Monte Carlo Simulation for the Adsorption of Symmetric Triblock Copolymers

The adsorption behavior of symmetric triblock copolymers, Am/2BnAm/2, from a nonselective solvent at solid-liquid interface has been studied by Monte Carlo simulations on a simple lattice model. Either segment A or segment B is attractive, while the other is non-attractive to the surface. Influences of the adsorption energy, bulk concentration, chain composition and chain length on the microstructure of adsorbed layers are presented. The results show that the total surface coverage and the adsorption amount increases monotonically as the bulk concentration increases. The larger the adsorption energy and the higher the fraction of adsorbing segments, the higher the total surface coverage is exhibited. The product of surface coverage and the proportion of non-attractive segments are nearly independent of the chain length, and the logarithm of the adsorption amount is a linear function of the reciprocal of the reduced temperature. When the adsorption energy is larger, the adsorption amount exhibits a maximum as the fraction of adsorbing segment increases. The adsorption isotherms of copolymers with different length of non-attractive segments can be mapped onto a single curve under given adsorption energy. The adsorption layer thickness decreases as the adsorption energy and the fraction of adsorbing segments increases, but it increases as the length of non-attractive segments increases. The tails mainly govern the adsorption layer thickness.

SYNTHESIS OF TRIBLOCK COPOLYMERS OF STYRENE AND ISOPRENE BY A NITROXIDE-MEDIATED LIVING FREE RADICAL POLYMERIZATION

The controlled free radical polymerization of styrene and isoprene initiated with benzoyl peroxide (BPO) in the presence of 2,2,6,6-tetramethyl piperidine-N-oxyl (TEMPO) at 125 'C were performed. The obtained polyisoprene and polystyrene homopolymers served as macroinitiators for block copolymerization of isoprene and styrene to synthesize poly- (styrene-b-isoprene) and poly(isoprene-b-styrene) diblock copolymers. Diblock copolymers with well-defined structures as well as controlled and narrow molecular weight distribution were obtained from the lower-mass polystyrene and polyisoprene homopolymers. These copolymers were found to be active as macroinitiators in the synthesis of the poly(styrene-b-isoprene-b-styrene) and poly(isoprene-b-styrene-b-isoprene) triblock copolymers. 1H-NMR spectroscopy and gel permeation chromatography (GPC) were used for the investigation of polymer structure, molecular weight and polydispersity (PD).

Effect of spacer length on the liquid crystalline property of azobenzene-containing ABA-type triblock copolymers via ATRP

The effect of flexible spacer length on the liquid crystalline property of ABA-type triblock copolymers containing azobenzene groups was investigated. For the study, the monomers, n-[4-(4-ethoxyphenylazo)phenoxy]alkyl methacrylates with varying methylene groups (n = 0, 2, 6) were used to synthesize a series of azobenzene-containing amphiphilic triblock copolymers PAnC–PEG–PAnC by atom transfer radical polymerization (ATRP). Differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and one-dimensional X-ray diffraction (1D WAXD) have shown that the glass transition temperatures of these copolymers decreased with increasing n, PA0C–PEG–PA0C has no mesophase, while both PA2C–PEG–PA2C and PA6C–PEG–PA6C have a nematic mesophase. These differences derive from the length of spacer groups between the polymer backbone and side-chain LC monomers.

SYNTHESIS AND CHARACTERIZATION OF POLY(AMINO ACID-UREA)S COMPRISING NOVEL TRIBLOCK COPOLYMERS OF POLY(TETRAHYDROFURAN)AND POLY(γ-BENZYL L-GLUTAMATE)S

A kind of novel triblock copolymers of poly(γ-benzyl L-glutamate)-b-poly(tetrahydrofuran)-b-poly(γ-benzyl L-glutamate)s(PBLG-b-PTHF-b-PBLG)was synthesized by using bis(3-aminopropyl)terminated polytetrahydrofuran to initiate the ring-opening polymerization ofγ-benzyl L-glutamate N-carboxyanhydride(BLG-NCA).The corresponding multiblock poly(amino acid-urea)s were prepared in one-pot protocol from the chain extension of PBLG-b-PTHF-b-PBLG with MDI.The resulting triblock and multiblock copolymers were characterized by FTIR,~1H-NMR,^(13)C-NMR and GPC techniques.It is demonstrated that the chain extension has taken place to give rise to the copolymers with the well-defined block composition and narrow molecular weight distribution.A distinct T_g arising from the hard-segments was observed in all the copolymers.Their mechanical properties showed an increasing trend with the molecular weight enhancement of the prepolymers.

