一种改进的数字Ultra-Wide Bandwidth Radio-on-Fiber系统模型的性能分析

为了充分利用超宽带的特点,对数字光载无线系统进行了改进,并给出了系统模型.理论分析和仿真结果表明,跳时序列构造不同,系统性能(信噪比)也不同;相同构造下,激活用户数不同引起的时隙平均干扰也不同.这种改进使得数字光载无线系统降低了复杂度,提高了光纤利用率,同时也改善了系统的性能.

Fully-integrated ultra-wide band LNA in 0.18μm CMOS technology for 3-10 GHz applications

The paper presents a fully integrated ultra-wide band(UWB)low noise amplifier(LNA)for 3-10 GHz applications.It employs self-biased resistive-feedback and current-reused technique to achieve wide input matching and low power characteristics.An improved biased architecture is adopted in the second stage to attain a better gain-compensation performance.The design is verified with TSMC standard 1 P6 M 0.18μm RF CMOS process.The measurement results show that the parasitic problem of the transistors at high frequencies is solved.A high and flat S21 of 9.7±1.5 dB and the lowest NF 3.5 dB are achieved in the desired frequency band.The power consumption is only 7.5 mA under 1.6 V supply.The proposed LNA achieves broadband flat gain,low noise,and high linearity performance simultaneously,allowing it to be used in 3-10 GHz UWB applications.

Progress of power field effect transistor based on ultra-wide bandgap Ga_2O_3 semiconductor material

As a promising ultra-wide bandgap semiconductor, gallium oxide(Ga_2O_3) has attracted increasing attention in recent years. The high theoretical breakdown electrical field(8 MV/cm), ultra-wide bandgap(～ 4.8 eV) and large Baliga's figure of merit(BFOM) of Ga_2O_3 make it a potential candidate material for next generation high-power electronics, including diode and field effect transistor(FET). In this paper, we introduce the basic physical properties of Ga_2O_3 single crystal, and review the recent research process of Ga_2O_3 based field effect transistors. Furthermore, various structures of FETs have been summarized and compared, and the potential of Ga_2O_3 is preliminary revealed. Finally, the prospect of the Ga_2O_3 based FET for power electronics application is analyzed.

Compact Coplanar Epsilon-Negative Antenna with Ultra-Wide Band Character

In this paper, a compact coplanar epsilon.negative(ENG) antenna is proposed with ultra.wide operation band and small size of 18×11.5 mm2. The proposed antenna is designed based on a coplanar.waveguide(CPW) feeding antenna, and thus the via.free structure is employed to realize the ENG unit cell, which is convenient to tune the frequency of zeroth.order resonance(ZOR) and extends the ZOR bandwidth. The high.order resonant frequencies are achieved and mainly determined by the separate slots that are located between the radiating patch and the ground plane. Adding the left.handed inductance between the radiating patch and ground has slight impact on the high.order resonant frequencies, and then the ultra.wide band is achieved by merging the ZOR bandwidth with the high.order resonant bandwidths. The ground plane primarily works as a matching network for the proposed antenna. Although it generates a low.frequency resonance, the performance is undesirable due to the impedance mismatching. The measured results show that the reflection coefficient, |S11| <.10 d B, is in a wide frequency range from 5.25 to 13 GHz, which covers the upper operation band of UWB communication. Also, the antenna contains relatively stable gains and omni.directional radiation patterns.

Design of Integrated Triple Band Notched for Ultra-Wide Band Microstrip Antenna

Ultra-wideband (UWB) is one of the recent topics that received a great concern from academia and industry. However, UWB found many difficulties to be standardized due to the overlay working that made UWB an important potential interference source to many licensed and unlicensed spectrum throughout the band 3.1 to 10.6 GHz. This paper demonstrates the design of integrated triple band notched for UWB Microstrip antenna. We simulated UWB short range systems which require low power and these are built using inexpensive digital components. We proposed a compact triple band notched CPW (Co-planar Waveguide) fed Micro strip Antenna (MSA) for UWB. This band-notched antenna has rejection characteristics at 3.2 GHz (for Wi-MAX band 3.16 to 3.32 GHz), at 5.5 GHz (for WLAN 2 band—5.3 to 5.72 GHz) and at 7.9 GHz (for ITU band 7.72 GHz to 8.13 GHz). The simulation was done using IE3D simulator.

