Jet formation and penetration performance of a double-layer charge liner with chemically-deposited tungsten as the inner liner

This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.

Trace elements in magmatic and hydrothermal quartz:Implications on the genesis of the Xingluokeng Tungsten Deposit,South China

The Xingluokeng deposit is the largest gran-ite-related tungsten deposit within the Wuyi metallogenic belt in South China.The Xingluokeng intrusion primarily consists of porphyritic biotite granite,biotite granite,andfine-grained granite.The deposit is represented by veinlet-disseminated mineralization with K-feldspathization and biotitization,alongside quartz-vein mineralization with gre-isenization and sericitization.This study investigates in-situ analyses of quartz compositions from both the intrusion and hydrothermal veinlets and veins.Trace element correlations indicate that trivalent Al^(3+)and Fe^(3+)replace Si^(4+)within the quartz lattice,with monovalent cations(such as Li^(+),Na^(+),and K^(+))primarily serving as charge compensators.Low Ge/Al ratios(<0.013)of quartz from granites suggest a mag-matic origin.The low Al/Ti and Ge/Ti ratios,accompanied by high Ti contents in quartz,suggest that the porphyritic biotite granite and biotite granite are characterized by rela-tively low levels of differentiation and high crystallization temperatures.In contrast,thefine-grained granite exhibits a higher degree of fractionation,lower crystallization tem-peratures,and a closer association with tungsten miner-alization.Ti contents in quartz from quartz veins indicate Qz-Ⅰformed at temperatures above 400°C,while Qz-Ⅱto Qz-Ⅴformed at temperatures below 350°C.Variations in different generations of quartz,as indicated by Al content and(Al+Fe)/(Li+Na+K)ratio,suggest that Qz-Ⅰprecipi-tated from a less acidicfluid with a stable pH,whereas Qz-Ⅱto Qz-Ⅴoriginated from a more acidicfluid with notable pH variations.Consequently,alkaline alteration and acidic alteration supplied the essential Ca and Fe for the precipita-tion of scheelite and wolframite,respectively,highlighting a critical mechanism in tungsten mineralization at the Xin-gluokeng deposit.

Simulation of tungsten impurity transport by DIVIMP under different divertor magnetic configurations on HL-3

Tungsten(W)accumulation in the core,depending on W generation and transport in the edge region,is a severe issue in fusion reactors.Compared to standard divertors(SDs),snowflake divertors(SFDs)can effectively suppress the heat flux,while the impact of magnetic configurations on W core accumulation remains unclear.In this study,the kinetic code DIVIMP combined with the SOLPS-ITER code is applied to investigate the effects of divertor magnetic configurations(SD versus SFD)on W accumulation during neon injection in HL-3.It is found that the W concentration in the core of the SFD is significantly higher than that of the SD with similar total W erosion flux.The reasons for this are:(1)W impurities in the core of the SFD mainly originate from the inner divertor,which has a short leg,and the source is close to the divertor entrance and upstream separatrix.Furthermore,the W ionization source(S_(W0))is much stronger,especially near the divertor entrance.(2)The region overlap of S_(W0)and F_(W,TOT)pointing upstream promote W accumulation in the core.Moreover,the influence of W source locations at the inner target on W transport in the SFD is investigated.Tungsten impurity in the core is mainly contributed by target erosion in the common flux region(CFR)away from the strike point.This is attributed to the fact that the W source at this location enhances the ionization source above the W ion stagnation point,which sequentially increases W penetration.Therefore,the suppression of far SOL inner target erosion can effectively prevent W impurities from accumulating in the core.