Morphologies of Core-Shell-Cylinder-Forming ABC Star Triblock Copolymers in Nanopores

The self-assembly behavior of ABC star triblock copolymers can lead to a large number of nanostructures. Indeed, many new and interesting structures have already been discovered and proven to be hotspot in soft matter physics research. In this work, we introduce different phase diagrams of core-shell-cylinder-forming ABC star triblock copolymers under different conditions, including in-bulk and pore geometries with different sizes. The relation between the pore size geometries and their corresponding structures are also revealed. The different properties of the surface potential field that significantly affect the self-assembly process of ABC star triblock copolymers are investigated as well.

STUDIES ON MICELLE BEHAVIORS OF STYRENE-BUTADIENE-STYRENE (SBS) TRIBLOCK COPOLYMERS IN METHYL ETHYL KETONE (MEK) BY POSITRON ANNIHILATION TECHNIQUE

Positron annihilation technique was used to study the micelle behaviors of two SBS triblock copolymers in MEK solvent at different temperatures. Annihilation lifetime τ_3 of ortho-positronium (o-Ps) exhibited an obvious transition from shorter lifetime to longer lifetime with temperature. It was attributed to the change of micelle behavior of SBS copolymer molecules in the solution. Experimental results of sedimentation velocity of ultracentrifuge were also reported.

Nanoparticle-filled ABC Star Triblock Copolymers:A Dissipative Particle Dynamics Study

The phase behavior of nanoparticle-filled ABC star triblock copolymers was investigated by dissipative particle dynamics simulation.Two typical structures,the three-color lamella and polygonal tiling structures,were selected to demonstrate the effect of filling the nanoparticle.Results showed that the filling effects were obvious on the lamellar structure but not on the tiling structure,where the high concentration of fillers can destroy the lamellar structures.The dynamic processes of nanoparticle filling were investigated for the lamellar and tiling structures,where three stages can be sorted by analyzing the system energies and chain conformations.Moreover,the mechanical properties were evaluated for the lamellar structures by exploring the interface tensions.The findings can help us understand the potential applications of microstructures based on complex block copolymers and nanoparticle mixtures.

Simulation of Surface-Induced Morphology Transition and Phase Diagram of Linear Triblock Copolymers under Spherical Confinement

In this work,the nanostructures and phase diagrams of lamella-forming and cylinder-forming ABC linear triblock copolymers confined in spherical cavities are investigated on the basis of real-space self-consistent field theory.We designate specific monomer-monomer interactions and block composition and study morphology transformation under spherical confinement with a neutral surface.Various potentially valuable morphological structures,such as two-or three-colored spheres,rotational structures,and biconcave disklike structures,are identified in the phase diagrams constructed on confining diameters.Single confinement induces an obvious transformation of self-assembled structures,which still retain some of the conformational properties of bulk structures.We then focus on phase morphology under preferential surfaces.Absorption can smooth out differences in block ratios,and similar structures can be assembled from block copolymers with different proportions.We incorporate a non-centrosymmetric feature into our spherical confinement model and design a Janus adsorption field to explore unpredictable microphase behavior.Results show that the unbalance of the block ratio causes adsorption to exert a stable shaping effect on conformation.The influence of confinement on the degree of freedom of polymer chains disrupts the influence of adsorption on the complexity and transformation activity of self-assembled structures.The theoretical results correspond to recent experimental observations and contribute to the field functional material synthesis.

