Transient Stability Preventive Control of Wind Farm Connected Power System Considering the Uncertainty

To address uncertainty as well as transient stability constraints simultaneously in the preventive control of windfarm systems, a novel three-stage optimization strategy is established in this paper. In the first stage, the probabilisticmulti-objective particle swarm optimization based on the point estimate method is employed to cope with thestochastic factors. The transient security region of the system is accurately ensured by the interior point methodin the second stage. Finally, the verification of the final optimal objectives and satisfied constraints are enforcedin the last stage. Furthermore, the proposed strategy is a general framework that can combine other optimizationalgorithms. The proposed methodology is tested on the modified WSCC 9-bus system and the New England 39-bussystem. The results verify the feasibility of the method.

An extrapolation approach for aeroengine's transient control law design

Transient control law ensures that the aeroengine transits to the command operating state rapidly and reliably. Most of the existing approaches for transient control law design have complicated principle and arithmetic. As a result, those approaches are not convenient for application. This paper proposes an extrapolation approach based on the set-point parameters to construct the transient control law, which has a good practicability. In this approach, the transient main fuel control law for acceleration and deceleration process is designed based on the main fuel flow on steady operating state. In order to analyze the designing feature of the extrapolation approach, the simulation results of several different transient control laws designed by the same approach are compared together. The analysis indicates that the aeroengine has a good performance in the transient process and the designing feature of the extrapolation approach conforms to the elements of the turbofan aeroengine.

Economic MPC-based transient control for a dual-mode power-split HEV

The existing research into hybrid electric vehicle(HEV) control is mainly focussed on the optimisation of the power distribution between a conventional internal combustion engine(ICE) and an alternative power source(usually a battery pack), however,transient control, which is a key technique that affects both fuel economy and the drivability of the HEV, has not been fully addressed. Especially in dual-mode power-split HE Vs, due to the different dynamic characteristics of the actuators in the transmission, and its complicated speed-torque relationship, transient control also affects the precision of power distribution and the speed of response of the electric output power. To improve the transient control performance, the design of an economic model predictive control(EMPC)-based transient controller for a dual-mode power-split HEV is developed. By incorporating an experimental identification model of a diesel ICE in a control-oriented transmission model, a better coordination among the actuators involved in HEV transmission can be achieved. Moreover, an ICE efficiency index is also added to the objective function to improve ICE fuel efficiency during this transient process. Then, a fast MPC method is applied to reduce the on-line computation effort required of the proposed control algorithm. By the flexible application of the EMPC and an innovative ICE model which is suited to the control-oriented model in EMPC, the transient control performance was improved. The effectiveness,and the real-time performance,of the control algorithm are validated by way of MATLABTM/Simulink-based simulations,as well as test-bed experiments combined with the use of the RapidECU platform.

Simplified Fast Transient Control in Coolerless Pump EDFA for Metro Applications

A novel optical transient suppression technique to dramatically reduce gain variation of EDFA with un-cooled pump is demonstrated experimentally, showing excellent performance of 50us transient time with no more than 0.5dB excursion and 0.25dB offset.

Transient elastography(Fibro Scan~?) with controlled attenuation parameter in the assessment of liver steatosis and fibrosis in patients with nonalcoholic fatty liver disease- Where do we stand?

Non-alcoholic fatty liver disease(NAFLD) is the most common cause of chronic liver disease worldwide. Currently, the routinely used modalities are unable to adequately determine the levels of steatosis and fibrosis(laboratory tests and ultrasonography) or cannot be applied as a screening procedure(liver biopsy). Among the non-invasive tests, transient elastography(Fibro Scan?, TE) with controlled attenuation parameter(CAP) has demonstrated good accuracy in quantifying the levels of liver steatosis and fibrosis in patients with NAFLD, the factors associated with the diagnosis and NAFLD progression. The method is fast, reliable and reproducible, with good intra- and interobserver levels of agreement, thus allowing for population-wide screening and disease follow-up. The initial inability of the procedure to accurately determine fibrosis and steatosis in obese patients has been addressed with the development of the obese-specific XL probe. TE with CAP is a viable alternative to ultrasonography, both as an initial assessment and during follow-up of patients with NAFLD. Its ability to exclude patients with advanced fibrosis may be used to identify low-risk NAFLD patients in whom liver biopsy is not needed, therefore reducing the risk of complications and the financial costs.

TRANSIENT RESPONSE OF A VALVE CONTROL HYDRAULIC SYSTEM WITHLONG PIPES

The simulation model of a valve control hydraulic system with long pipe isestablished in Simulink4.0, and then the step responses of the systems with difference pipeparameters are investigated by simulation. Simulation results show that the long pipes will slowdown the step response of system and make it fluctuate periodically. The results of simulationconform to the results of experiment on the whole, which proves the mathematic model is correct.