Fabrication and characterization of tungsten-containing mesoporous silica for heterogeneous oxidative desulfurization

A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and metal source respectively.These materials were then characterized through X-ray diffraction（XRD）,transmission electron microscopy（TEM）,Raman spectroscopy,Fourier transform infrared spectra（FTIR）,diffuse reflectance spectra（DRS）,and N2 adsorption-desorption,which were found to contain tungsten species that were effectively dispersed throughout the structure.The as-prepared materials W-SiO2 were also found to possess a mesoporous structure.The pore diameters of the respective sample W-SiO2-20 determined from the TEM images ranged from 2 to 4 nm,which was close to the average pore size determined from the nitrogen desorption isotherm（2.9 nm）.The materials were evaluated as catalysts for the heterogeneous oxidative desulfurization of dibenzothiophene（DBT）,which is able to achieve deep desulfurization within 40 min under the optimal conditions（Catalyst（W-SiO2-20）= 0.01 g,temperature = 60℃,oxidant（H2O2）= 20 μL）.For the removal of different organic sulfur compounds within oil,the ability of the catalyst（W-SiO2-20） under the same conditions to remove sulfur compounds decreased in the order：4,6-dimethyldibenzothiophene Dibenzothiophene Benzothiophene 1-dodecanethiol.Additionally,they did not require organic solvents as an extractant in the heterogeneous oxidative desulfurization process.After seven separate catalytic cycles,the desulfurization efficiency was still as high as 90.3%.From the gas chromatography-mass spectrometer analysis,DBT was entirely oxidized to its corresponding sulfone DBTO2 after reaction.A mechanism for the heterogeneous desulfurization reaction was proposed.

Tungsten/steel diffusion bonding using Cu/W-Ni/Ni multi-interlayer

Diffusion bonding between tungsten and 0Cr13Al stainless steel using a Cu/90W-10Ni powder mixtures/Ni multi-interlayer was carried out in vacuum at 1150 °C with a pressure of 5 MPa for 60 min. The microstructures, composition distribution and fracture characteristics of the joint were studied by SEM and EDS. Joint properties were evaluated by shear experiments and thermal shock tests. The results showed that the joints comprised tungsten/Cu-Ni sub-layer/W-Ni composites sub-layer/Ni sub-layer/0Cr13Al stainless steel. The W-Ni composites sub-layer with a homogeneous and dense microstructure was formed by solid phase sintering of 90W-10Ni powder mixtures. Sound bonding between tungsten base material and W-Ni composites sub-layer was realized based on transient liquid phase (TLP) diffusion bonding mechanism. Joints fractured at bonding zone of W-Ni composites sub-layer and Ni sub-layer during shear testing, and the average strength was 256 MPa. Thermal shock tests showed that joints could withstood 60 thermal cycles quenching from 700 °C to room temperature.

Evaluation of ultra-fine grained tungsten under transient high heat flux by high-intensity pulsed ion beam

Pure tungsten, oxide dispersion strengthened tungsten and carbide dispersion strengthened tungsten were fabricated by high-energy ball milling and spark plasma sintering process. In order to evaluate the properties of the tungsten alloys under transient high heat flues, four tungsten samples with different grain sizes were tested by high-intensity pulsed ion beam with a heat flux as high as 160 MW/（m^2·s^-1/2）. Compared with the commercial tungsten, the surface modification of the oxide dispersion strengthened tungsten by high-intensity pulsed ion beam is completely different. The oxide dispersion strengthened tungsten shows inferior thermal shock response due to the low melting point second phase of Ti and Y2O3, which results in the surface melting, boiling bubbles and cracking. While the carbide dispersion strengthened tungsten shows better thermal shock response than the commercial tungsten.

Separation of macro amounts of tungsten and molybdenum by precipitation with ferrous salt

In order to develop a low-cost approach for separating macro amounts of Mo and W, the effects of parameters on the separation using FeSO4 as precipitation reagent were studied. The results show that the optimum reaction temperature is 10 °C, and the separation factor does not further improve after a reaction time of 7 h. Moreover, slow dropping speed of the precipitation reagent is beneficial for improving the separation efficiency. When the H＋/W molar ratio is below 1/1, the addition of acid to a neutral solution is favorable to the separation. For the solution with an ammonium concentration below 3 mol/L, the separation factor is high due to the high W-precipitation rate. Furthermore, the method is also effective when it is applied to industrial solution containing some other impurities. All these indicate the ferrous salts have great potential for removing W from Mo on a commercial scale.

