针对目前基于信道脉冲响应(Channel Impulse Response,CIR)的非视距(None Line of Sight,NLoS)/视距(Line of Sight,LoS)识别方法精度低、泛化能力差的问题,提出了一种多层卷积神经网络(Convolutional Neural Network,CNN)与通道注意力...针对目前基于信道脉冲响应(Channel Impulse Response,CIR)的非视距(None Line of Sight,NLoS)/视距(Line of Sight,LoS)识别方法精度低、泛化能力差的问题,提出了一种多层卷积神经网络(Convolutional Neural Network,CNN)与通道注意力模块(Channel Attention Module,CAM)相结合的NLoS/LoS识别方法。在多层CNN中嵌入CAM提取原始CIR的时域数据特征,利用全局平均池化层代替全连接层进行特征整合并分类输出。使用欧洲地平线2020计划项目eWINE公开的数据集进行不同结构模型和不同识别方法的对比实验,结果表明,所提出的CNN-CAM模型LoS和NLoS召回率分别达到了92.29%与87.71%,准确率达到了90.00%,F1分数达到了90.22%。与现有多种传统识别方法相比,均具有更好的识别效果。展开更多
UFLD(ultra fast structure aware deep lane detection)是一种轻量化车道线检测模型,为提升模型的检测精度,对模型进行改进。引入CAM(channel attention mechanism)使模型能更关注携带重要车道线信息的特征通道和像素;为了感知车道线...UFLD(ultra fast structure aware deep lane detection)是一种轻量化车道线检测模型,为提升模型的检测精度,对模型进行改进。引入CAM(channel attention mechanism)使模型能更关注携带重要车道线信息的特征通道和像素;为了感知车道线的细节信息,引入ASPP(atrous spatial pyramid pooling)扩大卷积过程的感受野,提高模型分割精度;搭建引入CAM和ASPP后的改进模型,并在改进的模型上进行实验。实验结果表明:在TuSimple数据集上以ResNet18为主干网络的模型检测精度由95.81%提升至95.98%,以ResNet34为主干网络的模型检测精度由95.84%提升至96.12%;在CULane数据集上,无论是以ResNet18还是以ResNet34为主干网络模型,其平均精度均有不同程度的提高。展开更多
In this paper,a stable two-sided matching(TSM)method considering the matching intention of agents under a hesitant fuzzy environment is proposed.The method uses a hesitant fuzzy element(HFE)as its basis.First,the HFE ...In this paper,a stable two-sided matching(TSM)method considering the matching intention of agents under a hesitant fuzzy environment is proposed.The method uses a hesitant fuzzy element(HFE)as its basis.First,the HFE preference matrix is transformed into the normalized HFE preference matrix.On this basis,the distance and the projection of the normalized HFEs on positive and negative ideal solutions are calculated.Then,the normalized HFEs are transformed into agent satisfactions.Considering the stable matching constraints,a multiobjective programming model with the objective of maximizing the satisfactions of two-sided agents is constructed.Based on the agent satisfaction matrix,the matching intention matrix of two-sided agents is built.According to the agent satisfaction matrix and matching intention matrix,the comprehensive satisfaction matrix is set up.Furthermore,the multiobjective programming model based on satisfactions is transformed into a multiobjective programming model based on comprehensive satisfactions.Using the G-S algorithm,the multiobjective programming model based on comprehensive satisfactions is solved,and then the best TSM scheme is obtained.Finally,a terminal distribution example is used to verify the feasibility and effectiveness of the proposed method.展开更多
An elastoplastic constitutive model based on the Modified Cam Clay(MCC)model is developed to describe the mechanical behaviour of soils cemented via microbially induced calcite precipitation(MICP).It considers the inc...An elastoplastic constitutive model based on the Modified Cam Clay(MCC)model is developed to describe the mechanical behaviour of soils cemented via microbially induced calcite precipitation(MICP).It considers the increase of the elastic stiffness,the change of the yield surface due to MICP cementation and the degradation of calcium carbonate bonds during shearing.Specifically,to capture the typical contraction-dilation transition in MICP soils,the original volumetric hardening rule in the MCC model is modified to a combined deviatoric and volumetric hardening rule.The model could reproduce a series of drained triaxial tests on MICP-treated soils with different calcium carbonate contents.Further,we carry out a parametric study and observe numerical instability in some cases.In combination with an analytical analysis,our numerical modelling has identified the benefits and limitations of using MCCbased models in the simulation of MICP-cemented soils,leading to suggestions for further model development.展开更多
In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the...In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality.Probability hesitant fuzzy sets,however,have grown in popularity due to their advantages in communicating complex information.Therefore,this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information.The agent attribute weight vector should be obtained by using the maximum deviation method and Hamming distance.The probabilistic hesitancy fuzzy information matrix of each agent is then arranged to determine the comprehensive evaluation of two matching agent sets.The agent satisfaction degree is calculated using the technique for order preference by similarity to ideal solution(TOPSIS).Additionally,the multi-object programming technique is used to establish a TSM method with the objective of maximizing the agent satisfaction of two-sided agents,and the matching schemes are then established by solving the built model.The study concludes by providing a real-world supply-demand scenario to illustrate the effectiveness of the proposed method.The proposed method is more flexible than prior research since it expresses evaluation information using probability hesitating fuzzy sets and can be used in scenarios when attribute weight information is unclear.展开更多
