Influence of Tilted Angle on Effective Linear Energy Transfer in Single Event Effect Tests for Integrated Circuits at 130 nm Technology Node

A heavy-ion irradiation experiment is studied in digital storage cells with different design approaches in 130？nm CMOS bulk Si and silicon-on-insulator （SOI） technologies. The effectiveness of linear energy transfer （LET） with a tilted ion beam at the 130？nm technology node is obtained. Tests of tilted angles θ=0 ° , 30 ° and 60 ° with respect to the normal direction are performed under heavy-ion Kr with certain power whose LET is about 40？MeVcm 2 /mg at normal incidence. Error numbers in D flip-flop chains are used to determine their upset sensitivity at different incidence angles. It is indicated that the effective LETs for SOI and bulk Si are not exactly in inverse proportion to cosθ , furthermore the effective LET for SOI is more closely in inverse proportion to cosθ compared to bulk Si, which are also the well known behavior. It is interesting that, if we design the sample in the dual interlocked storage cell approach, the effective LET in bulk Si will look like inversely proportional to cosθ very well, which is also specifically explained.

Numerical Analysis of Magnetic-Shielding Effectiveness for Magnetic Resonant Wireless Power Transfer System

Magnetic radiation phenomena appear inevitably in the magnetic-resonance wireless power transfer （MR-WPT） system, and regarding this problem the magnetic-shielding scheme is applied to improve the electromagnetic performance in engineering. In this study, the shielding effectiveness of a two-coil MR-WPT system for different material shields is analyzed in theory using Moser＇s formula and Schelkunoff＇s formula. On this basis a candidate magnetic-shielding scheme with a double-layer structure is determined, which has better shielding effectiveness and coils coupling coefficient. Finally, some finite element simulation results validate the correctness of the theoretical analysis, and the shielding effectiveness with the double-layer shield in maximum is 30？dB larger than the one with the single-layer case.

Investigating short- and long-term transfer effects of a Taiji beginner course in participants' daily life

in recent years research investigating various health benefits of Taiji practice has markedly increased. Despite this growing scientific interest, essential questions such as to what extent a Taiji course may exert noticeable effects in participants＇ everyday life, what these effects are, and how and where potential transfer effects occur, have hardly been considered. The aim of our study was to explore transfer effects from a Taiji course into participants＇ daily lives. METHODS： We conducted a longitudinal observational study in 45 healthy participants at the end of their three-month Taiji beginner course （tpl） and at two months （tp2） as well as one year after course completion （tp3）. Participants were asked to report their Taiji practice behavior at all time points, as well as to rate and describe perceived transfer effects of Taiji course contents on their daily life at tpl and tp3. RESULTS： Transfer effects were reported by 91.1% of all respondents after course completion （tpl） and persisted in 73.3% at the one-year follow-up assessment （tp3）, counting ＂increase of self-efficacy＂, ＂improvement of stress management＂, and ＂increase of body awareness＂ as the most frequently mentioned effects. Transfer effects predominantly occurred in participants＇ work and social environments, as well as during everyday activities in public areas. While self- reliant Taiji practice frequency significantly decreased from 82.2% at tpl to 55.6% at tp3 （P 〈 0.001）, the magnitude of self-reported transfer effects did not （P = 0.35）. As explorative analyses revealed, regular Taiji course attendance was highly correlated with stronger transfer effects at tpl （r = 0.51; P 〈 0.001） and tp3 （r = 0.35; P = 0.020）. Participants reporting high self-reliant Taiji practice frequency at tp2 were likely to maintain a regular practice routine at tp3 （r = 0.42; P 〈 0.004）, whereas self-reliant practice frequency and transfer effects at tpl were positively correlated with self-reliant practice frequency at tp3 on a trend level （r 〈 0.27; P 〉 0.08）. CONCLUSION： Our data underline the importance of regular course participation for pronounced and long lasting transfer effects into participants＇ everyday life. We discuss that several context and process-related aspects of a Taiji intervention are potentially relevant factors for enhancement of transfer effect.

