The development and technical characteristics in different stages of supercritical (ultra-Supercritical) technology abroad are introduced in this paper. At the same time, according to the development trend of supercri...The development and technical characteristics in different stages of supercritical (ultra-Supercritical) technology abroad are introduced in this paper. At the same time, according to the development trend of supercritical (ultra-supercritical) technology, the corresponding revelations are given in this paper. That is: It is an inevitable choice to develop supercritical (ultra-supercritical) technology if we want to improve the thermal efficiency and heat efficiency.展开更多
Use a 1000MW ultra-supercritical tower boiler as the research object. On the basis of one dimensional model, simplify the tube heat transfer model and the radiation heat transfer model;establish the two-dimensional ar...Use a 1000MW ultra-supercritical tower boiler as the research object. On the basis of one dimensional model, simplify the tube heat transfer model and the radiation heat transfer model;establish the two-dimensional area calculation model with the regional method;?summarize the heat load distribution of flue gas temperature and water wall surface;and compare with the measured data. The error range of the result is acceptable on the project. The distribution of water wall surface heat load along the furnace width and the area where heat transfer deterioration?cause easily along the furnace height direction are studied with the model and algorithm on different boiler load conditions. All these provide the reference for the design and operation of the ultra supercritical boiler.展开更多
Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature ...Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature system of USC unit.Closed-loop SMI is applied to building step response model of the unit directly.The parameters selection method is proposed to deal with the parameter sensitivity and improve the reliability of the model.Finally,the model is used in model identification of real USC unit.展开更多
Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At ap...Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film展开更多
By means of ultra-violet(UV)irradiation with photoini-tiator and multifunctional crosslinking agent,thecrosslinking modification of ultrahigh molecular weightpolyethylene(UHMWPE)fibers prepared by gel-spin-ning was ca...By means of ultra-violet(UV)irradiation with photoini-tiator and multifunctional crosslinking agent,thecrosslinking modification of ultrahigh molecular weightpolyethylene(UHMWPE)fibers prepared by gel-spin-ning was carried out.Thermal properties of fiber sampleswere examined using differential scanning calorimetry(DSC),thermomechanical analysis(TMA)apparatusand a manual device.The results indicated that the opti-mal irradiation energy is 250-400 mJ/cm^2,heat-andcreep-resistant behaviors of modified fibers have beenimproved.展开更多
In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10...In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10- species surrogate based on the principle of extended corresponding states （ECS）. Isentropic acceleration of supercritical kerosene to subsonic and supersonic speeds has been analyzed numerically. It has been found that the isentropic relationships of supercritical kerosene are significantly dif- ferent from those of ideal gases, A two-stage fuel heating and delivery system is used to heat the kerosene up to a tem- perature of 820 K and pressure of 5.5 MPa with a maximum mass flow rate of 100 g/s. The characteristics of supercritical kerosene flows in a converging-diverging nozzle （Laval nozzle） have been studied experimentally. The results show that stable supersonic flows of kerosene could be established in the temperature range of 730 K-820 K and the measurements in the wall pressure agree with the numerical calculation.展开更多
