Upper-rim-modified thioether thiacalix[4]arene used for liquid-liquid extraction of Au(Ⅲ)and Pd(Ⅱ)in hydrochloric acid medium

Gold(Au)and palladium(Pd)play an increasing role in the production and human life;Therefore,it is of great significance to study their recovery.A 5,11,17,23-tetra-ethylthio-25,26,27,28-tetra-hydroxyl thiacalix[4]arene(TCAET)was synthesized specifically for the capture of Au(Ⅲ)and Pd(Ⅱ)from HCl medium by liquid-liquid extraction.In a 0.1 mol·L^(-1)HCl medium,the transfer of Au(Ⅲ)and Pd(Ⅱ)from the aqueous phase to the organic phase was highly efficient,with a transfer ratio of 100%for Au(Ⅲ)and 98%for Pd(Ⅱ).Furthermore,the extraction equilibrium time for Au(Ⅲ)was just 5 min.Job's method data demonstrated that TCAET formed complexes with Au(Ⅲ)and Pd(Ⅱ)in a ratio of 2:3 and 1:1,respectively,during the extraction process.TCAET showed high selectivity toward Pd(Ⅱ)and Au(Ⅲ)over other competing metal ions.Moreover,both Au(Ⅲ)and Pd(Ⅱ)could be successfully stripped from the loaded organic phases with a 1.0 mol·L^(-1)thiourea in 0.5 mol·L^(-1)HCl and 0.5 mol·L^(-1)thiourea in 0.5 mol·L^(-1)HCl,respectively.Results obtained from five consecutive extraction-stripping cycles showed good reusability of TCAET toward Au(Ⅲ)and Pd(Ⅱ)recovery.The conclusion can provide a certain reference for thiacalixarene in the recovery of precious metal species.

The extraction of aromatics using N-methylpyrrolidone: Liquid-liquidequilibrium determination and mechanism exploration

LLE data of cyclooctane/3-methylpentane + benzene/toluene + N-methylpyrrolidone (NMP) at 298.15 Kand 313.15 K under a pressure of 101.3 kPa were measured in this work. The Othmer-Tobias and Handequations were adopted to validate the reliability of LLE data, where the correlation coefficients (R2) wereclose to unity, indicating the high reliability of the experimental data. The experimental data were analyzed using the distribution coefficient (D) and separation factor (S), and the effect of NMP extracting benzene and toluene from aromatics was explored. Meanwhile, the reason for the different extractionefficiencies of benzene and toluene using NMP was analyzed by quantum chemical calculations. TheNRTL and UNIQUAC thermodynamic models were used to correlate the liquid–liquid equilibrium data,and the relevant binary interaction parameters were obtained. The calculated root mean square deviation(RMSD) were all less than 0.0063, indicating that the obtained binary interaction parameters can be usedto simulate and calculate the extraction of aromatics using NMP.

Simulation of Solvent Extraction for Naphthenic Lubricating Base Oils

Solvent extraction is the process of separating aromatics from vacuum distillates for the production oflubricating base oils. In this study, the authors use dimethyl sulfoxide (DMSO) instead of furfural as solvent, in light of itshigher selectivity, to obtain extracts with a high aromatic content for naphthenic lubricating base oils. We systematicallyinvestigated effects of the solvent-to-oil (S/O) ratio and extraction temperature on the yield of the extract, efficiency ofaromatic removal, and composition of the extracts and raffinates. The results showed that the aromatic content of extractsfor naphthenic oils could reach a high value of about 80%. The solvent maintained a high selectivity for aromatics fornaphthenic oils even under a high S/O ratio and a high extraction temperature. Moreover, the efficiency of aromatic removalfor naphthenic lubricating base oils could be enhanced by increasing either the S/O ratio or the extraction temperature,although these measures had limited effects in practice. Following this, we used the non-random two-liquid (NRTL) modelbased on the pseudo-component approach to simulate the liquid-liquid equilibrium of the system of DMSO + naphtheniclubricating base oils, and determined the parameters of binary interaction through regression based on the data on phaseequilibrium. The modeling results showed that the predicted yield, content of the solvent, and composition of the raffinatesand extracts were in good agreement with those obtained in the experiments. This validates the reliability of the model usedto represent the DMSO + naphthenic lubricating base oil system. Both the experimental data and the method of simulationreported here can help optimize the extraction of naphthenic lubricating base oils, and provide a better understanding of thecorresponding process.