Effective thermal conductivity in granular media with devolatilization:the Lattice Boltzmann modelling

Flow thermomechanics in reactive porous media is of importance in industry including the thermal processing of fossil fuel(coking understood as a slow pyrolysis)involving devolatilisation.On the way to provide a detailed description of the process,a multi-scale approach was chosen to estimate effective transport coefficients.For this case the Lattice Boltzmann method(LBM)was used due to its advantages to accurately model multi-physics and chemistry in a random geometry of granular media.After account for earlier studies,the paper presents description of the model with improved boundary conditions and a benchmark case.Results from meso-scale LBM calculations are presented and discussed regarding the spatial resolution and the choice of relaxation parameter along its influence on the accuracy compared with empirical formulae.Regarding the estimation of effective thermal conductivity coefficient it is shown that occurrence of devolatilization has a crucial effect by reducing heat transfer.Some quantitative results characterise the propagation of thermal front;also presented is the evolution of effective thermal conductivity.The work is a step forward towards a physically sound simulation of thermal processing of fossil fuel.

THE EFFECT OF THE TRANSFER OF LAK CELLS, COMBINED WITH ALLOIMMUNIZATION, ON THE PULMONARY METASTASES OF RAT MAMMARY CARCINOMA

Alloimmunization was combined with lympho-kine activated killer (LAK) cells to assess its effect on mammary carcinoma in rats. The animals were injected with both irradiated allosplenocytes and syngeneic LAK cells. Metastatic lung nodules were markedly reduced using combined therapy when compared with the transfer of LAK cells or alloimmuni-zation alone. IL-2 activity in the serum of alloim-munized rats could be detected. This activity, maintained in vivo for one week, may be responsible for enhancing the antitumor effect of transferred LAK cells.

Delay Effect on Coherent Transfer of Optical Frequency Based on a Triple-Pass Scheme

We demonstrate a triple-pass scheme for coherent transfer of optical frequency and the delay effect on the fiber phase noise compensation. It is theoretically proved that the delay effect consists of both fiber delay and servo delay. The delay effect confines the servo bandwidth within 1/8 and induces a residual fiber phase noise after noise compensation. For a 25-km-long fiber, the servo bandwidth is found to be around 1 k Hz, and the fiber phase noise is suppressed approaching to the theoretical limitation. The triple-pass scheme enables the simultaneous transfer of optical frequency to multiple remote users. The performance of noise compensator in the triple-pass scheme can achieve a similar level result compared with that in the double-pass scheme.

Simulation and Experimental Design of Load Adaptive Braking System on Two Wheeler

The braking quality is considered the main execution of the adaptive control framework that impacts the vehicle safety and rides solace astoundingly notably the stopping distance.This research work aims to create a pattern and design of an electromechanically adjusted lever that multiplies the applied braking force depending on the inputs given by the sensors to reduce the stopping distance of the vehicle.It is carried out using two main parts of the two-wheeler vehicle:thefirst part deals with the detection of load acting on the vehicle and identifying the required braking force to be applied,and the second part deals with the micro-controller which activates the stepper motor for varying the mechanical leverage ratio from various loads on the vehicle using two actively movable wedges.The electromechanically operated variable braking force system is developed to actuate the braking system based on the load on the motorcycle.The MATLAB simulation and experimental work are carried out for various loading(driver and pillion)conditions on a two-wheeler.The results indicate that the proposed electronically operated braking system is more effective than the conventional braking system for various loads and vehicle speeds.Specifically,the stopping distance of the vehicle is decreased significantly by about 4.9%between the con-ventional braking system and the simulated proposed system.Further,the experi-mental results show that the stopping distance is condensed by about 4.1%.The validation between simulated and experimental results revealed a great deal with the least error percentage of about 0.8%.