SELF-ASSEMBLY OF LINEAR TRIBLOCK COPOLYMERS UNDER CYLINDRICAL NANOPORE CONFINEMENTS

The self-assembly of linear ABC triblock copolymers under cylindrical confinements is investigated in two- dimensional space using the real-space self-consistent field theory. The effects of confinement degrees and preferential strengths on the triblock copolymer phase behaviors with special polymer parameters are first considered. On one hand, different confinement degrees cause different phase behaviors in nanopores with the neutral surfaces. Moreover, the strongly preferential surface fields can surpass the confinement degrees and volume fractions in determing the confined phase behaviors. On the other hand, in contrast, confined morphologies are more sensitive to the variations in the A-preferential surface field strength. Subsequently, the incompatibility degrees between different blocks are systematically varied under cylindrical nanopore confinements. Under cylindrical nanopore confinements, the morphologies are very sensitive to the variations in the incompatibility degrees. Meanwhile, nanopore confinements can affect order-disorder and order-order transition points in the bulk. The corresponding free, internal, and entropic energies as well as the order parameters are also quantificationally examined to deeply investigate the confined phase mechanisms, and a number of morphological transitions are confirmed to be of first-order. These findings may guide the design of novel nanostructures based on triblock copolymers by introducing confinements.

Self-assembly Behavior of Rod-Coil-Rod Triblock Copolymers within a Planar Slit

The self-assembly behavior of sphere-forming R_5C_（30）R_5 triblock copolymers within a planar slit is studied by performing dissipative particle dynamics simulations. A sequence of novel structures which are not observed in bulk are formed within slits, including wetting layers, island-like structure, parallel cylinders, perpendicular cylinders and crosscylindrical structures. Perpendicular cylinders are always formed before the increase in the layers of parallel cylinders. A phase diagram of the assembled structures with respective to the slit property and height is thus presented. The rod length is found to have a significant impact on the rod alignment, and a disordered-ordered transition of rod orientation occurs with an increase in the length of rod blocks. Some special structures, such as parallel half-cylinders and arrowhead-shaped morphology, are observed when the rod length increases to a certain extent. Our results show that the property and height of the slit and rod length all influence the self-assembly of rod-coil-rod triblock copolymers.

MORPHOLOGY STUDY OF A SERIES OF AZOBENZENE-CONTAINING SIDE-ON LIQUID CRYSTALLINE TRIBLOCK COPOLYMERS

A series of azobenzene containing side-on liquid crystalline ABA triblock copolymers were investigated. This triblock series possesses the same central liquid crystal block B and various lengths of the amorphous block A. Transmission electron microscopy （TEM）, small angle X-rays and neutron scattering （SAXS and SANS） were used to study their morphologies. After annealing the samples over weeks at a temperature within the nematic temperature range of block B, different morphologies （disordered, lamellar, perforated layer and hexagonal cylinder） were observed by TEM. The alignment behavior of these azo triblock copolymers in the magnetic field for artificial muscle application, as well as the phase period and the order-disorder transition （ODT） were studied in situ by SANS.

Precisely installing gold nanoparticles at the core/shell interface of micellar assemblies of triblock copolymers

Two reduction-cleavable ABA triblock copolymers possessing two disulfide linkages,PMMA-ssPMEO3MA-ss-PMMA and PDEA-ss-PEO-ss-PDEA were synthesized via facile substitution reactions from homopolymer precursors,where PMMA,PMEO3MA,PDEA,and PEO represent poly（methyl methacrylate）,poly（tri（ethylene glycol） monomethyl ether methacrylate,poly（2-（diethylamino）ethyl methacrylate）,and poly（ethylene oxide）,respectively.Spherical micelles were obtained through supramolecular self-assembly of these two triblock copolymers in aqueous solutions.The resultant micelles with abundant disulfide bonds could serve as soft templates and precisely accommodate gold nanoparticles in the core/shell interface as a result of the formation of Au-S bonds.