Isolation Enhancement in a Compact Four-Element MIMO Antenna for Ultra-Wideband Applications

Mutual coupling reduction or isolation enhancement in antenna arrays is an important area of research as it severely affects the performance of an antenna.In this paper,a new type of compact and highly isolated Multiple-Input-Multiple-Output(MIMO)antenna for ultra-wideband(UWB)applications is presented.The design consists of four radiators that are orthogonally positioned and confined to a compact 40×40×0.8 mm3 space.The final antenna design uses an inverted L shape partial ground to produce an acceptable reflection coefficient(S11<−10 dB)in an entire UWB band(3.1–10.6)giga hertz(GHz).Moreover,the inter-element isolation has also been enhanced to>20 db for majority of the UWB band.The antenna was fabricated and tested with the vector network analyzer(VNA)and in an anechoic chamber for scattering parameters and radiation patterns.Furthermore,different MIMO diversity performance metrics are also measured to validate the proposed model.The simulation results and the experimental results from the constructed model agree quite well.The proposed antenna is compared with similar designs in recently published literature for various performance metrics.Because of its low envelope correlation coefficient(ECC<0.1),high diversity gain(DG>9.99 dB),peak gain of 4.6 dB,reduced channel capacity loss(CCL<0.4 b/s/Hz),and average radiation efficiency of over 85%,the proposed MIMO antenna is ideally suited for practical UWB applications.

Numerical simulation of the coupling of ultra-wide band electromagnetic pulse into landmine by aperture

The modern landmine＇s electronic fuse is susceptible to strong interference or can even be damaged by the ultra-wide band electromagnetic pulse（UWB-EMP）. The finite-difference time-domain（FDTD） method in lossy media with cylindrical coordinates is used to study the interactions of the UWB-EMP with the landmine. First, the coupling of UWB-EMP into the landmine shielding shell through an aperture is numerically simulated. Second, the coupled electromagnetic field of mine shells made of different shielding materials and with apertures of different sizes is plotted. Third, the aperture coupling laws of UWB-EMP into shells are analyzed and categorized. Such an algorithm is capable of effectively preventing ladder similar errors, and consequently improving the calculation precision, and in addition to adopting the message passing interface（MPI） parallel method to divide the total calculating range into more sub-ranges, the overall calculating efficiency is greatly increased. These calculations are surely a constructive reference for modern landmine design against electromagnetic damage.

Evaluation of traumatic retinopathy with ultra-wide field imaging under corneal scar or fixed small pupil

AIM： To evaluate the value of ultra-wide field（UWF） imaging in the management of traumatic retinopathy under the condition of corneal scar or fixed small pupil after complicated ocular trauma. METHODS： Twenty-eight patients（28 eyes） with complicated ocular trauma were enrolled in the study from June 2016 to May 2017, including 19 males and 9 females with age ranged from 11 to 64（43.42±12.62）y. All patients were treated with secondary vitrectomy after emergency operation for wound repair of open ocular trauma. Direct ophthalmoscopy and 45-degree fundus photography were taken at each time point of follow up for comparison of findings with UWF images. Routine eye examination including visual acuity, intraocular pressure, slit lamp examination were performed and analyzed as well.RESULTS： Among the 28 traumatized eyes, the positive rate for identification of traumatic retinopathed was 32.1%（9 cases）, 14.9%（5 cases）, and 85.7%（24 cases） with direct ophthalmoscopy, 45-degree fundus photography, and UWF imaging, respectively. The detective rate of UWF imaging under the condition of corneal scar or fixed small pupil was statistically greater than that of 45-degree fundus photography and direct ophthalmoscopy（Bonferroni correction, P〈0.001）. UWF image was obtained in 19 eyes with opaque corneal scar, otherwise their fundus could not be seen by conventional methods. The additional findings of traumatic retinopathies by UWF imaging included periretinal membranes or pre-retinal proliferating strip, retinal holes, hemorrhage in the vitreous or sub-retinal space.CONCLUSION： UWF imaging is superior to traditional fundus photography in the evaluation of traumatic retinopathies under the condition of corneal scar or fixed small pupil after complicated ocular trauma.

Designing a Carbon Nanotube Field-Effect Transistor with High Transition Frequency for Ultra-Wideband Application

Theoretical calculations predict transition frequencies in the terahertz range for the field-effect transistors based on carbon nanotubes, and this shows their suitability for being used in high frequency applications. In this paper, we have designed a field-effect transistor based on carbon nanotube with high transition frequency suitable for ultra-wide band applications. We did this by optimizing nanotube diameter, gate insulator thickness and dielectric constant. As a result, we achieved the transition frequency about 7.45 THz. The environment of open source software FETToy is used to simulate the device. Also a suitable model for calculating the transition frequency is presented.

