Rate transient analysis methods for water-producing gas wells in tight reservoirs with mobile water

Tight gas reservoirs with mobile water exhibit multi-phase flow and high stress sensitivity.Accurately analyzing the reservoir and well parameters using conventional single-phase rate transient analysis methods proves challenging.This study introduces novel rate transient analysis methods incorporating evaluation processes based on the conventional flowing material balance method and the Blasingame type-curve method to examine fractured gas wells producing water.By positing a gas-water two-phase equivalent homogenous phase that considers characteristics of mobile water,gas,and high stress sensitivity,the conventional single-phase rate transient analysis methods can be applied by integrating the phase's characteristics and defining the phase's normalized parameters and material balance pseudotime.The rate transient analysis methods based on the equivalent homogenous phase can be used to quantitatively assess the parameters of wells and gas reservoirs,such as original gas-in-place,fracture half-length,reservoir permeability,and well drainage radius.This facilitates the analysis of production dynamics of fractured wells and well-controlled areas,subsequently aiding in locating residual gas and guiding the configuration of well patterns.The specific evaluation processes are detailed.Additionally,a numerical simulation mechanism model was constructed to verify the reliability of the developed methods.The methods introduced have been successfully implemented in field water-producing gas wells within tight gas reservoirs containing mobile water.

Numerical analysis of multicomponent responses of surface-hole transient electromagnetic method

We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular local targets. We also propose a calculation and analysis scheme based on numerical simulations of the subsurface transient electromagnetic fields. In the modeling of the electromagnetic fields, the forward modeling simulations are performed by using the finite-difference time-domain method and the discrete image method, which combines the Gaver–Stehfest inverse Laplace transform with the Prony method to solve the initial electromagnetic fields. The precision in the iterative computations is ensured by using the transmission boundary conditions. For the response analysis, we customize geoelectric models consisting of near-borehole targets and conductive wall rocks and implement forward modeling simulations. The observed electric fields are converted into induced electromotive force responses using multicomponent observation devices. By comparing the transient electric fields and multicomponent responses under different conditions, we suggest that the multicomponent-induced electromotive force responses are related to the horizontal and vertical gradient variations of the transient electric field at different times. The characteristics of the response are determined by the varying the subsurface transient electromagnetic fields, i.e., diffusion, attenuation and distortion, under different conditions as well as the electromagnetic fields at the observation positions. The calculation and analysis scheme of the response consider the surrounding rocks and the anomalous field of the local targets. It therefore can account for the geological data better than conventional transient field response analysis of local targets.

Identification of an Aux/IAA regulator for flesh firmness using combined GWAS and bulked segregant RNA-Seq analysis in watermelon

Watermelon is a highly cultivated fruit crop renowned for its quality properties of fruit flesh.Among various quality factors,fruit flesh firmness is a crucial quality parameter influencing the fruit texture,shelf life and its commercial value.The auxin/indole-3-acetic acid(Aux/IAA)plays a significant role in fruit development and ripening of non-climacteric fruits.However,the regulatory mechanism of Aux/IAA in controlling fruit flesh firmness and ripening in watermelon remains unknown.In this study,we employed an integrative approach combining genome-wide association study(GWAS)and bulked segregant RNA-Seq analysis(BSR-Seq)to identify an overlapping candidate region between 12776310 and 12968331 bp on chromosome 6,underlying an auxin-responsive gene(Aux/IAA)associated with flesh firmness in watermelon.Transcriptome analysis,followed by real-time quantitative reverse transcription PCR(qRT-PCR),confirmed that the expression of Aux/IAA was consistently higher in fruits with high flesh firmness.The sequence alignment revealed a single base mutation in the coding region of Aux/IAA.Furthermore,the concomitant Kompetitive/Competitive allele-specific PCR(KASP)genotyping data sets for F2 population and germplasm accessions identified Aux/IAA as a strong candidate gene associated with flesh firmness.Aux/IAA was enriched in the plant hormone signal transduction pathway,involving cell enlargement and leading to low flesh firmness.We determined the higher accumulation of abscisic acid(ABA)in fruits with low flesh firmness than hard flesh.Moreover,overexpression of Aux/IAA induced higher flesh firmness with an increased number of fruit flesh cells while reducing ABA content and flesh cell sizes.Additionally,the allelic variation in Aux/IAA for soft flesh firmness was found to exist in Citrullus mucosospermus and gradually fixed into Citrullus lanatus during domestication,indicating that soft flesh firmness was a domesticated trait.These findings significantly enhanced our understanding of watermelon fruit flesh firmness and consequently the watermelon fruit quality.

