Two-axis underwater channel often exists in deep ocean. Because of the coupling between surface channel and SOFAR channel, sound propagation in the two-axis underwater channel is complex and so its calculations of aco...Two-axis underwater channel often exists in deep ocean. Because of the coupling between surface channel and SOFAR channel, sound propagation in the two-axis underwater channel is complex and so its calculations of acoustic fields are difficult. The beam-displacement ray-mode （BDRM） theory is a normal mode method for propagation modeling in the common horizontally stratified shallow water. We improve the theory, proposing a new method for computing the upper boundary reflection coefficient, and apply it to calculate the acoustic fields of two-axis underwater channel. Transmission losses in the two-axis underwater channel are calculated by the BDRM theory. The results are in good agreement with the KRAKEN code and the computational speed excels those of the other methods.展开更多
Optical glass is the most widely used optical material.It is necessary to measure its geometric characteristic quickly and reliably to meet the quality of optical glass.A vision measuring system combining photoelectri...Optical glass is the most widely used optical material.It is necessary to measure its geometric characteristic quickly and reliably to meet the quality of optical glass.A vision measuring system combining photoelectric autocollimation system with high-precision rotary stage is designed to measure the parallelismand angle of optical glass plane.A novel method is proposed to overcome the difficulty ofmeasuring parallelismof optical glass.The model of parallelism and angle measurement is established and the feasibility is analyzed.The image processing algorithm combining Steger algorithm with the least square method is selected.The uncertainty of angle measurement system for angle measurement is 3.0″.The system can solve the problem of measuring the angle of optical glass with high precision and has important significance for optical system.展开更多
Two-axis transportable satellite antennas(TATSAs) have been widely adopted owing to its simple structure and low cost. However, by searching in a wide range, it will take a very long searching time. Under extreme cond...Two-axis transportable satellite antennas(TATSAs) have been widely adopted owing to its simple structure and low cost. However, by searching in a wide range, it will take a very long searching time. Under extreme conditions, it will even fail to work. In this paper, we propose a novel roll compensation(RC) method for the low-cost TATSAs to achieve faster tracking even if when the antenna has no azimuth sensor. By analyzing the influence of roll axis on the system performance, details of the compensation method are derived. Simulation and measurement results indicate that the proposed RC method can effectively reduce the initial searching time for satellite communication. In addition, tracking along with the ellipse path with the RC method provides the highest tracking efficiency.展开更多
Sound propagation in a deep ocean two-axis underwater channel is often complex and difficult to simulate between surface channel and sound fixing and ranging (SOFAR) channel. The beam-displacement ray-mode (BDRM) theo...Sound propagation in a deep ocean two-axis underwater channel is often complex and difficult to simulate between surface channel and sound fixing and ranging (SOFAR) channel. The beam-displacement ray-mode (BDRM) theory is a normal mode method for propagation modeling in horizontally stratified shallow water. An improved method for computing the upper boundary reflection coefficient in the BDRM is proposed and applied to calculate the acoustic fields of a two-axis underwater channel. Transmission losses in the two-axis underwater channel are calculated in the new BDRM. The corresponding results are in good agreement with those from the Kraken code, and furthermore the computed speed of the new BDRM excels the other methods.展开更多
Multi-mode cavities have now attracted much attention both experimentally and theoretically. In this paper, inspired by recent experiments of cavity-assisted Raman transitions, we realize a two-axis spin Hamiltonian H...Multi-mode cavities have now attracted much attention both experimentally and theoretically. In this paper, inspired by recent experiments of cavity-assisted Raman transitions, we realize a two-axis spin Hamiltonian H = q（J_x^2＋ χJ_y^2） ＋ ω_0J_z in two cavities. This realized Hamiltonian has a distinct property that all parameters can be tuned independently. For proper parameters, the well-studied one- and two-axis twisting Hamiltonians are recovered, and the scaling of N^（-1） of the maximal squeezing factor can occur naturally. On the other hand, in the two-axis twisting Hamiltonian, spin squeezing is usually reduced when increasing the atomic resonant frequency ω_0. Surprisingly, we find that by combining with the dimensionless parameter χ（-1）, this atomic resonant frequency ω_0 can enhance spin squeezing greatly. These results are beneficial for achieving the required spin squeezing in experiments.展开更多
The theory and algorithm of Singular Value Decomposition(SVD) is introduced.The advantage of Singular Value Decomposition used in system identification is studied,compared and illustrated through analyzing the data of...The theory and algorithm of Singular Value Decomposition(SVD) is introduced.The advantage of Singular Value Decomposition used in system identification is studied,compared and illustrated through analyzing the data of navigational gyroscopes drift in two-axis servo testing.展开更多
