High-Power Raman Soliton Generation at 1.7 μm in All-Fiber Polarization-Maintaining Erbium-Doped Amplifier

An all-fiber polarization maintaining high-power laser system operating at 1.7 μm based on the Ramaninduced soliton self-frequency shifting effect is demonstrated. The entirely fiberized system is built by erbiumdoped oscillator and two-stage amplifiers with polarization maintaining commercial silica fibers and devices, which can provide robust and stable soliton generation. High-power soliton laser with the average power of 0.28 W,the repetition rate of 42.7 MHz, and pulse duration of 515 fs is generated directly from the main amplifier.Our experiment provides a feasible method for high-power all-fiber polarization maintaining femtosecond laser generation working at 1.7 μm.

Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells:Experimental and numerical study

Solid oxide fuel cells(SOFCs)have attracted a great deal of interest because they have the highest efficiency without using any noble metal as catalysts among all the fuel cell technologies.However,traditional SOFCs suffer from having a higher volume,current leakage,complex connections,and difficulty in gas sealing.To solve these problems,Rolls-Royce has fabricated a simple design by stacking cells in series on an insulating porous support,resulting in the tubular segmented-in-series solid oxide fuel cells(SIS-SOFCs),which achieved higher output voltage.This work systematically reviews recent advances in the structures,preparation methods,perform-ances,and stability of tubular SIS-SOFCs in experimental and numerical studies.Finally,the challenges and future development of tubular SIS-SOFCs are also discussed.The findings of this work can help guide the direction and inspire innovation of future development in this field.

Broadband Dual-Input Doherty Power Amplifier Design Based on a Simple Adaptive Power Dividing Ratio Function

In this paper,a simple adaptive power dividing function for the design of a dual-input Doherty power amplifier(DPA)is presented.In the presented approaches,the signal separation function(SSF)at different frequency points can be characterized by a polynomial.And in the practical test,the coefficients of SSF can be determined by measuring a small number of data points of input power.Same as other dualinput DPAs,the proposed approach can also achieve high output power and back-off efficiency in a broadband operation band by adjusting the power distribution ratio flexibly.Finally,a 1.5-2.5 GHz highefficiency dual-input Doherty power amplifier is implemented according to this approach.The test results show that the peak power is 48.6-49.7d Bm,and the 6-d B back-off efficiency is 51.0-67.0%,and the saturation efficiency is 52.4-74.6%.The digital predistortion correction is carried out at the frequency points of 1.8/2.1GHz,and the adjacent channel power ratio is lower than-54.5d Bc.Simulation and experiment results can verify the effectiveness and correctness of the proposed method.

Tubular Heat Enhancement Using Twisted Tape Inserts with Large Holes

Heat augmentation techniques play a vital role in the heating and cooling processes in industries,including solar collectors and many applications that utilize heat exchangers.Several studies are based on inserting fillers inside the tubes to enhance heat transfer.This investigation considered the effects of twisted tapes with large holes on a tubular heat exchanger’s(HX)heat transmission,pressure drop,and thermal boosting factor.In the experimental section,counter-swirl flow generators used twisted tapes with pairs of 1.0 cm-diameter holes and changes in porosity(Rp)at 1.30%and 2.70%.In the experiments,air was utilized as a working fluid in a tube with a circular cross-section.The turbulent flow was considered,with Reynolds numbers(Re)domain from 4800 to 9500,and a boundary condition with a uniform wall heat flux was constructed.The findings expound that when the number of holes rose,the Nusselt number(Nu),the factor of friction(f),and the thermal enhancement factor(η)all increased as well.Additionally,as the friction factor increased,the Nusselt number of the tape-equipped tube was noticeably higher.Additionally,it was discovered that the friction factor was between 70%and 94%lower than the values of the tube without tape,while the(Nu)was between 87%and 97%higher than the conventional tube values.The maximum value ofηis 89%.According to the experimental results,empirical correlations for Nu,f,andηwere also generated.

