.0 AlCl3 had a low viscosity and bidentate coordination structure. The influences of reaction time, reaction temperature, and stirring speed on the catalytic performance were also investigated. Optimal reaction conditions comprised the reaction time of 1 h, the reaction temperature of 40 °C, and the stirring speed of 1500 r·min-1. Under optimal condition, the n-C5 conversion,research octane number(RON) increment, total liquids yield, and isoparaffin yield in isomerized oil were56.80%, 13.51, 89.90 wt%, and 44.32 wt%, respectively. A new mathematical model was constructed to predict the relationships among RON increment, RON increment/n-C5 conversion ratio, and n-C5 conversion. The new model indicated that an appropriate conversion per pass of n-C5 did not exceed 50%–55%. Various cycloparaffin additives were used to improve the catalytic performance of 0.65 NMA-1.0 AlCl3. The n-C5 conversion increased from 56.80% to 67.32%. The RON increment, total liquids yield, and isoparaffin yield reached 17.83, 97.36 wt%,and 63.74 wt%, respectively.展开更多
A novel fibrous silica Y zeolite (HSi@Y) loaded with Pt has been studied based on its ability to produce protonic acid sites originating from molecular hydrogen. The Pt/HSi@Y was prepared using seed assisted crystalli...A novel fibrous silica Y zeolite (HSi@Y) loaded with Pt has been studied based on its ability to produce protonic acid sites originating from molecular hydrogen. The Pt/HSi@Y was prepared using seed assisted crystallization followed by protonation and Pt-loading. The product formed had a spherical morphology with bicontinuous lamellar with a diameter in the range of 500-700 nm. The catalytic activity of the Pt/HSi@Y has been assessed based on light linear alkane (C5-C7) isomerization in a micro-catalytic pulse reactor at 423-623 K. A pyridine IR study confirmed that the introduction of fibrous silica on Y zeolite increased the Lewis acid sites corresponding with the formation of extra-framework Al which led to the generation of more protonic acid sites. A hydrogen adsorbed IR study showed that the protonic acid sites which act as active sites in the isomerization were formed via dissociative-adsorption of molecular hydrogen releasing electrons to the nearby Lewis acid sites. Thus, it is suggested that the presence of Pt and HSi@Y with a high number of Lewis acid as well as weak Bronsted acid sites improved the activity and stability in C5, C6 and C7 isomerization via hydrogen spill-over mechanism.展开更多
The isomerization reaction of pinene is one of the most important chemical reactions in the deep processing of pinene. The purpose of this study is to improve the performance of the metatitanic acid by composite. The ...The isomerization reaction of pinene is one of the most important chemical reactions in the deep processing of pinene. The purpose of this study is to improve the performance of the metatitanic acid by composite. The composite metatitanic acid catalyst TiM was prepared by adding Mn elements in the preparation process. The catalytic performance of TiM was evaluated. Comparison of TiM and metatitanic acid catalyst(Ti-FGP), the reaction rate of TiM catalyst was faster, and after the reaction, the yield of camphene and tricyclene increased about 1%. The catalysts were characterized by an SEM, FT-IR and laser particle size analyzer. The results show that the pinene isomerization reaction requires the synergistic action of the Br?nsted acid and Lewis acid.Br?nsted acid has great influence on the activity of catalyst, and Lewis acid has a great influence on the selectivity of the catalyst. The structure and morphology of the catalyst have a certain effect on the selectivity of pinene isomerization reaction.展开更多
The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framewor...The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framework, in which the bulk MoOx phase is large enough to form typical mesoporous structure, is promising in terms of its advantages of both improved mechanical strength and high catalytic properties over the supported MoOx and bulk MoOx catalyst.展开更多
Cis-trans isomerization of [9]-annulenanion(1) and its 2-fluoro-,2-chloro-and 2-bromo-derivatives(2,3 and 4,respectively) were investigated at the HF/6-31G* and B3LYP/6-311++G** levels of theory.Cis,cis,cis,c...Cis-trans isomerization of [9]-annulenanion(1) and its 2-fluoro-,2-chloro-and 2-bromo-derivatives(2,3 and 4,respectively) were investigated at the HF/6-31G* and B3LYP/6-311++G** levels of theory.Cis,cis,cis,cis structures appear more stable than their corresponding cis,cis,cis,trans-isomers.The relative height of energy barriers for cis-trans isomerization is:2cis 〉1cis 〉3cis〉 4cis.This trend for the reverse trans-cis isomerization follows the electronegativity of the substituent at C-2(2trans 3trans 4trans 1trans).展开更多
