Design of Ultra-Low Loss Highly Nonlinear Dispersion Flattened Octagonal Photonic Crystal Fibers

In this study, Octagonal Photonic Crystal Fiber (O-PCF) structures are designed for different air filling fractions with fixed pitch length of 2.2 μm. The light propagating characteristics of PCF structures such as effective refractive index, confinement loss, chromatic dispersion mode effective area and nonlinear coefficient are numerically analyzed. The simulation results show that the fibers have dispersion flattened, ultra-low loss highly nonlinear nature in the wavelength region 1.3 μm to 1.7 μm.

Effects of dietary fiber content and different fiber-rich ingredients on endogenous loss of fat and fatty acids in growing pigs

Background: Determination of the endogenous loss of fat(ELF) is used to adjust for the estimation of true total tract digestibility(TTTD) of fat in diets and ingredients.Any factor which affected ELF may further affect the digestibility of fat,including sources and concentrations of fat and fiber in the diet.There are some reports of determining the ELF using regression methods based on different levels of fat intake,while reports on effects of dietary fiber content and different fiber-rich ingredients in pig diets on ELF are very limited.Therefore,the objective of this study was to determine the effects of dietary fiber content and different fiber-rich ingredients on endogenous losses of fat and fatty acids at the end of ileum and throughout the entire intestinal tract in growing pigs.Methods: In Exp.1,the effect of fiber content on endogenous loss of fat was determined using six growing pigs(Duroc × Landrace × Yorkshire;27.6 ± 2.4 kg),fitted with a T-cannula at the end of ileum.The experimental design was a 6 × 6 complete Latin square design with six periods of feeding and six diets.The six experimental fat-free diets were formulated to include graded levels of neutral detergent fiber(NDF)(0,40,80,120,160 and 200 g/kg) and soybean hull(SH) was the only fiber source,providing 0,75,150,225,300 and 375 g/kg,respectively.Chromic oxide was included at4 g/kg in all diets as an indigestible marker.In Exp.2,six crossbred growing barrows(27.6 ± 1.6 kg) were used and the experimental design was the same as for Exp.1.The six fat-free diets were formulated to include six common fiber-rich ingredients and the concentration of NDF was 100 g/kg.The six fiber-rich ingredients were defatted rice bran(DRB),sugar beet pulp(SBP),rice hull(RH),corn germ meal(CGM),SH and wheat bran(WB) and they were fed at represented250,270,145,250,170 and 280 g/kg in the diet,respectively.Results: In Exp.1,the endogenous loss of fatty acids profile did not change as dietary NDF increased in growing pigs.The endogenous losses of fat,C16:0,C18:0,C18:1,C18:2,total unsaturated fatty acids(UFA) and total saturated fatty acids(SFA) in growing pigs at the end of ileum and throughout the entire intestinal tract increased linearly as NDF content of diets increased.The endogenous losses of fat,as well as C16:0 and C18:0 throughout the entire intestinal tract also increased quadratically as NDF content of diets increased.The ELF increased from 0.71 to 3.14 g/kg of dry matter intake(DMI) and 0.56 to 8.21 g/kg DMI at the end of ileum and throughout the entire intestinal tract in growing pigs,respectively.The ELF occurred in the hindgut except for the growing pigs fed 0 and 4% NDF in their diets.The endogenous losses of C16:0 and UFA occurred primarily in the upper regions of the gut and the greatest endogenous losses of C18:0 occurred in the hindgut.The endogenous losses of fat,individual SFA and total SFA throughout the entire intestinal tract were much greater than that at the end of ileum.However,the endogenous losses of individual UFA and total UFA were less throughout the intestinal tract than at the end of ileum.In Exp.2,the endogenous losses of fat at the end of ileum were greater in growing pigs fed CGM or WB diets.The endogenous loss of fatty acids profile changed to a slight degree at the end of ileum that the endogenous loss of UFA(particularly C18:1 and C18:2) in growing pigs fed CGM or WB diets were greater(P < 0.01) than that for the other four diets.The greatest(P < 0.01) endogenous loss of SFA(particularly C18:0) was in growing pigs fed the RH diet.The endogenous losses of fat,C16:0,C18:0 and SFA over the entire intestinal tract were much greater in growing pigs fed CGM or WB diets,whereas the lowest values were in growing pigs fed DRB diet.The ELF at the end of ileum in growing pigs fed CGM or WB diets were 3.50 or 4.17 g/kg DMI,respectively,and the ELF over the entire intestinal tract was 7.23 or 7.38 g/kg DMI.The contribution in percentage of ELF in the upper gut was greater than that in the hindgut of growing pigs fed DRB and RH diets,while the ELF in the upper gut and hindgut were equal in growing pigs fed SBP,CGM and WB diets.On the whole,the endogenous losses of C18:1 and C18:2 throughout the entire intestinal tract in growing pigs fed the six fiber-rich ingredients diets were less than losses at the end of ileum,whereas the endogenous loss of fat,C16:0,C18:0 and SFA were greater throughout the intestinal tract than at the end of ileum.Conclusion: The profile of loss in endogenous fatty acids did not change as dietary NDF increased in growing pigs and the endogenous losses of fatty acids(C16:0,C18:0,C18:1 and C18:2) fat,UFA and SFA increased linearly as NDF content increased in the diets of pigs.The endogenous losses of fat or fatty acids at the end of ileum were greater in growing pigs fed RH,CGM or WB diets.The endogenous losses of fat,fatty acids(C16:0 and C18:0) and SFA were greater over the entire intestinal tract in pigs fed CGM or WB diet,while these values were the lowest in growing pigs fed the DRB diet.The contribution in percentage losses of fat in the upper gut were greater than in the hindgut of growing pigs fed DRB and RH diets,while the contribution of losses of fat in the upper gut and hindgut were equal in growing pigs fed SBP,CGM and WB diets.In addition,the endogenous loss of individual or total UFA was less over the entire intestinal tract of growing pigs fed fiber diets than that at the end of ileum,and the greatest endogenous losses of fat,individual or total SFA were over the entire intestinal tract.Therefore,differences in fiber content and the nature of fiber-rich ingredients in diets of pigs have different effects to the endogenous losses of fat or fatty acids.Considering the requirement of fat or fatty acids of pigs,careful attention must be paid that the endogenous losses of fat and fatty acids when fiber ingredients are used in diets of pigs.

