Petroleum sulfonate is one of the most important surfactants used in surfactant flooding for enhanced oil recovery, which is mainly obtained by treating high-boiling petroleum fractions in a stirred tank reactor(STR) ...Petroleum sulfonate is one of the most important surfactants used in surfactant flooding for enhanced oil recovery, which is mainly obtained by treating high-boiling petroleum fractions in a stirred tank reactor(STR) or in a fallingfilm reactor(FFR). The synthesis of petroleum sulfonate with ultra-low interfacial tension from viscous petroleum fractions was carried out in a rotating packed bed(RPB) reactor using dilute liquid sulfur trioxide as the sulfonating agent in this study. The effects of various experimental conditions on components content and oil-water interfacial tension(IFT) were investigated. Under the optimum conditions, the active matter content could reach up to 50.3% and the IFT could be equal to 4.7×10-3 m N/m. Compared with the traditional reactor, the active matter content is by 14.12% higher in the RPB as compared to that obtained in the STR. The uneven change of the test oil droplets during the IFT measurement was also discussed. The increase of heavy components content not only can eliminate the contraction phenomenon, but also can reduce the IFT to a minimum. This can be conducive to explaining the reason for producing IFT and the preparation of proper formulations for practical application.展开更多
This study focuses on a new technology of Subsurface Tension Leg Platform （STLP）, which utilizes the shallow- water rated well completion equipment and technology for the development of large oil and gas fields in u...This study focuses on a new technology of Subsurface Tension Leg Platform （STLP）, which utilizes the shallow- water rated well completion equipment and technology for the development of large oil and gas fields in ultra-deep water （UDW）. Thus, the STLP concept offers attractive advantages over conventional field development concepts. STLP is basically a pre-installed Subsurface Sea-star Platform （SSP）, which supports rigid risers and shallow-water rated well completion equipment. The paper details the results of the parametric study on the behavior of STLP at a water depth of 3000 m. At first, a general description of the STLP configuration and working principle is introduced. Then, the numerical models for the global analysis of the STLP in waves and current are presented. After that, extensive parametric studies are carried out with regarding to SSP/tethers system analysis, global dynamic analysis and riser interference analysis. Critical points are addressed on the mooring pattern and riser arrangement under the influence of ocean current, to ensure that the requirements on SSP stability and riser interference are well satisfied. Finally, conclusions and discussions are made. The results indicate that STLP is a competitive well and riser solution in up to 3000 m water depth for offshore petroleum production.展开更多
The innovative Subsurface Tension Leg Platform(STLP), which is designed to be located below Mean Water Level(M.W.L) to minimize direct wave loading and mitigate the effect of strong surface currents, is considered as ...The innovative Subsurface Tension Leg Platform(STLP), which is designed to be located below Mean Water Level(M.W.L) to minimize direct wave loading and mitigate the effect of strong surface currents, is considered as a competitive alternative system to support shallow-water rated well completion equipment and rigid risers for large ultra-deep water oil field development. A detailed description of the design philosophy of STLP has been published in the series of papers and patents. Nonetheless, design uncertainties arise as limited understanding of various parameters effects on the structural response of STLP, pertaining to the environmental loading, structural properties and hydrodynamic characteristics. This paper focuses on providing quantitative methodology on how each parameter affects the structural response of STLP, which will facilitate establishing the unique design criteria as regards to STLP. Firstly, the entire list of dimensionless groups of input and output parameters is proposed based on VaschyBuckingham theory. Then, numerical models are built and a series of numerical tests are carried out for validating the obtained dimensionless groups. On this basis, the calculation results of a great quantity of parametric studies on the structural response of STLP are presented and discussed in detail. Further, empirical formulae for predicting STLP response are derived through nonlinear regression analysis. Finally, conclusions and discussions are made. It has been demonstrated that the study provides a methodology for better control of key parameters and lays the foundation for optimal design of STLP. The obtained conclusions also have wide ranging applicability in reference to the engineering design and design analysis aspects of deepwater buoy supporting installations, such as Grouped SLOR or TLR system.展开更多