The ionic liquid Et3NHC1-2AIC13 can catalyze the isomerization of n-pentane. This paper investigates the ionic liquid catalyzed isomerization performance of n-pentane with several product distribution improvers in an ...The ionic liquid Et3NHC1-2AIC13 can catalyze the isomerization of n-pentane. This paper investigates the ionic liquid catalyzed isomerization performance of n-pentane with several product distribution improvers in an autoclave. The product distribution of n-pentane isomerization could be improved by such improvers as benzene, cyelohexane, and methyl cyclohexane at the expense of conversion of n-pentane. The optimal product distribution improver was determined to be cyclohexane. The yield of isomerate and the selectivity of liquid isoalkanes increased, whereas the conversion of n-pentane decreased, with increasing cyclohexane amount. At the same conversion of n-pentane, the research octane number (RON) of liquid product, with cyclohexane amount of 0.5 wt%, was about 1.3 higher than that without cyclohexane. At the same reaction conditions, the presence of cyclohexane enhanced the yield of isomerate, the selectivity of liquid isoalkanes, and the RON of the liquid product, but reduced the conversion of n-pentane.展开更多
An efficient isomerization of alkynyl ketones to (E,E)-diene ketones was developed. The reaction catalyzed by 20 mol% triphenylphosphine in aqueous media gave the desired products in good yields.
The catalytic properties of MoOx and incorporation Ni onto the MoOx for the isomerization of heptane have been investigated under atmospheric pressure at different conditions such as different flow rate of H2, differe...The catalytic properties of MoOx and incorporation Ni onto the MoOx for the isomerization of heptane have been investigated under atmospheric pressure at different conditions such as different flow rate of H2, different reaction temperature etc.. Compared with MoOx, the Ni addition to the MoOx markedly improved the isomerization activity of heptane by improving the reducibility of MoO3 and activation of H2 in reaction.展开更多
The catalyst NiW/HSAPO-11 was prepared by impregnating Ni and W onto HSAPO-11 zeolite with two different methods. The isomerization and aromatization properties were investigated with an microreactor using n-octane ...The catalyst NiW/HSAPO-11 was prepared by impregnating Ni and W onto HSAPO-11 zeolite with two different methods. The isomerization and aromatization properties were investigated with an microreactor using n-octane as a feedstock. NiW/HSAPO-11 shows a high hydroconversion activity of n-octane, and the optimum operating parameters for the catalyst to produce high octane number products were: 400℃, 2.0MPa, VH2:Vn-octane= 400:1, liquid hourly space velocity LHSV=1.0h-1. Under the optimum reaction condition, the conversion efficiency, C5 liquid + product selectivity, isomerization and aromatization product selectivity were 69.80%, 56.95%, 79.73% and 1.29% respectively. The catalyst (S1) impregnated with Ni and W after the HSAPO-11 zeolite was combined with Al2O3 matrix, performed better than the catalyst (S2) impregnated with Ni and W before combining with the Al2O3 matrix.展开更多
B3LYP/6-31++G** method was applied to investigate the mechanism of alanine isomerization.12 minima and 22 transition states were obtained after optimization and several paths of isomerization were found.It is foun...B3LYP/6-31++G** method was applied to investigate the mechanism of alanine isomerization.12 minima and 22 transition states were obtained after optimization and several paths of isomerization were found.It is found that intramolecular single-bond rotation and proton transfer might lead to isomerization.The energy barrier of C–N bond rotation was lower than 2.52 kcal·mol 1,while the energy barrier ranges of the rotation of C–C and C–O were separately 0.43~ 7.01 and 4.69~12.19 kcal·mol 1,and the minimum energy barrier of proton transfer was 30.76 kcal·mol 1.The most probable isomerization path and mechanism for the two most stable conformations was discussed to find that the highest energy barrier to be crossed in this path was 11.87 kcal·mol 1.In order to understand the microscopic nature why only 4 conformations were detected in the experiment,thermodynamic properties of all conformations at the experimental temperature of 391 K was calculated.It is found that conformations XII,XI,X and IX can only unidirectionally convert into conformations rapidly with low energy and vanish immediately.The other conformations were distributed according to Maxwell-Boltzman's law,and the distribution probabilities of conformations I,II,III,IV,V,VI,VII and VIII were respectively 27.2%,26.5%,25.8%,6.4%,5.2%,4.8%,2.5% and 1.6%.Conformations I,II and III with bigger probability and stronger absorption peak were easy to detect in the experiment.Conformation IV had a relatively smaller probability(6.4%) and weak absorption peak which,however,could also be identified.The other conformations had too small probability to identify in the spectrum.展开更多