文摘针对目前基于信道脉冲响应(Channel Impulse Response,CIR)的非视距(None Line of Sight,NLoS)/视距(Line of Sight,LoS)识别方法精度低、泛化能力差的问题,提出了一种多层卷积神经网络(Convolutional Neural Network,CNN)与通道注意力模块(Channel Attention Module,CAM)相结合的NLoS/LoS识别方法。在多层CNN中嵌入CAM提取原始CIR的时域数据特征,利用全局平均池化层代替全连接层进行特征整合并分类输出。使用欧洲地平线2020计划项目eWINE公开的数据集进行不同结构模型和不同识别方法的对比实验,结果表明,所提出的CNN-CAM模型LoS和NLoS召回率分别达到了92.29%与87.71%,准确率达到了90.00%,F1分数达到了90.22%。与现有多种传统识别方法相比,均具有更好的识别效果。
文摘UFLD(ultra fast structure aware deep lane detection)是一种轻量化车道线检测模型,为提升模型的检测精度,对模型进行改进。引入CAM(channel attention mechanism)使模型能更关注携带重要车道线信息的特征通道和像素;为了感知车道线的细节信息,引入ASPP(atrous spatial pyramid pooling)扩大卷积过程的感受野,提高模型分割精度;搭建引入CAM和ASPP后的改进模型,并在改进的模型上进行实验。实验结果表明:在TuSimple数据集上以ResNet18为主干网络的模型检测精度由95.81%提升至95.98%,以ResNet34为主干网络的模型检测精度由95.84%提升至96.12%;在CULane数据集上,无论是以ResNet18还是以ResNet34为主干网络模型,其平均精度均有不同程度的提高。
基金supported by the National Natural Science Foundation of China (Grant No.71861015)the Humanities and Social Science Foundation of the Ministry of Education of China (Grant No.18YJA630047)the Distinguished Young Scholar Talent of Jiangxi Province (Grant No.20192BCBL23008).
文摘In this paper,a stable two-sided matching(TSM)method considering the matching intention of agents under a hesitant fuzzy environment is proposed.The method uses a hesitant fuzzy element(HFE)as its basis.First,the HFE preference matrix is transformed into the normalized HFE preference matrix.On this basis,the distance and the projection of the normalized HFEs on positive and negative ideal solutions are calculated.Then,the normalized HFEs are transformed into agent satisfactions.Considering the stable matching constraints,a multiobjective programming model with the objective of maximizing the satisfactions of two-sided agents is constructed.Based on the agent satisfaction matrix,the matching intention matrix of two-sided agents is built.According to the agent satisfaction matrix and matching intention matrix,the comprehensive satisfaction matrix is set up.Furthermore,the multiobjective programming model based on satisfactions is transformed into a multiobjective programming model based on comprehensive satisfactions.Using the G-S algorithm,the multiobjective programming model based on comprehensive satisfactions is solved,and then the best TSM scheme is obtained.Finally,a terminal distribution example is used to verify the feasibility and effectiveness of the proposed method.
基金funded by the German Research Foundation(DFG)(Grant No.NA 330/20e1).
文摘An elastoplastic constitutive model based on the Modified Cam Clay(MCC)model is developed to describe the mechanical behaviour of soils cemented via microbially induced calcite precipitation(MICP).It considers the increase of the elastic stiffness,the change of the yield surface due to MICP cementation and the degradation of calcium carbonate bonds during shearing.Specifically,to capture the typical contraction-dilation transition in MICP soils,the original volumetric hardening rule in the MCC model is modified to a combined deviatoric and volumetric hardening rule.The model could reproduce a series of drained triaxial tests on MICP-treated soils with different calcium carbonate contents.Further,we carry out a parametric study and observe numerical instability in some cases.In combination with an analytical analysis,our numerical modelling has identified the benefits and limitations of using MCCbased models in the simulation of MICP-cemented soils,leading to suggestions for further model development.
基金supported by the National Natural Science Foundation in China(Yue Qi,Project No.71861015).
文摘In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality.Probability hesitant fuzzy sets,however,have grown in popularity due to their advantages in communicating complex information.Therefore,this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information.The agent attribute weight vector should be obtained by using the maximum deviation method and Hamming distance.The probabilistic hesitancy fuzzy information matrix of each agent is then arranged to determine the comprehensive evaluation of two matching agent sets.The agent satisfaction degree is calculated using the technique for order preference by similarity to ideal solution(TOPSIS).Additionally,the multi-object programming technique is used to establish a TSM method with the objective of maximizing the agent satisfaction of two-sided agents,and the matching schemes are then established by solving the built model.The study concludes by providing a real-world supply-demand scenario to illustrate the effectiveness of the proposed method.The proposed method is more flexible than prior research since it expresses evaluation information using probability hesitating fuzzy sets and can be used in scenarios when attribute weight information is unclear.