Harmonic balance simulation of the influence of component uniformity and reliability on the performance of a Josephson traveling wave parametric amplifier

A Josephson traveling wave parametric amplifier(JTWPA),which is a quantum-limited amplifier with high gain and large bandwidth,is the core device of large-scale measurement and control systems for quantum computing.A typical JTWPA consists of thousands of Josephson junctions connected in series to form a transmission line and hundreds of shunt LC resonators periodically loaded along the line for phase matching.Because the variation of these capacitors and inductors can be detrimental to their high-frequency characteristics,the fabrication of a JTWPA typically necessitates precise processing equipment.To guide the fabrication process and further improve the design for manufacturability,it is necessary to understand how each electronic component affects the amplifier.In this paper,we use the harmonic balance method to conduct a comprehensive study on the impact of nonuniformity and fabrication yield of the electronic components on the performance of a JTWPA.The results provide insightful and scientific guidance for device design and fabrication processes.

Three-channel CMOS transimpedance amplifier for LiDAR sensor receiver

For time-of-flight(TOF)light detection and ranging(LiDAR),a three-channel high-performance transimpedance amplifier(TIA)with high immunity to input load capacitance is presented.A regulated cascade(RGC)as the input stage is at the core of the complementary metal oxide semiconductor(CMOS)circuit chip,giving it more immunity to input photodiode detectors.A simple smart output interface acting as a feedback structure,which is rarely found in other designs,reduces the chip size and power consumption simultaneously.The circuit is designed using a 0.5μm CMOS process technology to achieve low cost.The device delivers a 33.87 dB?transimpedance gain at 350 MHz.With a higher input load capacitance,it shows a-3 dB bandwidth of 461 MHz,indicating a better detector tolerance at the front end of the system.Under a 3.3 V supply voltage,the device consumes 5.2 mW,and the total chip area with three channels is 402.8×597.0μm2(including the test pads).

Synthetic plasma and silicon tubular harness-based purebiological transistor amplifier circuit

Dear Editor:Kosta et al.;first ever reported the development of biologic electronic components viz resistance R,capacitance C,diode D and transistor T using human tissues and human skin.In our early study;,we have demonstrated the feasibility of liquid medium（synthetic blood plasma）to develop bio-transistor,bio-resistor,and bio-capacitor and combined them to form an amplifier using the metallic harness(the interconnecting

5G Wideband Bandpass Filtering Power Amplifiers Based on a Bandwidth-Extended Bandpass Matching Network

In this paper,a 5G wideband power amplifier(PA)with bandpass filtering response is synthesized using a bandwidth-extended bandpass filter as the matching network(MN).In this structure,the bandwidth(θ_(C))is defined as a variable in the closedform equations provided by the microstrip bandpass filter.It can be extended over a wide range only by changing the characteristic impedances of the structure.Different from the other wideband MNs,the extension of bandwidth does not increase the complexity of the structure(order n is fixed).In addition,based on the bandwidth-extended structure,the wideband design of bandpass filtering PA is not limited to the fixed bandwidth of the specific filter structure.The theoretical analysis of the MN and the design flow of the PA are provided in this design.The fabricated bandpass filtering PA can support almost one-octave bandwidth(2-3.8 GHz),covering the two 5G bands(n41 and n78).The drain efficiency of 47%-60%and output power higher than 40 dBm are measured.Good frequency selectivity in S-parameter measurements can be observed.

Design and performance of a high-speed and low-noise preamplifier for SiPM

Considering the R&D for upgrading the K^(0)_(L) andμdetectors in the Belle II experiment using a scintillator and silicon pho-tomultiplier(SiPM),we designed a compact high-speed and low-noise preamplifier.The preamplifier demonstrated a good gain stability,bandwidth of 426 MHz,baseline noise level ofσ≈0.6 mV,dynamic range of up to170 mV of the input signal amplitude,good time resolution of 20 ps,and it can be comprehensively applied to SiPMs.Adopting pole-zero-cancelation in the preamplifier reduces both the rise and fall times of the SiPM signal,which can significantly improve the time resolution and reduce the pile-up when using a large SiPM or an array of SiPMs.Various combinations of the preamplifier and several types of SiPMs demonstrated time resolutions better than 50 ps for most cases;when the number of detected photons was larger than 60,a time resolution of approximately 25 ps was achieved.