Extracts are important components of fuels. Fatty-extracts with high heating value （HV） are hypothe- sized by researchers as positively related to the HV of fuels. The Soxhlet extractor is typically used to extract ...Extracts are important components of fuels. Fatty-extracts with high heating value （HV） are hypothe- sized by researchers as positively related to the HV of fuels. The Soxhlet extractor is typically used to extract fatty-extracts but it has shortcomings, including long processing time （8-10 h） and the requirement for large amounts of organic solvent. Supercritical extraction is an alternate and useful technique for extraction of natural products. However, published studies rarely discuss the relationship between extracts and HV. In this study, we assessed the supercritical extracts （SUE） of forest fuels in the Great Xing＇an Mountains. Our results indicated that the optimum conditions for extraction of SuEs were 40-60 mesh, 40-50 MPa, 45℃, 80 min and a CO2 flow rate of 1.5-2.0 dm3/min. The Soxhlet extracts contents and the SuE contents were all related to HV. However, R2 of the coniferous samples （0.8499） and needle samples （0.9722） demonstrated that the correlation between HV and the SuE content was closer. We conclude that supercritical fatty-extracts provide a useful index of the HV of fuels, especially coniferous fuels. SuE data can be used in fire management, for example to estimate the rate of fire spread or fire intensity.展开更多
Due to the low density and excellent mechanical proper-ties,high performance fiber reinforced materials have aconsiderable application in the area of high technologyand dally usage.In this paper,the Ultra-high Molecu-...Due to the low density and excellent mechanical proper-ties,high performance fiber reinforced materials have aconsiderable application in the area of high technologyand dally usage.In this paper,the Ultra-high Molecu-lar Weight Polyethylene(UHMWPE)fiber reinforcedPE tape prepared with the method of powder impregnat-ion was studied.The effect of impregnate length and thetensile force of the yarn on the fiber content as well as on the strength and modulus of the tape were discussed.Calculation shows that the strength and the modulus ofthe ULMWPE fiber can keep about 85％ after it undergothe process.展开更多
In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC ...In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.展开更多
Synthesis of a m m oniu m alu min u m carbonate hydroxide ( A A C H) w as investigated usinga m m oniu m alu min u m sulfate and a m moniu m hydro carbonate as the starting m aterials . Itw as found that A A C Hca...Synthesis of a m m oniu m alu min u m carbonate hydroxide ( A A C H) w as investigated usinga m m oniu m alu min u m sulfate and a m moniu m hydro carbonate as the starting m aterials . Itw as found that A A C Hcan be synthesized by adding a m m oniu m alu m inu m sulfate solution torapidly stirred a m moniu m hydro - carbonate solution at a tem perature of 30 ℃. A A C Hcantransfor m to α Al2 O3 co m pletely by calcining at 1100 ℃ for 1 hour , and the obtained po w ders , with a particle size of 100 n m , can be sintered to 98 99 % relative density at 1500 ℃for 2 hours .展开更多
This work explored the way to improve hot modulus q/＇ rupture （HMOR） and refractoriness under load （RUL） by adding mild-calcined coal gangue （MCG） in Al2O3 -SiO2 ultra low cement （ULC） castables, making use o...This work explored the way to improve hot modulus q/＇ rupture （HMOR） and refractoriness under load （RUL） by adding mild-calcined coal gangue （MCG） in Al2O3 -SiO2 ultra low cement （ULC） castables, making use of the in-situ effect of the MCG during heating-up. The influence of respective additions of 5%, 10% and 1.5% of the MCG powders calcined at 700℃ was investigated on HMOR at 1400 ℃ and RUL of the castables. With increased addition of the MCG, HMOR and RUL become significantly enhanced. At 10% of the MCG addition, HMOR reaches 3 MPa, as compared to 0. 3 MPa in the case of no MCG addition. RUL of the specimens dried at 110 ℃for 24 h can be increased by some 270 ℃ with 10% of the MCG addition. RUL 0.11 the specimens preheated at 1 500℃ for 3 h maintains the growth trend with the MCG addition increasing. The microstructure of the heated castable samples was investigated by means of SEM. The in-situ formed needle-like and interlaced mullite in the matrix is contributive to the tmprovement.展开更多
The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nonto...The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nontoxic and nonflammable solvents, and minimal by -product pollution. The resulting refined lanolin and its alcohol have light color and little odor, and can be used as raw materials for high grade cosmetic products.展开更多
文摘The development and technical characteristics in different stages of supercritical (ultra-Supercritical) technology abroad are introduced in this paper. At the same time, according to the development trend of supercritical (ultra-supercritical) technology, the corresponding revelations are given in this paper. That is: It is an inevitable choice to develop supercritical (ultra-supercritical) technology if we want to improve the thermal efficiency and heat efficiency.