Herein lies a convenient and highly efficient method of olefin isomerization in the presence of RuCl3?3H2O in ionic liquid(IL). More importantly, RuCl3?3H2O is a robust and recyclable catalyst. Nine cycles of RuCl...Herein lies a convenient and highly efficient method of olefin isomerization in the presence of RuCl3?3H2O in ionic liquid(IL). More importantly, RuCl3?3H2O is a robust and recyclable catalyst. Nine cycles of RuCl3?3H2O as the catalyst were performed for the isomerization reactions of the selected substrate in IL and MeOH.展开更多
The structure and mechanism of isomerization of CH3SB have been studied by using DFT method at the B3LYP/6-311G** level. The computational results reveal that the energy of singlet state of CH3SB is lower than that ...The structure and mechanism of isomerization of CH3SB have been studied by using DFT method at the B3LYP/6-311G** level. The computational results reveal that the energy of singlet state of CH3SB is lower than that of triplet state, so the former should be the ground state. Two transition states of isomerization of singlet state of CH3SB have been determined at the B3L-YP/6- 311G** level, too. The methyl linked to sulfur atom is first transferring to the boron atom, to which the hydrogen atom of methyl is then transferring. According to the results of this paper, reaction paths of isomerizations of CH3SB are studied thoroughly with IRC method.展开更多
In this study,EU-1 zeolite was successfully synthesized via a quasi-solid state approach and assembled to catalyst for the C 8 aromatics isomerization process.The catalytic properties were tuned through careful modifi...In this study,EU-1 zeolite was successfully synthesized via a quasi-solid state approach and assembled to catalyst for the C 8 aromatics isomerization process.The catalytic properties were tuned through careful modification of the acidity of EU-1 zeolites and metal-doping of the catalyst.It was shown that EU-1 was an excellent candidate for the C 8 aromatics isomerization process due to its unique structure.In addition,steam treatment of EU-1 at 450-500 ℃ could optimize the acidic properties of the catalyst,hence enhance its catalytic performance.The effect of the amount of Pt on ethylbenzene conversion was studied and the optimum amount was determined to be about 0.3-0.4 wt%.It was confirmed that EU-1 zeolite prepared via a quasi-solid state approach and then dealuminated by steam treatment had better activity and selectivity than conventional mordenite(MOR) zeolite and could be an excellent candidate for C 8 aromatics isomerization.展开更多
基金Financial support by Dual Initiative Project of Jiangsu Province and Changzhou University is gratefully acknowledgedSample analysis supported by Analysis and Testing Center,NERC Biomass of Changzhou University was also greatly acknowledged.
文摘The transformation of aldose to ketose or common sugars into rare saccharides,including rare ketoses and aldoses,is of great value and interest to the food industry and for saccharidic biomass utilization,medicine,and the synthesis of drugs.Nowadays,high-fructose corn syrup(HFCS)is industrially produced in more than 10 million tons annually using immobilized glucose isomerase.Some low-calorie saccharides such as tagatose and psicose,which are becoming popular sweeteners,have also been produced on a pilot scale in order to replace sucrose and HFCS.However,current catalysts and catalytic processes are still difficult to utilize in biomass conversion and also have strong substrate dependence in producing high-value,rare sugars.Considering the specific reaction properties of saccharides and catalysts,since the pioneering discovery by Fischer,various catalysts and catalytic systems have been discovered or developed in attempts to extend the reaction pathways,improve the reaction efficiency,and to potentially produce commercial products.In this review,we trace the history of sugar isomerization/epimerization reactions and summarize the important breakthroughs for each reaction as well as the difficulties that remain unresolved to date.