Self-assembly synthesis of phosphorus-doped tubular g-C_(3)N_(4);Ti_(3)C_(2)MXene Schottky junction for boosting photocatalytic hydrogen evolution

Establishing highly effective charge transfer channels in carbon nitride(g-C_(3)N_(4)) to enhance its photocatalytic activity is still a challenging issue.Herein,the delaminated 2D Ti_(3)C_(2) MXene nanosheets were employed to decorate the P-doped tubular g-C_(3)N_(4)(PTCN)for engineering 1D/2D Schottky heterojunction(PTCN/TC)through electrostatic self-assembly.The optimized PTCN/TC exhibited the highest hydrogen evolution rate(565 μmol h^(-1)g^(-1)),which was 4.3 and 2.0-fold higher than pristine bulk g-C_(3)N_(4) and PTCN,respectively.Such enhancement may be primarily attributed to the phosphorus heteroatom doped and unique structure of 1D/2D g-C_(3)N_(4)/Ti_(3)C_(2) Schottky heterojunction,enhancing the light-harvesting and charges’separation.One-dimensional pathway of g-C_(3)N_(4) tube and built-in electric field of interfacial Schottky effect can significantly facilitate the spatial separation of photogenerated charge carriers,and simultaneously inhibit their recombination via Schottky barrier.In this composite,metallic Ti_(3)C_(2) was served as electrons sink and photons collector.Moreover,ultrathin Ti_(3)C_(2) flake with exposed terminal metal sites as a co-catalyst exhibited higher photocatalytic reactivity in H2 evolution compared to carbon materials(such as reduced graphene oxide).This work not only proposed the mechanism of tubular g-C_(3)N_(4)/Ti_(3)C_(2) Schottky junction in photocatalysis,but also provided a feasible way to load ultrathin Ti_(3)C_(2) as a co-catalyst for designing highly efficient photocatalysts.

Impact of amplified spontaneous emission noise on the SRS threshold of high-power fiber amplifiers

Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.

Albumin-bound kynurenic acid is an appropriate endogenous biomarker for assessment of the renal tubular OATs-MRP4 channel

Renal tubular secretion mediated by organic anion transporters(OATs)and the multidrug resistanceassociated protein 4(MRP4)is an important means of drug and toxin excretion.Unfortunately,there are no biomarkers to evaluate their function.The aim of this study was to identify and characterize an endogenous biomarker of the renal tubular OATs-MRP4 channel.Twenty-six uremic toxins were selected as candidate compounds,of which kynurenic acid was identified as a potential biomarker by assessing the protein-binding ratio and the uptake in OAT1-,OAT3-,and MRP4-overexpressing cell lines.OAT1/3 and MRP4 mediated the transcellular vectorial transport of kynurenic acid in vitro.Serum kynurenic acid concentration was dramatically increased in rats treated with a rat OAT1/3(rOAT1/3)inhibitor and in rOAT1/3 double knockout(rOAT1/3^(-/-))rats,and the renal concentrations were markedly elevated by the rat MRP4(rMRP4)inhibitor.Kynurenic acid was not filtered at the glomerulus(99%of albumin binding),and was specifically secreted in renal tubules through the OAT1/3-MRP4 channel with an appropriate affinity(Km)(496.7 mM and 382.2 mM for OAT1 and OAT3,respectively)and renal clearance half-life(t1/2)in vivo(3.7±0.7 h).There is a strong correlation in area under the plasma drug concentration-time curve(AUC0et)between cefmetazole and kynurenic acid,but not with creatinine,after inhibition of rOATs.In addition,the phase of increased kynurenic acid level is earlier than that of creatinine in acute kidney injury process.These results suggest that albumin-bound kynurenic acid is an appropriate endogenous biomarker for adjusting the dosage of drugs secreted by this channel or predicting kidney injury.

Dynamic Analysis and Parametric Optimization of Telescopic Tubular Mast Applied on Solar Sail

Large-scale solar sails can provide power to spacecraft for deep space exploration.A new type of telescopic tubular mast(TTM)driven by a bistable carbon fiber-reinforced polymer tube was designed in this study to solve the problem of contact between the sail membrane and the spacecraft under light pressure.Compared with the traditional TTM,it has a small size,light weight,high extension ratio,and simple structure.The anti-blossoming and self-unlocking structure of the proposed TTM was described.We aimed to simplify the TTM with a complex structure into a beam model with equal linear mass density,and the simulation results showed good consistency.The dynamic equation was derived based on the equivalent model,and the effects of different factors on the vibration characteristics of the TTM were analyzed.The performance parameters were optimized based on a multiobjective genetic algorithm,and prototype production and load experiments were conducted.The results show that the advantages of the new TTM can complete the deployment of large-scale solar sails,which is valuable for future deep space exploration.