Flexible Optical Waveguide Bent Loss Attenuation Effects Analysis and Modeling Application to an Intrinsic Optical Fiber Temperature Sensor

The temperature dependence of the bending loss light energy in multimode optical fibers is reported and analyzed. The work described in this paper aims to extend an initial previous analysis concerning planar optical waveguides, light energy loss, to circular optical waveguides. The paper also presents à novel intrinsic fiber optic sensing device base on this study allowing to measure temperatures parameters. The simulation results are validated theoretically in the case of silica/silicone optical fiber. A comparison is done between results obtained with an optical fiber and the results obtained from the previous curved optical planar waveguide study. It is showed that the bending losses and the temperature measurement range depend on the curvature radius of an optical fiber or waveguide and the kind of the optical waveguide on which the sensing process is implemented.

Influences of polishing on return loss of optical fiber connectors

With Al2O3 and SiO2 as polishing medium, under different polishing conditions, e.g. with different polishing pressure, polishing time and polishing fluid, the influences of polishing treatment on the return loss of optical fiber connectors were investigated. The return loss of optical fiber connectors is 32CD*238dB before polishing. The results show that dry polishing（i.e. no polishing fluid） with Al2O3 has less influence on return loss of optical fiber connectors, while dry polishing with SiO2 reduces return loss to about 20dB because of the end-face of optical fiber contaminated. The wet polishing（i.e. using distilled water as polishing fluid） with Al2O3 or SiO2 can increase return loss to 45CD*250dB, but wet polishing with Al2O3 may produce optical fiber undercut depth of 80CD*2140nm. Wet polishing with SiO2 should be preferentially selected for optical fiber connectors and polishing time should be controlled within 20CD*230s.

