Calculation of moderator analogues for 14 MeV neutrons as source were made at a IBM/PC AT computer using TAMAKER-ANISN program and 46 groups (25 neutron groups, 21 photon groups) UW cross section data. The intensifyin...Calculation of moderator analogues for 14 MeV neutrons as source were made at a IBM/PC AT computer using TAMAKER-ANISN program and 46 groups (25 neutron groups, 21 photon groups) UW cross section data. The intensifying effect of lead and natural uranium for moderating 14 MeV neutrons is confirmed. Adopting proper structure of the moderator, the intensifying factor M (times) may be larger than 3. Using lead and natural uranium in sub-critical assemblies (or call boosters),with 14 MeV neutrons as source, with the same dimension as that of above, the intensifying effect is also condrmed. With a proper structure of sub-critical assembly,the intensifying factor M may be close to or eved larger than (1 - k)-1 where k isthe effective multiplication factor.展开更多
The quality of micro heat pipe(MHP) is strongly affected by sealing technology. Based on the analysis of requirements of sealing technology, a cold welding technology was presented to seal MHP. In the cold welding pro...The quality of micro heat pipe(MHP) is strongly affected by sealing technology. Based on the analysis of requirements of sealing technology, a cold welding technology was presented to seal MHP. In the cold welding process, compression force was used to flatten micro groove copper(MGC) tube. Then the bonding of MGC tube was reached because of intensively plastic deformation of MGC tube under pressure. It is found that the plastic deformation area of the cold welding of MGC tube can be divided into three sections. The deformation of micro grooves in each section was investigated; the influence of the dimensions of cylindrical heads on the weld joint shape and strength was studied; and a comparison between smooth copper tube and MGC tube was done. The results show that a groove compression stage exists in the cold welding of MGC tube besides a flattened stage and a melting stage.展开更多
文摘Calculation of moderator analogues for 14 MeV neutrons as source were made at a IBM/PC AT computer using TAMAKER-ANISN program and 46 groups (25 neutron groups, 21 photon groups) UW cross section data. The intensifying effect of lead and natural uranium for moderating 14 MeV neutrons is confirmed. Adopting proper structure of the moderator, the intensifying factor M (times) may be larger than 3. Using lead and natural uranium in sub-critical assemblies (or call boosters),with 14 MeV neutrons as source, with the same dimension as that of above, the intensifying effect is also condrmed. With a proper structure of sub-critical assembly,the intensifying factor M may be close to or eved larger than (1 - k)-1 where k isthe effective multiplication factor.
基金Projects(50436010, 50705031) supported by the National Natural Science Foundation of ChinaProjects(07118064, 8151064101000058) supported by the Natural Science Foundation of Guangdong Province, China
文摘The quality of micro heat pipe(MHP) is strongly affected by sealing technology. Based on the analysis of requirements of sealing technology, a cold welding technology was presented to seal MHP. In the cold welding process, compression force was used to flatten micro groove copper(MGC) tube. Then the bonding of MGC tube was reached because of intensively plastic deformation of MGC tube under pressure. It is found that the plastic deformation area of the cold welding of MGC tube can be divided into three sections. The deformation of micro grooves in each section was investigated; the influence of the dimensions of cylindrical heads on the weld joint shape and strength was studied; and a comparison between smooth copper tube and MGC tube was done. The results show that a groove compression stage exists in the cold welding of MGC tube besides a flattened stage and a melting stage.