ELABELA protects against diabetic kidney disease by activating high glucose-inhibited renal tubular autophagy

ELABELA(ELA),an endogenous ligand of the apelin receptor(also known as apelin peptide jejunum[APJ]),has been shown to decrease in the plasma of patients with diabetic kidney disease(DKD).In the current study,we explored the potential function as well as the underlying mechanisms of ELA in DKD.We first found that the ELA levels were decreased in the kidneys of DKD mice.Then,we found that ELA administration mitigated renal damage and downregulated the expression of fibronectin,collagenⅣ,and transforming growth factor-β1 in the db/db mice and the high glucose cultured HK-2 cells.Furthermore,the autophagy markers,Beclin-1 and LC3-Ⅱ/LC3-Ⅰratio,were significantly impaired in DKD,but the ELA treatment reversed these alterations.Mechanistically,the inhibitory effects of ELA on the secretion of fibrosis-associated proteins in high glucose conditions were blocked by pretreatment with 3-methyladenine(an autophagy inhibitor).In summary,these in vivo and in vitro results demonstrate that ELA effectively protects against DKD by activating high glucose-inhibited renal tubular autophagy,potentially serving as a novel therapeutic candidate for DKD.

Seismic behavior of steel tubular bridge columns equipped with low-yield-point steel plates in the root replaceable pier

To enable rapid recovery of a steel bridge column after an earthquake,a novel tubular-section steel bridge column equipped with low-yield-point(LYP)steel tubular plates in the root replaceable pier is proposed.For the purpose of discussing the seismic behavior of the novel steel bridge column,quasi-static tests and finite element simulation analyses of the specimens were carried out.The effects of parameters such as the axial compression ratio,eccentricity,and thickness and material strength of the tubular plate in the energy-dissipating zone are discussed.Experimental results from seven specimens that were subjected to four failure modes are presented.The damage to the quasi-static specimens is localized to the replaceable energy-dissipating pier.The seismic behavior of the novel steel bridge columns is significantly influenced by the axial compression ratio and eccentricity of specimens.Numerical results show that the high stress area of the specimens is mainly concentrated in the connection zone between the LYP steel tubular plate and the bottom steel plate,which is consistent with the position of the quasi-static specimen when it was prone to fracture.Finally,a calculation formula is proposed to facilitate the capacity prediction of this new steel tubular bridge column under repeated loading.

Compressive Strength of Tubular Members with Combined Pitting Corrosion and Crack Damage

Tubular members subject to combined pitting corrosion and crack damage were numerically studied to clarify the reduction of ultimate strength and failure behavior,based on numerical models validated against available experi-ments.The effects of length,location and inclined angle of a crack under combined damage were studied to disclose the mechanism of interaction between the crack and corrosion pits.The methods,named as linear superposition directly accumulating the effects of solo crack and solo pitting damage,as well as crack projection transferring an inclined crack to a transverse one,were discussed and verified in the view of assessing ultimate strength of tubular members with combined damage.It was shown that the former is practical but complex while the next always over-estimates the residual strength.Besides,the location and inclined angle of a crack have a subtle effect on the reduction of ultimate strength under combined damage,especially at higher level of pitting damage,due to the synergistic effect between corrosion pits and cracks.Such effect can lead to early occurrence of plasticity and local buckling by inducing stress interaction between crack tips and pits,and causing more significant strength reduction compared with a solo type of damage.A practical method was proposed to determine the loss ratio of cross-sectional area on the equivalent weakest section of a damaged member.Based on the loss ratio,a formula was presented to predict the ultimate strength of damaged members with combined damage,showing good applicability.

