Experimental study of the influencing factors and mechanisms of the pressure-reduction and augmented injection effect by nanoparticles in ultra-low permeability reservoirs

Nanoparticles(NPs)have gained significant attention as a functional material due to their ability to effectively enhance pressure reduction in injection processes in ultra-low permeability reservoirs.NPs are typically studied in controlled laboratory conditions,and their behavior in real-world,complex environments such as ultra-low permeability reservoirs,is not well understood due to the limited scope of their applications.This study investigates the efficacy and underlying mechanisms of NPs in decreasing injection pressure under various injection conditions(25—85℃,10—25 MPa).The results reveal that under optimal injection conditions,NPs effectively reduce injection pressure by a maximum of 22.77%in core experiment.The pressure reduction rate is found to be positively correlated with oil saturation and permeability,and negatively correlated with temperature and salinity.Furthermore,particle image velocimetry(PIV)experiments(25℃,atmospheric pressure)indicate that the pressure reduction is achieved by NPs through the reduction of wall shear resistance and wettability change.This work has important implications for the design of water injection strategies in ultra-low permeability reservoirs.

Optimization of Gas-Flooding Fracturing Development in Ultra-Low Permeability Reservoirs

Ultra-low permeability reservoirs are characterized by small pore throats and poor physical properties, which areat the root of well-known problems related to injection and production. In this study, a gas injection floodingapproach is analyzed in the framework of numerical simulations. In particular, the sequence and timing of fracturechanneling and the related impact on production are considered for horizontal wells with different fracturemorphologies. Useful data and information are provided about the regulation of gas channeling and possible strategiesto delay gas channeling and optimize the gas injection volume and fracture parameters. It is shown that inorder to mitigate gas channeling and ensure high production, fracture length on the sides can be controlled andlonger fractures can be created in the middle by which full gas flooding is obtained at the fracture location in themiddle of the horizontal well. A Differential Evolution (DE) algorithm is provided by which the gas injectionvolume and the fracture parameters of gas injection flooding can be optimized. It is shown that an improvedoil recovery factor as high as 6% can be obtained.

Properties of Ultra-low Thermal Expansion LAS Transparent Glass-ceramics Prepared by Spodumene

The glass-ceramics were prepared with the spodumene mineral as the main raw material,and the effects of ZrO_(2)replacing TiO_(2)on the samples were systematically investigated.The results show that the substitution of ZrO_(2)for TiO_(2)is not conductive to precipitate𝛽β-quartz solid solution phase,but can improve the transparency and flexural strength of glass-ceramics.And the glass-ceramic with the highest visible light transmittance(87%)and flexural strength(231.80 MPa)exhibits an ultra-low thermal expansion of-0.028×10^(-7)K^(-1)in the region of 30-700℃.

Effect of Ultra-low Temperature on Carbonation Performance of SFRRC and Prediction Model

Through the rapid carbonation test of SFRRC with different fiber volume fractions at ultralow temperature,the influence of ultra-low temperature damage on the carbonation resistance of SFRRC was analyzed,which provides a theoretical basis for the application of SFRRC in ultra-low temperature engineering.The experimental results show that ultra-low temperatures can significantly weaken the carbonization resistance of SFRRC.When the temperature reaches 160℃,the carbonization depth increases by 67.66%compared with the normal state.The proper amount of steel fiber has an evident influence on the carbonation resistance of the material.However,when the addition amount exceeds the optimum content,the carbonation resistance of the material decreases.The grey prediction model established by constructing the original sequence can reasonably predict the carbonation resistance of SFRRC after ultra-low temperatures.

Active straining engineering on self-assembled stacked Ni-based hybrid electrode for ultra-low overpotential

Generating sufficient strains on metal surfaces are highly challenging owing to that most metals can deform plastically to relax the strains on the surfaces.In this work,we developed a facile but highly efficient stacked deposition strategy to in situ activation and reconstruction of NiO/NiOOH on Ni matrix,following with the migration of Fe ions to NiOOH.The Fe sites on the Ni/NiO/NiOOH facilitate the formation of the stable*OH oxygenated intermediates,and the Ni matrix in the catalyst provides the catalyst excellent stability.The oxygen evolution reaction(OER)performance of the stacked NiFe-5 with compressive strain displays the strengthened binding to oxygenated intermediates and superior OER activity,the ultralow overpotentials of 162 versus reversible hydrogen electrode at 10 mA cm^(-2).On the other hand,the Ni-5 without the incorporation of Fe has shown an outstanding hydrogen evolution reaction(HER)activity,affording an overpotential of 47 mV at 10 mA cm^(-2).The NiFe-5‖Ni-5 enables the overall water splitting at a voltage of 1.508 V to achieve 20 mA cm^(-2) with remarkable durability.The stacked deposition strategy improves binding strength of Ni-based catalysts to oxygenated intermediates via generating compressive strain,causing high catalytic activities on OER and HER.

