Crystal structure,phase transitions,and thermodynamic properties of magnesium metavanadate(MgV_(2)O_(6))

As a promising anode material for magnesium ion rechargeable batteries,magnesium metavanadate(MgV_(2)O_(6))has attracted considerable research interest in recent years.A MgV_(2)O_(6)sample was synthesized via a facile solid-state reaction by multistep-firing stoichiometric mixtures of MgO and V2O5 powder under an air atmosphere.The solid-state phase transition fromα-MgV_(2)O_(6)toβ-MgV_(2)O_(6)occurred at 841 K and the enthalpy change was 4.37±0.04 kJ/mol.The endothermic effect at 1014 K and the enthalpy change was 26.54±0.26 kJ/mol,which is related to the incongruent melting ofβ-MgV_(2)O_(6).In situ XRD was performed to investigate phase transition of the as-prepared MgV_(2)O_(6)at high temperatures.The cell parameters obtained by Rietveld refinement indicated that it crystallizes in a monoclinic system with the C2/m space group,and the lattice parameters of a=9.280 A°,b=3.501 A°,c=6.731 A°,β=111.76°.The solid-state phase transition fromα-MgV_(2)O_(6)toβ-MgV_(2)O_(6)was further studied by thermal kinetics,indicating that this process is controlled first by a fibril-like mechanism and then by a spherulitic-type mechanism with an increasing heating rate.Additionally,the enthalpy change of MgV_(2)O_(6)at high temperatures was measured utilizing the drop calorimetry,heat capacity was calculated and given as:Cp=208.3+0.03583T-4809000T^(−2)(298-923 K)(J mol^(−1)K^(−1)),the high-temperature heat capacity can be used to calculate Gibbs free energy of MgV_(2)O_(6)at high temperatures.

Crystal structure transformation and lattice impurities migration of quartz during chlorine roasting

To investigate the effect of chlorine roasting on the migration and removal of trace elements in quartz lattice,firstly,an efficient pretreatment process,grinding–HCl washing–flotation–HF and HCl leaching,was used to remove the gangue minerals in quartz ore to obtain purified quartz for the preparation of high-purity quartz and the investigation of lattice impurities migration.The results showed that the high-purity quartz with total impurities less than 50μg/g could be obtained from purified quartz after being treated with chlorine at 1200°C.The variation of crystal structure and the lattice impurities migration of quartz during chlorine roasting were studied through in-situ XRD,TGA,SEM-EDS,ICP-MS,FT-IR and XPS analysis.It revealed that the decomposable impurities H_(2)O,-OH,and residual collectors in the crystal of purified quartz could be effectively removed through chlorine roasting above 900°C,which also had an obvious effect on the removal of low-valence trace elements Li,Na and K in the crystal of quartz but didn't affect the multivalent trace elements Al and Ti.This study revealed the removal and migration mechanism of the trace elements in quartz crystal during chlorine roasting.

Effect of fermented polypeptide of Sacha Inchi(Plukenetia volubilis L.)on the structure of liquid crystal emulsion

In order to study the action mechanism of Sacha Inchi polypeptide in liquid crystal emulsion,oil-in-water liquid crystal emulsions with Sacha Inchi fermented polypeptide as the active component were prepared.The microstructures,particle sizes,stabilities,thermodynamic properties,and rheological properties of liquid crystal emulsions with different concentrations of the fermentation products were observed by Polarizing microscope,Particle size meter,Thermogravimetric differential thermal synchronous measurement system,and Rheometer,respectively.The results showed that the average particle size of fermented peptide liquid crystal emulsion was(25.7±2.8)μm,and the liquid crystal structure was complete and stable.The content of bound water and liquid crystal in the emulsion with 1%Sacha Inchi polypeptide were higher than those in the blank emulsion and the emulsions with 3%and 5%Sacha Inchi polypeptide.Rheological results indicated that the viscosity of liquid crystal emulsion with the change curve of shear rate registered the shear thinning phenomenon,which belongs to non-Newtonian fluid.The hysteresis area,energy storage modulus,and loss modulus of the 1%additive amount of liquid crystal emulsion were larger than those of the blank emulsion and the emulsions with 3%and 5%Sacha Inchi polypeptide,indicating greater thixotropy and stronger shear resistance.The hydrophilic amino acid residues of the peptide in the 1%additive amount of the emulsion were combined with the water phase,while the hydrophobic amino acid residues of the peptide entered the oil phase,which formed a viscoelastic film at the oil-water interface,so that the liquid crystal emulsion had a more stable gel network structure.