Phase Control of Transient Optical Properties of Double Coupled Quantum-Dot Nanostructure via Gaussian Laser Beams

We theoretically analyze the transient properties of a probe field absorption and dispersion in a coupled semiconductor double-quantum-dot nanostructure.We show that in the presence of the Gaussian laser beams,absorption and dispersion of the probe field can be dramatically influenced by the relative phase between applied fields and intensity of the Gaussian laser beams.Transient and steady-state behaviors of the probe field absorption and dispersion are discussed to estimate the required switching time.The estimated range is between 5-8 ps for subluminal to superluminal light propagation.

SUPPRESSION OF TRANSIENT RESPONSE OF A ROTOR IN ACTIVE VIBRATlON CONTROL

Transient response and its influence factors are investigated and a methodfor attenuating the transient response is developed by means of a time varying model.The system gain matrix is obtained by choosing weighting matrices and solving the timevarying Riccati equation. Control forces are applied to the system via a feed back loop.Comparisons of responses with and without control are made. The results show that thetransienl and steady state responses are significantly suppressed in the close loop systemand control forces are very small.

A novel transient rotor current control scheme of a doubly-fed induction generator equipped with superconducting magnetic energy storage for voltage and frequency support

A novel transient rotor current control scheme is proposed in this paper for a doubly-fed induction generator（DFIG）equipped with a superconducting magnetic energy storage（SMES） device to enhance its transient voltage and frequency support capacity during grid faults. The SMES connected to the DC-link capacitor of the DFIG is controlled to regulate the transient dc-link voltage so that the whole capacity of the grid side converter（GSC） is dedicated to injecting reactive power to the grid for the transient voltage support. However, the rotor-side converter（RSC） has different control tasks for different periods of the grid fault. Firstly, for Period I, the RSC injects the demagnetizing current to ensure the controllability of the rotor voltage. Then, since the dc stator flux degenerates rapidly in Period II, the required demagnetizing current is low in Period II and the RSC uses the spare capacity to additionally generate the reactive（priority） and active current so that the transient voltage capability is corroborated and the DFIG also positively responds to the system frequency dynamic at the earliest time. Finally, a small amount of demagnetizing current is provided after the fault clearance. Most of the RSC capacity is used to inject the active current to further support the frequency recovery of the system. Simulations are carried out on a simple power system with a wind farm. Comparisons with other commonly used control methods are performed to validate the proposed control method.

High-Accuracy Pneumatic Position Control by Applying Nonlinear Control and Arranging Transient Process

By applying a nonlinear control and arranging a transient process, the initiative error of the pneumatic servo positioning system is reduced largely, and a larger gain of the controller is used to improve the responding speed of the system at the same damping ratio. Therefore, a compromise is made among the responding speed, overshoot, robustness, adaptability and stability. In addition, a dynamic output feedback controller, including position velocity and acceleration （PVA） feedback, is designed to improve the performance of the system. And a nonlinear controller is reconstructed based on the linear output feedback controller to decrease noises and disturbances. The dynamic responses of the system are simulated and tested. Results show that the error is kept within 0.02 mm under different mass loads and the positioning transient process is smooth, without overshoot and speedy.

求解Controlling-UEP新方法的研究

提出一种将Brown算法与重新选择参考点的策略相结合求解电力系统暂态稳定性直接法 分析中主导不稳定平衡点(Controlling-UEP)的新方法。Brown算法相似于高斯消元法的牛顿类 算法,它把每一方程展成泰勒级数,所得到的最新信息(关于变量的最新解)立刻用于下一函数的构 造及求解,是求解病态方程组的好算法。文中将它与参考点的重新选择策略相结合,进一步提高它 求取病态情况下Controlling-UEP的稳定性。算例表明,所提出的新方法在收敛性和计算效率方 面有较好的效果。

NONLINEAR TRANSIENT RESPONSE OF STAY CABLE WITH VISCOELASTICITY DAMPER IN CABLE-STAYED BRIDGE

Taking the bending stiffness, static sag, and geometric non-linearity into consideration, the space nonlinear vibration partial differential equations were derived. The partical differential equations were discretized in space by finite center difference approximation, then the nonlinear ordinal differential equations were obtained. A hybrid method involving the combination of the Newmark method and the pseudo-force strategy was proposed to analyze the nonlinear transient response of the inclined cable-dampers system subjected to arbitrary dynamic loading. As an example, two typical stay cables were calculated by the present method. The results reveal both the validity and the deficiency of the viscoelasticity damper for vibration control of stay cables. The efficiency and accuracy of the proposed method is also verified by comparing the results with those obtained by using Runge-Kutta direct integration technique. A new time history analysis method is provided for the research on the stay cable vibration control.