Colorimetric determination of nanomolar concentrations of silicate in natural waters after liquid-liquid extraction using methyl isobutyl ketone

A sensitive solvent extraction method for the determination of nonamolar concentrations of silicate in natural waters is developed. According to the traditional aqueous silicate method, silicomolybdenum blue formed by the reaction between silicate and ammoni- um molydate and reduced by metol-sulfite reagent is extracted by methyl isobutyl ketone. The absorbance can be enhanced substantially up to 10-folds. The detection limit of silicate is 8 nmol/dm^3 , which is one tenth smaller than the traditional method, with the precision of 4.0% at a silicate level of 50 nmol/dm^3 and 3.2% at a silicate level of 6 μmol/dm^3. Comparing the calibration curves in the distilled water and seawater, it can be seen that the salt effect also exists in the extraction method. However, the salt effect is a linear function of the salinity and can be corrected by simple calibration. The proposed method is successfully applied to the determination of silicate in natural waters. Natural concentrations of arsenate, arsenite and phosphate cause negligible interference.

Mass transfer coefficient in the eductor liquid-liquid extraction column

In this research gasoil desalting was investigated from mass transfer point of view in an eductor liquid–liquid extraction column(eductor-LLE device).Mass transfer characteristics of the eductor-LLE device were evaluated and an empirical correlation was obtained by dimensional analysis of the dispersed phase Sherwood number.The Results showed that the overall mass transfer coefficient of the dispersed phase and extraction efficiency have been increased by increasing Sauter mean diameter(SMD)and decreasing the nozzle diameter from 2 to 1 mm,respectively.The effects of Reynolds number(R_(e)),projection ratio(ratio of the distance between venturi throat and nozzle tip to venturi throat diameter,Rpr),venturi throat area to nozzle area ratio(R_(th-n))and two phases flow rates ratio(R_(Q))on the mass transfer coefficient(K)were determined.According to the results,K increase with increasing Re and RQ and also with decreasing Rpr and R_(th-n).Semi-empirical models of drop formation,rising and coalescence were compared with our proposed empirical model.It was revealed that the present model provided a relatively good fitting for the mass transfer model of drop coalescence.Moreover,experimental data were in better agreement with calculated data with AARE value of 0.085.

Comparison of liquid-liquid extraction-thin layer chromatography with solid-phase extraction-high-performance thin layer chromatography in detection of urinary morphine

Liquid-liquid extraction-thin layer chromatography （LLE-TLC） has been a common and routine combined method for detection of drugs in biological materials. Solid-phase extraction （SPE） is gradually replacing the tra- ditional LLE method. High performance thin layer chromatography （HPTLC） has several advantages over TLC. The present work studied the higher efficiency of a new SPE-HPTLC method over that of a routine LLE-TLC method, in extraction and detection of urinary morphine. Fifty-eight urine samples, primarily identified as mor- phine-positive samples by a strip test, ＇were re-screened by LLE-TLC and SPE-HPTLC. The results of LLE-TLC and SPE-HPTLC were then compared with each other. The results showed that the SPE-HPTLC detected 74% of total samples as morphine-positive samples whereas the LLE-TLC detected 48% of the same samples. We further discussed the effect of codeine abuse on TLC analysis of urinary morphine. Regarding the importance of morphine detection in urine, the present combined SPE-HPTLC method is suggested as a replacement method for detection of urinary morphine by many reference laboratories.