Wavelength dependent loss of splice of single-mode fibers

After reviewing three different definitions of mode field diameter of single-mode fibers, coupled efficiency calculation methods associated with lateral offset, longitude separation and wavelength, the effects produced by them, and the influences of splicing defects were discussed in detail. The regularities of the effects were studied according to the first order derivation of couple efficiency formula, and a simplified formula for couple efficiency calculation was presented under the circumstance of slight misalignment, with respect to wavelength, 2, and in a good agreement with the theoretical model. The simplified formula provides a new but simple approach to evaluate wavelength dependent couple efficiency of single-mode fibers. Theoretical analyses and numerical calculations show that, when those defects exist, the wavelength produces additional effects on the couple loss that growth of wavelength causes an increase on the couple efficiency for the lateral offset or longitude separation whereas lessens the couple efficiency due to angular misalignment or mode fields mismatching, and that the wavelength degrades the couple efficiency distinctly when λ≥2.5 μm whereas it distorts the couple slightly in range of λ≤2λ≤2 μm.

Influence of intra-cavity loss on transmission characteristics of fiber Bragg grating Fabry–Perot cavity

A theoretical model of the fiber Bragg grating Fabry–Perot（FBG-FP） transmission spectrum considering loss of FBG and intra-cavity fiber is presented. Several types of FBG-FPs are inscribed experimentally, and their spectra are measured.The results confirm that weak intra-cavity loss is enhanced at the resonance transmission peak, that is, loss of transmission peaks is observably larger than other wavelengths. For FBG-FPs with multi resonance peaks, when the resonance peak wavelength is closer to the Bragg wavelength, the more significant loss effect of resonance transmission peak is exhibited.The measured spectra are fitted with the presented theoretical model. The fitted coefficient of determinations are near 1,which proves the validity of the theoretical model. This study can be applied to measure FBG loss more accurately, without a reference light. It can play an important role in FBG and FBG-FP writing process optimization and application parameter optimization.

Evaluation of the Bending Loss of the Hollow Optical Fiber for Application of the Carbon Dioxide Laser to Endoscopic Therapy

Since carbon dioxide laser is excellent for incision, hemostasis, coagulation, and vaporization of soft tissues, it has been widely applied in clinical treatments as the laser knife. In these days, flexible thin hollow optical fibers transmitting mid-infrared light have been developed, and the application of carbon dioxide laser to endoscopic therapy has become possible. However, it is expected that the irradiation effect is influenced by the change in the laser power at the tip of the hollow optical fiber due to the change in the transmittance by the bending loss. The purpose of this research is to quantitatively evaluate the change in the output power and therapeutic effect by bending the hollow optical fiber in a gastrointestinal endoscope. The change in the transmittance of the hollow optical fiber due to the insertion of the fiber into the endoscope and bending of the head of the endoscope was measured. Then, the relationship between the irradiated laser power and the incision depth for a porcine stomach was investigated. As the results, the most significant decrease in the transmittance of the hollow optical fiber was caused by the insertion of the fiber into the instrument channel of the endoscope, and bending of the head of the endoscope with the angle of 90° decreased the output laser power and incision depth by 10% and 25%, respectively. Therefore, it was confirmed that the bending loss of the hollow optical fiber due to the bending of the head of the endoscope had no significant influence on the endoscopic therapy using the carbon dioxide laser.

High birefringence, low loss, and flattened dispersion photonic crystal fiber for terahertz application

A type of photonic crystal fiber based on Kagome lattice cladding and slot air holes in a rectangular core is investigated. Full vector finite element method is used to evaluate the modal and propagation properties of the designed fiber.High birefringence of 0.089 and low effective material loss of 0.055 cm^-1 are obtained at 1 THz. The y-polarized fundamental mode of the designed fiber shows a flattened and near-zero dispersion of 0±0.45 ps · THz^-1· cm^-1 within a broad frequency range(0.5 THz–1.5 THz). Our results provide the theory basis for applications of the designed fiber in terahertz polarization maintaining systems.

