Analysis of maximal-ratio of transmitting/receiving antenna selection with perfect and partial channel information

To improve system performance and reduce the complexity and cost of receiver hardware,we investi-gated a new multiple-input multiple-output(MIMO)scheme combining maximal-ratio transmitting and receiver antenna selection(MRT/RAS).In this scheme,a single receiving antenna,which maximizes the signal-to-noise ratio(SNR)at the receiver,is selected for demodulation.The closed-form outage probability and the bit error rate(BER)of theMRT/RAS system are both presented.The simulation demonstrates that the MRT/RAS scheme can achieve a full diversity order as if all the receiving antennas were used.It is shown that the MRT/RAS scheme outperforms some more complex space-time codes of the same spectral efficiency.The ana-lytical results are verified by simulation.In the end,we also analyze the MRT/RAS system based on partial chan-nel information.

Designing optimal number of receiving traces based on simulation model

Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the optimal number of receiving traces in field geometry using a numerical simulation based on a field test conducted in previous research （Zhu et al., 2011）. A mathematical model is established for total energy and average efficiency energy using fixed trace spacing and optimal receiving traces are estimated. Seismic data acquired in a complex work area are used to verify the correctness of the proposed method. Results of model data calculations and actual data processing show that results are in agreement. This indicates that the proposed method is reasonable, correct, sufficiently scientific, and can be regarded as a novel method for use in seismic geometry design in complex geological regions.

FINITE ELEMENT-ARTIFICIAL TRANSMITTING BOUNDARY METHOD FOR WAVE SCATTERING FROM IRREGULAR CYLINDER

The finite element artificial transmitting boundary method is employed here to treat the near field scattering of a cylindrical wave from an irregular cylinder. A comparison is made between this method and the analytical one. And then examples are given to demonstrate the solution of several problems of the irregular object scattering. The method can not only produce clear physical pictures, but can efficiently handle many complicated scattering problems.

Partial transmitting sequence method based on trellis factor search

To obtain good trade-offs between complexity and performance onpeak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM)using partial transmitting sequence (PTS) schemes, a trellis structure based PTS factor searchmethod is proposed. The trellis search is with a variant constraint length L_C, 1 ≤ L_C ≤ V-1,where V is the number of PTS subblocks. The method is to decide a PTS factor by searching all thepossible paths obtained by varying L_C consecutive factors. The trellis search can be viewed as ageneral PTS factor search model. If L_C = V-1, it is a full search, and if L_C = 1, it is aniterative search. Using different constraint lengths, trellis factor search PTS exhibits differentPAPR reduction performances. A larger L_C results in a better performance and L_C = V-1 results inthe optimum. However, a larger L_C requires more computation. This helps to choose a good trade-offbetween complexity and performance.

2.5 Gbit/s monolithic ICs for optical fiber transmitter and receiver in 0.35 μm CMOS process

2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.

Downlink MBER Transmit Beamforming Design Based on Uplink MBER Receive Beamforming for TDD-SDMA Induced MIMO Systems

The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.

Image Processing Technology of Flaws within Infrared Transmitting Glasses

We investigated image processing algorithms of the original infrared glass flaw image. Using the Laplacian edge enhancement following LSD （Line Segment Detector） algorithm, we can get a good flaw image very consistent with the original one. This study is very helpful to further enhance the infrared glass flaw inspection technique.

A compact transmit/receive switch for 2.4 GHz reader-less active RFID tag transceiver

Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less RFID tag. The switch utilizes only the transistor width and length(W/L) optimization, proper gate bias resistor and resistive body floating technique and therefore,exhibits 1 d B insertion loss, 31.5 d B isolation and 29.2 d Bm 1-d B compression point(P1d B). Moreover, the switch dissipates only786.7 n W power for 1.8/0 V control voltages and is capable of switching in 794 fs. Above all, as there is no inductor or capacitor used in the circuit, the size of the switch is 0.00208 mm2 only. This switch will be appropriate for reader-less RFID tag transceiver front-end as well as other wireless transceivers operated at 2.4 GHz band.