Effect of Fe_(2)O_(3)on the Structure,Physical Properties and Crystallization of CaO-Al_(2)O_(3)-SiO_(2)Glass

The calcium aluminosilicate-based glasses(CaO-Al_(2)O_(3)-SiO_(2),CAS)with different Fe_(2)O_(3)content(0.10wt%,0.50wt%,0.90wt%,and 1.30wt%)were prepared by traditional melt-quenching method.The glass network structure,thermal and mechanical properties,and crystallization behavior changes were investigated by nuclear magnetic resonance spectrometer,Fourier-transform infrared spectro-photometer,X-ray diffractometer,differential scanning calorimetry and field emission scanning electron microscope measurements.The change of Q^(n)in glass structures reveals the glass network connectivity decreases due to the increasing content of Fe_(2)O_(3)addition,resulting in the increasing of non-bridging number in glass structure.The glass densities slightly rise from 2.644 to 2.681 g/cm^(3),while Vickers’s hardness increases at first,from 6.469 to 6.901 GPa,then slightly drops to 6.745 GPa,with Fe_(2)O_(3)content increase.There is almost no thermal expansion coefficient change from different Fe_(2)O_(3)content.The glass transmittance in visible range gradually decreases with higher Fe_(2)O_(3)content,resulting from the strong absorption of Fe^(2+)and Fe^(3+)ions.The calculated activation energy from thermal analysis results first decreases from 282.70 to 231.18 kJ/mol,and then increases to 244.02 kJ/mol,with the Fe_(2)O_(3)content increasing from 0.10wt%to 1.30wt%.Meanwhile,the maximum Avrami constant of 2.33 means the CAS glasses exhibit two-dimensional crystallization.All of the CAS glass-ceramics samples contain main crystal phase of anorthite,the microstructure appears lamellar and columnar crystals.

Synthesis,crystal structure,and DNA‑binding of binuclear lanthanide complexes based on a multidentate Schiff base ligand

Two new dinuclear lanthanidecomplexes,namely[Ln_(2)(dbm)_(2)(HL)_(2)(CH_(3)OH)_(2)]·4CH_(3)OH[Ln=Tb(1)and Dy(2),Hdbm=dibenzoylmethane]have been synthesized using prepared multidentate Schiff base ligand H_(3)L(hydroxy‑acetic acid(4‑diethylamino‑2‑hydroxy‑benzylidene)‑hydrazide)with good biological activity.Structure characterizations show that the complex comprises two Ln3+ions,two dbm-ions,two HL^(2-)ligands,two CH_(3)OH molecules,and four free methanol molecules.Each Ln^(3+)ion is eight‑coordinated.The two central Lnions are bridged by twoμ_(2)‑O atoms leading to a parallelogram[Ln2O2]core.The interaction between the compounds(H_(3)L,1,and 2)and the calf thymus DNA(CT‑DNA)has been further confirmed by UV‑Vis spectrometry,fluorescence titration,and cyclic voltammetry.The results showed that both 1 and 2 could undergo insertion with CT‑DNA.CCDC:2343005,1;2343006,2.