基金Project supported by The University of Hong Kong and Hong Kong Baptist University
文摘Both cis- and trans-isomers of 4-(2-(9-anthryl) vinyl) pyridine were isolated and their molecular structures established by X-ray crystallographic method. Variable temperature 1H NMR spectroscopy was used to study the trans to cis isomerization of the title compound. The kinetic study of the reaction was based on the ratio of the NMR integration heights in toluene-d8 of the double doublet due to the cis-isomer at δ 8.51 to that of the multiplet at δ 8. 15 which was kept constant during the whole experiment. The isomerization process was found to be first order and the Arrhenius activation parameters E8, ln A, Δ H≠ and ΔS≠ were calculated as 27.84 kJ/mol, 6.71, 25.23 kJ/mol and ?197.89 J/(K·mol), respectively. Besides, conformational analyses of both compounds based on molecular modeling were carried out and the results were used to compare with the experimental data.
基金supported by the Natural Science Fund for Distinguished Young Scholars of Tianjin (17JCJQJC45500)the National Natural Science Foundation of China (NSFC,21876091 and 22178181)Tianjin Municipal Science and Technology Project (18PTZWHZ00150).
文摘In-situ MgO-doped ordered mesoporous carbon(OMC@MgO)was fabricated by formaldehyde-free self-assembly method,in which biomass-derived tannin was used as carbon precursor replacing fossil-based phenolics,Mg^(2+)as both cross-linker and precursor of catalytic sites.Up to~20 wt% MgO could be doped in the carbon skeleton with good dispersion retaining well-ordered mesoporous structures,while more MgO content(35 wt%)led to the failing in the formation of ordered mesoporous structure.The OMC@MgO possessed a high specific surface area(298.8 m^(2) g^(-1)),uniform pore size distribution(4.8 nm)and small crystallite size of MgO(1.73 nm)due to the confinement effect of ordered mesoporous structure.Using OMC@MgO as the heterogeneous catalyst,a maximum fructose yield of 32.4% with a selectivity up to 81.1%was achieved from glucose in water(90℃,60 min),which is much higher than that obtained using the MgO doped active carbon via conventional post-impregnation method(26.5%yield with 58.3% selectivity).Higher reaction temperature(>90℃)resulted in decrease of selectivity due to the formation of humins.The designed OMC@MgO displayed tolerant to high initial glucose concentrations(10 wt%)and could remain good recyclability without significant loss of activity for three cycles.
文摘The non-noble metal modified sulfated zirconia was found easy to deactivate.Herein,highly active and highly stable non-noble core-shell Ni-S_(2)O_(8)^(2−)/Al_(2)O_(3)@ZrO_(2) catalysts(Ni-SA@Z-x,x=Al content in wt%)have been successfully prepared and investigated for n-pentane isomerization.The results showed that the core-shell Ni-SA@Z-30 provided a sustained high isopentane yield(63.1%)with little or no deactivation within 5000 min at a mild reaction pressure of 2.0 MPa,which can be attributed to the following factors:(i)carbon deposition was greatly suppressed by the large pore size and huge pore volume;(ii)the loss of sulfur entities was suppressed because the small and highly dispersed tetragonal ZrO_(2) particles can bond with the S species strongly;(iii)strong Brønsted acidity can be maintained well after the isomerization.The pore structures and acid nature of the core-shell Ni-SA@Z-x are entirely different from those of the normal structure Ni-S_(2)O_(8)^(2−)/ZrO_(2)-Al_(2)O_(3),even though the Al content and the compositions of the individual components are the same.The Al_(2)O_(3)cores endow the catalysts with high internal surface area and high mechanical strength.Meanwhile,the ZrO_(2) shell,which consists of more and smaller tetragonal ZrO_(2) particles because of the large surface area of the Al_(2)O_(3)core,promotes the formation of more stable sulfur species and stronger binding sites.
基金supported by the National Natural Sci-ence Foundation of China(No.21973098 and No.22133003)the Beijing National Laboratory for Molecular SciencesJianwei Cao acknowledges the Youth Innovation Promotion Association CAS(No.2018045).
