Carbon nanotube (CNT) has remarkable piezoresistive properties,which makes its extremely sensitive to the mechanical force. In this study,the CNT yarn with the strength of 90 MPa and the strain sensing gage factor of ...Carbon nanotube (CNT) has remarkable piezoresistive properties,which makes its extremely sensitive to the mechanical force. In this study,the CNT yarn with the strength of 90 MPa and the strain sensing gage factor of 1.75 was selected and embedded into the ethylene vinyl acetate (EVA) elastomer as a sensing material.By measuring the electric resistance changing under the stretching,bending,longitudinally and transversely compressing of the CNT embedded EVA, the resistance changing curves and their linear correlations were obtained and analyzed. The result shows that the gage factor under the tensile test is the highest( 2.51),which is higher than the original value of CNT yarn (1.75). The gage factors of the CNT yarn embedded into EVA elastomer under bending and longitudinal and transverse compression are 2.29,1.55 and 0.79,respectively.展开更多
The transverse stretching vibration of thick sandwich plates,which is attributed to largely different stiffness at the adjacent layers,is a challenging issue,and efficient approach for such issue is less reported in t...The transverse stretching vibration of thick sandwich plates,which is attributed to largely different stiffness at the adjacent layers,is a challenging issue,and efficient approach for such issue is less reported in the published literature.Thus,natural frequencies corresponding to stretching vibration modes are generally neglected in engineering design,which might impact structural safety as frequencies of the exciting force are close to transverse stretching vibration frequencies.This paper proposes an alternative higher-order model for dynamic analysis corresponding to the higher-order vibration modes.The proposed model is classified in the displacement-based equivalent single-layer theory,as the number of displacement parameters in the proposed model is independent of the layer number.The continuity of displacements and transverse shear stresses can be fulfilled at the interfaces between the adjacent layers of structures.To demonstrate the capability of the proposed model,typical examples are analyzed by utilizing the proposed model,the threedimensional finite element method and the chosen higher-order models.By comparing with the exact three-dimensional elasticity solutions,it is found that the proposed model can yield more accurate natural frequencies corresponding to the higher-order displacement modes than the selected models.Moreover,the factors influencing reasonable prediction of the higher-order frequencies are investigated in detail,which can provide a reference for the accurate prediction of the higher-order frequencies.展开更多
基金National Natural Science Foundations of China(Nos.51303025,51503120)Shanghai Science and Technology Committee,China(No.14YF1409600)+2 种基金Shanghai Municipal Education Commission,China(No.ZZgcd14016)Fundamental Research Funds for the Central Universities,ChinaDonghua University Distinguished Young Professor Program,China
文摘Carbon nanotube (CNT) has remarkable piezoresistive properties,which makes its extremely sensitive to the mechanical force. In this study,the CNT yarn with the strength of 90 MPa and the strain sensing gage factor of 1.75 was selected and embedded into the ethylene vinyl acetate (EVA) elastomer as a sensing material.By measuring the electric resistance changing under the stretching,bending,longitudinally and transversely compressing of the CNT embedded EVA, the resistance changing curves and their linear correlations were obtained and analyzed. The result shows that the gage factor under the tensile test is the highest( 2.51),which is higher than the original value of CNT yarn (1.75). The gage factors of the CNT yarn embedded into EVA elastomer under bending and longitudinal and transverse compression are 2.29,1.55 and 0.79,respectively.
基金co-supported by the National Natural Science Foundation of China(No.12172295)SKLLIM1902the Natural Science Foundation in Shaanxi Province,China(No.2019JQ-909)。
文摘The transverse stretching vibration of thick sandwich plates,which is attributed to largely different stiffness at the adjacent layers,is a challenging issue,and efficient approach for such issue is less reported in the published literature.Thus,natural frequencies corresponding to stretching vibration modes are generally neglected in engineering design,which might impact structural safety as frequencies of the exciting force are close to transverse stretching vibration frequencies.This paper proposes an alternative higher-order model for dynamic analysis corresponding to the higher-order vibration modes.The proposed model is classified in the displacement-based equivalent single-layer theory,as the number of displacement parameters in the proposed model is independent of the layer number.The continuity of displacements and transverse shear stresses can be fulfilled at the interfaces between the adjacent layers of structures.To demonstrate the capability of the proposed model,typical examples are analyzed by utilizing the proposed model,the threedimensional finite element method and the chosen higher-order models.By comparing with the exact three-dimensional elasticity solutions,it is found that the proposed model can yield more accurate natural frequencies corresponding to the higher-order displacement modes than the selected models.Moreover,the factors influencing reasonable prediction of the higher-order frequencies are investigated in detail,which can provide a reference for the accurate prediction of the higher-order frequencies.
