Response of warm season secondary pollutants to emissions and meteorology in the North China Plain region during 2018-2022

自2013年起中国空气质量虽改善,但华北平原(NCP)重污染仍存在且二次污染加剧,而人们对其成因和变化了解有限.本研究利用2018-2022年数据,借助CMAQ模型探讨此污染响应.结果显示,在2018-2022年间,PM_(2.5)浓度显著下降31%-37%,O_(3)和NO_(2)的年下降速率分别为1%和0.5%SIA和SOA也显著减少,每年分别减少9%和6%PM_(2.5)主要因排放减少而下降,而O_(3)则受气象影响而波动.硫酸盐和铵下降的主因是减排,而硝酸盐对气象变化敏感排放和气象变化对SOA的总体减少同样重要,但人为SOA对排放控制敏感生物SOA易受气象变化影响.研究强调了控制人为排放对缓解NCP地区夏季二次污染的重要性.

An Integrated Analysis on the Synergistic Reduction of Carbon and Pollution Emissions from China’s Iron and Steel Industry

Decarbonization and decontamination of the iron and steel industry(ISI),which contributes up to 15%to anthropogenic CO_(2) emissions(or carbon emissions)and significant proportions of air and water pollutant emissions in China,are challenged by the huge demand for steel.Carbon and pollutants often share common emission sources,indicating that emission reduction could be achieved synergistically.Here,we explored the inherent potential of measures to adjust feedstock composition and technological structure and to control the size of the ISI to achieve carbon emission reduction(CER)and pollution emission reduction(PER).We investigated five typical pollutants in this study,namely,petroleum hydrocarbon pollutants and chemical oxygen demand in wastewater,particulate matter,SO_(2),and NO_(x) in off gases,and examined synergies between CER and PER by employing cross elasticity for the period between 2022 and 2035.The results suggest that a reduction of 8.7%-11.7%in carbon emissions and 20%-31%in pollution emissions(except for particulate matter emissions)could be achieved by 2025 under a high steel scrap ratio(SSR)scenario.Here,the SSR and electric arc furnace(EAF)ratio serve critical roles in enhancing synergies between CER and PER(which vary with the type of pollutant).However,subject to a limited volume of steel scrap,a focused increase in the EAF ratio with neglection of the available supply of steel scrap to EAF facilities would lead to an increase carbon and pollution emissions.Although CER can be achieved through SSR and EAF ratio optimization,only when the crude steel production growth rate remains below 2.2%can these optimization measures maintain the emissions in 2030 at a similar level to that in 2021.Therefore,the synergistic effects between PER and CER should be considered when formulating a development route for the ISI in the future.

Investigating the Changes in Air Pollutant Emissions over the Beijing-Tianjin-Hebei Region in February from 2014 to 2019 through an Inverse Emission Method

In recent years,China has implemented several measures to improve air quality.The Beijing-Tianjin-Hebei(BTH)region is one area that has suffered from the most serious air pollution in China and has undergone huge changes in air quality in the past few years.How to scientifically assess these change processes remain the key issue in further improving the air quality over this region in the future.To evaluate the changes in major air pollutant emissions over this region,this paper employs ensemble Kalman filtering(EnKF)for integrating the national ground monitoring pollutant observation data and the Nested Air Quality Prediction Modeling System(NAQPMS)simulation data to inversely estimate the emission rates of SO_(2),NOX,CO,and primary PM_(2.5)over BTH region in February from 2014 to 2019.The results show that SO_(2),NOX,CO,and primary PM_(2.5)emissions in the BTH region decreased in February from 2014 to 2019 by 83%,37%,41%,and 42%,while decreases in Beijing during this period were 86%,67%,59%,and 65%,respectively.Compared with the prior emission inventory,the inversion emission inventory reduces the uncertainty of multi-pollutant simulation in the BTH region,with simulated root mean square errors of the monthly average concentrations of SO_(2),NOX,PM_(2.5),and CO reduced by 41%,30%,31%,and 22%,respectively.The average uncertainties of SO_(2),NOX,PM_(2.5),and CO inversion emissions in2014-19 are±14.03%yr^(-1),±28.91%yr^(-1),±126.15%yr^(-1),and±43.58%yr^(-1).Compared with the uncertainty of MEIC emission,the uncertainties of all species changed by+2%yr^(-1),-2%yr^(-1),-26%yr^(-1),and-4%yr^(-1),respectively.The spatial distribution results illustrate that air pollutant emissions are mainly distributed over the eastern and southern BTH regions.The spatial gap between the inversion emissions and MEIC emissions was further closed in 2019 compared to 2014.The results of this paper can provide a new reference for assessing changes in air pollution emissions over the BTH region in recent years and validating a bottom-up emission inventory.

