The development,the underlying technology and the current status of the fully diode-pumped solid-state laser system POLARIS is reviewed.Currently,the POLARIS system delivers 4 J energy,144 fs long laser pulses with an...The development,the underlying technology and the current status of the fully diode-pumped solid-state laser system POLARIS is reviewed.Currently,the POLARIS system delivers 4 J energy,144 fs long laser pulses with an ultra-high temporal contrast of 5 × 1012 for the ASE,which is achieved using a so-called double chirped-pulse amplification scheme and cross-polarized wave generation pulse cleaning.By tightly focusing,the peak intensity exceeds 3.5 × 1020 W cm-2.These parameters predestine POLARIS as a scientific tool well suited for sophisticated experiments,as exemplified by presenting measurements of accelerated proton energies.Recently,an additional amplifier has been added to the laser chain.In the ramp-up phase,pulses from this amplifier are not yet compressed and have not yet reached the anticipated energy.Nevertheless,an output energy of 16.6 J has been achieved so far.展开更多
The collective response of electrons in an ultrathin foil target irradiated by an ultraintense(~6×10^(20)W cm^(-2)) laser pulse is investigated experimentally and via 3D particle-in-cell simulations. It is shown ...The collective response of electrons in an ultrathin foil target irradiated by an ultraintense(~6×10^(20)W cm^(-2)) laser pulse is investigated experimentally and via 3D particle-in-cell simulations. It is shown that if the target is sufficiently thin that the laser induces significant radiation pressure, but not thin enough to become relativistically transparent to the laser light, the resulting relativistic electron beam is elliptical, with the major axis of the ellipse directed along the laser polarization axis. When the target thickness is decreased such that it becomes relativistically transparent early in the interaction with the laser pulse, diffraction of the transmitted laser light occurs through a so called ‘relativistic plasma aperture', inducing structure in the spatial-intensity profile of the beam of energetic electrons. It is shown that the electron beam profile can be modified by variation of the target thickness and degree of ellipticity in the laser polarization.展开更多
Modern chirped pulse amplification laser systems with continuously improving controllability and increasing power are about to reach intensities of up to 10^(22) W cm^(-2) and have proven their potential to accelerate...Modern chirped pulse amplification laser systems with continuously improving controllability and increasing power are about to reach intensities of up to 10^(22) W cm^(-2) and have proven their potential to accelerate ions out of plasma to several tens percent of the speed of light. For enabling application, one important step is to increase the repetition rate at which ion bunches are at the disposal. In particular, techniques used so far for thin foil target production can require several days of preparing reasonable amounts for a single campaign. In this paper we describe the reasonably droplet method which we have tested and improved so that the emerging foils with thicknesses of a few nanometres up to micrometre can be used as targets for laser ion acceleration. Their quality and performance can compete with so far employed techniques thereby enabling the production of hundreds of targets per day.展开更多
Processing of materials by ultrashort laser pulses has evolved significantly over the last decade and is starting to reveal its scientific,technological and industrial potential.In ultrafast laser manufacturing,optica...Processing of materials by ultrashort laser pulses has evolved significantly over the last decade and is starting to reveal its scientific,technological and industrial potential.In ultrafast laser manufacturing,optical energy of tightly focused femtosecond or picosecond laser pulses can be delivered to precisely defined positions in the bulk of materials via two-/multi-photon excitation on a timescale much faster than thermal energy exchange between photoexcited electrons and lattice ions.Control of photoionization and thermal processes with the highest precision,inducing local photomodification in sub-100-nm-sized regions has been achieved.State-of-the-art ultrashort laser processing techniques exploit high 0.1–1μm spatial resolution and almost unrestricted three-dimensional structuring capability.Adjustable pulse duration,spatiotemporal chirp,phase front tilt and polarization allow control of photomodification via uniquely wide parameter space.Mature opto-electrical/mechanical technologies have enabled laser processing speeds approaching meters-per-second,leading to a fast lab-to-fab transfer.The key aspects and latest achievements are reviewed with an emphasis on the fundamental relation between spatial resolution and total fabrication throughput.Emerging biomedical applications implementing micrometer feature precision over centimeter-scale scaffolds and photonic wire bonding in telecommunications are highlighted.展开更多