砂土地基中钻进比对螺旋桩安装性能和抗拔承载性能的影响

螺旋桩在输电线路杆塔和光伏支架等工程基础中获得了推广应用,然而沉桩速率对螺旋桩沉桩效应和承载力特性的影响机制尚不明确。通过开展砂土地基中螺旋桩沉桩与抗拔承载性能模型试验,分析了螺旋桩钻进比与扭矩、下压力之间的关系,建立了考虑承载力-扭矩-下压力相互影响的极限抗拔承载性能相关系数K'_(t)的计算方法。与既有文献试验结果及理论计算方法进行了对比分析,验证了所建立的计算方法的可靠性。研究结果表明:钻进比与螺旋桩的沉桩扭矩和下压力呈线性关系,钻进比对沉桩扭矩的影响幅度大于下压力;降低沉桩过程中钻进比可有效提高螺旋桩的抗拔承载力,钻进比为0.6工况下的抗拔极限承载力可达到钻进比为2工况下的2.9倍;所建立的砂土地基螺旋桩抗拔极限承载力-扭矩-下压力相关系数计算方法,计算误差小于30%,具有较好的准确性和适用性。

Effects of Low Temperature and Ultra-low Temperature on Pollen Viability of Tomato(Lycopersicon esculentum Mill.)

The pollen of two tomato varieties, Ryau961721 and Ryau9327D, was adopted in our research. The two tomato varieties were bred by College of Land- scape and Horticulture, Yunnan Agricultural University. The collected pollen was stored in low-temperature （4 ℃） and ultra-low-temperature （-196 ℃） circumstances. Then it was inoculated to the medium and cultured at 28 ℃ in thermostat incubator. The pollen viability was determined by electron microscope. The results showed that compared to that of pollen stored in control （25 ℃） circumstance, the viability of pollen stored in low-temperature （4 ℃） and ultra-low-temperature （-196 ℃） circum- stances for 1 -3 d did not change significantly. In addition, pollen viability trended to decrease with the increase of freeze-thaw cycle and storage time. The pollen lost basically the viability by the 7th d in the storage.

Critical analysis of the ULF power depression as a possible Tohoku earthquake precursor

Among electromagnetic methods of short-term earthquake prediction,an approach is being actively developed based on the phenomenon of magnetic ultra-low-frequency(ULF)power depression occurring a few days before an earthquake.In particular,a nighttime geomagnetic power depression in the band 0.03-0.05 Hz was observed approximately 5 days before the catastrophic Tohoku 2011 earthquake.To verify the reliability of this method,we performed an extended analysis using data from magnetometer arrays JMA,MAGDAS,PWING,and INTERMAGNET.The selected stations included sites close to the epicenter(<300 km)and remote points(~10000 km).The band-integrated spectral power of nighttime magnetic noise decreased significantly from March 6-9,several days before the earthquake.However,such variations occur simultaneously not only at nearby stations but also at distant stations.During this event,the ULF power depression was caused by low global geomagnetic activity,as evidenced by the planetary index SME.Thus,the depression of geomagnetic ULF noise cannot be considered a reliable short-term precursor.