Salting-Out Assisted Liquid-Liquid Extraction Combined with HPLC for Quantitative Extraction of Trace Multiclass Pesticide Residues from Environmental Waters

In this study, salting-out assisted liquid-liquid extraction combined with high performance liquid chromatography diode array detector (SALLE-HPLC-DAD) method was developed and validated for simultaneous analysis of carbaryl, atrazine, propazine, chlorothalonil, dimethametryn and terbutryn in environmental water samples. Parameters affecting the extraction efficiency such as type and volume of extraction solvent, sample volume, salt type and amount, centrifugation speed and time, and sample pH were optimized. Under the optimum extraction conditions the method was linear over the range of 10 - 100 μg/L (carbaryl), 8 - 100 μg/L (atarzine), 7 - 100 μg/L (propazine) and 9 - 100 μg/L (chlorothalonil, terbutryn and dimethametryn) with correlation coefficients (R2) between 0.99 and 0.999. Limits of detection and quantification ranged from 2.0 to 2.8 μg/L and 6.7 to 9.5 μg/L, respectively. The extraction recoveries obtained for ground, lake and river waters were in a range of 75.5% to 106.6%, with the intra-day and inter-day relative standard deviation lower than 3.4% for all the target analytes. All of the target analytes were not detected in these samples. Therefore, the proposed SALLE-HPLC-DAD method is simple, rapid, cheap and environmentally friendly for the determination of the aforementioned herbicides, insecticide and fungicide residues in environmental water samples.

Determination of 16 Species of OCPs in Water by Liquid-liquid Extraction-GC

[Objective] The research aimed to study the determination of 16 kinds of OCPs in water by liquid-liquid extraction -GC. [Method] The new method for determining 16 kinds of OCPs in water by liquid-liquid extraction -GC was established, and the influencing factors such as nitrogen pressure and water bath temperature were discussed. [ Result] Detection limit of the method was from 3.2 to 14.1 ng/L, the relative standard deviation was between 4.0% and 9.6%, and the average recovery ranged from 80.8% to 106.0%. By optimizing nitrogen pressure and water bath temperature in the sample pretreatment process, when nitrogen pressure was ＋0.087 kPa, and water bath temperature was ±36 ℃, recovery effect of this method was better. [ Conclusion] The determination method had accurate qualitative and quantitative results, and met detection requirement of 16 kinds of OCPs in water.

Liquid-liquid extraction pretreatment samples method used for pharmacokinetic study of rhubarb in rats after oral administrated

Objective:Pretreatment of biological samples is the most critical step in pharmacokinetic studies,especially pre-treatment of plasma samples.The pretreatment of biological samples in pharmacokinetic study of Traditional Chinese Medicines (TCM) is difficult due to the complexity of the ingredients.An organic solvent system ethyl acetate:acetone (10:1) solution used for liquid-liquid extraction has been developed in this study and compared with the commonly used protein precipitation method.Methods:Rats,Beagle dogs and humans plasma samples were adopted in this study in order to demonstrate the universality of the pretreatment method.Feasibility of this pretreatment method was also verified through its application to the pharmacokinetics of rhubarb in rats.Results:According to the results of extraction recovery matrix effect,it was indicated that the liquid-liquid extraction methods with new organic solvent might be suitable for variety of structures of compounds and various types of plasma samples.The pharmacokinetic study result showed that the developed pretreatment method could successfully be used for simultaneous determination of three active compounds modin,emodin-8-O-β-D-glucopyranoside (EDG) and rhein in rat plasma with high sensitivity,accuracy,and recovery by liquid chromatography tandem mass spectrometry (LC-MS/MS).Conclusion:The pretreatment method of liquid-liquid extraction methods with new organic solvent could be successfully applied for multi-component pharmacokinetics of TCM.

Sinomenine Purification by Continuous Liquid-Liquid Extraction Process with Centrifugal Extractors

Continuous manufacturing is considered as one of the future trends of pharmaceutical engineering. In this work, continuous liquid-liquid extraction for sinomenine purification was realized with the usage of centrifugal extractors. Chloroform was used as the extractant because of the high distribution coefficient (>100). Higher extraction ratio can be obtained when using the centrifugal extractor of Model CWL50-N. The extraction ratio of the second-stage extraction was higher than that of the first-stage extraction. The extraction ratio of the second-stage countercurrent extraction was higher than that of second-stage cross-flow extraction. When chloroform phase was recycled for liquid-liquid extraction, the extraction ratio was also higher than 95%. This work can also be an example of continuous liquid-liquid extraction for the separation of other Chinese medicine components.