Effect of steam spraying on a sintering bed on sinter quality and the emission of flue gas pollutants

The technology for spraying a sintering bed and thus improving sinter quality indicators while reducing the emission of flue gas pollutants has recently become an important research topic.The impacts on sinter quality and emissions when spraying the sintering surface with different amounts and flow rates of steam were investigated in this study.The sinter quality indicators were most effectively improved by spraying 180 g of steam flow continuously at a rate of 0.02 m^(3)/min for 15 min after ignition for 8 min.The optimal effect on emission reduction was obtained by spraying 90 g of steam flow continuously at a rate of 0.01 m^(3)/min for 15 min after ignition for 8 min.

Inventory of Atmospheric Pollutant Emissions from Burning of Crop Residues in China Based on Satellite-retrieved Farmland Data

The burning of crop residues emits large quantities of atmospheric aerosols.Published studies have developed inventories of emissions from crop residue burning based on statistical data.In contrast,this study used satellite-retrieved land-cover data(1 km×1 km)as activity data to compile an inventory of atmospheric pollutants emitted from the burning of crop residues in China in 2015.The emissions of PM10,PM2.5,VOCs,NOx,SO2,CO,and NH3 from burning crop straw on nonirrigated farmland in China in 2015 were 610.5,598.4,584.4,230.6,35.4,3329.3,and 36.1 Gg(1 Gg=109 g),respectively;the corresponding emissions from burning paddy rice residues were 234.1,229.7,342.3,57.5,57.5,1122.1,and 21.5 Gg,respectively.The emissions from crop residue burning showed large spatial and temporal variations.The emissions of particulate matter and gaseous pollutants from crop residue burning in nonirrigated farmland were highest in east China,particularly in Shandong,Henan,Anhui,and Sichuan provinces.Emissions from burning paddy rice residue were highest in east and central China,with particularly high levels in Shandong,Jiangsu,Zhejiang,and Hunan provinces.The monthly variations in atmospheric pollutant emissions were similar among different regions,with the highest levels observed in October in north,northeast,northwest,east,and southwest China and in June and July in central and south China.The developed inventory of emissions from crop residue burning is expected to help improve air quality models by providing high-resolution spatial and temporal data.

Impacts of Migration on Urban Environmental Pollutant Emissions in China: A Comparative Perspective

In recent years,researchers have devoted considerable attention to identifying the causes of urban environmental pollution.To determine whether migrant populations significantly affect urban environments,we examined the relationship between urban environmental pollutant emissions and migrant populations at the prefectural level using data obtained for 90 Chinese cities evidencing net in-migration.By dividing the permanent populations of these cities into natives and migrants in relation to the population structure,we constructed an improved Stochastic Impacts by Regression on Population,Affluence and Technology model(STIRPAT)that included not only environmental pollutant emission variables but also variables on the cities’attributes.We subsequently conducted detailed analyses of the results of the models to assess the impacts of natives and migrants on environmental pollutant emissions.The main findings of our study were as follows:1)Migrant populations have significant impacts on environmental emissions both in terms of their size and concentration.Specifically,migrant populations have negative impacts on Air Quality Index(AQI)as well as PM2.5 emissions and positive impacts on emissions of NO2 and CO2.2)The impacts of migrant populations on urban environmental pollutant emissions were 8 to 30 times weaker than that of local populations.3)Urban environmental pollutant emissions in different cities differ significantly according to variations in the industrial structures,public transportation facilities,and population densities.

Pollutant emissions,energy consumption and economic development in China:Evidence from dynamic panel data

This study investigates the relationship among pollutant emissions,energy consumption and economic development in China during the period 1982-2007 by using a one-step GMM-system model under a multivariable panel VAR framework,controlling for capital stock and labor force.Regarding the data for all 28 provinces as a whole,we find that there is a unidirectional positive relationship running from pollutant emission to economic development and a unidirectional negative relationship between pollutant emission and energy consumption.Based on traditional economic planning,the panel data of28 provinces are divided into two cross-province groups.It is discovered that in the eastern coastal region of China,there is only a unidirectional positive causal relationship leading from economic development to pollutant emission;while in the central and western regions,there are the unidirectional Granger causal relationships between pollutant emission and energy consumption,as well as between pollutant emission and economic development.There is also a unique unidirectional causal relationship running from economic development to energy consumption,which does not appear in the eastem coastal region or in China as a whole.