Cryo-EM combined with image deconvolution to determine ZIF-8 crystal structure

Metal–organic frameworks(MOFs) are crystalline porous materials with tunable properties, exhibiting great potential in gas adsorption, separation and catalysis.[1,2]It is challenging to visualize MOFs with transmission electron microscopy(TEM) due to their inherent instability under electron beam irradiation. Here, we employ cryo-electron microscopy(cryoEM) to capture images of MOF ZIF-8, revealing inverted-space structural information at a resolution of up to about 1.7A and enhancing its critical electron dose to around 20 e^(-)/A^(2). In addition, it is confirmed by electron-beam irradiation experiments that the high voltage could effectively mitigate the radiolysis, and the structure of ZIF-8 is more stable along the [100] direction under electron beam irradiation. Meanwhile, since the high-resolution electron microscope images are modulated by contrast transfer function(CTF) and it is difficult to determine the positions corresponding to the atomic columns directly from the images. We employ image deconvolution to eliminate the impact of CTF and obtain the structural images of ZIF-8. As a result, the heavy atom Zn and the organic imidazole ring within the organic framework can be distinguished from structural images.

Synthesis,crystal structures,and antibacterial activities of two zinc(Ⅱ) complexes bearing 5⁃phenyl⁃1H⁃pyrazole group

A novel compound(H_(2)L)SCN(5⁃methyl⁃3⁃phenyl⁃2H⁃pyrazol⁃1⁃ium thiocyanate)has been obtained by the reaction of thiosemicarbazide with benzoylacetone in ethanol.Two zinccomplexes[Zn(HL)_(2)(NCS)(CH_(3)COO)](1)and[Zn_(2)(L)_(2)(HL)_(2)(NCS)_(2)]_(2)·2CH_(3)OH(2)have been synthesized by the coordination reactions of Zn(OAc)_(2)·2H_(2)O or ZnCl_(2)with(H_(2)L)SCN under reflux conditions.Elemental analyses and single⁃crystal X⁃ray diffraction have con⁃firmed the structures of the synthesized compounds.The(H_(2)L)SCN ligand and complex 1 pertain to the triclinic sys⁃tem with space group P1,while complex 2 belongs to the monoclinic system with space group P2_(1)/n.Additionally,the antibacterial activities of the compounds were evaluated in vitro using the agar diffusion method against the bac⁃terial strains(Candida albicans,Staphylococcus aureus,and Escherichia coli).The results showed that the ligand exhibited relatively good antibacterial activities against the bacteria,and the complexes possessed stronger antibac⁃terial activities against the same bacteria than the free ligand.CCDC:2190252,(H2L)SCN;2190253,1;2190256,2.

Advances in Liquid Crystal Epoxy:Molecular Structures,Thermal Conductivity,and Promising Applications in Thermal Management

Traditional heat conductive epoxy composites often fall short in meeting the escalating heat dissipation demands of large-power,high-frequency,and highvoltage insulating packaging applications,due to the challenge of achieving high thermal conductivity(k),desirable dielectric performance,and robust thermomechanical properties simultaneously.Liquid crystal epoxy(LCE)emerges as a unique epoxy,exhibiting inherently high k achieved through the self-assembly of mesogenic units into ordered structures.This characteristic enables liquid crystal epoxy to retain all the beneficial physical properties of pristine epoxy,while demonstrating a prominently enhanced k.As such,liquid crystal epoxy materials represent a promising solution for thermal management,with potential to tackle the critical issues and technical bottlenecks impeding the increasing miniaturization of microelectronic devices and electrical equipment.This article provides a comprehensive review on recent advances in liquid crystal epoxy,emphasizing the correlation between liquid crystal epoxy’s microscopic arrangement,organized mesoscopic domain,k,and relevant physical properties.The impacts of LC units and curing agents on the development of ordered structure are discussed,alongside the consequent effects on the k,dielectric,thermal,and other properties.External processing factors such as temperature and pressure and their influence on the formation and organization of structured domains are also evaluated.Finally,potential applications that could benefit from the emergence of liquid crystal epoxy are reviewed.