Homogeneous Liquid-Liquid Extraction (HoLLE) of Palladium in Real Plating Wastewater for Recovery

On the basis of homogeneous liquid-liquid extraction (HoLLE) with Zonyl FSA to plating water containing 1 mg palladium, 96.6% of the palladium was extracted into the sedimented liquid phase. After phase separation, the volume ratio (Va/Vs) of the aqueous phase (Va) and the sedimented liquid phase (Vs) was 556 (50 mL → 0.09 mL). The assessment of the potential implementation of this procedure to wastewater treatment showed that HoLLE was satisfactorily achieved when the volume was scaled up to 1000 mL. Moreover, HoLLE was conducted to real palladium plating wastewater generated in the plating industry. 94.5% of the palladium was extracted into the sedimented liquid phase. After phase separation, the volume ratio (Va/Vs) of the aqueous phase (Va) and the sedimented liquid phase (Vs) was 500 (50 mL → 0.1 mL). In addition, HoLLE could separate palladium from coexisting metals in real plating wastewater. This knowledge is expected to lead to the development of new separation and concentration technologies of rare metals from real plating wastewater.

Efficient desulfurization of gasoline fuel using ionic liquid extraction as a complementary process to adsorptive desulfurization

The extractive desulfurization of a model gaso- line containing several alkyl thiols and aromatic thiophenic compounds was investigated using two imidazolium-based ionic liquids （ILs）, 1-butyl-3-methylimidazolium tetrachloroaluminate, and 1-octyl-3-methylimidazolium te- trafluoroborate, as extractants. A fractional factorial design of experiments was employed to evaluate the effects and possible interactions of several process variables. Analysis of variance tests indicated that the number of extraction steps and the IL/gasoline volume ratio were of statistically highly significant, but none of the interactions were significant. The results showed that the desulfurization efficiency of the model gasoline by the ILs could reach 95.2 % under the optimal conditions. The optimized conditions were applied to study the extraction of thiophenic compounds in model gasoline and several real gasoline samples; the following order was observed in their separation： benzothio- phenc 〉 thiophcne 〉 3-methylthiophene 〉 2-methylthiophene, with 96.1% removal efficiency for benzothiophene. The IL extraction was successfully applied as a complementary process to the adsorptive desulfurization with acti- vated Raney nickel and acetonitrile solvent. The results indicated that the adsorptive process combined with IL extraction could provide high efficiency and selectivity, which can be regarded as a promising energy efficient desulfurization strategy for production of low-sulfur gasoline.

Separation of Red (Y_2O_3: Eu^(3+)), Blue (Sr,Ca,Ba)_(10)(PO_4)_6Cl_2: Eu^(2+) and Green (LaPO_4:Tb^(3+),Ce^(3+)) Rare Earth Phosphors by Liquid/Liquid Extraction

A novel process for separation of red （Y2O3： Eu^3＋）, blue （Sr, Ca, Ba）10（PO4）6Cl2： Eu^2＋ and green （LaPO4： Tb^3＋, Ce^3＋） fine tricolor phosphor powders was established. First, the green phosphor was extracted and separated from three phosphor mixtures in heptane/DMF（N, N-Dimethylformamide） system using stearylamine or laurylamine （DDA） as the cationic surfactant. Then, after being treated with 99.5% ethanol, the blue and red phosphors could be separated in Heptane/DMF system in presence of 1-octanesulfonic acid sodium salt as the anionic surfactant. Satisfactory separation results have been achieved through two steps extractions with their artificial mixtures. The grades and recovery of separated products reached respectively as follows： red product was 95.3% and 90.9%, blue product was 90.0% and 95.2%, and green product was 92.2% and 91.8%.