CUTTING FORCES IN HIGH SPEED TAPPING CAST IRON BY TUNGSTEN CARBIDE TAPS

The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the parameter optimization of tap structures is also correlated with the variation of tapping forces. Therefore, the study of tapping forces is necessary in developing new style taps. Several experiments about some novel carbide taps are performed on a vertical machining center by a Kistler dynamometer system in blind tapping both gray cast iron and ductile cast iron. And the variations of tapping forces are analyzed in tapping-in and tapping-out periods. It indicates that cutting forces hardly vary with the tap wear in tapping cast iron. Contrarily, tapping forces are closely correlated with the holding method. Besides, it also depends on the helix angle, the flute numbers and the plasticity of the work material to some extent.

Decomposition laws of tungsten prices fluctuation since 1900 and its applications

Tungsten current price was transformed yearly to its constant price since 1900, which is roughly decomposed into four components as trend, cycle, impact and random. The core prices, consisting of the trend and the cycle, present regularities that a long-run cycle is embedded within two major cycles, and major cycle is composed of low-price period and high-price period, along with the rapid rise into a tower, and along with deep down into next trough; three sharply upward shocks occur by the events in a tower. Fluctuations in prices trend to slow cycles and expand the bands. It can be expected that tungsten price will highly stand over 17 a, and is is a advice that reducing production and restricting export maybe maintain a high price level.

Mechanical properties of tungsten nanowhiskers characterized by nanoindentation

The Mechanical properties of the hexagonal tungsten nanowhiskers, which were synthesized by chemical vapor deposition, were characterized by instrumented nanoindentation and atomic force microscope （AFM）. The nanoindentation results show that tungsten nanowhiskers exhibit a hardness of （6.2±1.7） GPa and an elastic modulus of （225±20） GPa. According to the comparative test results, the tungsten nanowhiskers possess a comparable hardness to tungsten microwhiskers, and an hardness increase of 35% to the bulk single-crystal tungsten. The increase in the hardness of whiskers is attributed to the lacking of dislocation avalanche observed in the bulk single-crystal tungsten. The measured modulus is about 80% that of the tungsten microwhiskers, which can be contributed to the size effects of the nanowhiskers and the substrate effects in the nanoindentation test.

Tungsten carbide-reduced graphene oxide intercalation compound as co-catalyst for methanol oxidation

Highly dispersed tungsten carbide（WC） nanoparticles（NPs） sandwiched between few-layer reduced graphene oxide（RGO） have been successfully synthesized by using thiourea as an anchoring and inducing reagent.The metatungstate ion,[H2W（12）O（40）]^6-,is assembled on thiourea-modified graphene oxide（GO） by an impregnation method.The WC NPs,with a mean diameter of 1.5 nm,are obtained through a process whereby ammonium metatungstate first turns to WS2,which then forms an intercalation compound with RGO before growing,in situ,to WC NPs.The Pt/WC-RGO electrocatalysts are fabricated by a microwave-assisted method.The intimate contacts between Pt,WC,and RGO are confirmed by X-ray diffraction,scanning electron microscope,transmission electron microscope,and Raman spectroscopy.For methanol oxidation,the Pt/WC-RGO electrocatalyst exhibited an electrochemical surface area value of 246.1 m^2/g Pt and a peak current density of1364.7 mA/mg Pt,which are,respectively,3.66 and 4.77 times greater than those of commercial Pt/C electrocatalyst（67.2 m^2/g Pt,286.0 mA/mg Pt）.The excellent CO-poisoning resistance and long-term stability of the electrocatalyst are also evidenced by CO stripping,chronoamperometry,and accelerated durability testing.Because Pt/WC-RGO has higher catalytic activity compared with that of commercial Pt/C,as a result of its intercalated structure and synergistic effect,less Pt will be required for the same performance,which in turn will reduce the cost of the fuel cell.The present method is facile,efficient,and scalable for mass production of the nanomaterials.

