Offshore carbon capture, utilization, and storage(OCCUS) is regarded as a crucial technology for mitigating greenhouse gas emissions.Quantitative monitoring maps of sealed carbon dioxide are necessary in a comprehensi...Offshore carbon capture, utilization, and storage(OCCUS) is regarded as a crucial technology for mitigating greenhouse gas emissions.Quantitative monitoring maps of sealed carbon dioxide are necessary in a comprehensive OCCUS project. A potential high-resolution method for the aforementioned purpose lies in the full-waveform inversion(FWI) of time-lapse seismic data. However, practical applications of FWI are severely restricted by the well-known cycle-skipping problem. A new time-lapse FWI method using cross-correlation-based dynamic time warping(CDTW) is proposed to detect changes in the subsurface property due to carbon dioxide(CO_(2)) injection and address the aforementioned issue. The proposed method, namely CDTW, which combines the advantages of cross-correlation and dynamic time warping, is employed in the automatic estimation of the discrepancy between the seismic signals simulated using the baseline/initial model and those acquired. The proposed FWI method can then back-project the estimated discrepancy to the subsurface space domain, thereby facilitating retrieval of the induced subsurface property change by taking the difference between the inverted baseline and monitor models. Numerical results on pairs of signals prove that CDTW can obtain reliable shifts under amplitude modulation and noise contamination conditions. The performance of CDTW substantially outperforms that of the conventional dynamic time warping method. The proposed time-lapse fullwaveform inversion(FWI) method is applied to the Frio-2 CO_(2) storage model. The baseline and monitor models are inverted from the corresponding time-lapse seismic data. The changes in velocity due to CO_(2) injection are reconstructed by the difference between the baseline and the monitor models.展开更多
In this paper, we deal with isommetric immersions of globally null warped product manifolds into Lorentzian manifolds with constant curvature c in codimension k≥3. Under the assumptions that the globally null warped ...In this paper, we deal with isommetric immersions of globally null warped product manifolds into Lorentzian manifolds with constant curvature c in codimension k≥3. Under the assumptions that the globally null warped product manifold has no points with the same constant sectional curvature c as the Lorentzian ambient, we show that such isometric immersion splits into warped product of isometric immersions.展开更多
Crealet is the world leader in sophisticated warp feeding technology and tailored solutions.Controlled warp tension stands also for controlled fabric quality.The Swiss firm presents its latest developments for technic...Crealet is the world leader in sophisticated warp feeding technology and tailored solutions.Controlled warp tension stands also for controlled fabric quality.The Swiss firm presents its latest developments for technical textile applications at Techtextil 2024 in Frankfurt,Germany.展开更多
Surface nanopatterning of semiconductor optoelectronic devices is a powerful way to improve their quality and performance.However,photoelectric devices’inherent stress sensitivity and inevitable warpage pose a huge c...Surface nanopatterning of semiconductor optoelectronic devices is a powerful way to improve their quality and performance.However,photoelectric devices’inherent stress sensitivity and inevitable warpage pose a huge challenge on fabricating nanostructures large-scale.Electric-driven flexible-roller nanoimprint lithography for nanopatterning the optoelectronic wafer is proposed in this study.The flexible nanoimprint template twining around a roller is continuously released and recovered,controlled by the roller’s simple motion.The electric field applied to the template and substrate provides the driving force.The contact line of the template and the substrate gradually moves with the roller to enable scanning and adapting to the entire warped substrate,under the electric field.In addition,the driving force generated from electric field is applied to the surface of substrate,so that the substrate is free from external pressure.Furthermore,liquid resist completely fills in microcavities on the template by powerful electric field force,to ensure the fidelity of the nanostructures.The proposed nanoimprint technology is validated on the prototype.Finally,nano-grating structures are fabricated on a gallium nitride light-emitting diode chip adopting the solution,achieving polarization of the light source.展开更多
The warping may become an important factor for the precise transverse vibrations of curved beams.Thus,the first aim of this study is to specify the structural design parameters where the influence of cross-sectional w...The warping may become an important factor for the precise transverse vibrations of curved beams.Thus,the first aim of this study is to specify the structural design parameters where the influence of cross-sectional warping becomes great and the first-order shear deformation theory lacks the precision necessary.The outof-plane vibrations of the first-order shear deformation theory are compared with the warping-included vibrations as the curvature and/or thickness increase for symmetric and asymmetric transversely-functionally graded(TFG)curved beams.The second aim is to determine the influence of design parameters on the vibrations.The circular/exact elliptical beams are formed via curved mixed finite elements(MFEs)based on the exact curvature and length.The stress-free conditions are satisfied on three-dimensional(3D)constitutive equations.The variation of functionally graded(FG)material constituents is considered based on the power-law dependence.The cross-sectional warping deformations are defined over a displacement-type FE formulation.The warping-included MFEs(W-MFEs)provide satisfactory 3D structural characteristics with smaller degrees of freedom(DOFs)compared with the brick FEs.The Newmark method is used for the forced vibrations.展开更多
In this paper, we delve into the intrinsic nature of mass and gravity, as per the amplitude modulation interpretation of the quantum theory. We explore the idea that the elementary constituent is an electromagnetic co...In this paper, we delve into the intrinsic nature of mass and gravity, as per the amplitude modulation interpretation of the quantum theory. We explore the idea that the elementary constituent is an electromagnetic configuration that interacts with the quantum field, leading to the emergence of inertia and gravity as a reaction to the exchange with the quantum field. While these two phenomena have a common origin, they are distinct. Our proposal suggests manipulating the connection between the quantum field and the particle using high-frequency electromagnetic fields, thereby making a warp drive possible.展开更多
