Crystal Form Transition during Heating of Solvent-induced Crystalline Syndiotactic Polystyrene

The phase transition of two kinds of solvent-induced crystalline syndiotactic polystyrene (sPS). gamma-sPS and delta(c)-sPS, has been studied via WAXD and DSC. gamma-sPS transform to a-sPS at 195-225 degrees C before melt during heating, whereas delta(e)-sPS transform to first gamma-sPS and then a-sPS at 100-200 degrees C and 200-215 degrees C, respectively. The transition of delta(e)-gamma and gamma-a occurs for below melting point of sPS indicates they are all solid-solid transition.

Improving the process forming limit considering forming defects in the transitional region in local loading forming of Ti-alloy rib-web components

The isothermal local loading forming technology provides a feasible way to form Ti-alloy large-scale rib-web components in aerospace and aviation fields.However,the local loading process forming limit is restricted by forming defects in the transitional region.In this work,the feasibility of controlling forming defects and improving the process forming limit by adjusting die parameters is explored through finite element（FE） simulation.It is found that the common cavum and folding defects in the transitional region are significantly influenced by the fillet radii of left rib and middle rib,respectively.The cavum and folding defects can be effectively controlled by increasing the fillet radii of left rib and middle rib,respectively.The process forming limits considering forming defects in the transitional region are determined by the stepwise searching method under various die parameters.Moreover,the relationship between the process forming limit and die parameters is developed through the response surface methodology（RSM）.The developed RSM models suggest that increasing the fillet radii of left and middle ribs is effective to improve the process forming limit during local loading forming of rib-web components.The results will provide technical basis for the design of die parameters and the reduction amount,which is of great importance to control forming defects and improve the process forming limit in local loading forming of Ti-alloy large-scale rib-web components.

ANNEALING INDUCED VARIATION OF CRYSTALLINE STRUCTURE AND MECHANICAL PROPERTIES OF SYNDIOTACTIC POLYPROPYLENE FIBERS

Syndiotactic polypropylene （sPP） as-spun fiber （sPP1） and drawn fiber （sPP2） were prepared by melt-spinning and melt-spinning/hot-drawing, respectively. The structure transition of the two fibers induced by annealing at different temperatures and the corresponding mechanical properties were subsequently investigated by the combination of Fourier transform infrared spectroscopy （FTIR）, wide-angle X-ray diffraction （WAXD） and tensile testing. The results indicate that the chain conformation and crystal forms of the two sPP fibers are not obviously changed at low annealing temperature （40℃）. With increasing the annealing temperature, the trans-planar conformation and mesophase in sPP1 and sPP2 fibers can be completely transformed to helical conformation and crystal form I under tension. Upon removing the tension, a small amount of mesophase and trans-planar conformation will be regained. The mechanical properties of the annealed fibers are manifestly dependent on their initial structure and the annealing temperature.

D^(+)→π^(+)v■decay process within the QCDSR approach

In this paper,we investigate the charmed meson rare decay process D^(+)→π^(+)v■using an approach based on QCD sum rules.First,the pion twist-2,3 distribution amplitude(DA)moments<ξ_(2)^(n);|μand<ξ3;π(p,σ),n>|μ,are calculated up to the tenth and fourth orders,respectively,in the QCD sum rules according to the background field theory.After constructing the light-cone harmonic oscillator model for the pion twist-2,3 D As,we obtain their behaviors by matching the calculatedξ-moments.Then,the D→πtransition form factors(TFFs)are calculated using an approach based on QCD light-cone sum rules.The vector form factor at the large recoil region is f_(+)^(D)→^(π)(0)=0.627_(-0.080)^(+0.120).Using the rapidly converging simplified series expansion of z(q^(2),t),we present the TFFs and corresponding angular coefficients in the whole squared momentum transfer physical region.Based on nonstandard neutrino interactions,the■^(0)→π^(+)e■_(e)decay can be related to the■^(0)→π^(+)e■_(e)decay indirectly.Thus,we first describe the semileptonic decay process■^(0)→π^(+)e■_(e),differential decay widths,and branching fraction with B(■^(0)→π^(+)e■_(e))=0.308_(-0.066)^(+0.155)×10^(2).The■^(0)→π^(+)e■_(e)differential/total predictions for forward-backward asymmetry,q^(2)-differential flat terms,and lepton polarization asymmetry are also reported.The prediction for the D^(+)→π^(+)v■branching fraction isB(D^(+)→π^(+)v■)=1.85_(-0.46)+^(0.93)×10^(-8).

Pion-photon and kaon-photon transition distribution amplitudes in the Nambu–Jona-Lasinio model

The Nambu–Jona-Lasinio model is utilized to investigate the pion-and kaon-photon leading-twist transition distribution amplitudes using proper time regularization.Separately,the properties of the vector and axial vector pion-photon transition distribution amplitudes are examined,and the results meet the desired properties.Our study involves sum rule and polynomiality condition.The vector and axial vector pion-photon transition form factors that are present in theπ^(+)→γe^(+)νprocess are the first Mellin moments of the pion-photon transition distribution amplitudes.The vector transition form factor originates from the internal structure of hadrons,the axial current can be coupled to a pion,this pion is virtual,and its contribution will be present independently of the external hadrons.The kaon transition form factors are similar.The vector form factor's value at zero momentum transfer is determined by the axial anomaly,while this is not the case for the axial one.The vector and axial form factors,as well as the neutral pion vector form factor F_(πγγ)(t),are depicted.According to our findings,the pion axial transition form factor is harder than the vector transition form factor and harder than the electromagnetic form factor.We also discuss the link betweenπ−γandγ−πtransitions distribution amplitudes.

