We report an effective enhancement in light extraction of Ga N-based light-emitting diodes（LEDs） with an Al-doped Zn O（AZO） transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 in...We report an effective enhancement in light extraction of Ga N-based light-emitting diodes（LEDs） with an Al-doped Zn O（AZO） transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide（AAO） membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61204049 and 51402366)Guangdong Natural Science Foundation,China(Grant No.S2012040007363)Foundation for Distinguished Young Talents in Higher Education of Guangdong,China(Grant Nos.2012LYM 0058 and2013LYM 0022)
文摘We report an effective enhancement in light extraction of Ga N-based light-emitting diodes（LEDs） with an Al-doped Zn O（AZO） transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide（AAO） membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.