Air Pollutant Emissions from Coal-Fired Power Plants

In order to investigate the factual air pollutant emissions from Henan’s power sector in 2010, SO2, NOx and PM emissions from 24 generating sets from 15 coal-fired power plants have been measured. It is shown that SO2 emission values from 22 of 24 generating sets conform to the requirements, which is causing by the high performance of the flue gas desulfurization system. Much higher NOx emissions indicate that the construction of flue gas denitrition systems is necessary. PM emissions varied from 2.3 kg to 299.9 kg per hour. Total sulfur, moisture, ash and volatile content, and net caloric value of coals were investigated to elucidate the relationship between coals and air pollutant emissions.

Near-Zero Air Pollutant Emission Technologies and Applications for Clean Coal-Fired Power

Coal is the dominant energy source in China,and coal-fired power accounts for about half of coal consumption.However,air pollutant emissions from coal-fired power plants cause severe ecological and environmental problems.This paper focuses on near-zero emission technologies and applications for clean coal-fired power.The long-term operation states of near-zero emission units were evaluated,and synergistic and special mercury(Hg)control technologies were researched.The results show that the principle technical route of near-zero emission,which was applied to 101 of China’s coal-fired units,has good adaptability to coal properties.The emission concentrations of particulate matter(PM),SO2,and NOx were below the emission limits of gas-fired power plants and the compliance rates of the hourly average emission concentrations reaching near-zero emission in long-term operation exceeded 99%.With the application of near-zero emission technologies,the generating costs increased by about 0.01 CNY∙(kW∙h)-1.However,the total emissions of air pollutants decreased by about 90%,resulting in effective improvement of the ambient air quality.Furthermore,while the Hg emission concentrations of the near-zero emission units ranged from 0.51 to 2.89μg∙m^-3,after the modified fly ash(MFA)special Hg removal system was applied,Hg emission concentration reached as low as 0.29μg∙m^-3.The operating cost of this system was only 10%-15%of the cost of mainstream Hg removal technology using activated carbon injection.Based on experimental studies carried out in a 50000 m^3∙h^-1 coal-fired flue gas pollutant control pilot platform,the interaction relationships of multi-pollutant removal were obtained and solutions were developed for emissions reaching different limits.A combined demonstration application for clean coal-fired power,with the new“1123”eco-friendly emission limits of 1,10,20 mg∙m^-3,and 3μg∙m^-3,respectively,for PM,SO2,NOx,and Hg from near-zero emission coal-fired power were put forward and realized,providing engineering and technical support for the national enhanced pollution emission standards.

Exploration of Market Mechanism on Controlling Air Pollution and Carbon Emissions in China

Based on increasingly grim situation of carbon emissions in China,air pollution control and carbon emission reduction are very important. Therefore,combining with China’s specific national conditions,we should explore the market mechanisms to control air pollution and reduce carbon emissions in China. The achievement of the carbon emission reduction purpose needs to establish the carbon trade market based on intensity emission reduction and suitable for China’s national conditions. By setting the cross-industry,cross-region and cross-time carbon trade scenarios in China,this paper tries to study the market mechanism of carbon intensity trade among industries and regions and based on carbon finance mechanism.

Air pollutants and greenhouse gases emission inventory for power plants in the Antarctic

Emissions of air pollutants and greenhouse gases into the atmosphere in Antarctica from power plants with diesel generators(the main sources of energy at Antarctic research stations and the main stationary sources of anthropogenic emissions in the Antarctic)were assessed.A bottom-up approach was used to compile an emission inventory for the Antarctic.This involved estimating emissions at various spatial levels by sequentially aggregating estimate emissions from point emission sources.This is the first time this approach has been proposed and used.Emissions of CO2,NOx,particulate matter(PM10),and CO in the modern period were estimated at the research station,geographic region,natural domain,biogeographic region,continent section,and whole continent scales.Yearly emissions are presented here,but the approach allows emissions at different averaging periods to be estimated.This means mean or maximum yearly,monthly,daily,or hourly emissions can be estimated.The estimates could be used to model pollutant transmission and dispersion,assess the impacts of pollutants,and develop emission forecasts for various scenarios.