Syntheses,crystal structures,and quantum chemistry calculation of two Ni(Ⅱ)coordination polymers

Two new coordination polymers,[Ni(Hpdc)(bib)(H_(2)O)]_(n)(1)and{[Ni(bib)_(3)](ClO_(4))_(2)}_(n)(2),were prepared by mixing Ni^(2+),3,5⁃pyrazoledicarboxylic acid(H3pdc)/p⁃nitrobenzoic acid and 1,4⁃bis(imidazol⁃1⁃ylmethyl)butane(bib)by a hydrothermal method,respectively.X⁃ray crystallography reveals a 2D network constructed by six⁃coordinated Ni(Ⅱ)centers,bib,and Hpdc2-ligands in complex 1,while a 2D network is built by Ni(Ⅱ)and bib ligands in 2.Furthermore,the quantum⁃chemical calculations have been performed on‘molecular fragments’extracted from the crystal structure of 1 using the PBE0/LANL2DZ method in Gaussian 16 and the VASP program.CCDC:2343794,1;2343798,2.

Influence rules of early transition elements on rapid solidified structure and nanocrystallization behaviors of Fe-Si-B-Cu soft magnetic alloys with high Cu content

Unique rapid solidified structure and nanocrystallization mechanism enable the Fe-based nanocrystalline alloys with high Cu content excellent soft magnetic properties and good manufacturability,and also results in unusual phenomena in terms of alloying effects.In the present work,we systematically studied the influence rules of early transition elements on the rapid solidified structure and nanocrystallization behaviors of Fe-Si-B-Cu soft magnetic alloys with high Cu content and explored the related mechanisms.In terms of rapid solidified structure,the additions of early transition elements always inhibit the for-mation of pre-existingα-Fe crystals even eliminate them,and the additions that could produce larger atomic mismatch parameter(δ)and negative mixing enthalpy(△H_(mix))show stronger effects.In terms of nanocrystallization behaviors,the increases inδand negative△H_(mix) weaken the competitive growth between the pre-existing nanocrystals during annealing and then coarsen the nanostructure of the an-nealed alloys and deteriorate their magnetic softness,while the excessive increases inδand negativeHmix could significantly suppress the growth ofα-Fe crystals by diffusion inhibition during annealing and thus remarkable refine the nanostructure of the annealed alloys and improve their magnetic softness.

Two novel Cu(Ⅰ)complexes based on diimide and bisphosphine ligands:synthesis,crystal structure and spectroscopic properties

Two Cu(Ⅰ)complexes[Cu(Bphen)(dppBz)]ClO_(4)·2CH_(3)OH(1)and[Cu_(2)(Bphen)_(2)(dpppda)]BF_(4)(2){Bphen=4,7-diphenyl-1,10-phenanthroline,dppBz=1,2-Bis(diphenylphosphino)benzene,dpppda=N1,N1,N4,N4-tetrakis[(diphenylphosphino)methyl]-1,4-benzenediamin}were synthesized using a one-pot method.X-ray crystallography was used to elucidate their crystal structures and photophysical properties.A series of characterization tests including elemental analysis,NMR,FT-IR,UV-Vis absorption spectroscopy,fluorescence spectroscopy,thermal gravimetric analysis and terahertz time-domain spectroscopy(THz-TDS)were used to further investigate their properties.The results show that complex 1 structure is mononuclear containing two solvent molecules per unit cell,while complex 2 structure is binuclear containing two metal centers per unit cell.According to photophysical properties and density functional theory(DFT)calculations,their luminescence properties can be attributed to metal-to-ligand charge transfer(MLCT).Both complexes have a unique stability,which is confirmed by thermal gravimetric analysis.

Synthesis,crystal structure and photo-physical properties of tris(4-methyl-2,5-diphenylpyridine)iridium for OLED

Organic light-emitting diodes(OLEDs)have important applications in the field of next-generation displays and lighting,and phosphorescent iridium complexes are an important class of electroluminescent phosphorescent materials.In this paper,Ir(bmppy)_(3),tris(4-methyl-2,5-diphenylpyridine)iridium,was synthesized and elvaluted for photo-physical characteristics.Single crystals suitale for X-ray diffraction(XRD)were grown from a mixture solvent of dichloromethane and absolute ethanol.The composition and structur of Ir(bmppy)_(3)were determined by element analysis,NMR spectra and XRD.The complex crystallizes in the monoclinic symmetry with the space group P21/c with a slightly distorted octahedral configuration.As measured by UV-Visible and photoluminescence spectra,Ir(bmppy)_(3) displays a maximum emission at at 527 nm at ambient temperature,a typical green-emitting profile.The complex has potential for application in the OLED industry.