A new crystal spectrometer for application in X-ray opacity experiments is proposed. The conditions necessary to yield broad spectral coverage with a resolution >500, strong rejection of hard X-ray backgrounds and ...A new crystal spectrometer for application in X-ray opacity experiments is proposed. The conditions necessary to yield broad spectral coverage with a resolution >500, strong rejection of hard X-ray backgrounds and negligible source broadening for extended sources are formulated. In addition, the design, response modeling and reporting of an elliptical crystal spectrometer in conjunction with a linear detector are presented. The measured results demonstrate the performance of the new crystal spectrometer with a broad energy coverage range, high spectral resolution, and high luminosity(good collection efficiency). This spectrometer can be used in combination with point-projection backlighting techniques as utilized in X-ray opacity experiments. Specifically, the X-ray source, transmission and self-emission spectra of the sample can be measured simultaneously in a single shot, which can reduce the experimental uncertainties from shot-to-shot fluctuations. The new crystal spectrometer has been used in the X-ray opacity experiment to precisely measure the aluminum K-absorption edge shift in the energy range around 1.560 keV in strongly compressed matter. It is demonstrated that the spectrometer can be used to realize measurements of new and unpredictable physical interactions of interest, as well as basic and applied high-energy-density science.展开更多
The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of 10^(12) A cm^(-2...The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of 10^(12) A cm^(-2). The effects of ultrahigh acceleration of plasma blocks with high energy proton beams are proposed for muon production in a compact magnetic fusion device. The proposed new scheme consists of an ignition fusion spark by muon catalyzed fusion(μCF) in a small mirror-like configuration where low temperature D–T plasma is trapped for a duration of 1 μs. This initial fusion spark produces sufficient alpha heating in order to initiate the fusion process in the main device. The use of a multi-fluid global particle and energy balance code allows us to follow the temporal evolution of the reaction rate of the fusion process in the device. Recent progress on the ICAN and IZEST projects for high efficient high power and high repetition rate laser systems allows development of the proposed device for clean energy production. With the proposed approaches,experiments on fusion nuclear reactions and μCF process can be performed in magnetized plasmas in existing kJ/PW laser facilities as the GEKKO-LFEX, the PETAL and the ORION or in the near future laser facilities as the ELI-NP Romanian pillar.展开更多
Interaction between high-intensity lasers with solid targets is the key process in a wide range of novel laser-based particle accelerator schemes,as well as electromagnetic radiation sources.Common to all the processe...Interaction between high-intensity lasers with solid targets is the key process in a wide range of novel laser-based particle accelerator schemes,as well as electromagnetic radiation sources.Common to all the processes is the generation of femtosecond pulses of relativistic electrons emitted from the targets as forerunners of the later-time principal products of the interaction scheme.In this paper,some diagnostics employed in laser–solid matter interaction experiments related to electrons,protons,ions,electromagnetic pulses(EMPs)and X-rays are reviewed.Then,we present our experimental study regarding fast electrons and EMPs utilizing a femtosecond-resolution detector previously adopted only in accelerator facilities.展开更多
基金funding from the European Commission’s (EC) 7th Framework Programme (LASERLAB-EUROPE,grant no.228334)from the Bundesministerium fr Bildung und Forschung (BMBF) (03ZIK445 and 03Z1H531)
文摘The development,the underlying technology and the current status of the fully diode-pumped solid-state laser system POLARIS is reviewed.Currently,the POLARIS system delivers 4 J energy,144 fs long laser pulses with an ultra-high temporal contrast of 5 × 1012 for the ASE,which is achieved using a so-called double chirped-pulse amplification scheme and cross-polarized wave generation pulse cleaning.By tightly focusing,the peak intensity exceeds 3.5 × 1020 W cm-2.These parameters predestine POLARIS as a scientific tool well suited for sophisticated experiments,as exemplified by presenting measurements of accelerated proton energies.Recently,an additional amplifier has been added to the laser chain.In the ramp-up phase,pulses from this amplifier are not yet compressed and have not yet reached the anticipated energy.Nevertheless,an output energy of 16.6 J has been achieved so far.
基金supported by EPSRC (grants:EP/J003832/1,EP/M018091/1,EP/L001357/1,EP/K022415/1 and EP/L000237/1)EPSRC grant EP/G054940/1+2 种基金STFC (grant number ST/K502340/1)the US Air Force Office of Scientific Research (grant:FA8655-13-1-3008)the European Unions Horizon 2020 research and innovation programme (grant agreement No 654148 Laserlab-Europe)
文摘The collective response of electrons in an ultrathin foil target irradiated by an ultraintense(~6×10^(20)W cm^(-2)) laser pulse is investigated experimentally and via 3D particle-in-cell simulations. It is shown that if the target is sufficiently thin that the laser induces significant radiation pressure, but not thin enough to become relativistically transparent to the laser light, the resulting relativistic electron beam is elliptical, with the major axis of the ellipse directed along the laser polarization axis. When the target thickness is decreased such that it becomes relativistically transparent early in the interaction with the laser pulse, diffraction of the transmitted laser light occurs through a so called ‘relativistic plasma aperture', inducing structure in the spatial-intensity profile of the beam of energetic electrons. It is shown that the electron beam profile can be modified by variation of the target thickness and degree of ellipticity in the laser polarization.