Variation of toxic pollutants emission during a feeding cycle from an updraft fixed bed gasifier for disposing rural solid waste

The variation of toxic pollutants emission during a feeding cycle was examined by field monitoring from a batch feeding updraft fixed bed gasifier for disposing rural domestic solid waste. Results showed that the content of oxygen in flue gas gradually increased, while SO_2 and HCl in flue gas decreased with time after feeding in a whole feeding cycle. Although large amount of CO was produced during the gasifying, low CO content in flue gas could be obtained after the heat treatment with an electric heating device. The distribution characteristics of dioxin congeners in flue gas indicted the re-synthesis of dioxins after flue gas heating, and the increase of oxygen promoted the synthesis of dioxins. The emission content of dioxins could meet the standard(0.1 ng I-TEQ·m^(-3),GB18458-2014) of China when the oxygen content was controlled below 8.3%. Hence, for a batch feeding gasifier,low oxygen condition should be offered by reducing air intake at the later stage of feeding cycle in order to decrease the re-synthesis of dioxins after the flue gas heating.

Research on the impact of manufacturing servitization on environmental pollution:spatial econometric analysis of sulfur dioxide based on 284 prefecture-level cities

Using China’s regional input–output table,the paper constructs indicators of manufacturing servitization,matches manufacturing servitization at the regional level with city data,and uses spatial econometrics to empirically analyze the impact of manufacturing servitization on urban sulfur dioxide(SO_(2))emissions within the classical Environmental Kuznets Curve(EKC)framework.The results show that manufacturing servitization can reduce SO_(2) emissions.Producer servitization and consumptive services can both significantly reduce industrial SO_(2) emissions.Transportation and warehousing servitization,information servitization,leasing,and commercial servitization,technology research and development servitization significantly reduce SO_(2) emissions;technology research and development servitization,in particular,have the largest influence coefficient,while the reduction effect of servitization in the wholesale and retail and finance sectors is not significant.The study also found that servitization reduced the SO_(2) emissions through technological innovation and industrial structure upgrading.

Angle Scattering Method for Soot Concentration Measurement under Ultra-Low Emissions Condition

Aiming at the problem of soot concentration measurement under ultra-low emission conditions,a forward small angle soot concentration measurement method is proposed.Taking a typical boiler emission of 0.1μm-3.0μm bimodal distribution soot as an object,the particle scatter simulation calculation under different parameters is carried out,and the influence of detection angle and particle size on the angular scatteringmeasurement of ultra-low emission soot is analyzed.The influence of detection angle and particle size on the angular scatteringmeasurement of ultra-lowemission soot is analyzed.Preferably,thewavelength of incident light is 650 nm,and the forward detection angle parameter is 15◦for the design of forward small angle soot concentration measurement system.An experimental system for measuring soot with standard concentration is built.Experiments of particle concentration measurement of 1.0μm and 3.0μm under ultra-low emission conditions are carried out.The results show that the average deviation of soot concentration measurement is less than 0.10 mg/m3 under the condition of ultra-low emission by using 15◦of forward detection,which provides an effective way for monitoring ultra-low emission soot concentration in coal-fired power plants.

Reducing pollution by adjusting China's trade mix—A case study using SO_2 emissions

This paper investigates the impact of foreign trade on China’s pollution emissions using an input-output model. Generally speaking,as exports are more pollution-intensive than imports,foreign trade helps reduce China’s emissions. Given the huge surplus of trade in goods and declines in the ratio of import/export emission intensities,an emission deficit emerged in China’s foreign trade.The fundamental cause is the worsening product mix of foreign trade.With technical progress outpaced by foreign trade growth,however,total emissions of export goods have been on the rise.

Study on the Environmental Quality Guarantee Ratio on the Basis of Total Air Pollutant Emission Amount Control

The hourly and daily air quality concentration in the total air pollutant emission amount control zone is not sure to be continuously up to national ambient air quality standard, even though the total annual air pollutant emission is permitted under the total air pollutant emission amount control (TAPEAC) on the basis of A-value method. So the concept of the environmental quality guarantee ratio (EQGR) for TAPEAC is advanced in this paper and its quantitative formula is figured out for both hourly and daily EQGR. It is concluded that the EQGR is related with the yearly arrangement of A-value besides the pollutant type. According to the meteorological data in a lower area along Yangtze River in 2000, the yearly A-value trend is analyzed. Based on the data, the hourly EQGR of SO 2 and NO 2 is respectively 97.4% and 90.2%, and daily EQGR respectively 90.2% and 79.5%.