Diagnostic value of controlled attenuation parameter for liver steatosis in patients with chronic hepatitis B

AIM: To study the diagnostic value of controlled attenuation parameter (CAP), evaluated by transient elastography, for liver steatosis in patients with chronic hepatitis B (CHB).

NONLINEAR TRANSIENT RESPONSE OF STAY CABLE WITH VISCOELASTICITY DAMPER IN CABLE-STAYED BRIDGE

Taking the bending stiffness, static sag, and geometric non-linearity into consideration, the space nonlinear vibration partial differential equations were derived. The partical differential equations were discretized in space by finite center difference approximation, then the nonlinear ordinal differential equations were obtained. A hybrid method involving the combination of the Newmark method and the pseudo-force strategy was proposed to analyze the nonlinear transient response of the inclined cable-dampers system subjected to arbitrary dynamic loading. As an example, two typical stay cables were calculated by the present method. The results reveal both the validity and the deficiency of the viscoelasticity damper for vibration control of stay cables. The efficiency and accuracy of the proposed method is also verified by comparing the results with those obtained by using Runge-Kutta direct integration technique. A new time history analysis method is provided for the research on the stay cable vibration control.

Generation of transient chaos from two-dimensional systems via a switching approach

A new approach of generating transient chaos from two-dimensional（2D） continuous autonomous systems within finite time is presented.Based on an absolute-value switching law,the phenomenon of transient chaos takes place by switching between three 2D systems.Basic dynamic behavior of the systems is investigated.Numerical examples illustrate the validity of the results.

Water hammer prediction and control:the Green's function method

By Green＇s function method we show that the water hammer （WH） can be analytically predicted for both laminar and turbulent flows （for the latter, with an eddy vis- cosity depending solely on the space coordinates）, and thus its hazardous effect can be rationally controlled and mini- mized. To this end, we generalize a laminar water hammer equation of Wang et al. （J. Hydrodynamics, B2, 51, 1995） to include arbitrary initial condition and variable viscosity, and obtain its solution by Green＇s function method. The pre- dicted characteristic WH behaviors by the solutions are in excellent agreement with both direct numerical simulation of the original governing equations and, by adjusting the eddy viscosity coefficient, experimentally measured turbulent flow data. Optimal WH control principle is thereby constructed and demonstrated.

Executive function during transient ischemic attacks

BACKGROUND： Recent researches demonstrate that damage of executive function is an early manifestation of vascular cognitive disorder. OBJECTIVE： To investigate the executive functions of patients with transient ischemic attack （TIA）. DESIGN： Case control. SETTING： Department of Neurology, the First Affiliated Hospital of Xinxiang Medical College. PARTICIPANTS： A total of 83 TIA patients （46 males and 37 females, aged 32 - 74 years） were selected from Department of Neurology, the First Affiliated Hospital of Xinxiang Medical College from July 2005 to December 2006. The diagnosis of TIA was established by the criteria of cerebrovascular diseases made by the Fourth National Cerebrovascular Disease Meeting. In these cases, forty-five patients （54%） were involved in internal carotid artery, and thirty-eight patients （46%） were involved in vertebral basilar system. Fifty healthy adults （Control group： 28 males and 22 females, aged 32 - 74 years） were chosen from retiree in community and family of patients. All of them were right-handedness, without cerebrovascular disease, cerebral trauma, inborn oligophrenia, and heating and visual disorders; also they had no anxiety and depression nearly one week. In addition, all the subjects cooperated with examination. METHODS： After TIA diagnosis, all patients received neuropsychological examination, including attention and inhibition, working memory, flexibility, planning and diversion, based on Stroop tests （C and CW） and the Wisconsin card sorting tests （WCST）. ① WCST test： The edition revised by Nelson was used. We would take the times of sorting, incorrect response, persistent incorrect response, and randomly incorrect response as the index of evaluation.② Stroop tests： The edition revised by Trenarry was used and this test had two types： form color and form color-word. Their incorrect response and response time were recorded for data analysis in the end. MAIN OUTCOME MEASURES： Results of WCST test and Stroop tests. RESULTS： A total of 83 TIA patients and 50 healthy subjects were involved in the final analysis. Items of Stroop tests, including response time of Stroop-C test, incorrect response of Stroop-C test, response time of Stroop-CW test and incorrect response of Stroop-CW test, and items of WCST, including incorrect response, persistent incorrect response and random incorrect response, between internal carotid artery system and vertebral basilar artery system were （93.87±24.39） s, 3.16±3.97, （228.46±68.13） s, 12.91 ± 10.56, 55.42± 20.38, 26.58± 10.41, 28.62±11.22; （96.76±24.75） s, 3.89±4.77, （223.46±72.54） s, 18.71 ± 13.80, 52.47 ±22.25, 28.82± 16.20, 23.39±9.72, respectively; this was higher than those in the control group [（52.10± 12.18） s, 1.68± 1.97, （134.86±34.15） s, 4.22±4.21, 32.46± 17.97, 14.42±8.47, 18.24± 10.24, P 〈 0.05 - 0.01]. Times of sorting of WCST between internal carotid artery system and vertebral basilar artery system were obviously lower than those in the control group （8.27±2.73, 8.66±2.77, 11.22±2.41, P 〈 0.01）. However, there were no significant differences between internal carotid artery system and vertebral basilar artery system （P 〉 0.05）. CONCLUSION： Patients with TIA have executive dysfunctions, and the dysfunctions have no difference between internal carotid artery system and vertebral basilar artery system.