Highly Efficient Extraction of Cadmium(II) in Nitrate Medium by Quarternary Ammoniums

The solvent extraction of cadmium(II) from nitrate medium was studied. The using extractants were quaternary ammonium-based room temperature ionic liquid Aliquat 336 in either the chloride [(C8H17)3 CH3N+·Cl-], thiocyanate [(C8H17)3CH3N+·SCN-] and hydrogenophosphate forms, diluted in the kerosene. The effects of different parameters such as equilibration time, initial pH, O/A molar ratio (nextractant/nCd), initial extractant concentration and ionic strong on extraction of cadmium(II) were investigated. The extraction yields of cadmium(II) increase with increasing initial pH and initial extractant concentration. The stoichiometry of the extracted species was determined on the basis of slope analysis. The effect of various salts such as KSCN and NaNO3 in the feed solution within the concentrations of 10 to 100 mM on extraction of cadmium(II) was studied at optimal initial pH = 6.2. The relation between the percentages of the extracted species () and the extraction yields were investigated by a calculation program using CHEAQS V. L20.1. The results showed that the decrease of the extraction yield of Cd(II) was related with the decrease gradually of percentage of cadmium(II) free and the increase of percentage of and species with the addition of KSCN. More the hydrophobic character of the extractant is high, more the extraction is better. The metal ion was stripped out satisfactorily using nitric acid as stripping agent, in one step.

Cu(II) Extraction in Ionic Liquids and Chlorinated Solvents: Temperature Effect

Room temperature ionic liquids have been currently used in liquid/liquid extraction processes in order to substitute conventional organic solvents. In this paper, a series of chlorinated solvents and 1-alkyl-3-me- thylimidazolium-based ionic liquids were selected to study the extraction efficiency of a lipophilic polya- mine 1,1,7,7-tetraethyl-4-tetradecyldiethylenetriamine (TE14DT) towards the model ion Cu(II) in such dif-ferent media. The effect of temperature on the extraction efficiency was also investigated. The metal ion par-tition was found to be strongly dependent on both the nature of the solvent and on the working temperature. The viscosity of ionic liquids and the water content in ionic liquid were found to affect the extraction effi-ciency of TE14DT. The chemical nature of the cation of ionic liquids, and in particular the alkyl chain length on imidazolium ring, also seemed to be important in determining the efficiency of the extraction process. Finally, preliminary experiments on back-extraction of Cu(II) ions from ionic liquid also revealed interesting hints to the development of a continuous transport process.

Synthesis and Extraction Studies of Calix[4]-Crown-4 Oxime Derivatives

The article comprises synthesis of calyx[4]-oxa-crown, and calix[4]-thia-crown compounds containing nitrile groups (3a, 3b) and amino groups (4a, 4b) and their corresponding oxime derivatives (5a, 5b) and liquid-liquid extraction studies of these compounds. The oxime derivatives of compounds (5a, 5b) have been synthesized by reacting of di-n-butylamino derivatives of calix[4]-oxa-crown, and calix[4]-thia-crown compounds (4a, 4b) with amphi-chloroglyoxime in methanol-THF. Their cation and anion transfer studies were performed by using liquid-liquid extraction procedure. It has been concluded from the observations that the compound 3a shows a good extraction behavior toward Na+ ion in the presence of other metal cations. Whereas, its oxime derivatives transfers all of the metal cations used in the liquid-liquid extraction studies.