A Novel Design and Fabrication of Magnetic Random Access Memory Based on Nano-ring-type Magnetic Tunnel Junctions

Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit： nm） were nano-fabricated on the Si（100）/SiO2 substrate using magnetron sputtering deposition combined with the optical lithography, electron beam lithography （EBL） and Ar ion-beam etching techniques. The smaller NR-MTJs with the inner- and outer-diameter of around 50 and 100 nm and also their corresponding NR-MTJ arrays were nano-patterned. The tunnelling magnetoresistance （TMR ＆ R） versus driving current （I） loops for a spin-polarized current switching were measured, and the TMR ratio of around 35% at room temperature were observed. The critical values of switching current for the free Co60Fe20B20 layer relative to the reference Co6oFe2oB2o layer between parallel and anti-parallel magnetization states were between 0.50 and 0.75 mA in such NR-MTJs. It is suggested that the applicable MRAM fabrication with the density and capacity higher than 256 Mbit/inch2 even 6 Gbite/inch2 are possible using both I NR-MTJ＋1 transistor structure and current switching mechanism based on based on our fabricated 4×4 MRAM demo devices.

Defect-rich Mg-Al MMOs supported TEPA with enhanced charge transfer for highly efficient and stable direct air capture

Due to the advantages of low energy consumption and high CO_(2) selectivity, the development of solid amine-based materials has been regarded as a hot research topic in the field of DAC for the past decades.The adsorption capacity and stability over multiple cycles have been the top priorities for evaluation of practical application value. Herein, we synthesized a novel DAC material by loading TEPA onto defect-rich Mg_(0.55)Al-O MMOs with enhanced charge transfer effect. The optimal Mg_(0.55)Al-O-TEPA67% demonstrates the highest CO_(2)uptake of(3.0 mmol g^(-1)) and excellent regenerability, maintaining ~90% of the initial adsorption amount after 80 adsorption/desorption cycles. The in situ DRIFTS experiments suggested the formation of bicarbonate species under wet conditions. DFT calculations indicated that the stronger bonding between Mg_(0.55)Al-O support and solid amine was caused by the abundance of oxygen defects on MMOs confirmed by XPS and ESR, which favors the charge transfer between the support and amine,resulting in intense interaction and excellent regenerability. This work for the first time conducted comprehensive and systematic investigation on the stabilization mechanism for MMOs supported solid amine adsorbents with highest uptake and superior cyclic stability in depth, which is different from the most popular SiO_(2)-support, thus providing facile strategy and comprehensive theoretical mechanism support for future research about DAC materials.

Perpendicular magnetic tunnel junction and its application in magnetic random access memory

Recent progresses in magnetic tunnel junctions with perpendicular magnetic anisotropy （PMA） are reviewed and summarized. At first, the concept and source of perpendicular magnetic anisotropy （PMA） are introduced. Next, a historical overview of PMA materials as magnetic electrodes, such as the RE-TM alloys TbFeCo and GdFeCo, novel tetragonal manganese alloys Mn-Ga, L10-ordered （Co, Fe）/Pt alloy, multilayer film [Co, Fe, CoFe/Pt, Pd, Ni, AU]N, and ultra-thin magnetic metal/oxidized barrier is offered. The other part of the article focuses on the optimization and fabrication of CoFeB/MgO/CoFeB p-MTJs, which is thought to have high potential to meet the main demands for non-volatile magnetic random access memory.

Theoretical Study on the Mass Transfer of Metal Ions in Ion Exchange Process

The kinetics of ion exchange between Ca2+, Mg2+, Co(Ⅱ), Cu(Ⅱ),Ni(Ⅱ), Fe(Ⅲ), y3+ or Sm3+ , respectively, in 0.50 mol/L HC1 and H+ on macrorecticular sulfonic ion exchange resin and the kinetics of the same reactions (M -H exchange) when Mn(Ⅱ) coexisted in resin phase as accelerating ion were studied. The accelerating effect manifested and its rule are consistent with the accelerating effect theory based on the concept concerned with adsorption electrical double layer which has been suggested in a previous paper published.