文摘We present a quantum dynamics study on the isotope effects of hydro-gen transfer isomerization in the formic acid dimer,and this is achieved by multidimensional dy-namics calculations with an efficient quantum mechanical theoretical scheme developed by our group,on a full-dimensional neural network ab initio potential energy surface.The ground-state and fundamental tun-neling splittings for four deuterium isotopologues of formic acid dimer are considered,and the calculated results are in very good general agreement with the avail-able experimental measurements.Strong isotope effects are revealed,the mode-specific funda-mental excitation effects on the tunneling rate are evidently influenced by the deuterium sub-stitution of H atom with the substitution on the OH bond being more effective than on the CH bond.Our studies are helpful for acquiring a better understanding of isotope effects in the double-hydrogen transfer processes.
基金the funding of the project by the CNPC Corporation (2018B-1907)。
文摘A series of Ferrierite(FER)zeolites were prepared via hydrothermal synthesis in the absence of organic templates with the aid of sodium-type FER zeolite(NaFER)or NaFER suspensions(NaFERsus)acquired by NaOH solution treatment as seeds.The differences in the structures and acid sites of the obtained FER zeolite catalysts arising from the choice of seed were investigated,and the catalytic performances of the obtained FER zeolites were evaluated in the skeletal isomerization of n-butene.The results indicate that the samples synthesized using NaFERsus feature more Br?nsted acid sites(BAS)in the 10-membered-ring(10-MR)at the expense of strong acid and Lewis acid sites(LAS),compared with samples derived from NaFER.Therefore,the FER samples synthesized using NaFERsus outperformed the NaFER counterparts as the BAS in 10-MR and LAS were the main active sites,while BAS in 8-MR and LAS were responsible for side reactions,such as polymerization,cracking,and carbon deposition in n-butene isomerization.The optimized FER catalyst was continuously used for 720 h at 350℃ at 0.1 MPa under an n-butene space velocity of 2.0 h^(-1),during which the n-butene conversion remained at>40%,and the isobutylene yield was>37.5%.
基金Supported by the National Natural Science Foundation of China(21802047)the Scientific Research Funds of Huaqiao University(600005-Z17Y0073).
文摘The isomerization of n-pentane to generate high-quality blending components for clean gasoline was catalyzed by several amide-AlCl3-based ionic liquid(IL) analogs with various amides as donor molecules. The catalytic performance of these IL analogs was evaluated in a magnetic agitated autoclave operated in batch mode.IL analog based n-methylacetamide(NMA)-AlCl3 with the amide/AlCl3 molar ratio of 0.65 showed excellent performance toward n-pentane isomerization because 0.65 NMA-1.0 AlCl3 had a low viscosity and bidentate coordination structure. The influences of reaction time, reaction temperature, and stirring speed on the catalytic performance were also investigated. Optimal reaction conditions comprised the reaction time of 1 h, the reaction temperature of 40 °C, and the stirring speed of 1500 r·min-1. Under optimal condition, the n-C5 conversion,research octane number(RON) increment, total liquids yield, and isoparaffin yield in isomerized oil were56.80%, 13.51, 89.90 wt%, and 44.32 wt%, respectively. A new mathematical model was constructed to predict the relationships among RON increment, RON increment/n-C5 conversion ratio, and n-C5 conversion. The new model indicated that an appropriate conversion per pass of n-C5 did not exceed 50%–55%. Various cycloparaffin additives were used to improve the catalytic performance of 0.65 NMA-1.0 AlCl3. The n-C5 conversion increased from 56.80% to 67.32%. The RON increment, total liquids yield, and isoparaffin yield reached 17.83, 97.36 wt%,and 63.74 wt%, respectively.
基金supported by the Universiti Teknologi Malaysia through Research University Grant No. 13H61 and 19H04
文摘A novel fibrous silica Y zeolite (HSi@Y) loaded with Pt has been studied based on its ability to produce protonic acid sites originating from molecular hydrogen. The Pt/HSi@Y was prepared using seed assisted crystallization followed by protonation and Pt-loading. The product formed had a spherical morphology with bicontinuous lamellar with a diameter in the range of 500-700 nm. The catalytic activity of the Pt/HSi@Y has been assessed based on light linear alkane (C5-C7) isomerization in a micro-catalytic pulse reactor at 423-623 K. A pyridine IR study confirmed that the introduction of fibrous silica on Y zeolite increased the Lewis acid sites corresponding with the formation of extra-framework Al which led to the generation of more protonic acid sites. A hydrogen adsorbed IR study showed that the protonic acid sites which act as active sites in the isomerization were formed via dissociative-adsorption of molecular hydrogen releasing electrons to the nearby Lewis acid sites. Thus, it is suggested that the presence of Pt and HSi@Y with a high number of Lewis acid as well as weak Bronsted acid sites improved the activity and stability in C5, C6 and C7 isomerization via hydrogen spill-over mechanism.