Research and test of the measurement sensing device for the downforce of no-till planter row unit gauge wheels

To effectively obtain the downforce of the gauge wheels in real time,mechanical models of the interaction among the ground,gauge wheels,gauge wheel arms,and depth adjustment lever were constructed.A measuring method was proposed for monitoring the downforce through a two-dimensional radial sensing device,and a corresponding prototype was designed.Through simulation analysis of the sensing device with ANSYS,a 45°angle was determined to exist between the strain gauge axis and the sensing device axis,and the Wheatstone bridging circuit of R1+R3−R5−R7(R stands for resistance strain gauge,different figures represent the strain gauge number)and R2+R4−R6−R8 was adopted.According to performance and calibration tests for the sensing device,the maximum interaction effect between the X and Y axes was 2.52%,and the output signal was stable and consistent.The standard error of the slope of the fitting equation of the downforce calculation model is 0.008.According to the field test,the average downforce of the gauge wheels was 1148,1017,843,and 713 N,at different sowing speeds of 6,8,10,and 12 km/h,respectively.The coefficients of variation were 0.40,0.41,0.62,and 0.71,respectively.The results indicate that the downforce fluctuation of the gauge wheels became more severe with increasing planting speed.Both the strain simulation analysis and field test verified that the measurement method is accurate and reliable,the performance of the sensing device is stable,the measurement method and sensing device meet the application requirements and lay a foundation for the research of accurate and stable control of downforce of no-till planter.

Clinical outcome of intersphincteric resection for ultra-low rectal cancer

AIM： To analyze oncological outcome of intersphincteric resection （ISR） in ultra-low rectal cancer with intent to spare colostoma. METHODS： From 1995 to 1998, patients with a nonfixed rectal adenocarcinoma （tumor stage T2） preserving the lower margin at 1-3 cm above the dentate line without distant metastasis was enrolled （period I）. ISR was practiced in eight patients, and their postoperative followup was at least 5 years. In addition, from 1999 to 2003, another 10 patients having the same tumor location as period Ⅰ underwent ISR （period Ⅱ）. Among those, 6 patients with T3-4-staged tumor received preoperative chemoradiotherapy. RESULTS： All patients received ISR with curative intention and no postoperative mortality. In these case series at period Ⅰ, local recurrence rate was 12.5% and metastasis rate 25.0%; the S-year survival rate was 87.5% and disease-free survival rate 75.0%. There was no local recurrence or distant metastases in 10 patients with a median follow-up of 30 （range, 18-47） mo at period Ⅱ. CONCLUSION： As to ultra-low rectal cancer, intersphincteric resection could provide acceptable local control and cancerrelated survival with no permanent stoma in early-staged tumor （tumor stage T2）; more- over, preoperative concurrent chemoradiotheraw would make ISR feasible with surgical curative intent in more advanced tumors （tumor stages T3-4）.

Novel mechanism for the modification of Al_2O_3-based inclusions in ultra-low carbon Al-killed steel considering the effects of magnesium and calcium

Many researchers have explored the inclusion modification mechanism to improve non-metallic inclusion modifications in steelmaking. In this study, two types of industrial trials on inclusion modifications in liquid steel were conducted using ultra-low-carbon Al-killed steel with different Mg and Ca contents to verify the effects of Ca and Mg contents on the modification mechanism of Al_2O_3-based inclusions during secondary refining. The results showed that Al_2O_3-based inclusions can be modified into liquid calcium aluminate or a multi-component inclusion with the addition of a suitable amount of Ca. In addition, [Mg] in liquid steel can further reduce CaO in liquid calcium aluminate to drive its evolution into CaO–MgO–Al_2O_3 multi-component inclusions. Thermodynamic analysis confirmed that the reaction between [Mg] and CaO in liquid calcium aluminate occurs when the MgO content of liquid calcium aluminate is less than 3 wt% and the temperature is higher than 1843 K.

Profile improvement during CO_2 flooding in ultra-low permeability reservoirs

Gas flooding such as CO2 flooding may be effectively applied to ultra-low permeability reservoirs, but gas channeling is inevitable due to low viscosity and high mobility of gas and formation heterogeneity. In order to mitigate or prevent gas channeling, ethylenediamine is chosen for permeability profile control. The reaction mechanism of ethylenediamine with CO2, injection performance, swept volume, and enhanced oil recovery were systematically evaluated. The reaction product of ethylenediamine and CO2 was a white solid or a light yellow viscous liquid, which would mitigate or prevent gas channeling. Also, ethylenediamine could be easily injected into ultra-low permeability cores at high temperature with protective ethanol slugs. The core was swept by injection of 0.3 PV ethylenediamine. Oil displacement tests performed on heterogeneous models with closed fractures, oil recovery was significantly enhanced with injection of ethylenediamine. Experimental results showed that using ethylenediamine to plug high permeability layers would provide a new research idea for the gas injection in fractured, heterogeneous and ultra-low permeability reservoirs. This technology has the potential to be widely applied in oilfields.