基金supported by Project of the National Twelfth Five-Year Research Program of China (Grants. 2014BAE03B02)
文摘Petroleum sulfonate is one of the most important surfactants used in surfactant flooding for enhanced oil recovery, which is mainly obtained by treating high-boiling petroleum fractions in a stirred tank reactor(STR) or in a fallingfilm reactor(FFR). The synthesis of petroleum sulfonate with ultra-low interfacial tension from viscous petroleum fractions was carried out in a rotating packed bed(RPB) reactor using dilute liquid sulfur trioxide as the sulfonating agent in this study. The effects of various experimental conditions on components content and oil-water interfacial tension(IFT) were investigated. Under the optimum conditions, the active matter content could reach up to 50.3% and the IFT could be equal to 4.7×10-3 m N/m. Compared with the traditional reactor, the active matter content is by 14.12% higher in the RPB as compared to that obtained in the STR. The uneven change of the test oil droplets during the IFT measurement was also discussed. The increase of heavy components content not only can eliminate the contraction phenomenon, but also can reduce the IFT to a minimum. This can be conducive to explaining the reason for producing IFT and the preparation of proper formulations for practical application.
基金financially supported by the National Natural Science Foundation of China(Grant No.51709041)
文摘This study focuses on a new technology of Subsurface Tension Leg Platform （STLP）, which utilizes the shallow- water rated well completion equipment and technology for the development of large oil and gas fields in ultra-deep water （UDW）. Thus, the STLP concept offers attractive advantages over conventional field development concepts. STLP is basically a pre-installed Subsurface Sea-star Platform （SSP）, which supports rigid risers and shallow-water rated well completion equipment. The paper details the results of the parametric study on the behavior of STLP at a water depth of 3000 m. At first, a general description of the STLP configuration and working principle is introduced. Then, the numerical models for the global analysis of the STLP in waves and current are presented. After that, extensive parametric studies are carried out with regarding to SSP/tethers system analysis, global dynamic analysis and riser interference analysis. Critical points are addressed on the mooring pattern and riser arrangement under the influence of ocean current, to ensure that the requirements on SSP stability and riser interference are well satisfied. Finally, conclusions and discussions are made. The results indicate that STLP is a competitive well and riser solution in up to 3000 m water depth for offshore petroleum production.
基金financially supported by the National Natural Science Foundation of China(Grant No.51709041)China Postdoctoral Science Foundation(Grant Nos.2017M610178 and 2018T110224)the Fundamental Research Funds for the Central Universities(Grant No.DUT18RC(4)069)
文摘The innovative Subsurface Tension Leg Platform(STLP), which is designed to be located below Mean Water Level(M.W.L) to minimize direct wave loading and mitigate the effect of strong surface currents, is considered as a competitive alternative system to support shallow-water rated well completion equipment and rigid risers for large ultra-deep water oil field development. A detailed description of the design philosophy of STLP has been published in the series of papers and patents. Nonetheless, design uncertainties arise as limited understanding of various parameters effects on the structural response of STLP, pertaining to the environmental loading, structural properties and hydrodynamic characteristics. This paper focuses on providing quantitative methodology on how each parameter affects the structural response of STLP, which will facilitate establishing the unique design criteria as regards to STLP. Firstly, the entire list of dimensionless groups of input and output parameters is proposed based on VaschyBuckingham theory. Then, numerical models are built and a series of numerical tests are carried out for validating the obtained dimensionless groups. On this basis, the calculation results of a great quantity of parametric studies on the structural response of STLP are presented and discussed in detail. Further, empirical formulae for predicting STLP response are derived through nonlinear regression analysis. Finally, conclusions and discussions are made. It has been demonstrated that the study provides a methodology for better control of key parameters and lays the foundation for optimal design of STLP. The obtained conclusions also have wide ranging applicability in reference to the engineering design and design analysis aspects of deepwater buoy supporting installations, such as Grouped SLOR or TLR system.