基金supported by the Fujian Green Pine Co.,Ltd(NO.2016001)
文摘The isomerization reaction of pinene is one of the most important chemical reactions in the deep processing of pinene. The purpose of this study is to improve the performance of the metatitanic acid by composite. The composite metatitanic acid catalyst TiM was prepared by adding Mn elements in the preparation process. The catalytic performance of TiM was evaluated. Comparison of TiM and metatitanic acid catalyst(Ti-FGP), the reaction rate of TiM catalyst was faster, and after the reaction, the yield of camphene and tricyclene increased about 1%. The catalysts were characterized by an SEM, FT-IR and laser particle size analyzer. The results show that the pinene isomerization reaction requires the synergistic action of the Br?nsted acid and Lewis acid.Br?nsted acid has great influence on the activity of catalyst, and Lewis acid has a great influence on the selectivity of the catalyst. The structure and morphology of the catalyst have a certain effect on the selectivity of pinene isomerization reaction.
文摘The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framework, in which the bulk MoOx phase is large enough to form typical mesoporous structure, is promising in terms of its advantages of both improved mechanical strength and high catalytic properties over the supported MoOx and bulk MoOx catalyst.
文摘Cis-trans isomerization of [9]-annulenanion(1) and its 2-fluoro-,2-chloro-and 2-bromo-derivatives(2,3 and 4,respectively) were investigated at the HF/6-31G* and B3LYP/6-311++G** levels of theory.Cis,cis,cis,cis structures appear more stable than their corresponding cis,cis,cis,trans-isomers.The relative height of energy barriers for cis-trans isomerization is:2cis 〉1cis 〉3cis〉 4cis.This trend for the reverse trans-cis isomerization follows the electronegativity of the substituent at C-2(2trans 3trans 4trans 1trans).
基金support was provided by the National Science Foundation of China(Grant Nos.20806091,20976194,and 21036008)
文摘The ionic liquid Et3NHC1-2AIC13 can catalyze the isomerization of n-pentane. This paper investigates the ionic liquid catalyzed isomerization performance of n-pentane with several product distribution improvers in an autoclave. The product distribution of n-pentane isomerization could be improved by such improvers as benzene, cyelohexane, and methyl cyclohexane at the expense of conversion of n-pentane. The optimal product distribution improver was determined to be cyclohexane. The yield of isomerate and the selectivity of liquid isoalkanes increased, whereas the conversion of n-pentane decreased, with increasing cyclohexane amount. At the same conversion of n-pentane, the research octane number (RON) of liquid product, with cyclohexane amount of 0.5 wt%, was about 1.3 higher than that without cyclohexane. At the same reaction conditions, the presence of cyclohexane enhanced the yield of isomerate, the selectivity of liquid isoalkanes, and the RON of the liquid product, but reduced the conversion of n-pentane.
文摘An efficient isomerization of alkynyl ketones to (E,E)-diene ketones was developed. The reaction catalyzed by 20 mol% triphenylphosphine in aqueous media gave the desired products in good yields.
文摘The catalytic properties of MoOx and incorporation Ni onto the MoOx for the isomerization of heptane have been investigated under atmospheric pressure at different conditions such as different flow rate of H2, different reaction temperature etc.. Compared with MoOx, the Ni addition to the MoOx markedly improved the isomerization activity of heptane by improving the reducibility of MoO3 and activation of H2 in reaction.