Research on Additional Loss of Guidance Optical Fiber

The factors which cause additional losses of guidance optical fiber in wound state were analyzed.A mathematical model used to analyze the macro-bend losses in the cross region producing in the precision winding process was established.For an actual guidance optical fiber,the measured data of the fiber's additional losses under low temperature and the loss curves with radius were given in the paper.The simulation results were compared with the test data.It shows that the additional losses of optical fiber caused by bending and low temperature can meet the actual requirements of the fiber optical guidance system.The established model can be used to predict the change trend of fiber losses in the winding process with a certain tensile force.

RELATION BETWEEN DYNAMIC LOSS MODULUS AND DIFFUSION COEFFICIENT IN A MODIFIED PET FIBER

The mobility of polymer chain segments is shown to play a major role in the diffusion ofdisperse dyes in a copolymerization modified PET system, monoepoxy compoundCH_3 (CH_3),OCH_2CH--CH_2 modified PET. The rate of dye diffusion (diffusion coefficient D) hasbeen related to the time-dependent mechanical property, dynamic loss modulus E', which iscontrolled by the mobility of chain segments. In this modified copolyester system, the variance ofamount of modifier in the copolyester fibers causes the change in disperse dye diffusion coefficientto fiber, and in the dynamic loss modulus of the fibers, but the relationship between the diffusionand the dynamic loss modulus is in agreement with the theoretical relation derived by Bell andDumbleton. The relation obtained in this paper is:Ln D=-2. 28Ln E'+26. 81

Effect of single point defects on the confinement losses of air-guiding photonic bandgap fibers

The confinement losses in air-guiding photonic bandgap fibers （PBGFs） with air hole missing are studied with the full-vector finite-element method. It is confirmed that there are two loss peaks （1.555 and 1.598 μm） if there is a hole missing in the cladding far from the core. The closer to the core the hole missing is, the larger the confinement losses are, and even no mode could propagate in the core. The main power of the fundamental mode leaks from the core to the cladding defect. The quality of PBGFs can be improved through controlling the number and position of defects.

Effect of γ-ray Radiation on the Loss of Optical Fiber in Visible Range

The mechanism of γ-ray radiation induced absorption loss of the optical fiber in visible range is analyzed. According to the mechanism, the quantitative relation between loss in optical fiber and γ-ray cumulation dose is found by use of methods of solid physics and statistic physics. This quantitative relation is certified in terms of the results of radiation experiment.

The Loss of Weight and Release of Formaldehyde in Acid Treatment of Basofil Fiber

The Basofil fiber is a new type of high-temperature fiber. Its Limiting Oxygen Index (LOI) value reaches 32. It does not melt, drop down or smolder when it contacts fire. The fiber is condensed from melamine and formaldehyde into a cross-linked with methylene-ether and methylene bridge bond. This thesis discusses the change of fiber structure and performance after the acid treatment.

Derivation of General Formula for Coupling Loss of Single-mode Fiber Collimators with Gradient-index Rod Lenses

Gradient-index rod lens (GRIN-lens) whose pitch is ordinary value with bevel ferrule coupling system is analyzed, an equivalent method which can be used to analyze this system is put forward, and a general formula for determining the coupling loss with axes mismatch, radial mismatch, and angular mismatch is derived by use of the Gaussian field approximation and mode-field coupling theory. The experimental results are in good agreement with the theory prediction. It indicates that these formulas are suitable to analyze the gradient-index rod lens coupling system with pigtail fiber.

Hemostatic Effect of Chitosan-based Fiber

[Objective] The aim was to investigate the hemostatic effects of chitosan-based fibre on liver. [Method] The liver hemorrhage model of rabbit was established. Hemostasis was performed with chitosam-based fiber in experimental group, surgicel in control group and no material in blank group. The hemostatic effects were evaluated by total blood loss (TBL) and hemostatic rate. [Result] Experimental group had no bleeding in observation period, with the hemostatic rate of 100% and the blood loss of only (0.443±0.30) g/kg, better than the control group and blank group (P<0.005). [Conclusion] Chitosan-based fiber has effective hemostasis in liver wound, which will provide reliable information for the clinical trials.

