Spalling characteristics of high-temperature treated granitic rock at different strain rates

The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.

INFLUENCE OF LOADING RATE AND SPECIMEN HEIGHT ON FLEXURAL STRENGTH OF Al_2O_3 AT HIGH TEMPERATURES

In this paper, the influence of loading rate and specimen height on flexural strength of Al2O3 at high temperatures has been studied by three-point bending method. The experimental results show that the flexural strength of Al2O3 decreases with increasing specimen height at room temperature, and it tends to stability when height increases to a certain degree (h=5mm in this paper), while the flexural strength of Al2O3 variates unapparently at high temperature with increasing height. There is a critical loading rate R . c. When loading rate R . is less than R . c, the flexural strength of Al2O3 increases with increasing loading rate and it drops sharply when loading rate is higher than R . c. The sensitivity of flexural strength to the loading rate decreases with elevating temperatures.

Development of a new instrument for measurement of high temperature mechanical properties of resin-bonded sand

The mechanical properties of resin-bonded sand mixtures at high temperatures significantly affect the quality of casting. However, the existing instruments for high-temperature performances testing mainly focus on inorganic binder-bonded sands no matter the test items or the atmospheric protection, while the instrumentss specially designed for resin-bonded sand are not yet available. A new instrument for testing the hightemperature performance of resin sand was designed including the confirmation of the testing parameters, loading, measurement and control systems, and the design of the frame shape and heating furnace. This instrument can test the compressive strength, heat tolerance time and restraining load of phenol-formaldehyde resin coated sand, self-hardened furan resin sand, and trimethylamine(TEA)-based resin bonded sand at high temperatures. The developed instrument has a high accuracy offering smaller than 0.3% deviation at a full scale in the measurement of the high temperature compressive strength and the restraining load over the range of 0-6.8 MPa and 0-2,000 N, respectively. The high temperature heat tolerance time range is 0-300 s and its measurement accuracy is ±1 s.

Oxygen vacancies with localized electrons direct a functionalized separator toward dendrite-free and high loading LiFePO_(4)for lithium metal batteries

The pursuit of high energy density has promoted the development of high-performance lithium metal batteries(LMBs).However,the underestimated but non-negligible dendrites of Li anode have been observed to shorten battery lifespan.Herein,a composite separator(TiO_(2-x)@PP),in which TiO_(2)with electron-localized oxygen vacancies(TiO_(2-x))is coated on a commercial PP separator,is fabricated to homogenize lithium ion transport and stabilize the lithium anode interface.With the utilization of TiO_(2-x)@PP separators,the symmetric lithium metal battery displays enhanced cycle stability over 800 h under a high current density of 8 m A cm^(-2).Moreover,the LMBs assembled with high-loading LiFePO_(4)(9.24 mg cm^(-2))deliver a stable cycling performance over 900 cycles at a rate of 0.5 C.Comprehensive theoretical studies based on density functional theory(DFT)further unveil the mechanism.The favorable TiO_(2-x)is beneficial for facilitating fast Li+migration and impeding anions transfer.In addressing the Li dendrite issues,the use of TiO_(2-x)@PP separator potentially provides a facile and attractive strategy for designing well-performing LMBs,which are expected to meet the application requirements of rechargeable batteries.

Effect of loading rates on the characteristics of thermal damage for mudstone under different temperatures

The uniaxial compression tests for mudstone specimens are carried out with four different loading rates from room temperature to 400℃ by using the Rock Mechanics Servo-controlled Testing System MTS810 and high temperature furnace MTS652.02.The mechanical properties of mudstone with various loading rates are studied under different temperature conditions.The results show that when temperature increases from room temperature to 400℃ and loading rate is less than 0.03 mm/s,the peak strength of mudstone specimen decreases as loading rate increases,while the various peak strengths show significant differences when loading rate exceeds 0.03 mm/s.At room temperature,the elastic modulus decreases at the first time and then increases with loading rate rising.When the temperature is between200 and 400℃,the elastic modulus presents a decreasing trend with increasing loading rate.With increasing the loading rate,the number of fragments in mudstone becomes larger and even the powder is observed in mudstone with higher loading rate.Under high loading rate,the failure mode of mudstone specimens under different temperatures is mainly conical damage.

