Effect of particle size and grain composition on two-dimensional infiltration process of weathered crust elution-deposited rare earth ores

The two-dimensional infiltration experiment was carried out by means of digital image technology.The evolution process of the wetting body was described.The wetted front distance and the time show a very significant power function relationship.The horizontal wetted distance is larger than the vertical wetted distance in the initial stage.Then,the vertical distance of the wetted body gradually approaches to the horizontal distance.The infiltration distance decreases as the content of fine particles increases.The wetted front migration rate curve shows a three-stage change law,and it increases with the increase of coarse particle content.The directional velocity ratio is defined.The initial value of horizontal infiltration rate is larger than that of vertical one,and then the vertical infiltration rate is gradually close to the horizontal value.The empirical relationship between the characteristic particle size and the stable infiltration rate is established,which provides a theoretical basis for the prediction of the stable infiltration rate in in-situ leaching.

Image Thresholding Using Two-Dimensional Tsallis Cross Entropy Based on Either Chaotic Particle Swarm Optimization or Decomposition

The segmentation effect of Tsallis entropy method is superior to that of Shannon entropy method, and the computation speed of two-dimensional Shannon cross entropy method can be further improved by optimization. The existing two-dimensional Tsallis cross entropy method is not the strict two-dimensional extension. Thus two new methods of image thresholding using two-dimensional Tsallis cross entropy based on either Chaotic Particle Swarm Optimization (CPSO) or decomposition are proposed. The former uses CPSO to find the optimal threshold. The recursive algorithm is adopted to avoid the repetitive computation of fitness function in iterative procedure. The computing speed is improved greatly. The latter converts the two-dimensional computation into two one-dimensional spaces, which makes the computational complexity further reduced from O(L2) to O(L). The experimental results show that, compared with the proposed recently two-dimensional Shannon or Tsallis cross entropy method, the two new methods can achieve superior segmentation results and reduce running time greatly.

Effect of Particle Number Density on Wave Dispersion in a Two-Dimensional Yukawa System

Effect of the particle number density on the dispersion properties of longitudinal and transverse lattice waves in a two-dimensional Yukawa charged-dust system is investigated using molecular dynamics simulation. The dispersion relations for the waves are obtained. It is found that the frequencies of both the longitudinal and transverse dust waves increase with the density and when the density is sufficiently high a cutoff region appears at the short wavelength. With the increase of the particle number density, the common frequency tends to increase, and the sound speed of the longitudinal wave also increases, but that of the transverse wave remains low.

Global dust density in two-dimensional complex plasma

The driven-dissipative Langevin dynamics simulation is used to produce a two-dimensional(2D) dense cloud, which is composed of charged dust particles trapped in a quadratic potential. A 2D mesh grid is built to analyze the center-to-wall dust density. It is found that the local dust density in the outer region relative to that of the inner region is more nonuniform,being consistent with the feature of quadratic potential. The dependences of the global dust density on equilibrium temperature, particle size, confinement strength, and confinement shape are investigated. It is found that the particle size, the confinement strength, and the confinement shape strongly affect the global dust density, while the equilibrium temperature plays a minor effect on it. In the direction where there is a stronger confinement, the dust density gradient is bigger.

EFFECT OF SUSPENDED SOLID PARTICLES ON UNSTABILITY OF TWO-DIMENSION MIXING LAYER

By considering the effect of suspended solid particles in the ordinary equations for two-dimension inviscid incompressible mixing layer, the Rayleigh equation and the modified Rayleigh equation are obtained. And then, by solving the corresponding eigen-value equations with numerical computational method, the relation curves between perturbation frequency and spacial growth rate of the mixing layer for the varying particle loading, ratio of particle velocity to fluid velocity and Stokes number are got. Sever al important conclusions on the effect of suspended solid particles on unstability of the mixing layer are presented in the end by analyzing all the relation curves.

Current Trends in Pickering Emulsions: Particle Morphology and Applications

In recent years,Pickering emulsions and their applications have attracted a great deal of attention due to their special features,which include easy preparation and enhanced stability.In contrast to classical emulsions,in Pickering emulsions,solid microparticles or nanoparticles that localize at the interface between liquids are used as stabilizers,instead of surfactants,to enhance the droplet lifetime.Furthermore,Pickering emulsions show higher stability,lower toxicity,and stimuli-responsiveness,compared with emulsions that are stabilized by surfactants.Therefore,they can be considered attractive components for various uses,such as photocatalysis and the preparation of new materials.Moreover,the nanoparticle morphology strongly influences Pickering emulsion stability as well as the potential utilization of such emulsions.Here,we review recent findings concerning Pickering emulsions,with a particular focus on how the nanoparticles morphology(i.e.,cube,ellipsoid,nanosheet,sphere,cylinder,rod,peanut)influences the type and stability of such emulsions,and their current applications in different fields such as antibacterial activity,protein recognition,catalysis,photocatalysis,and water purification.

New two-dimensional fuzzy C-means clustering algorithm for image segmentation

To solve the problem of poor anti-noise performance of the traditional fuzzy C-means (FCM) algorithm in image segmentation, a novel two-dimensional FCM clustering algorithm for image segmentation was proposed. In this method, the image segmentation was converted into an optimization problem. The fitness function containing neighbor information was set up based on the gray information and the neighbor relations between the pixels described by the improved two-dimensional histogram. By making use of the global searching ability of the predator-prey particle swarm optimization, the optimal cluster center could be obtained by iterative optimization, and the image segmentation could be accomplished. The simulation results show that the segmentation accuracy ratio of the proposed method is above 99%. The proposed algorithm has strong anti-noise capability, high clustering accuracy and good segment effect, indicating that it is an effective algorithm for image segmentation.