The Crystal Structure Study of CaSrFe0.75Co0.75Mn0.5O6−δ by Neutron Diffraction

The crystal structure of CaSrFe0.75Co0.75Mn0.5O6−δ is investigated through neutron diffraction techniques in this study. The material is synthesized using a solid-state synthesis method at a temperature of 1200˚C. Neutron diffraction data is subjected to Rietveld refinement, and a comparative analysis with X-ray diffraction (XRD) data is performed to unravel the structural details of the material. The findings reveal that the synthesized material exhibits a cubic crystal structure with a Pm-3m phase. The neutron diffraction results offer valuable insights into the arrangement of atoms within the lattice, contributing to a comprehensive understanding of the material’s structural properties. This research enhances our knowledge of CaSrFe0.75Co0.75Mn0.5O6−δ, with potential implications for its applications in various technological and scientific domains.

Analyses of Reaction Mechanisms among Different Sulfonation Reagents and m-Diphenylamine and Crystal Structures of the Formed Compounds

In the traditional process, m-phenylenediamine reacts with fuming sulfuric acid at high temperature to get intermediates, and then after dehydration occurs intramolecular rearrangement to get 2,4-diaminobenzenesulfonic acid. Traditional methods need to consume a lot of fuming sulfuric acid or concentrated sulfuric acid, resulting in high industrial large-scale production cost, more waste, and posing a serious environmental pollution risk. In this thesis, three different sulfonation reagents were used for the sulfonation reaction of m-phenylenediamine, and the reaction mechanisms and crystal structures of the three pathways were investigated. The three routes are: 1) one-step synthesis of monosulfonated compound 1 from raw material and sulfur trioxide (SO3);2) rapid reaction of raw material and chlorosulfonic acid to synthesize bisulfonated compound 2;3) direct eutectic crystallization of raw material and ordinary sulfuric acid to obtain compound 3. The crystal structure of the compounds synthesized by three paths was analyzed by X-ray single crystal diffraction, and compound 1 was characterized by NMR, Fourier infrared spectra, UV-visible spectrum and Mass spectrometry. The one-step synthesis of SO3 as a sulfonation reagent has the advantages of mild reaction conditions, simple operation and low cost.

Crystallization microstructure of Mg_(65)Cu_(25)Y_(10) bulk amorphous alloy

Mg65Cu25Y10 bulk amorphous alloy specimens prepared by conventional copper mould method were heated at 200 °C for different time and the phase contents as well as microstructure were studied.The XRD results show that the crystallization of Mg65Cu25Y10 bulk amorphous alloy specimen becomes complete as the treating time increases and Mg2Cu,Mg24Y5 and HCP-Mg crystalline phases are found.Snowflake-like morphology is found in different specimens through SEM observation.The EDS patterns show that the composition of the snowflake-like structure is close to that of the as-cast alloy.Laminated structures are observed from the TEM images of the snowflake-like structure.From the electron diffraction patterns,it is seen that the snowflake-like structure is the combination of Mg24Y5 and amorphous matrix.The FCC-Mg phase in the matrix transforms into HCP-Mg during the heat-treating process.

Synthesis and Crystal Structure of t he Complex of Antimony Trichloride and Dioxane

New solid complex of the antimony trichloride and dioxane was obtained th rough a reaction of the dioxane and the absolute methanol solution of the antimony trichloride.The formula of the complex is[SbCl_(3)·{(CH_(2))_(4)O_(2)}_(1.5)].The crystal structure of the comple x belongs to cubic system,space group I-43d,a=17.1417(5)?,Z=16.The trivalent antimony ion not only bonds directly to three chlorine anions,but also is co ordinated by three oxygen atoms of th e dioxane molecules.Two oxygen atoms in a dioxane molecule wi ll coordinate to different antimony ions,respectively.