One of the Scenarios for Reduction the Emission of Pollutants from Motor Vehicle in the Territory of the Republic of Kosovo

Together with development of the industry, there is present a continuous increase number of motor vehicles that contributes to the growth of the emission of pollutants. This is the main reason that during eighties of the last century, a special attention has started to be paid on pollution emissions from vehicles. It is important to note that most of the current emissions are formed directly and are present in urban areas. The aim of this research was to determine the emission of pollutants in the territory of the Republic of Kosovo, when circulates more than 380,000 motor vehicles. Taking into consideration the daily traffic jam, and the fact that gasoline engines are responsible for most emissions of CO, while diesel engines for NOx emission, the conclusion arises that there is necessary a special dedication to the emission of pollutants and to the definition of the measures to reduce or control them. Based on the performed tests and realistic assessment of the overall situation in the Republic of Kosovo, the current situation on the amount of pollution was compared with development countries in the region as a matter in the research. The results obtained, suggest to the most important causes that increase pollutant emission from motor vehicles and offer actions to keep the same level or to reduce them.

Preliminary Study on the Emission Rules of Sulfur Derivative Pollutants in Putrefactive Cyanobacteria

[Objective]The aim was to study the characteristics of the emission of sulfur derivative pollutants in cyanobacteria.[Method]Based on water odor in drink water from Gonghu Bay in Lake Taihu,the sulfur derivatives pollutants were extracted by head space solid phase microextraction（HS-SPME） and the odor substance was identified by gas chromatography and mass spectrometry（GC-MS）.Decomposed simulation was conducted in closed tube of water and cyanobacteria samples collected from Gonghu Bay in Lake Taihu.The cyanobacteria rotten odor substances was analyzed and detected by HS-SPME-GC-MS for 10 days.The sulfur derivative pollutant was expounded.[Result]The primary or secondary metabolites by cyanobacteria in water samples such as β-cyclocitral,indol,methylphenol,mercaptan and thioether were detected with scan.During the decomposition process,the emission of β-cyclocitral changed little.The maximum emission of dimethyl trisulfide appeared on the seventh and eighth day.The maximum emission of dimethyl disulfide appeared on the forth day.The maximum emission of the diethyl sulfide was on the eighth and ninth day.The maximum concentration of dimethyl trisulfide was 2 344.79 ng/L,which was much more than the olfactory threshold.[Conclusion] The sewage in Gonghu Bay in the end of May in 2007 resulted from the accumulation of cyanobacteria.

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy,but also the largest source of industrial air pollution.Due to the current status of emissions in the iron and steel industry,ultra-low pollutant emission control technology has been researched and developed.Liquid-phase proportion control technology has been developed for magnesian fluxed pellets,and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets(80%)for the first time in China to realize source emission reduction of SO_(2)and NO_(x).Based on the characteristics of high NO_(x)concentrations and the coexistence of multiple pollutants in coke oven flue gas,low-NO_(x)combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur.Based on the characteristics of co-existing multiple pollutants in pellet flue gas,selective non-catalytic reduction(SNCR)coupled with ozone oxidation and spray drying adsorption(SDA)was developed,which significantly reduces the operating cost of the system.In the light of the high humidity and high alkalinity in flue gas,filter materials with high humidity resistance and corrosion resistance were manufactured,and an integrated pre-charged bag dust collector device was developed,which realized ultralow emission of fine particles and reduced filtration resistance and energy consumption in the system.Through source emission reduction,process control and end-treatment technologies,five demonstration projects were built,providing a full set of technical solutions for ultra-low emissions of dust,SO_(2),NO_(x),SO_(3),mercury and other pollutants,and offering technical support for the green development of the iron and steel industry.

International trade,pollution industry transfer and CO_2 emissions in Chinese industries

Will developed countries turn China into a haven for "dirty" industries through international trade by specializing in producing and exporting "clean" products and importing pollution-intensive products from China? How does international trade affect Chinese industries' CO2 emissions? This paper presents an empirical test of these hypotheses using statistical techniques such as the environmental input-output model and net exports as a proportion of consumption(NETXC) based on the trade data of 20 industries in China,and G7 and OECD developed countries.In this study,we draw three conclusions:(1) The proportion of domestically produced CO2 emissions in CO2 emissions embodied in products exported from China has been declining;(2) Industries migrated or displaced from developed countries into China include both "dirty" and "clean" industries;(3) International trade can help industries reduce CO2 emissions in aggregate and per unit of output.China has not become a haven for developed countries' "dirty" industries as a result of international trade.