一种大模场面积抗弯曲的环芯侧孔少模光纤的研究

为了降低少模光纤的模间耦合和弯曲损耗,增大有效模场面积,设计了一种环芯和侧孔辅助结构的少模光纤。理论分析了这种光纤的有效折射率分布、弯曲损耗和有效模场面积,采用有限元法计算光纤参数对相邻LP模式间最小有效折射率差、有效模场面积和弯曲损耗的影响,各模式之间的最小有效折射率差可达1.7×10^(-3),所有模式的有效模场面积均大于106μm^(2),当弯曲半径为28mm时,各模式弯曲损耗最大仅为10^(-11)dB/m。该结构具有大模场面积,低模间串扰以及更好的抗弯曲性能,延伸了空分复用的研究思路。

Optimization of highly nonlinear dispersion-flattened photonic crystal fiber for supercontinuum generation

A simple type of photonic crystal fiber （PCF） for supercontinuum generation is proposed for the first time. The proposed PCF is composed of a solid silica core and a cladding with square lattice uniform elliptical air holes, which offers not only a large nonlinear coefficient but also a high birefringence and low leakage losses. The PCF with nonlinear coefficient as large as 46 W-1 · km-1 at the wavelength of 1.55 um and a total dispersion as low as ±2.5 ps. nm-1 · km -1 over an ultra-broad waveband range of the S-C-L band （wavelength from 1.46 um to 1.625 um） is optimized by adjusting its structure parameter, such as the lattice constant A, the air-filling fraction f, and the air-hole ellipticity η. The novel PCF with ultra-flattened dispersion, highly nonlinear coefficient, and nearly zero negative dispersion slope will offer a possibility of efficient super-continuum generation in telecommunication windows using a few ps pulses.

Performance of Fiber Cement Slurry in the Oil and Gas Well Cementation

Based on a carbon fiber cement slurry system developed in the previous work, the relationship between the carbon fiber and the performance of the cement slurry was experimentally investigated. Results show that the use of fiber has no effect on the slurry rheological mode, but influences its rheological behavior. When the fiber proportion ranges from 0.12% to 0.19% and the fiber length from 400 to 1,400 μm, the slurry rheological behavior can be improved. Under the normal pressure, the use of fiber can shorten the thickening time of the cement slurry. When the proportion of the constant-length fiber increases, the water loss of the cement slurry decreases first and then increases, and when the fiber length increases (the fiber proportion being kept constant), the water loss shows the same trend. This indicates that there are optimal values for the fiber length and proportion, which vary under the experimental conditions in the following respective ranges: 0.12%-0.37% and 700-1,400 μm .

Fiber core mode leakage induced by refractive index variation in high-power fiber laser

This paper presents an investigation of specific optical fiber core mode leakage behavior that occurs in high-power double-clad fiber lasers as a result of thermally-induced refractive index variations. A model of the power transfer between the core modes and the cladding modes during thermally-induced refractive index variations is established based on the mode coupling theory. The results of numerical simulations based on actual laser parameters are presented. Experimental measurements were also carried out, the results showed good agreement with the corresponding simulation results.

Analysis of Optical Properties for Square, Circular and Hexagonal Photonic Crystal Fiber

This paper presents four rings square, circular, and hexagonal photonic crystal fiber (PCF) geometry for analyzing different optical properties in a wavelength ranging from 800 nm to 1600 nm. These three types of geometry have been used for analyzing Effective area, Propagation constant, Confinement loss and Waveguide dispersion. Silica glass is chosen as background material and the cladding region is made of four air hole layers. COMSOL Multiphysics (v.5) software is used to simulate these proposed PCF geometries. From the numerical analysis, it is found that the effective area is small for hexagonal PCF geometry and large for square PCF geometry (11.827 &mu;m2, 10.588 &mu;m2 and 9.405 &mu;m2 for square, circular, and hexagonal PCF geometry respectively). From the analysis, the Confinement loss is approximately zero at wavelength ranges from 800 nm to 1250 nm and approximately zero waveguide dispersion is achieved from 900 nm to 1500 nm for all the three PCF structures. Again, negative dispersion approximately &minus;30.354 ps/(nm&sdot;km) is achieved for circular PCF structure at the wavelength of 900 nm.