A kind of transparent plastic material has been prepared with bulk copolymer of MMA-MA containing MA 20 vol% as matrix modified by introducing EtOH during bulk copolymerization to increase the transparency and by copo...A kind of transparent plastic material has been prepared with bulk copolymer of MMA-MA containing MA 20 vol% as matrix modified by introducing EtOH during bulk copolymerization to increase the transparency and by copolymerizing together with metallic salts of MA forming ionomer polymer to improve the heat-tolerance and hardness. The effect of the contents of the additives on the heat stability, hardness and transparency of the copolymer has been studied. The optical homogeneity of the copolymer material has also been examined. It has been found that the specific property of transparent material of this kind may be obtained by controlling the amounts of EtOH and metallic salt of MA.展开更多
We report an effective enhancement in light extraction of Ga N-based light-emitting diodes(LEDs) with an Al-doped Zn O(AZO) transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 in...We report an effective enhancement in light extraction of Ga N-based light-emitting diodes(LEDs) with an Al-doped Zn O(AZO) transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide(AAO) membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.展开更多
Three A-shaped nitropyrimidine derivatives with benzyl or furfuryl as bridge havebeen synthesized. They possess shorter absorption wavelengths (λ_(cut-off))<400 nm) andhigher βμ values (around 10^(-46) esu). The...Three A-shaped nitropyrimidine derivatives with benzyl or furfuryl as bridge havebeen synthesized. They possess shorter absorption wavelengths (λ_(cut-off))<400 nm) andhigher βμ values (around 10^(-46) esu). The second order nonlinear optical coefficient d_(33) ofpoled BNPMOPMDA/PMMA doped film is 1.2-2.0×10^(-9) esu obtained by in-situ SHGmeasurements. It can be expected that the chromophore-functionalized polymer containinghigher number density of synthesized chromophore as side chain will be the potential blue-light transparent frequency doubling materials.展开更多
The ion substitution characteristics of Y3+-doped (Tb0.sY0.2)3A15012 transparent ceramics synthesized by a solid-state reaction and vacuum sintering are investigated. The sample sintered at 1 680℃ exhibits the bes...The ion substitution characteristics of Y3+-doped (Tb0.sY0.2)3A15012 transparent ceramics synthesized by a solid-state reaction and vacuum sintering are investigated. The sample sintered at 1 680℃ exhibits the best optical properties, yielding a transmittance 〉75% from 900 to 1 600 nm. The Verdet constant of this sample at 632.8 nm is -108.79 rad.T-l.m-1. X-ray diffraction (XRD) results show that all of the samples have a pure garnet crystal structure without secondary phases. The microstructure of the samples reveals homogeneous grain sizes that averages 〈10μm.展开更多
基金Project supported by the National Natural Science Foundation of China
文摘A kind of transparent plastic material has been prepared with bulk copolymer of MMA-MA containing MA 20 vol% as matrix modified by introducing EtOH during bulk copolymerization to increase the transparency and by copolymerizing together with metallic salts of MA forming ionomer polymer to improve the heat-tolerance and hardness. The effect of the contents of the additives on the heat stability, hardness and transparency of the copolymer has been studied. The optical homogeneity of the copolymer material has also been examined. It has been found that the specific property of transparent material of this kind may be obtained by controlling the amounts of EtOH and metallic salt of MA.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61204049 and 51402366)Guangdong Natural Science Foundation,China(Grant No.S2012040007363)Foundation for Distinguished Young Talents in Higher Education of Guangdong,China(Grant Nos.2012LYM 0058 and2013LYM 0022)
文摘We report an effective enhancement in light extraction of Ga N-based light-emitting diodes(LEDs) with an Al-doped Zn O(AZO) transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide(AAO) membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.
基金This work was supported by the grant of theted National Natural Science Foundation of China and by the Chinese Academy of Sciences.
文摘Three A-shaped nitropyrimidine derivatives with benzyl or furfuryl as bridge havebeen synthesized. They possess shorter absorption wavelengths (λ_(cut-off))<400 nm) andhigher βμ values (around 10^(-46) esu). The second order nonlinear optical coefficient d_(33) ofpoled BNPMOPMDA/PMMA doped film is 1.2-2.0×10^(-9) esu obtained by in-situ SHGmeasurements. It can be expected that the chromophore-functionalized polymer containinghigher number density of synthesized chromophore as side chain will be the potential blue-light transparent frequency doubling materials.
基金supported by the National Natural Science Foundation of China(Nos.51172254 and 51202269)the Science and Technology Commission of Shanghai Municipality(No.10JC1415700)
文摘The ion substitution characteristics of Y3+-doped (Tb0.sY0.2)3A15012 transparent ceramics synthesized by a solid-state reaction and vacuum sintering are investigated. The sample sintered at 1 680℃ exhibits the best optical properties, yielding a transmittance 〉75% from 900 to 1 600 nm. The Verdet constant of this sample at 632.8 nm is -108.79 rad.T-l.m-1. X-ray diffraction (XRD) results show that all of the samples have a pure garnet crystal structure without secondary phases. The microstructure of the samples reveals homogeneous grain sizes that averages 〈10μm.