Transient analysis of 1D inhomogeneous media by dynamic inhomogeneous finite element method

The dynamic inhomogeneous finite element method is studied for use in the transient analysis of one dimensional inhomogeneous media. The general formula of the inhomogeneous consistent mass matrix is established based on the shape function. In order to research the advantages of this method, it is compared with the general finite element method. A linear bar element is chosen for the discretization tests of material parameters with two fictitious distributions. And, a numerical example is solved to observe the differences in the results between these two methods. Some characteristics of the dynamic inhomogeneous finite element method that demonstrate its advantages are obtained through comparison with the general finite element method. It is found that the method can be used to solve elastic wave motion problems with a large element scale and a large number of iteration steps.

Transient Temperature Analysis for Industrial AC Arc Furnace Bottom

Heat losses from the furnaces depend on the design and size. The surface heat loss from the bottom of an industrial AC electric arc furnace (EAF) possesses an important fraction of overall losses. So in this study the transient temperature variation at the bottom of the EAF was investigated. The transient temperature analysis was carried out using MATLAB computer program. T=T(r, t) for different bottom lining layers was depicted.

Transient thermal analysis as measurement method for IC package structural integrity

Practices of IC package reliability testing are reviewed briefly, and the application of transient thermal analysis is examined in great depth. For the design of light sources based on light emitting diode （LED） efficient and accurate reliability testing is required to realize the potential lifetimes of 105 h. Transient thermal analysis is a standard method to determine the transient thermal impedance of semiconductor devices, e.g. power electronics and LEDs. The temperature of the semiconductor junctions is assessed by time-resolved measurement of their forward voltage （Vf）. The thermal path in the IC package is resolved by the transient technique in the time domain. This enables analyzing the structural integrity of the semiconductor package. However, to evaluate thermal resistance, one must also measure the dissipated energy of the device （i.e., the thermal load） and the k-factor. This is time consuming, and measurement errors reduce the accuracy. To overcome these limitations, an innovative approach, the relative thermal resistance method, was developed to reduce the measurement effort, increase accuracy and enable automatic data evaluation. This new way of evaluating data simplifies the thermal transient analysis by eliminating measurement of the k-factor and thermal load, i.e. measurement of the lumen flux for LEDs, by normalizing the transient Vf data. This is especially advantageous for reliability testing where changes in the thermal path, like cracks and delaminations, can be determined without measuring the k-factor and thermal load. Different failure modes can be separated in the time domain. The sensitivity of the method is demonstrated by its application to high- power white InGaN LEDs. For detailed analysis and identification of the failure mode of the LED packages, the transient signals are simulated by time-resolved finite element （FE） simulations. Using the new approach, the transient thermal analysis is enhanced to a powerful tool for reliability investigation of semiconductor packages in accelerated lifetime tests and for inline inspection. This enables automatic data analysis of the transient thermal data required for processing a large amount of data in production and reliability testing. Based on the method, the integrity of LED packages can be tested by inline, outgoing inspection and the lifetime prediction of the products is improved.

Preliminary safety analysis for heavy water-moderated molten salt reactor

The heavy water-moderated molten salt reactor(HWMSR)is a newly proposed reactor concept,in which heavy water is adopted as the moderator and molten salt dissolved with fissile and fertile elements is used as the fuel.Issues arising from graphite in traditional molten salt reactors,including the positive temperature coefficient and management of highly radio-active spent graphite waste,can be addressed using the HWMSR.Until now,research on the HWMSR has been centered on the core design and nuclear fuel cycle to explore the viability of the HWMSR and its advantages in fuel utilization.However,the core safety of the HWMSR has not been extensively studied.Therefore,we evaluate typical accidents in a small modular HWMSR,including fuel salt inlet temperature overcooling and overheating accidents,fuel salt inlet flow rate decrease,heavy water inlet temperature overcooling accidents,and heavy water inlet mass flow rate decrease accidents,based on a neutronics and thermal-hydraulics coupled code.The results demonstrated that the core maintained safety during the investigated accidents.