Time-Domain Analysis of Underground Station-Layered Soil Interaction Based on High-Order Doubly Asymptotic Transmitting Boundary

Based on the modified scale boundary finite element method and continued fraction solution,a high-order doubly asymptotic transmitting boundary(DATB)is derived and extended to the simulation of vector wave propagation in complex layered soils.The high-order DATB converges rapidly to the exact solution throughout the entire frequency range and its formulation is local in the time domain,possessing high accuracy and good efficiency.Combining with finite element method,a coupled model is constructed for time-domain analysis of underground station-layered soil interaction.The coupled model is divided into the near and far field by the truncated boundary,of which the near field is modelled by FEM while the far field is modelled by the high-order DATB.The coupled model is implemented in an open source finite element software,OpenSees,in which the DATB is employed as a super element.Numerical examples demonstrate that results of the coupled model are stable,accurate and efficient compared with those of the extended mesh model and the viscous-spring boundary model.Besides,it has also shown the fitness for long-time seismic response analysis of underground station-layered soil interaction.Therefore,it is believed that the coupled model could provide a new approach for seismic analysis of underground station-layered soil interaction and could be further developed for engineering.

Study of the External Dose Rate and Retained Body Activity of Patients with Hyperthyroidism Who Are Receiving Ⅰ-131 Therapy

Hyperthyroidism refers to a clinical state that results from inappropriately hight hyroid hormone levels in the tissues;.Ⅰ-131 therapy plays a critical role and provides a remarkable curative effect in targeting thyroid diseases. Thyroid cells can take up isotope I-131, which emits not only beta rays but also

Time Domain Analysis of Transmit/Receive Dipole Pair Array

We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems. And we analyze this transmit/receive dipole pair array in time domain. The numerical results show that if the distance between the transmit antenna and receive antenna is appropriate the array configuration is adoptable.

Phylogeny and drug resistance of HIV PR gene among HIV patients receiving RT inhibitors in Iran

Objective: To survey the level and patterns of reverse transcriptase-based drug resistance and subtype distribution among antiretroviral-treated HIV-infected patients receiving only reverse transcriptase inhibitors in Iran.Methods: A total of 25 samples of antiretroviral therapy experienced patients with no history of using protease inhibitors were collected. After RNA extraction, reverse transcriptase-nested PCR was performed. The final products were sequenced and then analysed for drug-resistant mutations and subtypes.Results: No drug resistant mutations were observed among the 25 subjects. The results showed the following subtypes among patients: CRF 35_AD(88%), CRF 28_BF(8%),and CRF 29_BF(4%).Conclusions: A significant increase in drug resistance has been noted in recentlyinfected patients worldwide. Subtype distributions are needed to perform properlydesigned surveillance studies to continuously monitor rates and patterns of transmitted drug resistance and subtypes to help guide therapeutic approaches and limit transmission of these variants.

Experimental Investigation of Transmitting Properties of Acoustic Emission Signal and Its Application

The transmitting properties of acoustic emission(AE) signal is investigated in order to provide experimental basis for application of AE technique. In the paper, the influences of the geometric shape and material properties of the mediums and the bearing type on AE transmission are analyzed for providing the theoretic foundation for selecting the transmission route of AE signal and the fixing location of the AE sensor reasonably. According to the transmitting properties of AE, an apparatus of detecting AE signal for the tool breakage monitoring system has been set up. Its application results show that it is of benefit to improving the sensitivity of the tool breakage monitoring system.

Analysis of high-frequency local coupling instability induced by multi- transmitting formula - P-SV wave simulation in a 2D waveguide

Local coupling instability will occur when the numerical scheme of absorbing boundary condition and that of the field wave equation allow energies to spontaneously enter into the computational domain. That is, the two schemes support common wave solutions with group velocity pointed into the computation domain. The key to eliminate local coupling instability is to avoid such wave solutions. For lumped-mass finite element simulation of P-SV wave motion in a 2D waveguide, an approach for stable implementation of high order multi-transmitting formula is provided. With a uniform rectangular mesh, it is proven and validated that high-freqaency local coupling instability can be eliminated by setting the ratio of the element size equal to or greater than x/2 times the ratio of the P wave velocity to the S wave velocity. These results can be valuable for dealing instability problems induced by other absorbing boundary conditions.

Incidence of Interpersonal Violence among Individuals with Drug Addiction Receiving Compulsory Treatment: A Survey at Two Drug Detention Centers in Hunan, China

Drug dependence is a serious global health problem.To assist individuals with drug addiction,China alone has established 678 Compulsory Detoxification Detention Centers （CDDCs） that treat over300,000i ndividuals who are required by national law to receive compulsory treatment;because community-based outpatient treatment failed.