CLICK CYCLIZATION OF LINEAR TRIBLOCK COPOLYMERS AT BLOCK JUNCTIONS UNDER HIGH CONCENTRATION DUE TO END-BLOCK SHIELDING

Linear triblock copolymers of poly（N-isopropylacrylamide） （PNIPAM） and poly（ethylene glycol） （PEG） with two azide groups at both block junctions （PNIPAM-N3-PEG-N3-PNIPAM） are click reacted with dipropargyl oxalylate under high polymer concentration （250 g/L）. Benefiting from rapid feature of alkyne-azide click reaction and spatial shielding of PNIPAM end blocks, PEG center block of PNIPAM-N3-PEG-N3-PNIPAM remains separated although PNIPAM end blocks keep in contact under this high concentration. Therefore, PNIPAM-N3-PEG-N3-PNIPAM undergoes self-cyclization at block junctions to form tadpole-shaped architecture while N3-PEG-N3 without PNIPAM end blocks inter-connects linearly. The influence of block lengths of PEG and PNIPAM on the unusual cyclization under high polymer concentration is studied.

Safety-enhanced Polymer Electrolytes with High Ambient-temperature Lithium-ion Conductivity Based on ABA Triblock Copolymers

Liquid electrolytes used in lithium-ion batteries suffer from leakage,flammability,and lithium dendrites,making polymer electrolyte a potential alternative.Herein,a series of ABA triblock copolymers(ABA-x)containing a mesogen-jacketed liquid crystalline polymer(MJLCP)with a polynorbornene backbone as segment A and a second polynorbornene-based polymer having poly(ethylene oxide)(PEO)side chains as segment B were synthesized through tandem ring-opening metathesis polymerizations.The block copolymers can self-assemble into ordered morphologies at 200℃.After doping of lithium salts and ionic liquid(IL),ABA-x self-assembles into cylindrical structures.The MJLCP segments with a high glass transition temperature and a stable liquid crystalline phase serve as physical crosslinking points,which significantly improve the mechanical performance of the polymer electrolytes.The ionic conductivity of ABA-x/lithium salt/IL is as high as 10-3 S·cm-1 at ambient temperature owing to the high IL uptake and the continuous phase of conducting PEO domains.The relationship between ionic conductivity and temperature fits the Vogel-Tamman-Fulcher(VTF)equation.In addition,the electrolyte films are flame retardant owing to the addition of IL.The polymer electrolytes with good safety and high ambient-temperature ionic conductivity developed in this work are potentially useful in solid lithium-ion batteries.

Studies on the Adsorption of Asymmetrical Triblock Copolymers by Scheutjens-Fleer Theory and Monte Carlo Simulation

The adsorption of asymmetrical triblock copolymers from a non-selective solvent on solid surface has been studied by using Scheutjens-Fleer mean-field theory and Monte Carlo simulation method on lattice model. The main aim of this paper is to provide detailed computer simulation data, taking A8-kB20Ak as a key example, to study the influence of the structure of copolymer on adsorption behavior and make a comparison between MC and SF re-sults. The simulated results show that the size distribution of various configurations and density-profile are depend-ent on molecular structure and adsorption energy. The molecular structure will lead to diversity of adsorption be-havior. This discrepancy between different structures would be enlarged for the surface coverage and adsorption amount with increasing of the adsorption energy. The surface coverage and the adsorption amount as well as the bound fraction will become larger as symmetry of the molecular structure becomes gradually worse. The adsorption layer becomes thicker with increasing of symmetry of the molecule when adsorption energy is smaller but it becomes thinner when adsorption energy is higher. It is shown that SF theory can reproduce the adsorption behavior of asymmetrical triblock copolymers. However, systematic discrepancy between the theory and simulation still exists. The approximations inherited in the mean-filed theory such as random mixing and the allowance of direct back folding may be responsible for those deviations.

Enhanced stability of nitrogen-doped carbon-supported palladium catalyst for oxidative carbonylation of phenol

Enhancing the stability of supported noble metal catalysts emerges is a major challenge in both science and industry.Herein,a heterogeneous Pd catalyst(Pd/NCF)was prepared by supporting Pd ultrafine metal nanoparticles(NPs)on nitrogen-doped carbon;synthesized by using F127 as a stabilizer,as well as chitosan as a carbon and nitrogen source.The Pd/NCF catalyst was efficient and recyclable for oxidative carbonylation of phenol to diphenyl carbonate,exhibiting higher stability than Pd/NC prepared without F127 addition.The hydrogen bond between chitosan(CTS)and F127 was enhanced by F127,which anchored the N in the free amino group,increasing the N content of the carbon material and ensuring that the support could provide sufficient N sites for the deposition of Pd NPs.This process helped to improve metal dispersion.The increased metal-support interaction,which limits the leaching and coarsening of Pd NPs,improves the stability of the Pd/NCF catalyst.Furthermore,density functional theory calculations indicated that pyridine N stabilized the Pd^(2+)species,significantly inhibiting the loss of Pd^(2+)in Pd/NCF during the reaction process.This work provides a promising avenue towards enhancing the stability of nitrogen-doped carbon-supported metal catalysts.