Ionic liquids in electrocatalysis

The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active sites but also by the properties of the interfacial structures at catalytic surfaces. Ionic liquids（ILs）, as a unique class of metal salts with melting point below 100 ℃, present themselves as ideal modulators for manipulations of the interfacial structures. Due to their excellent properties such as good chemical stability, high ionic conductivity, wide electrochemical windows and tunable solvent properties the performance of electrocatalysts can be substantially improved through ILs. In the current minireview, we highlight the critical role of the IL phase at the microenvironments created by the IL, the liquid electrolyte, catalytic nanoparticles and/or support materials, by detailing the promotional effect of IL in electrocatalysis as reaction media, binders, and surface modifiers. Updated exemplary applications of IL in electrocatalysis are given and moreover, the latest developments of IL modified electrocatalysts following the ＂Solid Catalyst with Ionic Liquid Layer（SCILL）＂ concept are presented.

THE EFEFCT OF MAGNETIC FIELD ON POLYMERIZATION OF STYRENE IN THE PRESENCE OF POLYVINYL NAPHTHALENE AND POLYVINYL BENZOPHENONE

In the process of bulk photopolymerization of styrene initiated by AIBN decomposition polyvinyl benzophenone (PVB) can supply an effective cage for triplet-triplet energy transfer between PVB macromolecules and small molecules of AIBN to influence the molecular weight of polystyrene in weak magnetic field (less than 0.035T), that was different from the case of polyvinyl naphthalene (PVN) which supplied cages for this system only in the stronger magnetic field (more than 0.2 T) studies. It was found that in the same conditions, PVN could exert more tremendous influences on the bulk photopolymerizatiou system of styrene than PVB because in the stronger magnetic field the triplet PVN had much longer life time than PVB.

Strain-induced ferroelectric phase transitions in incipient ferroelectric rutile TiO_2

Uniaxial strain induced ferroelectric phase transitions in rutile TiO2 are investigated by first-principles calculations. The calculated results show that the in-plane tensile strain induces rutile TiO2, paraelectric phase with P4-2/mnm （D4h） space group, to a ferroelectric phase with Pm（Cs） space group, driven by the softening behaviour of the Eul mode. In addition, the out-of-plane tensile strain, vertical to the ab plane, leads to a ferroelectric phase with P42nm （C4v） space group, driven by the softening behaviour of the A2u mode. The critical tensile strains are 3.7% in-plane and 4.0% out-of-plane, respectively. In addition, the in-plane compression strain, which has the same structure variation as out- of-plane tensile strain due to Poisson effect, leads the paraelectric rutile TiO2 to a paraelectric phase with Pnnm （D2h） space group driven by the softening behaviour of the B1g mode. These results indicate that the sequence ferroelectric （or paraelectric） phase depends on the strain applied. The origin of ferroelectric stabilization in rutile TiO2 is also discussed briefly in terms of strain induced Born effective charge transfer.

Heat transfer enhancement in MOSFET mounted on different FR4 substrates by thermal transient measurement

Miniaturization of electronic package leads to high heat density and heat accumulation in electronics device, resulting in short life time and premature failure of the device. Junction temperature and thermal resistance are the critical parameters that determine the thermal management and reliability in electronics cooling. Metal oxide field effect transistor（MOSFET）is an important semiconductor device for light emitting diode-integrated circuit（LED IC） driver application, and thermal management in MOSFET is a major challenge. In this study, investigations on thermal performance of MOSFET are performed for evaluating the junction temperature and thermal resistance. Suitable modifications in FR4 substrates are proposed by introducing thermal vias and copper layer coating to improve the thermal performance of MOSFET. Experiments are conducted using thermal transient tester（T3ster） at 2.0 A input current and ambient temperature varying from25℃ to 75℃. The thermal parameters are measured for three proposed designs： FR4 with circular thermal vias, FR4 with single strip of copper layer and embedded vias, and FR4 with I-shaped copper layer, and compared with that of plain FR4 substrate. From the experimental results, FR4I-shaped shows promising results by 33.71% reduction in junction temperature and 54.19% reduction in thermal resistance. For elevated temperature, the relative increases in junction temperature and thermal resistance are lower for FR4I-shaped than those for other substrates considered. The introduction of thermal vias and copper layer plays a significant role in thermal performance.