Receiver Power Allocation and Transmitter Power Control Analysis for Multiple-Receiver Wireless Power Transfer Systems

As different power has its own receivers,this paper analyzes and designs a multiple-receiver wireless power transfer(WPT)system systematically.The equivalent circuit model of the system is established to analyze the key parameters including transmitter power,receiver power,transmission efficiency,and each receiver power allocation.A control circuit is proposed to achieve the maximum transmission efficiency and transmitter power control and arbitrary receiver power allocation ratios for different receivers.Through the proposed control circuit,receivers with different loads can allocate appropriate power according to its power demand,the transmitter power and system efficiency do not vary with the change of the number of receivers.Finally,this control circuit is validated using a 130-kHz WPT system with three receivers whose power received is 3:10:12,and the overall system efficiency can reach as high as 55.5%.

Influence of Close-Up Starting Programs on Performance of Light-Weight Feedlot Steers Calves during the Early Receiving Period

The influence of close-up feed strategies on growth performance and dietary NE in light-weight feedlot steers during a 56 d receiving period was evaluated. Dietary treatments were formulated to meet the average metabolizable amino acid requirements of calves during 1) the initial 7 d;2) the initial 14 d;and 3) the initial 21 d following arrival into the feedlot, assuming average interval DMI of 2.8, 3.0, and 3.6 kg/d, respectively. Thereafter, all steers received dietary treatment 3. Fish meal was the source of supplemental protein. One hundred eight medium-framed crossbred steers (168.4 ± 5.0 kg) were blocked by weight and assigned to 18 pen groups (6 steers per pen). P-value (≤0.10) was considered as statistically significant. Daily weight gain (linear effect, P = 0.09) and gain efficiency (linear effect, P = 0.08) decreased as the close-up interval increased. DMI was not influenced by feeding program (P = 0.46). The ratio of observed to expected dietary NEm (linear effect P = 0.06) and NEg (linear effect, P = 0.05) decreased as length of close-up interval increased. Morbidity was low (18%) and not affected (P > 0.40) by dietary treatments. It is concluded that the addition of a close-up diet formulated to meet the metabolizable amino acid requirements of shipping stressed calves during the initial 7 d in the feedlot, when feed intakes are comparatively low, will have long-term beneficial effect on cattle growth performance and dietary NE.

THE INFLUENCE OF SELECTING RECEIVING SLITS AND USING RANDOMLY ORIENTED STANDARD SAMPLES ON QUANTITATIVE TEXTURE ANALYSIS

The influence of the selection of receiving slits and the use of standard samples with random orientation on the result of quantitative texture analysis was tested and discussed. The result proves that it will improve the precision of the analysis to use proper slits and a randomly oriented standard sample. A simple method was given to interpolate the correction curves of random intensities.

The Source and Observation System of Binchuan Earthquake Signal Transmitting Seismic Station and Its Preliminary Observation Results

This paper summarizes the basic situation of the Binchuan Transmitting Seismic Station and the geophysical observations of the area where it is located,with a focus on the constitution of the observation system of the transmitting seismic station,the excitation characteristics and propagation distance of signals excited by the airgun source in the reservoir and well. The paper also summarizes and discusses on the results of the observations and problems encountered since the Transmitting Seismic Station was built.Finally,this paper proposes the main research to be carried out on the basis of the project aims.

Experimental and numerical studies on the receiving gain enhancement modulated by a sub-wavelength plasma layer

A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding numerical simulations.Considerable intensification on receiving signal gain up to -10 d B in comparison with that without the plasma modulation is observed experimentally in -1 GHz RF band,with an effective enhancement bandwidth of -340 MHz and the fractional bandwidth of -34%.Then,the optimal modulation parameters of plasma are further studied by a numerical simulation.It is shown that the number density,the layer thickness,and the collision frequency of the plasma,as well as the relative distance between the plasma layer and antenna synergistically affect the modulation.Compared to the metallic antenna with the same overall dimension,the modulated antenna covered by the subwavelength plasma structure features higher receiving efficiency and lower radar cross section in the studied RF band.The mechanism of the reception enhancement is further revealed by analyzing characteristics of electromagnetic scattering and electric field distribution in the subwavelength plasma layer.The results then exhibit scientific significance and application potential of sub-wavelength plasma modulation on compact receiving antennas with higher performance and better feature of radar stealth.