Crystal Structure and Photocatalytic Characteristics of Nanoscate Sb-doped TiO_2 Thin Films

Nanoscale Sb doped titanium dioxide thin films photocatalyst （Ti1-xSbO2） were obtained from dip-coating sol-gel method. The influence of dopant Sb density on the crystal structure and the phase transformation of the thin tilms were characterized by X-ray diffraction （XRD） and Raman spectra. The results of XRD showed that as prepared lilms were not only in anatase state but also in brookite. The crystalline size was estimated to be around 13.3-20 nm. Raman spectra indicated there coexisted other phases and a transformation from brookite to anatase in the samples doped with 0.2% Sb. After doping a proper amount of Sb, the cryst,allization rate and the content of the anatase Ti1-x, SbO2 in the thin films was clearly enhanced because Sb replaced part. of the Ti of TiO2 in the thin films. The anode current density （photocurrent density） and the first order reaction speed constant （k） of t.hin films doped with 0.2% Sb reached 42.49 μA/cm^2 and 0.171 h/cm^2 under 254 nm UV illumination, respectively, which is about 11 times and 2 times that of the non doped TiO2 anode prepared by the same method respectively.

Synthesis, crystal structure and magnetic properties of novel copper compound Cu(phen)(m-CBA)_2

A novel compound Cu（phen）（m-CBA）2 was synthesized with m-chlorobenzoic acid（m-CBA）, 1,10-phenanthroline（phen） and Cu（OAc）2·H2O. It was characterized by IR, UV, elemental analyses and X-ray crystallography. It crystallizes in the monoclinic crystal system with C2/c space group, a=2.9699（4） nm, b=1.15452（2） nm, c=1.5335（2） nm, β=111.118（2）°, V=4.905 1（1） nm3, Z=8, F（000）=2 328, R1=0.072 8, wR2=0.223 4 [I2σ（I）]. Structure analysis shows that the copper center coordinates with two nitrogen atoms from one 1,10-phenanthroline molecule, two oxygen atoms from two m-chlorobenzoic acid molecules, giving a distorted squared planar coordination geometry. This novel compound shows paramagnetic interactions between copper centers.

Crystal structure and fluorescence property of antofloxacin

Antofloxacin free base is prepared from antofloxacin hydrochloride by removing hydrogen chloride. Its crystal is obtained by slow evaporation of an acetonitrile-methanol mixed solution. Single-crystal X-ray diffraction reveals that the crystallography belongs to a triclinic PI space group with cell parameters： a = 0. 663 07（13） nm, b = 0. 898 39（18） nm, c = 1. 569 0（3） nm, α = 75.12（3）°,β = 87.92（3）°, γ = 77.57 （3）°. Antofloxacin shows no fluorescence in solution, but the crystalline state emits strong green light at 510 nm under the excitation of 360 nm, indicating a fluorescence enhancement induced by aggregation. It demonstrates that intermolecular packing and interaction in the crystal lead to the improved fluorescence quantum yield. These results provide important intbrmation for the further exploration of the structure-activity relationship of antofloxacin and the development of new drugs.

Synthesis and Crystal Structure of a Two-dimensional Coordination Polymer Constructed by Thiophene-2,5-dicarboxylic Acid and 1,4-Bis(imidazol-1-yl)-butane

A metal-organic coordination polymer [Cd（tdc）（bimb）（μ2-H2O）]n （H2tdc = thiophe-ne-2,5-dicarboxylic acid, bimb = 1,4-bis（imidazol-l-yl）-butane） 1 has been hydrothermally synthe- sized and characterized by elemental analysis, IR, TG, luminescence spectrum and single-crystal X-ray diffraction. Colorless crystals crystallize in the triclinic system, space group P^-1 with a = 5.8945（3）, b = 10.3129（5）, c = 11.2226（5） A, a = 95.1430（10）,β = 97.9020（10）, γ = 90.5910（10）°, V = 672.84（6） A^3, C11H11CdN2O5S, Mr= 395.68, De = 1.953 g/cm^3, μ（MoKa） = 1.797 mm^-1, F（000） = 390, Z = 2, the final R = 0.0209 and wR = 0.0508 for 2514 observed reflections （I 〉 2σ（I））. The structure of 1 exhibits a two-dimensional layer-like structure.