Numerical Study of a Three-Dimensional Laminar Flow in a Rectangular Channel with a 180-Degree Sharp Turn

This study presents a numerical analysis of three-dimensional steady laminar flow in a rectangular channel with a 180-degree sharp turn. The Navier-Stokes equations are solved by using finite difference method for Re = 900. Three-dimensional streamlines and limiting streamlines on wall surface are used to analyze the three-dimensional flow characteristics. Topological theory is applied to limiting streamlines on inner walls of the channel and two-dimensional streamlines at several cross sections. It is also shown that the flow impinges on the end wall of turn and the secondary flow is induced by the curvature in the sharp turn.

Analytic homotopy solution of generalized three-dimensional channel flow due to uniform stretching of the plate

In this communication a generalized three- dimensional steady flow of a viscous fluid between two infinite parallel plates is considered. The flow is generated due to uniform stretching of the lower plate in x- and y-directions. It is assumed that the upper plate is uniformly porous and is subjected to constant injection. The governing system is fully coupled and nonlinear in nature. A complete analytic solution which is uniformly valid for all values of the dimensionless parameters β Re and λ is obtained by using a purely analytic technique, namely the homotopy analysis method. Also the effects of the parameters β Re and λ on the velocity field are discussed through graphs.

Reduction of signal reflection along through silicon via channel in high-speed three-dimensional integration circuit

The through silicon via （TSV） technology has proven to be the critical enabler to realize a three-dimensional （3D） gigscale system with higher performance but shorter interconnect length. However, the received digital signal after trans- mission through a TSV channel, composed of redistribution layers （RDLs）, TSVs, and bumps, is degraded at a high data-rate due to the non-idealities of the channel. We propose the Chebyshev multisection transformers to reduce the signal reflec- tion of TSV channel when operating frequency goes up to 20 GHz, by which signal reflection coefficient （$11） and signal transmission coefficient （$21） are improved remarkably by 150% and 73.3%, respectively. Both the time delay and power dissipation are also reduced by 4% and 13.3%, respectively. The resistance-inductance-conductance-capacitance （RLGC） elements of the TSV channel are iterated from scattering （S）-parameters, and the proposed method of weakening the signal reflection is verified using high frequency simulator structure （HFSS） simulation software by Ansoft.

Three-dimensional channel flow of second grade fluid in rotating frame

An analysis is performed for the hydromagnetic second grade fluid flow between two horizontal plates in a rotating system in the presence of a magnetic field. The lower sheet is considered to be a stretching sheet, and the upper sheet is a porous solid plate. By suitable transformations, the equations of conservation of mass and momentum are reduced to a system of coupled non-linear ordinary differential equations. A series of solutions to this coupled non-linear system are obtained by a powerful analytic technique, i.e., the homotopy analysis method （HAM）. The results are presented with graphs. The effects of non-dimensional parameters R, A, M2, a, and K2 on the velocity field are discussed in detail.

Numerical study on three-dimensional flow field of continuously rotating detonation in a toroidal chamber

Gaseous detonation propagating in a toroidal chamber was numerically studied for hydrogen/oxygen/nitrogen mixtures. The numerical method used is based on the three-dimensional Euler equations with detailed finiterate chemistry. The results show that the calculated streak picture is in qualitative agreement with the picture recorded by a high speed streak camera from published literature. The three-dimensional flow field induced by a continuously rotating detonation was visualized and distinctive features of the rotating detonations were clearly depicted. Owing to the unconfined character of detonation wavelet, a deficit of detonation parameters was observed. Due to the effects of wall geometries, the strength of the outside detonation front is stronger than that of the inside portion. The detonation thus propagates with a constant circular velocity. Numerical simulation also shows three-dimensional rotating detonation structures, which display specific feature of the detonation- shock combined wave. Discrete burning gas pockets are formed due to instability of the discontinuity. It is believed that the present study could give an insight into the interest- ing properties of the continuously rotating detonation, and is thus beneficial to the design of continuous detonation propulsion systems.