We study the feasibility of endoscopic optical Doppler tomography with a micro-electro-mechanical system(MEMS) mirror based probe. The additional phase shifts introduced by the probe are tracked and formulated.The sup...We study the feasibility of endoscopic optical Doppler tomography with a micro-electro-mechanical system(MEMS) mirror based probe. The additional phase shifts introduced by the probe are tracked and formulated.The suppression method of the probe phase shifts is proposed and validated by fluid flow detection experiments.In vivo blood flow detection is also implemented on a hairless mouse. The velocities of the blood flow in two directions are obtained to be-8.1 mm/s and 6.6 mm/s, respectively.展开更多
Optical-electronic autocollimation method is commonly used to measure straightness of precision guides in engineering application. However, the traditional fixed interval optical-electronic autocollimation method is n...Optical-electronic autocollimation method is commonly used to measure straightness of precision guides in engineering application. However, the traditional fixed interval optical-electronic autocollimation method is not suitable for measuring straightness of an air-bearing guide with a long air-bearing bush or a precision straight guide with a long slide-carriage, because the air-bearing bush and the slidecarriage are actually taken as a big bridgeboard bigger than the length of the bridgeboard with the reflector, which is about 1/4-1/2 of total length of the measured guide. If straightness is measured according to the traditional method, only a few points are sampled so that the guide straightness can not be evaluated fully or accurately. In order to solve the problem, an alterable measuring interval method is proposed for straightness measurement based on analyzing the mutual relations and effects among the tilting angle of the reflector, the length of the bridgeboard, the measuring interval and the straightness of the guide. A straightness calculation model is also developed using the method, and the errors stemming from the method proposed are introduced in brief. A precision air-bearing guide with a long air-bearing bush is measured and evaluated using the method proposed, and the actual measurement and evaluation results prove that the method is correct in theory and practical in operation. The method proposed gives an effective and flexible solution to the straightness measurement of the precision guide with long slide-carriage or air-bearing bush in application. It is an extension of the traditional optical-electronic autocollimation method for straightness measurement.展开更多
文摘Two-axis underwater channel often exists in deep ocean. Because of the coupling between surface channel and SOFAR channel, sound propagation in the two-axis underwater channel is complex and so its calculations of acoustic fields are difficult. The beam-displacement ray-mode （BDRM） theory is a normal mode method for propagation modeling in the common horizontally stratified shallow water. We improve the theory, proposing a new method for computing the upper boundary reflection coefficient, and apply it to calculate the acoustic fields of two-axis underwater channel. Transmission losses in the two-axis underwater channel are calculated by the BDRM theory. The results are in good agreement with the KRAKEN code and the computational speed excels those of the other methods.
基金supported in part by the National Natural Science Foundation of China under Grant 51805367part by the Natural Science Foundation of Tianjin under Grant 17JCTPJC54200 and Grant 18JCQNJC04800
文摘Optical glass is the most widely used optical material.It is necessary to measure its geometric characteristic quickly and reliably to meet the quality of optical glass.A vision measuring system combining photoelectric autocollimation system with high-precision rotary stage is designed to measure the parallelismand angle of optical glass plane.A novel method is proposed to overcome the difficulty ofmeasuring parallelismof optical glass.The model of parallelism and angle measurement is established and the feasibility is analyzed.The image processing algorithm combining Steger algorithm with the least square method is selected.The uncertainty of angle measurement system for angle measurement is 3.0″.The system can solve the problem of measuring the angle of optical glass with high precision and has important significance for optical system.
基金jointly sponsored by scientific research foundation NUPTSF(Grant No.NY-214144 and Grant No.NY-215073)NSFC(Grant No.61701260)
文摘Two-axis transportable satellite antennas(TATSAs) have been widely adopted owing to its simple structure and low cost. However, by searching in a wide range, it will take a very long searching time. Under extreme conditions, it will even fail to work. In this paper, we propose a novel roll compensation(RC) method for the low-cost TATSAs to achieve faster tracking even if when the antenna has no azimuth sensor. By analyzing the influence of roll axis on the system performance, details of the compensation method are derived. Simulation and measurement results indicate that the proposed RC method can effectively reduce the initial searching time for satellite communication. In addition, tracking along with the ellipse path with the RC method provides the highest tracking efficiency.