Experimental Research on Refining Slag Systems Containing BaO for Ultra-Low Sulphur Steel

The experimental research on refining slag systems for ultra-low sulphur steel was carried out in a 10 kg induction furnace.It was proved that sulphur element in molten steel can be removed to less than 5×10^(-6) by adding CaO-Al_2O_3-SiO_2-MgO-CaF_2 slag on the surface of molten steel and feeding CaO-BaO-CaF2 wire into molten steel.And L_s,which is the coefficient of sulphur between slag and molten steel,that is ω(s)/ω[s],increases by increasing I(I = ωBaO/ωCaO).When I=5/3,L_s can be up to its maximum of 633.The CaSi is effective for deep desulphurization,especially when it is added to the slag of wire feeding.

The tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy: A case study in the Wangyao Oilfield of Ordos Basin, China

Due to inherent limits of data acquisition and geophysical data resolution, there are large uncertainties in the characterization of subsurface fractures. However, outcrop analogies can provide qualitative and quantitative information on a large number of fractures, based on which the accuracy of subsurface fracture characterization can be improved. Here we take the tectonic fracture modeling of an ultra-low permeability sandstone reservoir based on an outcrop analogy, a case study of the Chang6t~ Formation of the Upper Triassic Yanchang Group of the Wangyao Oilfield in the Ordos Basin of China. An outcrop at the edge of the basin is a suitable analog for the reservoir, but the prerequisite is that they must have equivalent previous stress fields, similar final structural characteristics, relative timing and an identical depositional environment and diagenesis. The relationship among fracture density, rock type and bed thickness based on the outcrop is one of the most important fracture distribution models, and can be used to interpret fracture density in individual wells quantitatively. Fracture orientation, dip, geometry and scale, also should be described and measured in the outcrop, and can be used together with structure restoration and single well fracture density interpretation to guide fracture intensity prediction on bed surfaces and to constrain the construction of the 3D fracture geometry model of the subsurface reservoir. The application of the above principles shows the outcrop-based tectonic fracture models of the target ultra-low permeability sandstone reservoir are consistent with fractures inferred from microseismic interpretation and tracer tests. This illustrated that the fracture modeling based on the outcrop analogy is reliable and can reduce the uncertainty in stochastic fracture modeling.

Innovation for forming aluminum alloy thin shells at ultra-low temperature by the dual enhancement effect

Integral thin shells made of high strength aluminum alloys are urgently needed in new generation transportation equipment. There are challenges to overcoming the co-existing problems of wrinkling and splitting by the cold forming and hot forming processes. An innovative technology of ultra-low temperature forming has been invented for aluminum alloy thin shells by the new phenomenon of ‘dual enhancement effect’. That means plasticity and hardening are enhanced simultaneously at ultra-low temperatures. In this perspective, the dual enhancement effect is described, and the development, current state and prospects of this new forming method are introduced. This innovative method can provide a new approach for integral aluminum alloy components with large size, ultra-thin thickness, and high strength. An integral tank dome of rocket with 2 m in diameter was formed by using a blank sheet with the same thickness as the final component, breaking through the limit value of thickness-diameter ratio.

Anisotropic Rock Poroelasticity Evolution in Ultra-low Permeability Sandstones under Pore Pressure,Confining Pressure,and Temperature:Experiments with Biot's Coefficient

This study aimed to show anisotropic poroelasticity evolution in ultra-low permeability reservoirs under pore pressure,confining pressure,and temperature.Several groups of experiments examining Biot's coefficient under different conditions were carried out.Results showed that Biot's coefficient decreased with increased pore pressure,and the variation trend is linear,but the decreasing rate is variable between materials.Biot's coefficient increased with increased confining pressure;the variation trend is linear,but the increasing rate varies by material as well.Generally,Biot's coefficient remains stable with increased temperature.Lithology,clay mineral content,particle arrangement,and pore arrangement showed impacts on Biot's coefficient.For strong hydrophilic clay minerals,expansion in water could result in a strong surface adsorption reaction,which could result in an increased fluid bulk modulus and higher Biot's coefficient.For skeleton minerals with strong lipophilicity,such as quartz and feldspar,increased oil saturation will also result in an adsorption reaction,leading to increased fluid bulk modulus and a higher Biot's coefficient.The study's conclusions provide evidence of poroelasticity evolution of ultra-low permeability and help the enhancing oil recovery(EOR)process.