A waveform modification method for testing dynamic properties of rock under high temperature

In this study,a waveform modification method was proposed using a self-designed heating device combined with the split Hopkinson pressure bar(SHPB)technique for determination of dynamic behaviors of rock at high temperature.Firstly,the temperature gradient distribution on the incident bar was measured according to the variation of elastic modulus of the bar with temperature,and the relationship between the longitudinal wave velocity and temperature of the bar was obtained based on onedimensional stress wave theory.The incident bar with a temperature gradient was divided into a series of microelements,and then the transmission coefficient of the whole incident bar was obtained.Finally,the stress wave was modified by the transmission coefficient from 25℃ to 600℃.This method was used to study the dynamic properties of rock at high temperature,which not only preserves a classical SHPB device,but also effectively ensures the accuracy of the experimental results.A dynamic Brazilian disc experiment was carried out to explore the influences of loading rate and temperature on dynamic tensile strength of sandstone at high temperature using the proposed waveform modification method.

Flow Characteristics of Crude Oil with High Water Fraction during Non-heating Gathering and Transportation

In order to ensure the safety of the non-heating gathering and transportation processes for high water fraction crude oil,the effect of temperature,water fraction,and flow rate on the flow characteristics of crude oil with high water fraction was studied in a flow experimental system of the X Oilfield.Four distinct flow patterns were identified by the photographic and local sampling techniques.Especially,three new flow patterns were found to occur below the pour point of crude oil,including EW/O&W stratified flow with gel deposition,EW/O&W intermittent flow with gel deposition,and water single-phase flow with gel deposition.Moreover,two characteristic temperatures,at which the change rate of pressure drop had changed obviously,were found during the change of pressure drop.The characteristic temperature of the first congestion of gel deposition in the pipeline was determined to be the safe temperature for the non-heating gathering and transportation of high water cut crude oil,while the pressure drop reached the peak at this temperature.An empirical formula for the safe temperature was established for oil-water flow with high water fraction/low fluid production rate.The results can serve as a guide for the safe operation of the non-heating gathering and transportation of crude oil in high water fraction oilfields.

Comprehensive Analysis of High Temperature Performance of SBS-modified Asphalt Mixture

Evaluation of high temperature performance of SBS-modified asphalt mixture was presented.Both wheel loaded method and creep method were adopted for two different mixtures and two kinds of specimens with different height,and corresponding indicators were measured.Meanwhile,the correlation between these indicators was thoroughly analyzed and two kinds of mixtures were compared.The experimental results show that there is a good linear relationship between LWT indicators and CT indicators for M-13,while a relatively poor relationship for M-25,especially that between dynamic stiffness and static stiffness and that between dynamic stability and static creep stiffness.Besides,logarithmic relationship between DS and RD has a higher determination coefficient than that for linear relationship.Thus,multi-index evaluation should be taken for synthetically assessing high temperature performance of asphalt mixture.

Design consideration of a super-high speed high temperature superconductor maglev evacuated tube transport (I)

The super-high speed high temperature superconductor （HTS） maglev evacuated tube transport （ETT） is a promising transport mode for the future. As a key component of the HTS maglev vehicle, the permanent magnet guide- ways （PMGs） with different geometrical configurations and iron yoke widths are analyzed by finite element method （FEM）. The levitation force of a single onboard HTS maglev device over the designed PMG at different field cooling heights （FCH） is measured by magnetic levitation measurement system. Based on the designed PMG and experimental results, a preliminary scheme of subterranean super-high speed HTS maglev ETT is described in this paper. The HTS maglev ETT is mainly composed of an evacuated tube, HTS maglev vehicle, PMG, propulsion system, station, emergency rescue system, etc. In addition, a subterranean tube that consists of foundation tube and vacuum airproof layer is introduced. In order to convert the stress caused by the air pressure difference between inside and outside of the vehicle, a multi-circular vehicle body is designed. The vehicle is driven by a linear motor propulsion system under the control of a ground controlling system. The scheme of long-distance super-high speed passenger transportation is accomplished by the connection of different vehicles.

Nonlocal Theory of High-Temperature Superconductivity

The Boltzmann local physical kinetics forecasts the destruction of SC regime because of the heat movement of particles. Then, the most fundamental distinction between a strange metal and a conventional metal is the absence of well-defined quasi-particles. Here, we show that the mentioned “quasi-particles” are solitons, which are formed as a result of self-organization of ionized matter. Shortcomings of the Boltzmann physical kinetics consist in the local description of the transport processes on the level of infinitely small physical volumes as elements of diagnostics. The non-local physics leads to the theory superconductivity including the high temperature diapason. The generalized non-local non-stationary London’s formula is derived.