Evaluation of System Performance of Ultra-Wide Band Jointing in MC Signaling in Correlated Environments

The evaluation of System Performance of UWB (ultra-wide band) jointing in MC (multi-carrier) signaling in correlated environments is presented in the report. The correlated Nakagami-m statistical distribution for the multipath fading model is assumed in this scenario. In fact to establish the model for analyzing in this article is using MC-CDMA (multi-carrier code-division multiple-access) system characterization combined with a UWB scheme. The average BER (bit error rate) is calculated and compared to a special case of previously published results. Studied results from this paper can be implied to approve the system performance for a UWB system combined with a MC-CDMA wireless communication system. It is worth noting that the Nakagami-m distributed fading parameter significantly dominates UWB system performance when it cooperates with MC signaling under a fading environment. Finally, it is worthy of noting that when the SNR (signal-to-noise ratio) at system’s receiver reaches a preset high threshold value, the parameter of power decay ratio effect could be not included.

Crustal structure of the eastern Dabie orogenic belt from the seismic tomography and wide-angle reflection studies

The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.

面向复杂环境的UWB/LiDAR/IMU组合定位方法

针对室外全球卫星导航系统(GNSS)拒止并且超宽带(UWB)和LiDAR在非视距和点云特征稀疏环境下定位效果较差的问题,提出了一种面向复杂环境的UWB/LiDAR/惯性测量单元(IMU)组合定位方法。首先,利用LiDAR和UWB的互补特性设计了时变因子,用于对车辆进行重定位;然后,引入三种运动模型描述车辆的运动状态,各模型采用无迹卡尔曼滤波方法设计滤波器;最后,将重定位后的车辆定位和IMU的测量数据作为交互式多模型-无迹卡尔曼滤波算法的状态输入,解算出最终的车辆位置。实验结果表明,所提组合定位方法具有较高的定位精度,相对于UWB和LiDAR单一传感器,视距环境下的定位精度分别提升了35.1%和22.8%,非视距环境下分别提升了53.1%和27.2%;所提重定位方法相对于UWB和LiDAR单一传感器,视距环境下的定位精度分别提升了23.2%和8.7%,非视距环境下分别提升了42.9%和11.4%,体现出了较高的定位精度和对复杂环境的适应能力。

类星型手性超材料超宽带隙特性研究

振动和噪声的抑制一直是工程中的重要问题,而超材料在实现减振降噪方面具有良好的应用价值。基于传统空心星型超材料,添加手性结构特性,设计一种新型的空心类星型手性超材料,并在其基础上进一步演化出实心类星型手性超材料。通过振动模态分析带隙产生机理和不同结构参数对带隙的影响,通过频散曲面、波传播方向、群速度和相速度等研究弹性波在结构中的传播特性,并研究有限周期结构的传输特性。结果表明:实心类星型手性超材料可以产生宽度为5116 Hz的超宽带隙,带隙形成主要是由于凹角星和韧带的旋转振动耗散了弹性波能量,内凹角α的减小以及韧带与水平方向的夹角θ的增大使得最宽带隙的宽度增大;有限周期结构在其带隙范围内可以产生明显的位移幅值衰减,该新型超材料具有良好的隔振性能。

基于单级多电平开关变流的超大容量海上风电变流器

海上风机正向超大容量方向发展,基于较低电平数目变流技术的风电变流器在电压、容量等级的提升方面受到限制。提出了基于单级多电平开关变流的超大容量海上风电变流器方案,采用直流电压可大范围调节的宽直流电压模块化多电平变流器(MMC),在单级多电平变流器中实现DC/DC和DC/AC两级变换功能。基于风电变流器的单向功率传输特性,采用单向电流型宽直流电压MMC优化开关器件用量,并基于负电平利用优化调制比大幅降低MMC的子模块电容用量。所提出的方案不仅具有电压与容量等级高、功率损耗低、谐波含量低的优势,还能最大限度降低开关器件和电容的用量。与现有风电变流器方案进行对比,结果表明所提方案在经济性、运行性能等方面具有显著优势。通过仿真验证了所提方案拓扑结构和控制策略的可行性和有效性。

宽阻带多陷波超宽带滤波器

为抑制其他无线窄带通信系统对超宽带系统的干扰,并提高超宽带滤波器的阻带抑制特性,提出一种拥有宽阻带和三陷波的超宽带滤波器。该滤波器采用传统多模谐振器加载阶梯开路谐振器与扇形谐振器的结构实现超宽带特性,其阻带宽度达到24.3 GHz;为引入三陷波,该滤波器采用了加载开路谐振器、耦合L型短路短截线以及非对称耦合结构;通过并联开路谐振器加载扇形谐振器的结构,优化了通带插入损耗。经过电磁仿真,该滤波器通带范围为4.1~10.6 GHz,相对带宽为93.4%,插入损耗小于1.3 dB,三处陷波分别位于5.1、6.28、8.1 GHz处,且陷波深度均大于25 dB,保证了超宽带系统的通信质量。