Based on artificial intelligence technology,HawkVision intelligent image pattern/weft straightening machine of Changzhou Hongda Wisdom Technology Co.,Ltd.pioneered the internationally advanced"fullwidth scanning ...Based on artificial intelligence technology,HawkVision intelligent image pattern/weft straightening machine of Changzhou Hongda Wisdom Technology Co.,Ltd.pioneered the internationally advanced"fullwidth scanning warping and weft straightening technology",which completely solved the problems of textile pattern deformation,weft skew and weft bending that cannot be corrected and recognized by photoelectric weft straightening.展开更多
文摘Offshore carbon capture, utilization, and storage(OCCUS) is regarded as a crucial technology for mitigating greenhouse gas emissions.Quantitative monitoring maps of sealed carbon dioxide are necessary in a comprehensive OCCUS project. A potential high-resolution method for the aforementioned purpose lies in the full-waveform inversion(FWI) of time-lapse seismic data. However, practical applications of FWI are severely restricted by the well-known cycle-skipping problem. A new time-lapse FWI method using cross-correlation-based dynamic time warping(CDTW) is proposed to detect changes in the subsurface property due to carbon dioxide(CO_(2)) injection and address the aforementioned issue. The proposed method, namely CDTW, which combines the advantages of cross-correlation and dynamic time warping, is employed in the automatic estimation of the discrepancy between the seismic signals simulated using the baseline/initial model and those acquired. The proposed FWI method can then back-project the estimated discrepancy to the subsurface space domain, thereby facilitating retrieval of the induced subsurface property change by taking the difference between the inverted baseline and monitor models. Numerical results on pairs of signals prove that CDTW can obtain reliable shifts under amplitude modulation and noise contamination conditions. The performance of CDTW substantially outperforms that of the conventional dynamic time warping method. The proposed time-lapse fullwaveform inversion(FWI) method is applied to the Frio-2 CO_(2) storage model. The baseline and monitor models are inverted from the corresponding time-lapse seismic data. The changes in velocity due to CO_(2) injection are reconstructed by the difference between the baseline and the monitor models.
文摘In this paper, we deal with isommetric immersions of globally null warped product manifolds into Lorentzian manifolds with constant curvature c in codimension k≥3. Under the assumptions that the globally null warped product manifold has no points with the same constant sectional curvature c as the Lorentzian ambient, we show that such isometric immersion splits into warped product of isometric immersions.
文摘Crealet is the world leader in sophisticated warp feeding technology and tailored solutions.Controlled warp tension stands also for controlled fabric quality.The Swiss firm presents its latest developments for technical textile applications at Techtextil 2024 in Frankfurt,Germany.
基金financed by the National Natural Science Foundation of China(Nos.52025055 and 5227050783)。
文摘Surface nanopatterning of semiconductor optoelectronic devices is a powerful way to improve their quality and performance.However,photoelectric devices’inherent stress sensitivity and inevitable warpage pose a huge challenge on fabricating nanostructures large-scale.Electric-driven flexible-roller nanoimprint lithography for nanopatterning the optoelectronic wafer is proposed in this study.The flexible nanoimprint template twining around a roller is continuously released and recovered,controlled by the roller’s simple motion.The electric field applied to the template and substrate provides the driving force.The contact line of the template and the substrate gradually moves with the roller to enable scanning and adapting to the entire warped substrate,under the electric field.In addition,the driving force generated from electric field is applied to the surface of substrate,so that the substrate is free from external pressure.Furthermore,liquid resist completely fills in microcavities on the template by powerful electric field force,to ensure the fidelity of the nanostructures.The proposed nanoimprint technology is validated on the prototype.Finally,nano-grating structures are fabricated on a gallium nitride light-emitting diode chip adopting the solution,achieving polarization of the light source.
基金Project supported by the Scientific and Technological Research Council of Turkey(TUBITAK)via 2209-A Programme。
文摘The warping may become an important factor for the precise transverse vibrations of curved beams.Thus,the first aim of this study is to specify the structural design parameters where the influence of cross-sectional warping becomes great and the first-order shear deformation theory lacks the precision necessary.The outof-plane vibrations of the first-order shear deformation theory are compared with the warping-included vibrations as the curvature and/or thickness increase for symmetric and asymmetric transversely-functionally graded(TFG)curved beams.The second aim is to determine the influence of design parameters on the vibrations.The circular/exact elliptical beams are formed via curved mixed finite elements(MFEs)based on the exact curvature and length.The stress-free conditions are satisfied on three-dimensional(3D)constitutive equations.The variation of functionally graded(FG)material constituents is considered based on the power-law dependence.The cross-sectional warping deformations are defined over a displacement-type FE formulation.The warping-included MFEs(W-MFEs)provide satisfactory 3D structural characteristics with smaller degrees of freedom(DOFs)compared with the brick FEs.The Newmark method is used for the forced vibrations.
文摘In this paper, we delve into the intrinsic nature of mass and gravity, as per the amplitude modulation interpretation of the quantum theory. We explore the idea that the elementary constituent is an electromagnetic configuration that interacts with the quantum field, leading to the emergence of inertia and gravity as a reaction to the exchange with the quantum field. While these two phenomena have a common origin, they are distinct. Our proposal suggests manipulating the connection between the quantum field and the particle using high-frequency electromagnetic fields, thereby making a warp drive possible.
文摘Based on artificial intelligence technology,HawkVision intelligent image pattern/weft straightening machine of Changzhou Hongda Wisdom Technology Co.,Ltd.pioneered the internationally advanced"fullwidth scanning warping and weft straightening technology",which completely solved the problems of textile pattern deformation,weft skew and weft bending that cannot be corrected and recognized by photoelectric weft straightening.