High-temperature energy storage dielectric with inhibition of carrier injection/migration based on band structure regulation

Dielectric capacitors have a high power density,and are widely used in military and civilian life.The main problem lies in the serious deterioration of dielectric insulation performance at high temperatures.In this study,a polycarbonate(PC)-based energy storage dielectric was designed with BN/SiO_(2)heterojunctions on its surface.Based on this structural design,a synergistic suppression of the carrier injection and transport was achieved,significantly improving the insulating properties of the polymer film.In particular,the composite film achieves optimal high-temperature energy-storage properties.The composite film can withstand an electric field intensity of 760 MV m^(-1)at 100℃and obtain an energy storage density of 8.32 J cm^(-3),while achieving a breakthrough energy storage performance even at 150℃(610 MV m^(-1),5.22 J cm^(-3)).Through adjustment of the heterojunction structure,free adjustment of the insulation performance of the material can be realized;this is of great significance for the optimization of the material properties.

Experimental study on stress-strain-temperature models for structural steel

For the research on steel structure in fire,it is very important to determine the properties of structural steel at elevated temperature.Up to now,the high-temperature properties of material is believed to be related to only temperature state,which is not precise enough to simulate the behavior of steel structures under different combinations of heating,cooling,loading,and unloading.To analyze the influence of the temperature-load history on the steel properties,a series of tests were carried out under different temperature-load paths about steel Q235,which is widely used in steel structures in China.In this paper,the method to set the temperature-load paths was introduced;the variety regulation of steel properties changing with temperature was analyzed under different paths;according to experimental results,the formulas of elastic modulus and yield strength at elevated temperature were fitted,and the stress-strain-temperature 3D relationships of structural steel under different paths were presented.

First-Principles Methods in the Investigation of the Chemical and Transport Properties of Materials under Extreme Conditions

Earth is a dynamic system. The thermodynamics conditions of Earth vary drastically depending on the depth, ranging from ambient temperature and pressure at the surface to 360 GPa and 6600 K at the core. Consequently, the physical and chemical properties of Earth’s constituents (e.g., silicate and carbonate minerals) are strongly affected by their immediate environment. In the past 30 years, there has been a tremendous amount of progress in both experimental techniques and theoretical modeling methods for material characterization under extreme conditions. These advancements have elevated our understanding of the properties of minerals, which is essential in order to achieve full comprehension of the formation of this planet and the origin of life on it. This article reviews recent computational techniques for predicting the behavior of materials under extreme conditions. This survey is limited to the application of the first-principles molecular dynamics (FPMD) method to the investigation of chemical and thermodynamic transport processes relevant to Earth Science.

High Temperature Wear Characteristics of a New Hot Work Die Steel CH95

High temperature wear characteristics of a new hot work die steel CH95 doped with a small amount of rare earth （ Re ） and boron （ B ） have been investigated and compared with those of conventional die steel H11 at a series of temperatures and loads. Worn surfaces of CH95 steel and H11 steel were analyzed with a scanning electron microscope. It is found that high temperature mechanical properties of CH95 steel are much better than those of H11 steel. The oxide layer formed on the worn surface plays an important role in wear resistance at high temperature. When the load is less than 63 N, the surface oxide layer keeps integrated and the effect of load on high temperature wear is small. When the load is higher than 63 N, the supporting ability of matrix to the oxide layer decreases with the increase of load, which results in an increase of wear rate. Compared with H11 steel, the wear resistance of CH95 steel is much better and the worn surface of CH95 steel is smoother. It is easier for CH95 steel to form a compact and integrated surface oxide layer at high temperature than for Hll steel, which protects the worn surface and reduces wear.

Liquid metal welding enabling high loading binder/carbon-free layered oxide cathode toward high-performance liquid and solid-state battery

High loading cathode with high active material proportion is a practical demand but far below the desirable value to achieve high energy density lithium-ion batteries(LIBs).Normally,the Li^(+)/electron transport between active materials and electrolyte/c arbon,however,it is poor and areal resistance is extremely high for a high loading/thick cathode.In this manuscript,taking high-voltage lithium cobalt oxide LiCoO_(2)(LCO)as an example,we design a facile liquid metal welding method enabled by a low melting-point indium-tin oxide In_(2)O_(3)/SnO_(2)(ITO)during a thermal treatment process,the strongly adhesion active particles show robust mechanical property for the free-standing LCO cathode with a pellet architecture.We also demonstrate that the O_(2)atmosphere plays a critical role on the interfacial property,that is preventing the layered structure to rock-salt Co_(3)O_(4)as well as further enhancing the interfacial mechanical integration.As expected,the LCO-ITO free-standing cathode not only shows robust mechanical property with densely packed configuration but also provides a fast Li^(+)/electron pathway at the interface.Consequently,the LCO-ITO composite cathode exhibits excellent electrochemical cycling performance in both liquid and solid-state cells.For example,even at a high active material mass of 56 mg·cm^(-2),the LCO cathode still delivers a specific capacity of 151 mAh·g^(-1)and maintains132.5 mAh·g^(-1)(corresponding to 7.4 mAh·cm^(-2))after 80cycles.The LCO-ITO-O_(2)cathode is also applicable to a solidstate cell,which exhibits a high capacity of 100.4 mAh·g^(-1)after 200 cycles of long-term cycling.The excellent electrochemical of the LCO-ITO-O_(2)reveals the successful engineering mechanical architecture and interfacial carriers transport,which may be expected as an alternative approach to achieve high energy density LIBs.