Effect of Rare Earth and Transition Metal Elements on the Glass Forming Ability of Mechanical Alloyed Al–TM–RE Based Amorphous Alloys

The present work aims to compare the amorphous phase forming ability of ternary and quaternary Al based alloys （Al86Ni8Y6, Al86GNi6Y6Co2, Al86NigLa6 and Al86Ni8Y45La15） synthesized via mechanical alloying by varying the composition, i.e. fully or partially replacing rare earth （RE） and transition metal （TM） elements based on similar atomic radii and coordination number. X-ray diffraction and high resolution transmission electron microscopy study revealed that the amorphization process occurred through formation of various intermetallic phases and nanocrystalline FCC Al. Fully amorphous phase was obtained for the alloys not containing lanthanum, whereas the other alloys containing La showed partial amorphization with reappearance of intermetallic phases attributed to mechanical crystallization. Differential scanning calorimetry study confirmed better thermal stability with wider transformation temperature for the alloys without La.

Measurements of the γγ＊ → π^0 and γγ＊ → ηc transition form factors at BABAR

We present measurements of the γγ＊ → π^0 transition form factor for the momentum transfer range Q^2=4-40 GeV^2 and the γγ＊ → ηc transition form factor for the range Q^2=2-50 GeV^2. The current status of measurements of the meson-photon transition form factors for the η and η＇ mesons is discussed. The results of the measurement of the ηc mass, total and two-photon widths are also presented.

A data-driven approach to π^0,η and η＇ single and double Dalitz decays

The dilepton invariant mass spectra and integrated branching ratios of the single and double Dalitz decays P→l^＋l^-γ and P→l^＋l^-l^＋l^-（P=π^0,η,η＇;l=e or μ） are predicted by means of a data-driven approach based on the use of rational approximants applied to π^0,η and η＇ transition form factor experimental data in the space-like region.

The N* physics program at Jefferson Lab

Recent measurements of nucleon resonance transition form factors with CLAS at Jefferson Lab are discussed. The new data confirm the assertion of the symmetric constituent quark model of the Roper as the first radial excitation of the nucleon. The data on high Q2 nπ＋ production better constrain the branching ratios liNK and [3Nn. For the first time, the longitudinal transition amplitude to the S11（1535） was extracted from the nπ＋ data. Also, new results on the transition amplitudes for the D13（1520） resonance are presented showing a rapid transition from helicity 3/2 dominance seen at the real photon point to helicty 1/2 dominance at higher Q2. I also discuss the status of the search for new excited nucleon states.

Single π0electro-production in the resonance region with CLAS＊

We report the analysis status of single π0electroproduction in the resonance region to study the electromagnetic excitation of the nucleon resonances. The study is aimed at understanding of the internal structure and dynamics of the nucleon. The experiment was performed using an unpolarized cryogenic hydrogen target and 2.0 and 5.8 GeV polarized electron beam during the ele and e1-6 run periods with CLAS at Jefferson Lab. The new measurements will produce a data base with high statistics and large kinematic coverage for the hadronic invariant mass （W） up to 2.0 CeV in the momentum transfer （Q2） range of 0.3--6.0 GeV2. Preliminary results will be presented and compared with the various model calculations.

Baryon resonance analysis from MAID

The unitary isobar model MAID2007 has been used to analyze the recent data of pion electroproduction. The model contains all four-star resonances in the region below W = 2 GeV and both single-Q2 and Q2 dependent transition form factors could be obtained for the Delta, Roper, D13（1520）, S11 （1535）, S31 （1620）, $11（1650）, D15（1675）, F15（1680） and P13（1720）. From the complete world data base, including also π data on the neutron, also Q2 dependent neutron form factors are obtained. For all transition form factors we also give convenient numerical parameterizations that can be used in other reactions. Furthermore, we show how the transition form factors can be used to obtain empirical transverse charge densities and our first results are given for the Roper, the S11 and D13 resonances.

Radiative decays J/ψ → η (') γ in perturbative QCD

With the recent investigations of the g＊g＊-η（＇） transition form factor and mixing scheme, we present an updated study of the radiative decays J/ψ→η（＇）γ in perturbative QCD. The decays are taken as a test ground for the g＊g＊-η（＇） transition form factors and the η-η＇ mixing scheme. The form factors are found to be working for glunic η＇ production and the mixing angle is constrained to be φ = 35.1°±1 0.8°.

Photoproduction of the Θ^+ and its vector andaxial-vector structure

We present recent investigations on the vector and axial-vector transitions of the baryon antidecuplet within the framework of the self-consistent SU（3） chiral quark-soliton model, taking into account the 1/No rotational and linear mscorrections. The main contribution to the electric-like transition form factor comes from the wave-function corrections. This is a consequence of the generalized Ademollo-Gatto theorem. It is also found that in general the leading-order contributions are almost canceled by the rotational 1/No corrections. The results are summarized as follows： the vector and tensor K＇NO coupling constants, gK＊N= 0.74--0.87 and fk＊N =0.53--1.16, respectively, and F→KN = 0.71 MeV, based on the result of the KN coupling constant gKne =0.83. We also show the differential cross sections and beam asymmetries, based on the present results. We also discuss the connection of present results with the original work by Diakonov, Petrov, and Polyakov.

Analytical investigation of γN→N^*,Δ^* transition helicity amplitudes

We study the structure of nonstrange baryons by analytically calculating the electromagnetic transition helicity amplitudes of the nucleon andΔresonances.We employ an improved hypercentral constituent quark model and obtain the corresponding eigenenergies and eigenfunctions in closed forms.Then,we calculate the transverse and longitudinal helicity amplitudes for nucleon andΔresonances.The comparison of evaluated observables and experimental data indicates good agreement between the proposed model and available data.