Self-assembly of block copolymers grafted onto a flat substrate:Recent progress in theory and simulations

Block copolymers are a class of soft matter that self-assemble to form ordered morphologies on the scale of nanome- ters, making them ideal materials for various applications. These applications directly depend on the shape and size of the self-assembled morphologies, and hence, a high degree of control over the self-assembly is desired. Grafting block copolymer chains onto a substrate to form copolymer brushes is a versatile method to fabricate functional surfaces. Such surfaces demonstrate a response to their environment, i.e., they change their surface topography in response to different external conditions. Furthermore, such surfaces may possess nanoscale patterns, which are important for some applica- tions; however, such patterns may not form with spun-cast films under the same condition. In this review, we summarize the recent progress of the self-assembly of block copolymers grafted onto a flat substrate. We mainly concentrate on the self-assembled morphologies of end-grafted AB dibloek eopolymers, junction p0int-grafted AB diblock copolymers （i.e., Y-shaped brushes）, and end-grafted ABA triblock copolymers. Special emphasis is placed on theoretical and simulation progress.

SELF ASSEMBLY OF ABC TRIBLOCK COPOLYMER THIN FILMS ON A BRUSH-COATED SUBSTRATE

Self assemblies of ABC triblock copolymer thin films on a densely brush-coated substrate were investigated by using the self-consistent field theory.The middle block B and the coated polymer form one phase and the alternating phase A and phase C occur when the film is very thin either for the neutral or selective hard surface(which is opposite to the brushcoated substrate).The lamellar phase is stable on the hard surface when it is neutral and interestingly,the short block tends to stay on this hard surface...

Effect of Poly(ε-caprolactone-b-tetrahydrofuran)Triblock Copolymer Concentration on Morphological,Thermal and Mechanical Properties of Immiscible PLA/PCL Blends

In this study a low molecular weight triblock copolymer derived fromε-caprolactone and tetrahydrofuran was used as a non-reactive compatibilizer of immiscible PLA/PCL blends.Ternary blends with 0,1.5 wt%,3 wt%and 5 wt% copolymer and about 75 wt%PLA were prepared by single screw extrusion and characterized by scanning electron microscopy(SEM),differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),tensile and Izod impact testing.SEM micrographs showed that the size of the dispersed PCL domains was practically constant regardless of copolymer concentration.This result can be explained by the low shear rate employed during processing step and a decrease of PCL viscosity by presence of the triblock copolymer.However,when the copolymer concentration increased,strain at break of PLA/PCL blends also increased.PLA/PCL blend with 0 wt% copolymer presented 2%strain at break,whereas PLA/PCL blend with 5 wt%copolymer exhibited 90%.

Electrorheological Properties of Suspensions of PAn-PEO-PAn Triblock Copolymer Particles

The PAn-PEO-PAn triblock copolymer with the PEG chain length of 400 was synthesized by chemical oxidation copolymerization of aniline and α,ω-bis（p-aminophenyl）poly（ethylene glycol）and characterized by FT-IR and TEM.The experimental results show that the copolymer particles are of μtypical core-shell structure after the self-assembly process in water.Its conductivity is much lower than that of the pure PAn.The suspension containing 20 vol% PAn-PEO-PAn tiblock copolymer in silicone oil exhibits.a typical electrorheological （ER） effect in DC electric field.while it shows a lower leakage current density than that of the pure PAn-based ER fluids.Therefore,the PEO shell hinders the electric hop among PANI chains and decreases the current density of ER fluids in an external electric field.at the same time the interface polarity improves the ER effects.