Optimizing the Preparation Conditions of Bi-2223 Superconducting Phase Using PbO and PbO₂

In this work, superconducting samples of type (Bi1.8Pb0.4)Sr1.9Ca2.1Cu3O10+δ were prepared, with Pb0.4 composed of Pb0.2 2+ and Pb0.24+ , at different sintering temperatures ranging from 835℃to 855℃. The prepared samples were characterized using x-ray powder diffraction (XRD), scanning electron microscope (SEM), electron dispersive spectroscopy (EDS) and differential scanning calorimetery (DSC). The superconducting properties were investigated using electrical resistivity and transport critical current density. Our results showed that the sample prepared at sintering temperature 845?C has the optimum value of superconducting transition temperature Tc and transport critical current density Jc.

上海地铁某车站空调系统高效制冷机房改造实测分析

地铁车站空调系统高效技术是当前轨道交通节能降碳的主要手段,针对上海某地铁车站制冷机房高效化改造的具体情况、改造效果、能效提升进行了详细的分析和研究。改造选择了磁悬浮冷水机组,应用了变频技术来优化水泵的运行,改造后空调季制冷机房平均能效比达到5.16,年节电量约为30万kWh,节能效果显著。通过对制冷机房运行数据进行对比分析得知,负载率的优化对冷水机组能效具有直接而显著的影响,通过调整冷机出水温度和优化水泵变频策略,能进一步提高制冷机房的能效,为地铁车站制冷机房高效化改造和能效提升提供参考和帮助。

轮式动态模拟仪在高含水期原油不加热集输中的应用

随着不断深入开发,油田集油管线内产液的流变性逐渐转变为高含水期“水包油”为主的流态,因而管道内的流动条件得以改善。通过前期开展的季节性停掺冷输试验证实,高含水期集输进站温度可以接近凝固点甚至低于凝固点。因此提出利用临界粘壁温度作为采油井不加热集输边界条件,并利用轮式动态模拟分析仪测试单井临界粘壁温度,指导采油井平稳集输,应用后实现措施节气219.6×10^(4)m^(3),节电73.4×10^(4)kWh。

粗骨料取代率对机制砂再生混凝土高温性能的影响

为探究不同粗骨料取代率对机制砂再生混凝土(RCM)高温性能的影响,以不同粗骨料取代率(0%、20%、40%、60%、80%、100%,质量分数)制备RCM并研究其单面受高温后的表面形貌、质量损失率、抗压强度、荷载变形曲线及微观形貌。结果表明,粗骨料取代率在40%~60%时,在低于600℃的高温试验下RCM表现良好。当温度在200℃时,各组试块表面形貌变化不大,质量损失率较小,抗压强度略微上升;当温度在400℃时,各组试块表面开始出现裂缝,质量损失率为4.35%~6.47%,抗压强度开始下降,此时粗骨料取代率影响不大;当温度达到600℃时,表面形貌变化明显,质量损失率上升到6.42%~8.70%,抗压强度最终降低到基准强度的80%左右,此时粗骨料取代率在40%~60%的试块表现良好;当温度达到800℃时,各组试块表面形貌变化进一步加剧,粗骨料取代率大于60%的试块受影响非常明显,同时各类性能参数表明混凝土已完全丧失工作性能。

高温高负荷下Miller发动机扭矩提升的控制策略

为了解决Miller循环混动发动机在高温高负荷下爆震倾向明显增加而导致扭矩损失严重的问题,该研究通过台架试验,对进排气相位、喷油比例和喷油相位等关键控制参数进行了优化,并根据高温高负荷下发动机的工作特性,在发动机控制逻辑中引入温度修正。结果表明:进排气相位优化等措施成功抑制了爆震;优化后的发动机在1600 r/min高温全负荷工况下扭矩提升了18.5%;并且实现了对进排气相位、喷油参数和点火角的高温补偿,以及不同温度下控制参数的解耦,显著改善了高温高负荷下的动力性能衰减。