Infinite Three-Dimensional Coordination Polymers: Synthesis and Structures of [Cd (4,4'-bpy)_2 (H_2O)_2]_n (pic)_(2n),[Zn (4,4'-bpy)_2 (H_2O)_2]_n(pic)_(2n) (H_2O)_(2n), and [Zn (4,4'-bpy)_2 (H_2O)_2]_n (4,4'-bpy)_n(H_2O)_n (pic)_(2n)

Three Complexes of the formula [Cd (4,4'-bpy)_2 (H_2O)_2]_n. (pic)_(2n) (1) [Zn (4,4'-bpy)_2 (H_2O)]_n (4,4'-bpy)_n(H_2O)_n (pic)-(2n) (2) and [Zn (4,4'-bpy)_2 (H_2O)]_n (4,4'-bpy)_n (pic)-(2n)(H_2O)_n (3) (4.4'-bpy = 4.4'-bipyridine. pic = picric anion ) have been synthesized and characterized by elemental analysis and single-crystal x-ray diffraction. They all have infinite three-dimensional network structure. crystallizing in the monoclinic space group C2/c (1) and Cc (2.3).

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

Algebraic Calculation Method of One-Dimensional Steady Compressible Gas Flow

This paper describes a new method of calculation of one-dimensional steady compressible gas flows in channels with possible heat and mass exchange through perforated sidewalls. The channel is divided into small elements of a finite size for which mass, energy and momentum conservation laws are written in the integral form, assuming linear distribution of the parameters along the length. As a result, the calculation is reduced to finding the roots of a quadratic algebraic equation, thus providing an alternative to numerical methods based on differential equations. The advantage of this method is its high tolerance to coarse discretization of the calculation area as well as its good applicability for transonic flow calculations.

Research of Tile Type Transceiver Module Integrating with Two-Dimensional Sum Difference Network

Transceiver module and two-dimensional sum difference network are important components of phased array antenna. In this paper, multilayer printed board is used to integrate millimeter wave multi-channel transceiver circuit and sum difference network. The interconnection between them is realized through RF coaxial vertical transition. At the same time, the heat dissipation design and inter channel shielding design of the module are carried out. The RF and low frequency required by the module are completed through the wiring between and within the dielectric plate layers. Finally, 128 arrays are fabricated and verified by multi-channel passive test. The results show that the type transceiver module integrating with two-dimensional sum difference network has good performance, and 128 channels have excellent amplitude and phase characteristics. The integration technology has the characteristics of lightweight, miniaturization, high integration and low manufacturing cost. It can be widely used in miniaturized phased array antennas.

Hall Effects on Unsteady MHD Three Dimensional Flow through a Porous Medium in a Rotating Parallel Plate Channel with Effect of Inclined Magnetic Field

In this paper, we make an initial value investigation of the unsteady flow of incompressible viscous fluid between two rigid non-conducting rotating parallel plates bounded by a porous medium under the influence of a uniform magnetic field of strength H0 inclined at an angle of inclination α with normal to the boundaries taking hall current into account. The perturbations are created by a constant pressure gradient along the plates in addition to the non-torsional oscillations of the upper plate while the lower plate is at rest. The flow in the porous medium is governed by the Brinkman’s equations. The exact solution of the velocity in the porous medium consists of steady state and transient state. The time required for the transient state to decay is evaluated in detail and the ultimate quasi-steady state solution has been derived analytically. Its behaviour is computationally discussed with reference to the various governing parameters. The shear stresses on the boundaries are also obtained analytically and their behaviour is computationally discussed.

Deep learning for fast channel estimation in millimeter-wave MIMO systems

Channel estimation has been considered as a key issue in the millimeter-wave(mmWave)massive multi-input multioutput(MIMO)communication systems,which becomes more challenging with a large number of antennas.In this paper,we propose a deep learning(DL)-based fast channel estimation method for mmWave massive MIMO systems.The proposed method can directly and effectively estimate channel state information(CSI)from received data without performing pilot signals estimate in advance,which simplifies the estimation process.Specifically,we develop a convolutional neural network(CNN)-based channel estimation network for the case of dimensional mismatch of input and output data,subsequently denoted as channel(H)neural network(HNN).It can quickly estimate the channel information by learning the inherent characteristics of the received data and the relationship between the received data and the channel,while the dimension of the received data is much smaller than the channel matrix.Simulation results show that the proposed HNN can gain better channel estimation accuracy compared with existing schemes.