Transient analysis and optimization of passive residual heat removal heat exchanger in advanced nuclear power plant

The transient performance and optimization of a passive residual heat removal heat exchanger(PRHR HX)were investigated.First,a calculation method was developed for predicting the heat transfer of the PRHR HX.The calculation results were validated through comparisons with ROSA experimental data.The heat-transfer performance of the AP1000 PRHR HX in the initial period was predicted,and it satisfied the design requirements.Second,the distributions of the heat flux,tube-inside/outside heattransfer coefficients,and heat load for the AP1000 PRHR HX over 2000 s were examined.Third,an optimization study was conducted by adjusting the horizontal length and tube diameter.Their effects on the four main heat-transfer parameters and the heat-transfer area were analyzed.Furthermore,the influence of the initial in-containment refueling water storage tank(IRWST)temperature was investigated using an established simulation procedure.The results indicated that it significantly affected the trends of the IRWST temperature and reactor outlet temperature.Finally,the minimum required flow rates over time to maintain the reactor outlet temperature at the safety line were determined for different start-up times.The trends of the minimum required flow rate and the peak flow rate were analyzed.

Well interference evaluation considering complex fracture networks through pressure and rate transient analysis in unconventional reservoirs

Severe well interference through complex fracture networks(CFNs)can be observed among multi-well pads in low permeability reservoirs.The well interference analysis between multi-fractured horizontal wells(MFHWs)is vitally important for reservoir effective development.Well interference has been historically investigated by pressure transient analysis,while it has shown that rate transient analysis has great potential in well interference diagnosis.However,the impact of complex fracture networks(CFNs)on rate transient behavior of parent well and child well in unconventional reservoirs is still not clear.To further investigate,this paper develops an integrated approach combining pressure and rate transient analysis for well interference diagnosis considering CFNs.To perform multi-well simulation considering CFNs,non-intrusive embedded discrete fracture model approach was applied for coupling fracture with reservoir models.The impact of CFN including natural fractures and frac-hits on pressure and rate transient behavior in multi-well system was investigated.On a logelog plot,interference flow and compound linear flow are two new flow regimes caused by nearby producers.When both NFs and frac-hits are present in the reservoir,frac-hits have a greater impact on well#1 which contains frac-hits,and NFs have greater impact on well#3 which does not have frac-hits.For all well producing circumstances,it might be challenging to see divergence during pseudosteady state flow brought on by frac-hits on the logelog plot.Besides,when NFs occur,reservoir depletion becomes noticeable in comparison to frac-hits in pressure distribution.Application of this integrated approach demonstrates that it works well to characterize the well interference among different multi-fractured horizontal wells in a well pad.Better reservoir evaluation can be acquired based on the new features observed in the novel model,demonstrating the practicability of the proposed approach.The findings of this study can help for better evaluating well interference degree in multi-well systems combing PTA and RTA,which can reduce the uncertainty and improve the accuracy of the well interference analysis based on both field pressure and rate data.

Transient thermo-mechanical analysis for bimorph soft robot based on thermally responsive liquid crystal elastomers

Thermally responsive liquid crystal elastomers (LCEs) hold great promise in applications of soft robots and actuators because of the induced size and shape change with temperature. Experiments have successfully demonstrated that the LCE based bimorphs can be effective soft robots once integrated with soft sensors and thermal actuators. Here, we present an analytical transient thermo-mechanical model for a bimorph structure based soft robot, which consists of a strip of LCE and a thermal inert polymer actuated by an ultra-thin stretchable open-mesh shaped heater to mimic the unique locomotion behaviors of an inchworm. The coupled mechanical and thermal analysis based on the thermo-mechanical theory is carried out to underpin the transient bending behavior, and a systematic understanding is therefore achieved. The key analytical results reveal that the thickness and the modulus ratio of the LCE and the inert polymer layer dominate the transient bending deformation. The analytical results will not only render fundamental understanding of the actuation of bimorph structures, but also facilitate the rational design of soft robotics.