文摘The catalyst NiW/HSAPO-11 was prepared by impregnating Ni and W onto HSAPO-11 zeolite with two different methods. The isomerization and aromatization properties were investigated with an microreactor using n-octane as a feedstock. NiW/HSAPO-11 shows a high hydroconversion activity of n-octane, and the optimum operating parameters for the catalyst to produce high octane number products were: 400℃, 2.0MPa, VH2:Vn-octane= 400:1, liquid hourly space velocity LHSV=1.0h-1. Under the optimum reaction condition, the conversion efficiency, C5 liquid + product selectivity, isomerization and aromatization product selectivity were 69.80%, 56.95%, 79.73% and 1.29% respectively. The catalyst (S1) impregnated with Ni and W after the HSAPO-11 zeolite was combined with Al2O3 matrix, performed better than the catalyst (S2) impregnated with Ni and W before combining with the Al2O3 matrix.
基金Sponsored by the Tangshan Key Laboratory Project of New Technology in Biology and Chemistry(12150224B-2)Scientific Research Foundation Project of Tangshan Normal College(2013D02)
文摘B3LYP/6-31++G** method was applied to investigate the mechanism of alanine isomerization.12 minima and 22 transition states were obtained after optimization and several paths of isomerization were found.It is found that intramolecular single-bond rotation and proton transfer might lead to isomerization.The energy barrier of C–N bond rotation was lower than 2.52 kcal·mol 1,while the energy barrier ranges of the rotation of C–C and C–O were separately 0.43~ 7.01 and 4.69~12.19 kcal·mol 1,and the minimum energy barrier of proton transfer was 30.76 kcal·mol 1.The most probable isomerization path and mechanism for the two most stable conformations was discussed to find that the highest energy barrier to be crossed in this path was 11.87 kcal·mol 1.In order to understand the microscopic nature why only 4 conformations were detected in the experiment,thermodynamic properties of all conformations at the experimental temperature of 391 K was calculated.It is found that conformations XII,XI,X and IX can only unidirectionally convert into conformations rapidly with low energy and vanish immediately.The other conformations were distributed according to Maxwell-Boltzman's law,and the distribution probabilities of conformations I,II,III,IV,V,VI,VII and VIII were respectively 27.2%,26.5%,25.8%,6.4%,5.2%,4.8%,2.5% and 1.6%.Conformations I,II and III with bigger probability and stronger absorption peak were easy to detect in the experiment.Conformation IV had a relatively smaller probability(6.4%) and weak absorption peak which,however,could also be identified.The other conformations had too small probability to identify in the spectrum.
基金Supported by the National Natural Science Foundation of China(Nos.21072149, 20872108)
文摘Herein lies a convenient and highly efficient method of olefin isomerization in the presence of RuCl3?3H2O in ionic liquid(IL). More importantly, RuCl3?3H2O is a robust and recyclable catalyst. Nine cycles of RuCl3?3H2O as the catalyst were performed for the isomerization reactions of the selected substrate in IL and MeOH.
文摘The structure and mechanism of isomerization of CH3SB have been studied by using DFT method at the B3LYP/6-311G** level. The computational results reveal that the energy of singlet state of CH3SB is lower than that of triplet state, so the former should be the ground state. Two transition states of isomerization of singlet state of CH3SB have been determined at the B3L-YP/6- 311G** level, too. The methyl linked to sulfur atom is first transferring to the boron atom, to which the hydrogen atom of methyl is then transferring. According to the results of this paper, reaction paths of isomerizations of CH3SB are studied thoroughly with IRC method.
基金supported by the National Natural Science Foundation of China (No. 20973123)the National Basic Research Program of China (Grant No.2012CB215002)
文摘In this study,EU-1 zeolite was successfully synthesized via a quasi-solid state approach and assembled to catalyst for the C 8 aromatics isomerization process.The catalytic properties were tuned through careful modification of the acidity of EU-1 zeolites and metal-doping of the catalyst.It was shown that EU-1 was an excellent candidate for the C 8 aromatics isomerization process due to its unique structure.In addition,steam treatment of EU-1 at 450-500 ℃ could optimize the acidic properties of the catalyst,hence enhance its catalytic performance.The effect of the amount of Pt on ethylbenzene conversion was studied and the optimum amount was determined to be about 0.3-0.4 wt%.It was confirmed that EU-1 zeolite prepared via a quasi-solid state approach and then dealuminated by steam treatment had better activity and selectivity than conventional mordenite(MOR) zeolite and could be an excellent candidate for C 8 aromatics isomerization.