Clinical, Etiological and Progressive Aspects of Acute Tubular Necrosis of Toxic Origin at the Brazzaville University Hospital Center

Background and Objectives: Acute tubular necrosis (ATN) is the second cause of acute kidney injury (AKI) in an intra-hospital environment. The toxic origin is avoidable. Our objectives were to determine the toxic substances at the origin of ATN at the Brazzaville University Hospital and determine the evolving aspects and the factors associated with it. Patients and Methods: We carried out a 12-month from June 20, 2022 to June 30, 2023. It was a prospective observational study in the Nephrology Department of Brazzaville University Hospital Center. The diagnosis of ATN was done in the presence of AKI occurring in the context of taking nephrotoxic substances with negative albuminuria. Cases of ATN aggravating CKD were excluded. Data analysis was done with Epi-Info 7.2 software. Results: We identified 63 cases of AKI on toxic ATN. Their average age was 47 ± 19 years with a male predominance of 60.2%. The 3 main toxicants incriminated were: herbal medicine (49.2%), Gentamycin (17.5%) and non-steroidal anti-inflammatory drugs (14.3%). An indication for hemodialysis was made in 43 patients (68.2%), the evolution was marked by a cure in 29 patients (46.1%), 10 (15.9%) became chronic kidney failure, 19 (30.1%) died, 5 (7.9%) were lost to follow-up. The main factor for non-healing is anuria (p Conclusion: The main cause of toxic ATN at Brazzaville University Hospital is herbal medicine. The death rate is high there.

Improving source-in-the-middle continuous-variable quantum key distribution using a heralded hybrid linear amplifier

A hybrid linear amplifier is inserted at the output of the source-in-the-middle distribution protocol to overcome the shortcomings of the transmission distance.The modified protocol aims to maintain a high key rate for long-distance transmission under high noise.It has the potential to significantly broaden the application range of the continuous variable quantum key distribution protocol.The effects of amplifier parameters and noise on the modified protocol are analyzed in detail with regard to applying it to a practical system.To make the simulation more realistic,the effect of finite size on the new protocol is taken into account.It will serve as a guideline for the future use of hybrid linear amplifiers.Different parameters can be adjusted to achieve the best performance for key rates of different quantum channels.

Piezomagnetic vibration energy harvester with an amplifier

We study the effect of an amplification mechanism in a nonlinear vibration energy harvesting system where a ferromagnetic beam resonator is attached to the vibration source through an additional linear spring with a damper.The beam moves in the nonlinear double-well potential caused by interaction with two magnets.The piezoelectric patches with electrodes attached to the electrical circuit support mechanical energy transduction into electrical power.The results show that the additional spring can improve energy harvesting.By changing its stiffness,we observed various solutions.At the point of the optimal stiffness of the additional spring,the power output is amplified a few times depending on the excitation amplitude.

Decreased TRPM7 alleviates high glucose-induced renal tubular epithelial cell injury by inhibiting the HMGB1/TLR4 signaling pathway

Objective:To explore the regulatory mechanism of transient receptor potential melastatin-7(TRPM7)in high glucose-induced renal tubular epithelial cell injury.Methods:The expression of TRPM7 in the serum of diabetic nephropathy patients and high glucose-induced HK-2 cells was detected by RT-qPCR.Then,the TRPM7 interference vector was constructed,and the downstream high mobility group box 1(HMGB1)/Toll-like receptor 4(TLR4)signaling pathway proteins were detected.Next,in addition to interference with TRPM7 expression,overexpression of HMGB1 in high glucose-induced HK-2 cells was performed.Cell activity,apoptosis,oxidative stress levels,and inflammation levels were determined by CCK8,TUNEL,Western blotting,immunofluorescence and related kits.Results:TRPM7 expression was upregulated in the serum of diabetic nephropathy patients and high glucose-induced HK-2 cells.Interference with TRPM7 reduced cell damage,epithelial-mesenchymal transition,oxidative stress,and inflammatory response in high glucose-induced HK-2 cells via inhibiting the HMGB1/TLR4 signaling pathway.However,the effects induced by TRPM7 silencing were abrogated by HMGB1 overexpression.Conclusions:Decreased TRPM7 alleviates high glucose-induced renal tubular epithelial cell injury by inhibiting the HMGB1/TLR4 signaling pathway.Further animal experiments and clinical trials are warranted to verify its effect.