Temperature inferential control of a reactive distillation column with double reactive sections

Temperature inferential control (TIC) is studied for a reactive distillation column with double reactive sections (RDC-DRSs) processing a hypothetical two-stage consecutive reversible reaction (A + B■C + D, C + B■E + D with αD > αB > αC > αA > αE). Because of the complicated dynamic behaviors, the controlled stages by sensitivity analysis lead to great steady-state deviations (SSDs) in top and bottom product purities. Since TIC involves considerably reduced settling times in comparison with direct composition control, small SSDs in product qualities correspond generally to small transient deviations (TDs) in product qualities. An objective function that measures SSDs in product qualities is formulated to represent the performance of a TIC system and an iterative procedure is devised to search for the best control configuration. The application of the procedure to the RDC-DRS gives considerably suppressed TDs and SSDs in top and bottom product qualities as compared with the one by sensitivity analysis. The method is simpler in principle and less computationally intensive than the current practice. These striking outcomes show the effectiveness of the proposed principle for the development of TIC systems for complicated reactive distillation columns.

超声瞬时弹性成像检测受控衰减参数评估非酒精性脂肪性肝病患者肝脂肪变程度价值研究

目的分析应用超声瞬时弹性成像检测的受控衰减参数(CAP)评估非酒精性脂肪性肝病(NAFLD)患者肝脂肪变程度的价值。方法2020年5月~2022年5月我院诊治的NAFLD患者78例,均接受肝脏超声检查和超声瞬时弹性成像检查,绘制受试者工作特征曲线(ROC)并计算曲线下面积(AUC)评估CAP诊断NAFLD患者肝脂肪变程度的效能。结果肝脏超声检查结果显示,78例NAFLD患者中包括轻度肝脂肪变41例、中度肝脂肪变23例和重度肝脂肪变14例;重度肝脂肪变患者血清ALT和AST水平分别为(77.2±14.9)U/L和(59.1±11.7)U/L,显著高于中度肝脂肪变患者【分别为(40.1±8.3)U/L和(35.9±6.2)U/L,P<0.05】或轻度肝脂肪变患者【分别为(26.7±5.5)U/L和(23.3±4.8)U/L,P<0.05】;重度肝脂肪变患者血清TG水平和CAP分别为(3.5±0.7)mmol/L和(317.7±27.6)dB/m,显著高于轻度肝脂肪变患者【分别为(1.6±0.6)mmol/L和(259.9±27.5)dB/m,P<0.05】或中度肝脂肪变患者【分别为(2.7±0.6)mmol/L和(292.1±30.7)dB/m,P<0.05】,而血清HDL-C水平为(0.8±0.4)mmol/L,显著低于轻度肝脂肪变患者【(1.3±0.3)mmol/L,P<0.05】或中度肝脂肪变患者【(1.1±0.3)mmol/L,P<0.05】;以CAP>285.4dB/m为截断点,诊断NAFLD患者中度肝脂肪变,以CAP>309.1dB/m为截断点,诊断NAFLD患者重度肝脂肪变,结果发现轻度肝脂肪变39例,中度肝脂肪变22例,重度肝脂肪变17例,其AUC、敏感度和特异度分别为0.783(95%CI:0.669~0.896)、78.3%和75.6%,和0.696(95%CI:0.515~0.876)、78.6%和69.6%(P<0.05)。结论应用CAP诊断NAFLD患者肝脂肪变程度可能比超声检查更准确,有很大的临床应用价值。

Transient Studies of Ghana Research Reactor-1 after Nineteen (19) Years of Operation Using PARET/ANL Code

The Program for the Analysis of Reactor Transients/Argonne National Laboratory (PARET/ANL) code was used to predict the thermal hydraulic behaviour of the Ghana Research Reactor-1 after adding 9.0 mm of beryllium to the top shim tray of the core. The core was analysed for reactivity insertions 2.1 mk, 3.0 mk, 4.0 mk, 5.0 mk and 6.7 mk, respectively. The reactor is still safe to operate in the range 2.1 mk to 4.0 mk. However, 2.1 mk would be ideal since the reactor automatic shutdown (SCRAM) is set not to exceed 120% of reactor nominal power.