基于时频域融合和ECA-1DCNN的航空串联故障电弧检测

为了快速准确地检测航空交流线路中出现的串联故障电弧,提出了一种基于时频域融合和加入高效注意力机制(efficient channel attention, ECA)的一维卷积神经网络(one-dimensional convolutional neural network, 1DCNN)的故障检测算法。首先,搭建航空交流电弧故障实验平台,负载选择多类型、多参数值进行电流信号的采集;其次,为了保留更多的故障信息,分析其特征频段,经过大量数据验证,航空串联电弧在发生时,1 000~4 000 Hz分量具有一定的占比,因此将原始信号与特征频段进行融合,融合后的一维数据作为模型输入;最后,搭建ECA-1DCNN检测模型,进行训练,并通过K折交叉验证模型的有效性,得到测试集平均准确率为97.96%。该方法网络层数较少,计算快速,避免了复杂时频域计算过程,较为智能,对航空串联电弧检测装置的研究提供了理论参考。

CO_2-triggered gelation for mobility control and channeling blocking during CO_2 flooding processes

CO2 flooding is regarded as an important method for enhanced oil recovery （EOR） and greenhouse gas control. However, the heterogeneity prevalently dis- tributed in reservoirs inhibits the performance of this technology. The sweep efficiency can be significantly reduced especially in the presence of ＂thief zones＂. Hence, gas channeling blocking and mobility control are important technical issues for the success of CO2 injection. Normally, crosslinked gels have the potential to block gas channels, but the gelation time control poses challenges to this method. In this study, a new method for selectively blocking CO2 channeling is proposed, which is based on a type of CO2-sensitive gel system （modified polyacry- lamide-methenamine-resorcinol gel system） to form gel in situ. A CO2-sensitive gel system is when gelation or solidification will be triggered by CO2 in the reservoir to block gas channels. The CO2-sensitivity of the gel system was demonstrated in parallel bottle tests of gel in N2 and CO2 atmospheres. Sand pack flow experiments were con- ducted to investigate the shutoff capacity of the gel system under different conditions. The injectivity of the gel system was studied via viscosity measurements. The results indi- cate that this gel system was sensitive to CO2 and had good performance of channeling blocking in porous media. Advantageous viscosity-temperature characteristics were achieved in this work. The effectiveness for EOR in heterogeneous formations based on this gel system was demonstrated using displacement tests conducted in double sand packs. The experimental results can provide guideli- nes for the deployment of theCO2-sensitive gel system for field applications.

MIMO Channel Measurement and Characterization at 6.0-6.4 GHz Under Typical Classroom Environment

An extensive 4 x 4 MIMO channel measurement is carried out at 6. 0-6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The results on path loss, delay spread and spatial correlation are presented. The measurement shows that, for corridor coverage, 2x2 MIMO is more economical than 4x4 MIMO due to high correlation. In order to identify the unique characteristics at the high frequency band, the measured channel parameters at 6. 0-6.4 GHz are compared with those at 2. 45 GHz. The comparison shows that the shortened wavelength of this higher frequency band results in a great difference of channel characteristics. Therefore, our measurement results provide new gnidance for the design and development of the system working on 6. 0-6.4 GHz band.

Cognitive amplify-and-forward dual-hop relay networks over α-μ fading channels

This paper provides an analytic performance evaluation of dual-hop cognitive amplify-and-forward (AF) relaying networks over independent nonidentically distributed (i.n.i.d.) fading channels. Two different transmit power constraint strategies at the secondary network are proposed to investigate the performance of the secondary network. In the case of combined power constraint,the maximum tolerable interference power on the primary network and the maximum transmit power at the secondary network are considered. Closed-form lower bound and its asymptotic expression for the outage probability (OP) are achieved. Utilizing the above results,average symbol error probability (ABEP) at high signal-to-noise ratios (SNRs) are also derived. In order to further study the performance of dual-hop cognitive AF relaying networks,the Closed-form lower bounds and asymptotic expressions for OP with single power constraint of the tolerable interference on the primary network is also obtained. Both analytical and simulation are employed to validate the accuracy of the theoretical analysis. The results show that the secondary network obtains a better performance when higher power constraint is employed.