Solvent effects on oxygen atom transfer reaction between manganese(V)-oxo corrole and alkene

Pseudo-first order reaction rate constants of 5,10,15-tris（pentafluorophenyl）corrole Mn（V）-oxo （F_（15）CMn（V）-oxo）,5,15-bis（pentafluorophenyl）-10-（phenyl）corrole Mn（V）-oxo（F_（10）CMn（V）-oxo）,5,15- bis（phenyl）-10-（pentafluorophenyl）corrole Mn（V）-oxo（F_5CMn（V）-oxo） and 5,10,15-tris（phenyl）corrole Mn（V）-oxo（F_0CMn（V）-oxo） with a series of alkene substrates in different solvents were determined by UV-vis spectroscopy.The results indicated that the oxygen atom transfer pathway between Mn（V）-oxo corrole and alkene is solvent-dependent.

Imidacloprid-induced transference effect on some elements in rice plants and the brown planthopper Nilaparvata lugens （Hemiptera： Delphacidae）

The widespread use ofimidacloprid against insect pests has not only increased the rate of the development of target pest resistance but has also resulted in various negative effects on rice plants and Nilaparvata lugens resurgence. However, the effect of imidacloprid on elements in rice plants and the transference of these element changes between rice and N. lugens are currently poorly understood. The present study investigated changes ofCu, Fe, Mn, Zn, Ca, K, Mg and Na contents in rice plants following imidacloprid foliar sprays in the adult female ofN./ugens that develops from nymphs that feed on treated plants and honeydew produced by females. The results indicated that imidacloprid foliar spray significantly increased Fe and K contents in leaf sheaths. Generally, Fe, Mn, K and Na contents in leaf blades were noticeably decreased, but Ca contents in leaf blades for ! 0 and 30 mg/kg imidacloprid treatments were significantly increased. The contents of most elements except K and Mg in the adult females and honeydew were significantly elevated. Multivariate statistical analysis showed that Fe, Mn and Na in leaf blades and Fe and Mn in leaf sheaths could be proportionally transferred to N. lugens. The relationship between most elements in adult female bodies and in the honeydew showed a positive correlation coefficient. There were significant differences in the contents of some elements in rice plants and N. lugens from different regions.

A Mixed Wavelet-Learning Method of Predicting Macroscopic Effective Heat Transfer Conductivities of Braided Composite Materials

In this paper,a novel mixed wavelet-learning method is developed for predicting macroscopic effective heat transfer conductivities of braided composite materials with heterogeneous thermal conductivity.This innovative methodology integrates respective superiorities of multi-scale modeling,wavelet transform and neural networks together.By the aid of asymptotic homogenization method(AHM),off-line multi-scalemodeling is accomplished for establishing thematerial databasewith highdimensional and highly-complexmappings.Themulti-scalematerial database and the wavelet-learning strategy ease the on-line training of neural networks,and enable us to efficiently build relatively simple networks that have an essentially increasing capacity and resisting noise for approximating the high-complexity mappings.Moreover,it should be emphasized that the wavelet-learning strategy can not only extract essential data characteristics from the material database,but also achieve a tremendous reduction in input data of neural networks.The numerical experiments performed using multiple 3D braided composite models verify the excellent performance of the presentedmixed approach.The numerical results demonstrate that themixedwaveletlearningmethodology is a robustmethod for computing themacroscopic effective heat transfer conductivities with distinct heterogeneity patterns.The presentedmethod can enormously decrease the computational time,and can be further expanded into estimating macroscopic effective mechanical properties of braided composites.

High-power operation of double-pass pumped Nd:YVO4 thin disk laser

A simple,compact,double-pass pumped Nd:YVO4 thin disk laser is demonstrated.Its continuous-wave performance with different Nd doping concentrations and thicknesses is investigated experimentally.The maximum output power of 17.7 W is achieved by employing a 0.5 at.%doped sample,corresponding to an optical-to-optical efficiency of 46% with respect to the absorbed pump power.In addition,a numerical analysis and an experimental study of the temperature distribution,and thermal lens effect of the Nd:YVO4 thin disk,are presented considering the influence of the energy transfer upconversion effect and the temperature dependence of the thermal conductivity tensor.The simulated results are in good agreement with the experimental results.