FABRICATION OF DLC COATED COBALT-CEMENTED TUNGSTEN CARBIDE MICRO-DRILLS AND THEIR CUTTING PERFORMANCE

In machining the particle reinforced aluminum based composite material with high Si content using the cobalt-cemented tungsten carbide micro cutting tools, diamond like carbon （DLC） films are deposited on cobalt-cemented tungsten carbide micro-drills with two-step pretreatment method. Characteristics of DLC coated tools are investigated in bias-enhanced HFCVD system with the optimized hot filament arrangement. The optimization deposition technology is obtained and the wear mechanism of cutting tools is analyzed. The drilling performance of DLC coated tools is verified by the experiments of cutting particle reinforced aluminum based composite material （Si 15% in volume） compared with uncoated ones. Experimental results show that the two-step pretreatment method is appropriate for complex shaped cemented carbide substrates and ensures the good adhesive strength between the diamond film and the substrate. The cutting performance of DLC coated tool is enhanced 10 times when machining the Si particle reinforced aluminum based metal matrix composite compared with that of uncoated ones under the same cutting conditions.

Effect of crystal orientation on tensile mechanical properties of single-crystal tungsten nanowire

Based on the high-purity single-crystal tungsten nanowire firstly prepared by the metal-catalyzed vapor-phase reaction method, molecular dynamics method was used to calculate tensile stress-strain curves and simulate microscopic deformation structures of the single-crystal tungsten nanowires with different crystal orientations of 〈100〉, 〈110〉and 〈111〉, in order to reveal the effect of crystal orientation on their tensile mechanical properties and failure mechanisms. Research results show that all of the stress-strain curves are classified into four stages： elastic stage, damage stage, yielding stage and failure stage, where 〈100〉orientation has a special hardening stage after yielding and two descending stages. The crystal orientation has little effect on elastic modulus but great effect on tensile strength, yielding strength and ductility, depending on different atomic surface energies and principal sliding planes. The calculated values of elastic modulus are in good agreement with the tested values of elastic modulus.

Effect of indentation size and grain/sub-grain size on microhardness of high purity tungsten

Hardness of materials depends significantly on the indentation size and grain/sub-grain size via microindentation and nanoindentation tests of high-purity tungsten with different structures.The grain boundary effect and indentation size effect were explored.The indentation hardness was fitted using the Nix-Gao model by considering the scaling factor.The results show that the scaling factor is barely correlated with the grain/sub-grain size.The interaction between the plastically deformed zone（PDZ） boundary and the grain/sub-grain boundary is believed to be the reason that leads to an increase of the measured hardness at the specific depths.Results also indicate that the area of the PDZ is barely correlated with the grain/sub-grain size,and the indentation hardness starts to stabilize once the PDZ expands to the dimension of an individual grain/sub-grain.

A Ballistic Limit Analytical Model of Tungsten Ball Perforating Ceramic/Aluminum Composite Target

From the experimental data on ceramic/aluminum composite target, the mechanism of tungsten ball impacting a ceramic/aluminum composite target has been studied. By analyzing the transition of energy in the process of impact, a simple ballistic limit analytical model of tungsten ball impacting a ceramic/aluminum composite target has been proposed; and the result taken from this model is consistent with that of the experiment.