基于MOEA/D算法的三陷波超宽带天线设计

为实现超宽带通信中对WIMAX(3.3~3.7 GHz)、WLAN(5.150~5.825 GHz)和ITU(8.01~8.50 GHz)频段干扰的抑制,提出了一种基于MOEA/D算法优化设计的具有三陷波特性的超宽带天线。天线采用T形结构作为辐射贴片,通过改变贴片形状等方法实现在3~12 GHz的超宽带。在辐射贴片上刻蚀两个U形缝隙和在传输线两侧加载C形开口环,对天线进行陷波设计。利用MOEA/D算法对陷波结构的结构参数和加载位置进行优化,实现了在3.31~3.69 GHz、5.25~6.13 GHz和8.01~8.51 GHz频段的陷波效果,成功抑制了频段干扰。与传统扫频优化的设计方法相比,采用MOEA/D算法设计的天线在陷波频带内增益低至-19 dB,各陷波频带准确度误差均在3.6%以下,提高了天线的设计效率,具有一定的工程应用价值。

Daytona超广角激光扫描眼底成像与FFA在老年白内障病人糖尿病性视网膜病变筛查中的一致性分析

目的探讨Daytona超广角激光扫描眼底成像与荧光素眼底血管造影(fundus fluorescein angiography,FFA)筛查老年白内障病人糖尿病性视网膜病变(diabetic retinopathy,DR)的一致性。方法采用横断面研究方法,选取2021年4月至2023年8月在大庆油田总医院眼科门诊就诊的年龄≥60岁合并糖尿病的老年白内障病人172例(323眼),所有病人均接受Daytona超广角激光扫描眼底成像以及FFA检查,分别记录2种检查方法诊断DR以及DR分期情况。采用卡方检验、加权Kappa一致性检验、Spearman偏回归分析对2种检查结果的相关性进行分析。结果2种检查方法的可阅片率差异无统计学意义(93.8%比94.1%,P=0.869)。Daytona超广角系统检查时间较FFA检查时间明显缩短(Z=16.85,P<0.001)。排除未得到眼底图像25眼,最终153例298眼纳入一致性研究。Daytona超广角系统与FFA检测DR分期完全一致278只眼(93.29%),Kappa值为0.925,95%CI:0.892~0.958。以FFA为金标准,Daytona超广角系统检测增生型DR的敏感度和特异度分别为90.00%、100.00%,Kappa值为0.926;检测非增生型DR的敏感度、特异度分别为94.47%、90.91%,Kappa值为0.900。Daytona超广角系统与FFA检测DR分期结果呈高度正相关(r=0.921)。结论Daytona超广角激光扫描眼底成像对合并糖尿病的老年白内障病人DR筛查效果及分期与FFA有很好的一致性。

基于MSCAU-Net的视网膜眼底图像的硬渗出液分割

硬渗出液是早期糖尿病性视网膜病变(diabetic retinopathy,DR)的主要病症之一,在眼底图像中占据的像素点较少,其检测容易受视盘、软渗出液的干扰。针对这些问题,在U型网络(U-Net)结构的基础上,通过在编码器和解码器中融入残差模块和残差通道注意力模块学习硬渗出液的细微特征,在跳跃连接中加入一种新的多尺度通道注意力(multi-scale channel attention,MSCA)模块提升网络对稀疏小病灶的分割能力,提出了MSCA U-Net。基于超广角眼底图像数据集和印度糖尿病性视网膜病变图像数据集的实验结果表明,与其他基于卷积神经网络的图像分割方法相比,所提方法具有更高的硬渗出液分割精度。

第四代半导体浅析

与前三代半导体相比,第四代半导体不仅在材料种类上实现突破,更在性能上实现质的飞跃,在诸多领域展现出巨大的应用潜力。文章概述了第四代半导体的定义、分类、核心优势、应用领域与前景,并指出其面临的挑战。

基于改进全质心-Taylor的UWB定位方法

针对非视距(NLOS)、多径效应等因素对超宽带(UWB)定位精度的影响,提出了一种基于改进全质心结合Taylor的UWB协同定位算法。立足于3个及以上数量的定位基站,将所有基站每3个分为一组,通过双边双向法解算各组的测距数据并基于全质心算法计算相应的全质心坐标值,然后通过模拟退火算法对“伪质心”点坐标进行优化。将优化结果作为第1个初值进行Taylor展开迭代求解,得到第2个初值;进一步地,将第2个初值作为量测值,结合粒子滤波进行优化,得到载体运动时每一点的精确定位坐标。仿真和实验结果表明,与传统结合Taylor展开方法的Chan-Taylor和加权最小二乘-Taylor的UWB定位算法相比,所提算法在静态和动态定位场景下定位精度均有明显优势,经粒子滤波后可有效提高复杂场景下的定位精度,体现出了较高的鲁棒性。