文摘Use a 1000MW ultra-supercritical tower boiler as the research object. On the basis of one dimensional model, simplify the tube heat transfer model and the radiation heat transfer model;establish the two-dimensional area calculation model with the regional method;?summarize the heat load distribution of flue gas temperature and water wall surface;and compare with the measured data. The error range of the result is acceptable on the project. The distribution of water wall surface heat load along the furnace width and the area where heat transfer deterioration?cause easily along the furnace height direction are studied with the model and algorithm on different boiler load conditions. All these provide the reference for the design and operation of the ultra supercritical boiler.
基金National Natural Science Foundation of China(No.60974119)
文摘Ultra-supercritical(USC) unit is more and more popular in coal-fired power industry.In this paper,closed-loop identification based on subspace model identification(SMI) is introduced for superheated steam temperature system of USC unit.Closed-loop SMI is applied to building step response model of the unit directly.The parameters selection method is proposed to deal with the parameter sensitivity and improve the reliability of the model.Finally,the model is used in model identification of real USC unit.
文摘Poly(1,1,2,2- tetrahydroperfluorodecyl acrylate) (poly (TA-N)) was synthesized in laboratory. The resulting morphology of rapid expansion of supercritical solution (RESS) sprays of poly(TA - N) was investigated. At apre - expansion temperature of 45℃), amorphous polymer was formed. At temperature around 60 ℃ to 80 ℃ , fibers were formed. Increase of temperature increasesparticle size slightly. At temperature of 105℃ , most of particles are spheres. The RESS is an attractive process. To apply the polymers desired for coating applications in an organic solvent - free process that is economically viable , and it will have implications for pollution prevention during polymer film
基金oral prepared in the Second East Asian Polymer Conference held in Hongkong,China,January 12-16,1999
文摘By means of ultra-violet(UV)irradiation with photoini-tiator and multifunctional crosslinking agent,thecrosslinking modification of ultrahigh molecular weightpolyethylene(UHMWPE)fibers prepared by gel-spin-ning was carried out.Thermal properties of fiber sampleswere examined using differential scanning calorimetry(DSC),thermomechanical analysis(TMA)apparatusand a manual device.The results indicated that the opti-mal irradiation energy is 250-400 mJ/cm^2,heat-andcreep-resistant behaviors of modified fibers have beenimproved.
基金supported by the National Natural Science Foundation of China (10672169 and 10902115)
文摘In this paper, compressible flow of aviation kerosene at supercritical conditions has been studied both numerically and experimentally. The thermophysical properties of supercritical kerosene are calculated using a 10- species surrogate based on the principle of extended corresponding states （ECS）. Isentropic acceleration of supercritical kerosene to subsonic and supersonic speeds has been analyzed numerically. It has been found that the isentropic relationships of supercritical kerosene are significantly dif- ferent from those of ideal gases, A two-stage fuel heating and delivery system is used to heat the kerosene up to a tem- perature of 820 K and pressure of 5.5 MPa with a maximum mass flow rate of 100 g/s. The characteristics of supercritical kerosene flows in a converging-diverging nozzle （Laval nozzle） have been studied experimentally. The results show that stable supersonic flows of kerosene could be established in the temperature range of 730 K-820 K and the measurements in the wall pressure agree with the numerical calculation.
基金sponsored by the National Natural Science Foundation of China(Grant number:31170618)the National Key Technologies R&D Program of China(Grant number2011BAD32B05)
文摘Extracts are important components of fuels. Fatty-extracts with high heating value （HV） are hypothe- sized by researchers as positively related to the HV of fuels. The Soxhlet extractor is typically used to extract fatty-extracts but it has shortcomings, including long processing time （8-10 h） and the requirement for large amounts of organic solvent. Supercritical extraction is an alternate and useful technique for extraction of natural products. However, published studies rarely discuss the relationship between extracts and HV. In this study, we assessed the supercritical extracts （SUE） of forest fuels in the Great Xing＇an Mountains. Our results indicated that the optimum conditions for extraction of SuEs were 40-60 mesh, 40-50 MPa, 45℃, 80 min and a CO2 flow rate of 1.5-2.0 dm3/min. The Soxhlet extracts contents and the SuE contents were all related to HV. However, R2 of the coniferous samples （0.8499） and needle samples （0.9722） demonstrated that the correlation between HV and the SuE content was closer. We conclude that supercritical fatty-extracts provide a useful index of the HV of fuels, especially coniferous fuels. SuE data can be used in fire management, for example to estimate the rate of fire spread or fire intensity.