A review of pressure transient analysis in reservoirs with natural fractures,vugs and/or caves

A review of the pressure transient analysis of flow in reservoirs having natural fractures,vugs and/or caves is presented to provide an insight into how much knowledge has been acquired about this phenomenon and to highlight the gaps still open for further research.A comparison-based approach is adopted which involved the review of works by several authors and identifying the limiting assumptions,model restrictions and applicability.Pressure transient analysis provides information to aid the identification of important features of reservoirs.It also provides an explanation to complex reservoir pressuredependent variations which have led to improved understanding and optimization of the reservoir dynamics.Pressure transient analysis techniques,however,have limitations as not all its models find application in naturally fractured and vuggy reservoirs as the flow dynamics differ considerably.Pollard’s model presented in 1953 provided the foundation for existing pressure transient analysis in these types of reservoirs,and since then,several authors have modified this basic model and come up with more accurate models to characterize the dynamic pressure behavior in reservoirs with natural fractures,vugs and/or caves,with most having inherent limitations.This paper summarizes what has been done,what knowledge is considered established and the gaps left to be researched on.

NEW PERTURBATION TECHNIQUE FOR TRANSIENT ANALYSIS AND ITS APPLICATIONS IN DC-DC PWM SWITCHING POWER CONVERTERS

An improved perturbation technique proposed in a recent paper (Int. J. Electronics, vol. 63, pp.403-414) has been successfully applied to steady-state analysis of PWM switching converters. This paper extends the algorithm to transient analysis of a broader class of non-linear systems. As an example, the transient response of a Boost PWM switching converter is analyzed to demonstrate its simplicity and accuracy.

Transient Stability Analysis of Power System Based on an Improved Neural Network

A new type of ANN (Artificial Neural Network) structure is introduced, and a nonlinear transformation of the original features is proposed so as to improve the learning covergence of the neural network. This kind of improved ANN is then used to analyse the transient stability of two real power systems. The results show that this method possesses better effectiveness and high convergence speed.

Short-duration transient visual evoked potentials and color reflectivity discretization analysis in glaucoma patients and suspects

AIM： To evaluate the use of short-duration transient visual evoked potentials（VEP） and color reflectivity discretization analysis（CORDA） in glaucomatous eyes,eyes suspected of having glaucoma,and healthy eyes.METHODS： The study included 136 eyes from 136 subjects： 49 eyes with glaucoma,45 glaucoma suspect eyes,and 42 healthy eyes.Subjects underwent Humphrey visual field（VF） testing,VEP testing,as well as peripapillary retinal nerve fiber layer optical coherence tomography imaging studies with post-acquisition CORDA applied.Statistical analysis was performed using means and ranges,ANOVA,post-hoc comparisons using Turkey＇s adjustment,Fisher＇s Exact test,area under the curve,and Spearman correlation coefficients.RESULTS： Parameters from VEP and CORDA correlated significantly with VF mean deviation（MD）（P〈0.05）.In distinguishing glaucomatous eyes from controls,VEP demonstrated area under the curve（AUC） values of 0.64-0.75 for amplitude and 0.67-0.81 for latency.The CORDA HR1 parameter was highly discriminative for glaucomatous eyes vs controls（AUC=0.94）.CONCLUSION： Significant correlations are found between MD and parameters of short-duration transient VEP and CORDA,diagnostic modalities which warrant further consideration in identifying glaucoma characteristics.

Transient analysis on surface heated piezoelectric semiconductor plate lying on rigid substrate

Based on the thermo-electro-elastic coupling theory,the mathematical model for a surface heated piezoelectric semiconductor(PS)plate is developed in the time domain.Applying the direct and inverse Laplace transformations to the established model,the mechanical and electrical responses are investigated.The comparison between the analytical solution and the finite element method(FEM)is conducted,which illustrates the validity of the derivation.The calculated results show that the maximum values of the mechanical and electrical fields appear at the heating surface.Importantly,the perturbation carriers tend to concentrate in the zone near the heating surface under the given boundary conditions.It can also be observed that the heating induced elastic wave leads to jumps for the electric potential and perturbation carrier density at the wavefront.When the thermal relaxation time is introduced,all the field quantities become smaller because of the thermal lagging effect.Meanwhile,it can be found that the thermal relaxation time can describe the smooth variation at the jump position.Besides,for a plate with P-N junction,the effect of the interface position on the electrical response is studied.The effects of the initial carrier density on the electrical properties are discussed in detail.The conclusions in this article can be the guidance for the design of PS devices serving in thermal environment.