Multi-scale analysis of subgrid stress and energy dissipation in turbulent channel flow

In present study, the subgrid scale （SGS） stress and dissipation for multiscale formulation of large eddy simulation are analyzed using the data of turbulent channel flow at Ret = 180 obtained by direct numerical simulation. It is found that the small scale SGS stress is much smaller than the large scale SGS stress for all the stress components. The dominant contributor to large scale SGS stress is the cross stress between small scale and subgrid scale motions, while the cross stress between large scale and subgrid scale motions make major contributions to small scale SGS stress. The energy transfer from resolved large scales to subgrid scales is mainly caused by SGS Reynolds stress, while that between resolved small scales and subgrid scales are mainly due to the cross stress. The multiscale formulation of SGS models are evaluated a priori, and it is found that the small- small model is superior to other variants in terms of SGS dissipation.

Types of voltage-dependent calcium channels involved in high potassium depolarization-induced amylase secretion in the exocrine pancreatic tumour cell line AR4-2J

In the perifused fura-2 loaded exocrine pancreatic acinar cell line AR4-2J pulses of high potassium induced repetitive increases in intracellular calcium. Attached cells when stimulated with high potassium secreted large amount of amylase. High potassium-induced secretion was dependent both on the concentration of potassium and duration of stimulation. High potassium induced increases in intracellular calcium were inhibited by voltage-dependent calcium channel antagonists with an order of potency as follows: nifedipine > ω-agatoxin IVA > ω-conotoxin GVIA. In contrast, the L-type calcium channel antagonist nifedipine almost completely inhibited potassium-induced amylase secretion, whereas the N-type channel antagonist ω-conotoxin GVIA was without effect. The P-type channel antagonist ω-agatoxin IVA had a small inhibitory effect, but this inhibition was not significant at the level of amylase secretion. In conclusion, the AR4-2J cell line possesses different voltage-dependent calcium channels (L, P,N) with the L-type predominantly involved in depolarization induced amylase secretion.

Performance Analysis of Physical Layer Security over α-η-κ-μ Fading Channels

In this paper, we consider the secure data transmission over α-η-κ-μ fading channels, which are recently proposed to encompass nearly all the well-known statistical models adopted in the literature. In particular, we address the secrecy performance in terms of the average secrecy capacity(ASC) and the secrecy outage probability(SOP), for which novel analytical expressions are derived. Simulation results verify the analysis and demonstrate the impact of the physical parameters on the secrecy performance of this new channel fading model.

Influence of bed elevation discordance on flow patterns and head losses in an open-channel confluence

Confluences play a major role in the dynamics of networks of natural and man-made open channels, and field measurements on river confluences reveal that discordance in bed elevation is common.Studies of schematized confluences with a step at the interface between the tributary and the main channel bed reveal that bed elevation discordance is an important additional control for the confluence hydrodynamics.This study aimed to improve understanding of the influence of bed elevation discordance on the flow patterns and head losses in a right-angled confluence of an open channel with rectangular cross-sections.A large eddy simulation (LES)-based numerical model was set up and validated with experiments by others.Four configurations with different bed discordance ratios were investigated.The results confirm that, with increasing bed elevation discordance, the tributary streamlines at the confluence interface deviate less from the geometrical confluence angle, the extent of the recirculation zone (RZ) gets smaller, the ratio of the water depth upstream to that downstream of the confluence decreases, and the water level depression reduces.The bed elevation discordance also leads to the development of a large-scale structure in the lee of the step.Despite the appearance of the large-scale structure, the reduced extent of the RZ and associated changes in flow deflection/contraction reduce total head losses experienced by the main channel with an increase of the bed discordance ratio.It turns out that bed elevation discordance converts the lateral momentum from the tributary to streamwise momentum in the main channel more efficiently.

Parametric study on single shot peening by dimensional analysis method incorporated with finite element method

Shot peening is a widely used surface treatment method by generating compressive residual stress near the surface of metallic materials to increase fatigue life and re- sistance to corrosion fatigue, cracking, etc. Compressive re- sidual stress and dent profile are important factors to eval- uate the effectiveness of shot peening process. In this pa- per, the influence of dimensionless parameters on maximum compressive residual stress and maximum depth of the dent were investigated. Firstly, dimensionless relations of pro- cessing parameters that affect the maximum compressive residual stress and the maximum depth of the dent were de- duced by dimensional analysis method. Secondly, the in- fluence of each dimensionless parameter on dimensionless variables was investigated by the finite element method. Fur- thermore, related empirical formulas were given for each di- mensionless parameter based on the simulation results. Fi- nally, comparison was made and good agreement was found between the simulation results and the empirical formula, which shows that a useful approach is provided in this pa- per for analyzing the influence of each individual parameter.