文摘Due to the low density and excellent mechanical proper-ties,high performance fiber reinforced materials have aconsiderable application in the area of high technologyand dally usage.In this paper,the Ultra-high Molecu-lar Weight Polyethylene(UHMWPE)fiber reinforcedPE tape prepared with the method of powder impregnat-ion was studied.The effect of impregnate length and thetensile force of the yarn on the fiber content as well as on the strength and modulus of the tape were discussed.Calculation shows that the strength and the modulus ofthe ULMWPE fiber can keep about 85％ after it undergothe process.
文摘In recent times, the overall interest over Supercritical Fluid Chromatography (SFC) is truly growing within various domains but especially for pharmaceutical analysis. However, in the best of our knowledge modern SFC is not yet applied for drug quality control in the daily routine framework. Among the numerous reported SFC methods, none of them could be found to fully satisfy to all steps of the analytical method lifecycle. Thereby, the present contribution aims to provide an overview of the current and past achievements related to SFC techniques, with a targeted attention to this lifecycle and its successive steps. The included discussions were therefore structured accordingly and emphasizing the analytical method lifecycle in accord with the International Conference on Harmonisation (ICH). Recent and important scientific outputs in the field of analytical SFC, as well as instrumental evolution, qualification strategies, method development methodologies and discussions on the topic of method validation are reviewed.
文摘Synthesis of a m m oniu m alu min u m carbonate hydroxide ( A A C H) w as investigated usinga m m oniu m alu min u m sulfate and a m moniu m hydro carbonate as the starting m aterials . Itw as found that A A C Hcan be synthesized by adding a m m oniu m alu m inu m sulfate solution torapidly stirred a m moniu m hydro - carbonate solution at a tem perature of 30 ℃. A A C Hcantransfor m to α Al2 O3 co m pletely by calcining at 1100 ℃ for 1 hour , and the obtained po w ders , with a particle size of 100 n m , can be sintered to 98 99 % relative density at 1500 ℃for 2 hours .
文摘This work explored the way to improve hot modulus q/＇ rupture （HMOR） and refractoriness under load （RUL） by adding mild-calcined coal gangue （MCG） in Al2O3 -SiO2 ultra low cement （ULC） castables, making use of the in-situ effect of the MCG during heating-up. The influence of respective additions of 5%, 10% and 1.5% of the MCG powders calcined at 700℃ was investigated on HMOR at 1400 ℃ and RUL of the castables. With increased addition of the MCG, HMOR and RUL become significantly enhanced. At 10% of the MCG addition, HMOR reaches 3 MPa, as compared to 0. 3 MPa in the case of no MCG addition. RUL of the specimens dried at 110 ℃for 24 h can be increased by some 270 ℃ with 10% of the MCG addition. RUL 0.11 the specimens preheated at 1 500℃ for 3 h maintains the growth trend with the MCG addition increasing. The microstructure of the heated castable samples was investigated by means of SEM. The in-situ formed needle-like and interlaced mullite in the matrix is contributive to the tmprovement.
基金Science Foundation of National Education Commission(99053)
文摘The use of supercritical fluid carbon dioxide (SFCO2) in extraction of lanolin and its alcohol is superior to the conventional solvent extraction method. Its distinctive advantages include high extractive ratio, nontoxic and nonflammable solvents, and minimal by -product pollution. The resulting refined lanolin and its alcohol have light color and little odor, and can be used as raw materials for high grade cosmetic products.