Analysis on conducted coupling of electrical fast transient burst in mines

Under the inflammable or explosive environment, the direct measurement methods by opening up the explo- sion-proof shell of electrical installations were not adopted. So, it＇s impossible to have a quantitative analysis on the limit of conducted disturbance for electrical fast transient burst （EFT/B） in such dangerous environments. Transient conducted coupling model, which using EFT/B as its excitation source, can be built based on circuit and electromagnetic field theory. Furthermore, numerical analysis was performed. The results indicate that the capacitive coupling voltage is the same polarity as EFT/B, and is the main disturbance form of conducted coupling in mines. The inductive coupling voltage is reversed polarity with the ca- pacitive coupling voltage, and both peaks appear only in the rising time of EFT/B, which increase with the rising of load resistance. Moreover, the cable coupling voltage on the side of disturbance source is higher than the one on the other side in tunnel. To reduce the common resistance can suppress the resistive coupling disturbance.

A specialized code for operation transient analysis and its application in fluoride salt-cooled high-temperature reactors

Fluoride salt-cooled high-temperature reactors(FHRs) include many attractive features, such as high temperature, large heat capacity, low pressure and strong inherent safety. Transient characteristics of FHR are particularly important for evaluating its operation performance. Thus, a specialized code OCFHR(operation and control analysis code of FHR) issued to study an experimental FHR's operation behaviors. The geometric modeling of OCFHR is based on one-dimensional lumped parameter method, and some simplifications are taken into consideration during simulation due to the existence of complex structures such as pebble bed, intermediate heat exchanger(IHX), air radiator(AR) and multiply channels.A point neutron kinetics model is developed, and neutron physics calculation is needed to provide some key inputs including axial power density distribution, reactivity coefficients and parameters about delayed neutron precursors. For analyzing the operational performance, five disturbed transients are simulated, involving reactivity step insertion, variations of coolant mass flow rate of primary loop and intermediate loop, adjustment of air inlet temperature and mass flow rate of air cooling system.Simulation results indicate that inherent self-stability of FHR restrains severe consequences under above transients,and some dynamic features are observed, such as large negative temperature feedbacks, remarkable thermal inertia and high response delay.

Stability and dispersion analysis of reproducing kernel collocation method for transient dynamics

A reproducing kernel collocation method based on strong formulation is introduced for transient dynamics. To study the stability property of this method, an algorithm based on the von Neumann hypothesis is proposed to predict the critical time step. A numerical test is conducted to validate the algorithm. The numerical critical time step and the predicted critical time step are in good agreement. The results are compared with those obtained based on the radial basis collocation method, and they axe in good agreement. Several important conclusions for choosing a proper support size of the reproducing kernel shape function are given to improve the stability condition.

Simulation of neutron diffusion and transient analysis of MSR

Molten salt reactor(MSR) is a potential nuclear power reactor of Generation Ⅳ.The working process of the primary loop of an MSR is studied in this paper.A physical model is established to describe the coupled heat transfer for the MSR core channels,the temperature negative feedback and the neutron characteristics.The simulation code,NDPID,has been developed with the object-oriented method,conducting the neutron diffusion and transient analysis in a parallel way.The simulation data and diagrams of neutron,power,flow rate and temperature can be obtained via graphical user interface.The simulation results can be used for further study on MSRs of larger dimensions and more complicated geometry.

Consideration of transient heat conduction in a semi-infinite medium using homotopy analysis method

In the current work, transient heat conduction in a semi-infinite medium is considered for its many applications in various heat fields. Here, the homotopy analysis method （HAM） is applied to solve this problem and analytical results are compared with those of the exact and integral methods results. The results show that the HAM can give much better approximations than the other approximate methods： Changes in heat fluxes and profiles of temperature are obtained at different times and positions for copper, iron and aluminum.