Nanoencapsulation of Antioxidant-Rich Fraction of Roasted <i>Moringa oleifera</i>L. Leaf Extract: Physico-Chemical Properties and <i>in Vitro</i>Release Mechanisms

Nanocapsules (NC) of antioxidant rich fraction of roasted Moringa leaves were prepared using emulsion coacervation technique with alginate (ALG) and/or chitosan (CTS) as biopolymers. NC were characterized based on particle size, polydispersity index (PDI), zeta potential, encapsulation efficiency (EE) and loading capacity (LC). Substituting CTS with ALG in NC caused a reduction in particle size and PDI, and enhanced EE. Mean particle size dropped from 1209 nm in 1:3 to 413 nm in 3:1 ALG/CTS-NC;PDI decreased from 0.9% to 0.2% and zeta potential from -5.4 to -28.1 mV. The highest EE (87.6%) and LC (13%) were obtained with ALG-CTS-NC (3:1). ALG-NC were spherical while both CTS and ALG-CTS-NC were ovoid. ALG and ALG-CTS-NC were oil/water emulsions while CTS-NC formed water/oil emulsions. 60% and 70% of bioactives in ALG-CTS-NC (3:1) were released in simulated gastric and intestinal fluids respectively after 400 min. Release of antioxidants from NC is concentration-dependent (First order model) and involves simultaneously diffusion (Higuchi model), swelling (korsmeyer-Peppas model) and erosion (Hixson-Crowell model) mechanisms.

Detection of geosmin and 2-methylisoborneol by liquid-liquid extraction-gas chromatograph mass spectrum (LLE-GCMS) and solid phase extraction-gas chromatograph mass spectrum (SPE-GCMS)

Two sample preparation methods were introduced and compared in this paper to establish a simple,quick and exact analysis of geosmin and 2-methylisoborneol.LC-18 column was employed in solid phase extraction(SPE),1.0 mL of hexane was adopted in liquid-liquid extraction(LLE),and the extracts were analyzed by gas chromatograph mass spectrum(GCMS)in selected ion mode.Mean recoveries of SPE were low for 2-methylisoborneol(2-MIB)and geosmin(GSM)with values below 50%.For LLE,the recoveries were satisfyingly above 50%for 2-MIB and 80%for GSM.Detection limits of the LLE method were as low as 1.0 ng/L for GSM and 5.0 ng/L for 2-MIB.A year-long investigation on odor chemicals of drinking water in Shanghai demonstrated that in the summer,there was a serious odor problem induced by a high concentration of 2-MIB.The highest concentration of 152.82 ng/L appeared in July in raw water,while GSM flocculation was minimal with concentrations below odor threshold.

Using cyclic liquid-liquid extraction method for isolation and identification of relative compounds during lignin biodegradation

By using the cyclic liquid-liquid extraction method the lignin biodegradated derivatives can be effectively extracted from the effluent liquors in ligninolytic enzymes treated kraft pulps. More than forty compounds were identified from the extractives by gas chromatography-mass spectrometry analysis. The result showed that lignin is treated with different ligninolytic enzymes, and the composition and content of the extractives differ obviously. These results suggest that the cyclic liquid-liquid extraction method can be used effectively as one new technique for the study of lignin biodegrada-tion mechanisms.

Optimization and Application of Liquid Chromatography Determination of Dispersive Liquid-liquid Microextraction Purified Astaxanthin in Shrimp Waste

A new molecularly imprinted solid-phase extraction（MISPE） monolithic cartridge was synthesized, and MISPE-DLLME（DLLME=dispersive liquid-liquid microextraction） was developed for purification of astaxanthin in shrimp waste. The eluent（methanol） from MISPE was used as the dispersive solvent in subsequent DLLME for further purifying and enriching the analyte prior to high-performance liquid chromatography（HPLC） analysis. The mobile phase was methanol-acetonitrile-water-dichloromethane（85：5：5：5, volume ratio）, flow rate was 0.7 mL/min and UV wavelength was 476 nm. Under optimal conditions, good linearity was obtained in a range of 0.2--200.0 lug/mL（r2=0.9998） with a limit of detection（LOD） of 0.08 Hg/mL, and the extraction recoveries at three spiked levels ranged from 88.3%--92.5% with a relative standard deviation（RSD） less than 4.3%. Moreover, the mean contents of astaxanthin in the three batches of shrimp waste were 95.9, 85.4 and 77.2 μg/g, respectively. This method combining the advantages of MISPE and DLLME results in high selectivity and low cost, which was applied to determining the astaxanthin level in shrimp waste samples.