Adaptive stochastic resonance method for weak signal detection based on particle swarm optimization

In order to solve the parameter adjustment problems of adaptive stochastic resonance system in the areas of weak signal detection,this article presents a new method to enhance the detection efficiency and availability in the system of two-dimensional Duffing based on particle swarm optimization.First,the influence of different parameters on the detection performance is analyzed respectively.The correlation between parameter adjustment and stochastic resonance effect is also discussed and converted to the problem of multi-parameter optimization.Second,the experiments including typical system and sea clutter data are conducted to verify the effect of the proposed method.Results show that the proposed method is highly effective to detect weak signal from chaotic background,and enhance the output SNR greatly.

采用多元颗粒模型对圆柱形颗粒在移动床中流动的离散单元法直接数值模拟

为了研究活性焦颗粒在移动床内的流动特性,通过离散单元法直接数值模拟方法对活性焦即圆柱形颗粒在移动床内的流动进行了数值模拟。采用多元颗粒模型来描述圆柱形颗粒,即圆柱形颗粒通过几个叠加在一起的球元构成。建立了圆柱形颗粒的碰撞机制,分析了圆柱形颗粒在流动时的受力情况,并通过实验验证多元颗粒模型的可靠性。从宏观和微观2个方面,比较圆柱形颗粒2种构建方式(2球元和3球元)下的模拟结果。结果表明:2球元和3球元构建的圆柱形颗粒在动能、转动动能、变形量、碰撞力、碰撞次数等微观方面的差别较大。且通过比较颗粒位置图和下料率可以看出,3球元圆柱形颗粒的模拟结果与实际结果更加相符,因此,选择3球元作为圆柱形颗粒的构建方式。

砂井地基堆载沉降的PFC^(2D)模拟

砂井是利用土的排水固结原理来处理软弱地基的代表性施工技术。针对现有的软基沉降计算和预测方法存在的不足,利用离散单元法中二维颗粒元法PFC2D建立了砂井二维模型,对砂井地基堆载沉降过程进行二维离散元仿真模拟。采用由2～7个不同组合方式的簇单元来体现软基的孔隙率,改进了PFC2D中的水位降深模型,分析了软基沉降过程中水位的变化规律。模拟与现场实测结果的对比表明:模拟沉降值与实测值基本吻合。

Meso-level simulation of gas hydrate dissociation in low-permeability sediments

This paper presents a meso-level simulation of gas hydrate dissociation in low-permeability marine sediments. Interstitial pores are defined to describe fluid flow and particle movement. The proposed model couples multiphase fluid flow with particle movement to simulate the thermodynamics of gas hydrate dissociation triggered by sharp temperature rises. Hydrates respond quickly to temperature rise in low-permeability sediments. Dissociation causes pore pressure to rise rapidly to equilibrium then steadily increase above equilibrium pressure. Lower permeability sediment builds up greater excess pore pressure as the dissipation of pore pressure is constrained.

Phase Behaviors of Soft-core Particle Systems

This paper reviews some of our recent works on phase behaviors of particulate systems with a soft-core interaction potential. The potential is purely repulsive and bounded, i.e., it is finite even when two particles completely overlap. The one-sided linear spring (harmonic) potential is one of the representatives. This model system has been successively employed to study the jamming transition, i.e., the formation of rigid and disordered packings of hard particles, and establish the jamming physics. This is actually based on the "hard" aspect of the potential, because at low densities and when particle overlap is tiny the potential resembles the hard sphere limit. At high densities, the potential exhibits its "soft" aspect: with the increase of density, there are successive reentrant crystallizations with many types of solid phases. Taking advantage of the dual nature of the potential, we investigate the criticality of the jamming transition from different perspectives, extend the jamming scenario to high densities, reveal the novel density evolution of two-dimensional melting, and find unexpected formation of quasicrystals. It is surprising that such a simple potential can exhibit so rich and unexpected phenomena in phase transitions. The phase behaviors discussed in this paper are also highly regarded in polymer science, which may thus shed light on our understanding of polymeric systems or inspire new ideas in studies of polymers.

Investigation on surface roughness,residual stress and fatigue property of milling in-situ TiB_2/7050Al metal matrix composites

For higher efficiency and precision manufacturing,more and more attentions are focused on the surface roughness and residual stress of machined parts to obtain a good fatigue life.At present,the in-situ TiB_2/7050 Al metal matrix composites are widely researched due to its attractive properties such as low density,good wear resistance and improved strength.It is of great significance to investigate the machined surface roughness,residual stress and fatigue life for higher efficiency and precision manufacturing of this new kind material.In this study,the surface roughness including two-dimensional and three-dimensional roughness,residual stress and fatigue life of milling in-situ TiB_2/7050 Al metal matrix composites were analyzed.It was found from comparative investigation that the three-dimensional surface roughness would be more appropriate to represent the machined surface profile of milling particle reinforced metal matrix composites.The cutting temperature played a great role on the residual stress.However,the effect of increasing cutting force could slow down the transformation from compressive stress to tensile stress under 270°C.An exponential relationship between three-dimensional roughness and fatigue life was established and the main fracture mechanism was brittle fracture with observation of obvious shellfish veins,river pattern veins and wave shaped veins in fracture surface.