基金This project was supported by National Defense Research Found (No. 9140A03050206JB1501)
文摘Sound propagation in a deep ocean two-axis underwater channel is often complex and difficult to simulate between surface channel and sound fixing and ranging (SOFAR) channel. The beam-displacement ray-mode (BDRM) theory is a normal mode method for propagation modeling in horizontally stratified shallow water. An improved method for computing the upper boundary reflection coefficient in the BDRM is proposed and applied to calculate the acoustic fields of a two-axis underwater channel. Transmission losses in the two-axis underwater channel are calculated in the new BDRM. The corresponding results are in good agreement with those from the Kraken code, and furthermore the computed speed of the new BDRM excels the other methods.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11422433,11447028,61227902,11434007,and 61275211)the Natural Science Foundation of Zhejiang Province,China(Grant No.LY13A040001)the Scientific Research Foundation of the Education Department of Zhejiang Province,China(Grant No.Y201122352)
文摘Multi-mode cavities have now attracted much attention both experimentally and theoretically. In this paper, inspired by recent experiments of cavity-assisted Raman transitions, we realize a two-axis spin Hamiltonian H = q（J_x^2＋ χJ_y^2） ＋ ω_0J_z in two cavities. This realized Hamiltonian has a distinct property that all parameters can be tuned independently. For proper parameters, the well-studied one- and two-axis twisting Hamiltonians are recovered, and the scaling of N^（-1） of the maximal squeezing factor can occur naturally. On the other hand, in the two-axis twisting Hamiltonian, spin squeezing is usually reduced when increasing the atomic resonant frequency ω_0. Surprisingly, we find that by combining with the dimensionless parameter χ（-1）, this atomic resonant frequency ω_0 can enhance spin squeezing greatly. These results are beneficial for achieving the required spin squeezing in experiments.
文摘The theory and algorithm of Singular Value Decomposition(SVD) is introduced.The advantage of Singular Value Decomposition used in system identification is studied,compared and illustrated through analyzing the data of navigational gyroscopes drift in two-axis servo testing.
基金Supported by the National Natural Science Foundation of China under Grant No 61705199the Natural Science Foundation of Henan Province under Grant No 162300410317+2 种基金the Henan Science and Technology Project under Grant Nos 162102310576and 172102210542the Zhengzhou Science and Technology Project under Grant No 153PKJGG125the US National Science Foundation under Grant No 1002209
文摘We study the feasibility of endoscopic optical Doppler tomography with a micro-electro-mechanical system(MEMS) mirror based probe. The additional phase shifts introduced by the probe are tracked and formulated.The suppression method of the probe phase shifts is proposed and validated by fluid flow detection experiments.In vivo blood flow detection is also implemented on a hairless mouse. The velocities of the blood flow in two directions are obtained to be-8.1 mm/s and 6.6 mm/s, respectively.
基金This project is supported by National Natural Science Foundation of China (No.50175081).
文摘Optical-electronic autocollimation method is commonly used to measure straightness of precision guides in engineering application. However, the traditional fixed interval optical-electronic autocollimation method is not suitable for measuring straightness of an air-bearing guide with a long air-bearing bush or a precision straight guide with a long slide-carriage, because the air-bearing bush and the slidecarriage are actually taken as a big bridgeboard bigger than the length of the bridgeboard with the reflector, which is about 1/4-1/2 of total length of the measured guide. If straightness is measured according to the traditional method, only a few points are sampled so that the guide straightness can not be evaluated fully or accurately. In order to solve the problem, an alterable measuring interval method is proposed for straightness measurement based on analyzing the mutual relations and effects among the tilting angle of the reflector, the length of the bridgeboard, the measuring interval and the straightness of the guide. A straightness calculation model is also developed using the method, and the errors stemming from the method proposed are introduced in brief. A precision air-bearing guide with a long air-bearing bush is measured and evaluated using the method proposed, and the actual measurement and evaluation results prove that the method is correct in theory and practical in operation. The method proposed gives an effective and flexible solution to the straightness measurement of the precision guide with long slide-carriage or air-bearing bush in application. It is an extension of the traditional optical-electronic autocollimation method for straightness measurement.