A Preliminary Review of Metallogenic Regularity of Tungsten Deposits in China

Tungsten ore resources are abundant in China with relatively complete types of deposits. Skarn type and quartz vein type deposits are dominated in the tungsten resources, whereas quartz vein type wolframite deposits are most important in terms of exploitation and utilization. Skarn type tungsten deposits are concentratedly distributed in the central Nanling region, such as South Hunan, South Anhui and the eastern Qinling region, while quartz vein type tungsten deposits occur mainly in South China, such as West Fujian, South Jiangxi, North Guangdong and South Hunan. The most important metallogenic epoch of tungsten is the Mesozoic, while the metallogenic tectonic setting is featured by an intracontinental environment after orogeny with sever tectonic movements, deep-seated faults and frequent magmatic activities, especially Mesozoic granitoids closely related to tungsten-tin mineralization. 22 metallogenic series of ore deposits characterized by or significantly related to tungsten were defined based on precise statistic information of 1199 tungsten mining areas and thorough the summary of metallogenic regularities. Based on studies of the metallogenic regularity of tungsten deposits, skarn type （or greisen type）, quartz vein type and massif-type of tungsten deposits are thought to be the key prediction types. 65 tungsten-forming belts and 22 key ore concentration areas were ascertained and a distribution map of tungsten-forming belts of China was compiled, which provided a theoretical basis for evaluation and prediction of potential tungsten resources.

Deposition of tungsten-titanium carbides on surface of diamond by reactive PVD

The coatings of W-Ti carbides on the surface of diamond was obtained by using physical vapor deposition (PVD), during which WO3 powders pre-treated with hydrofluoric acid were reduced by titanium hydride in vacuum at 850 ℃. The resistance of diamond to corrosion at high-temperature was investigated. The formation of W-Ti carbides on the surface of diamond was verified by X-ray diffraction analysis, the interface state between diamond and matrix in metaLbase diamond composite was observed by scanning electron microscope. The results showed that the carbide coating is easy to be formed at low deposition temperature on the surface of diamond, while the resistance of diamond to corrosion at highutemperature and the strength of bonding between diarnond and metal matrix are effectively improved.

INDUCTION PLASMA REACTIVE DEPOSITION OF TUNGSTEN CARBIDE FROM TUNGSTEN METAL POWDER

Experimental results on the primary carburization reaction between the tungsten powder and methane in the induction plasma, and the secondary carburization of the deposit on substrate at high temperature are reported. Optical microscopy and scanning electron microscopy were used to examine the microstructures of starting tungsten powder, carburized powder, and deposit. X-ray diffraction analysis, thermal gravimetric analysis and microhardness measurement were used to characterize the structures and properties of the powder and the deposit. It is found that the primary carburization reaction in the induction plasma starts from the surface of tungsten particles when the particles are melted. Tungsten particles are partially carburized inside the reactive plasma. Complete carburization is achieved through the secondary carburization reaction of the deposit on substrate at high temperature.

Re-Os Dating of Molybdenite from the Yaogangxian Tungsten Deposit,South China,and Its Geological Significance

The Yaogangxian tungsten deposit is located in the central part of the Nanling polymetailic metallogenic province. The orebodies occur as veins. Wolframite and molybdenite are the dominant ore minerals. Two samples were selected for molybdenite Re-Os dating in order to elucidate the timing of mineralization. Re-Os datings of molybdenite from quartz-woiframite veins and disseminated in granite yield ages of 153±7 Ma and 163.2±4.2 Ma respectively. The results indicate that the Yaogangxian tungsten deposit is the product of large-scale metallogenesis in the middle Yanshanian period in South China, and that the evolution from late magmatic to postmagmatic hypothermal mineralization occurred at about 10 Ma. The rhenium content of molybdenite in the Yaogangxian tungsten deposit suggests that the ore materials originated from the crust.

LOW TEMPERATURE THERMAL DEBINDING BEHAVIOR OF WAX-BASED MULTI-COMPONENT BINDER FOR TUNGSTEN HEAVY ALLOY

１ＩＮＴＲＯＤＵＣＴＩＯＮＰｏｗｄｅｒｉｎｊｅｃｔｉｏｎｍｏｕｌｄｉｎｇ（ＰＩＭ）ｉｓａｎｅｗｐｒｏｃｅｓｓｆｏｒｍａｎｕｆａｃｔｕｒｉｎｇｎｅａｒｎｅｔｓｈａｐｅｐａｒｔｓｗｉｔｈａｄｖａｎｔａｇｅｓｏｆｌｏｗｃｏｓｔ，ｈｉｇｈｐｅｒｆｏｒｍａｎｃ...