Structure Character of M-A Constituent in CGHAZ of New Ultra-Low Carbon Bainitic Steel under Laser Welding Conditions

800 MPa grade new ultra-low carbon bainitic （NULCB） steel is the recently developed new generation steel. The microstructure in the coarse-grained heat affected zone （CGHAZ） of NULCB steel under laser welding conditions was investigated by thermal simulation. The influence of the cooling time from 800℃ to 500℃.t8/5 （0.3-30 s）, on the microstructure of the CGHAZ was discussed. The experimental results indicate that the microstructnre of the CGHAZ is only the granular bainite which consists of bainitic ferrite （BF） lath and M-A constituent while t8/5 is 0.3-30 s. The M-A constituent consists of twinned martensite and residual austenite, and the change of the volume fraction of the residual austenite in the M-A constituent is very small when t8/5 is between 0.3 and 30 s. The morphology of the M-A constituent obviously changes with the variation of t8/5.As t8/5 increases, tile average width, gross and shape parameter of the M-A constituent increase, while the line density of the M-A constituent decreases.

Performance improvement of ultra-low Pt proton exchange membrane fuel cell by catalyst layer structure optimization

Reducing the loading of noble Pt-based catalyst is vital for the commercialization of proton exchange membrane fuel cell(PEMFC),However,severe mass transfer polarization loss resulting in fuel cell performance decline will be encountered in ultra-low Pt PEMFC.In this work,mild oxidized multiwalled carbon nanotubes(mMWCNT)were adopted to construct the catalyst layer,and by varying the loading of carbon nanotubes,the catalyst layer structure was optimized.A high peak power density of 1.23 W·cm^(-2) for the MEA with mMWCNT was obtained at an ultra-low loading of 120μg·cm^(-2) Pt/PtRu(both cathode and anode),which was 44.7%higher than that of MEA without mMWCNT.Better catalyst dispersion,low charge transfer resistance,more porous structure and high hydrophobicity of catalyst layer were ascribed for the reasons of the performance improvement.

On the Development of an Effective Pressure Driving System for Ultra-Low Permeability Reservoirs

Given its relevance to the exploitation of ultra-low permeability reservoirs,which account for a substantial proportion of the world’s exploited and still unexploited reserves,in the present study the development of an adequate water injection system is considered.Due to the poor properties and weak seepage capacity of these reservoirs,the water injection pressure typically increases continuously during water flooding.In this research,the impact on such a process of factors as permeability,row spacing,and pressure gradient is evaluated experimentally using a high-pressure large-scale outcrop model.On this basis,a comprehensive evaluation coefficient is introduced able to account for the effective driving pressure.

Simultaneous hydraulic fracturing of ultra-low permeability sandstone reservoirs in China: Mechanism and its field test

Based on the impact of the stress perturbation effect created by simultaneous propagation of multiple fractures in the process of simultaneous hydraulic fracturing, a thorough research on the mechanism and adaptation of simultaneous fracturing of double horizontal wells in ultra-low permeability sandstone reservoirs was conducted by taking two adjacent horizontal wells(well Yangping-1 and well Yangping-2 located in Longdong area of China Changqing Oilfield) as field test wells. And simultaneous fracturing optimal design of two adjacent horizontal wells was finished and employed in field test. Micro-seismic monitoring analysis of fracture propagation during the stimulation treatment shows that hydraulic fractures present a pattern of complicated network expansion, and the well test data after fracturing show that the daily production of well Yangping-1 and well Yangping-2 reach105.8 t/d and 87.6 t/d, which are approximately 9.4 times and 7.8 times the daily production of a fractured vertical well in the same area, respectively. Field test reflects that simultaneous hydraulic fracturing of two adjacent horizontal wells can enlarge the expansion area of hydraulic fractures to obtain a lager drainage area and realize the full stimulation of ultra-low permeability sandstone reservoirs in China Changqing oilfield. Therefore, simultaneous fracturing of two adjacent horizontal wells provides a good opportunity in stimulation techniques for the efficient development of ultra-low permeability reservoirs in China Changqing oilfield,and it has great popularization value and can provide a new avenue for the application of stimulation techniques in ultra-low permeability reservoirs in China.