基金supported by the DFG funded Cluster of Excellence Munich Centre for Advanced Photonics and the Transregio 18
文摘Modern chirped pulse amplification laser systems with continuously improving controllability and increasing power are about to reach intensities of up to 10^(22) W cm^(-2) and have proven their potential to accelerate ions out of plasma to several tens percent of the speed of light. For enabling application, one important step is to increase the repetition rate at which ion bunches are at the disposal. In particular, techniques used so far for thin foil target production can require several days of preparing reasonable amounts for a single campaign. In this paper we describe the reasonably droplet method which we have tested and improved so that the emerging foils with thicknesses of a few nanometres up to micrometre can be used as targets for laser ion acceleration. Their quality and performance can compete with so far employed techniques thereby enabling the production of hundreds of targets per day.
基金support by a project‘ReSoft’(SEN-13/2015)from the Research Council of Lithuaniasupport by JSPS Kakenhi Grant No.15K04637+1 种基金support via ARC Discovery DP120102980Gintas Šlekys for the partnership project with Altechna Ltd on industrial fs-laser fabrication.
文摘Processing of materials by ultrashort laser pulses has evolved significantly over the last decade and is starting to reveal its scientific,technological and industrial potential.In ultrafast laser manufacturing,optical energy of tightly focused femtosecond or picosecond laser pulses can be delivered to precisely defined positions in the bulk of materials via two-/multi-photon excitation on a timescale much faster than thermal energy exchange between photoexcited electrons and lattice ions.Control of photoionization and thermal processes with the highest precision,inducing local photomodification in sub-100-nm-sized regions has been achieved.State-of-the-art ultrashort laser processing techniques exploit high 0.1–1μm spatial resolution and almost unrestricted three-dimensional structuring capability.Adjustable pulse duration,spatiotemporal chirp,phase front tilt and polarization allow control of photomodification via uniquely wide parameter space.Mature opto-electrical/mechanical technologies have enabled laser processing speeds approaching meters-per-second,leading to a fast lab-to-fab transfer.The key aspects and latest achievements are reviewed with an emphasis on the fundamental relation between spatial resolution and total fabrication throughput.Emerging biomedical applications implementing micrometer feature precision over centimeter-scale scaffolds and photonic wire bonding in telecommunications are highlighted.
基金supported by the National Natural Science Foundation of China (Nos. 11575168 and 61475146)the funding through IFSA Collaborative Innovation Center, Shanghai Jiao Tong University, Shanghai 200240, China
文摘A new crystal spectrometer for application in X-ray opacity experiments is proposed. The conditions necessary to yield broad spectral coverage with a resolution >500, strong rejection of hard X-ray backgrounds and negligible source broadening for extended sources are formulated. In addition, the design, response modeling and reporting of an elliptical crystal spectrometer in conjunction with a linear detector are presented. The measured results demonstrate the performance of the new crystal spectrometer with a broad energy coverage range, high spectral resolution, and high luminosity(good collection efficiency). This spectrometer can be used in combination with point-projection backlighting techniques as utilized in X-ray opacity experiments. Specifically, the X-ray source, transmission and self-emission spectra of the sample can be measured simultaneously in a single shot, which can reduce the experimental uncertainties from shot-to-shot fluctuations. The new crystal spectrometer has been used in the X-ray opacity experiment to precisely measure the aluminum K-absorption edge shift in the energy range around 1.560 keV in strongly compressed matter. It is demonstrated that the spectrometer can be used to realize measurements of new and unpredictable physical interactions of interest, as well as basic and applied high-energy-density science.
文摘The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of 10^(12) A cm^(-2). The effects of ultrahigh acceleration of plasma blocks with high energy proton beams are proposed for muon production in a compact magnetic fusion device. The proposed new scheme consists of an ignition fusion spark by muon catalyzed fusion(μCF) in a small mirror-like configuration where low temperature D–T plasma is trapped for a duration of 1 μs. This initial fusion spark produces sufficient alpha heating in order to initiate the fusion process in the main device. The use of a multi-fluid global particle and energy balance code allows us to follow the temporal evolution of the reaction rate of the fusion process in the device. Recent progress on the ICAN and IZEST projects for high efficient high power and high repetition rate laser systems allows development of the proposed device for clean energy production. With the proposed approaches,experiments on fusion nuclear reactions and μCF process can be performed in magnetized plasmas in existing kJ/PW laser facilities as the GEKKO-LFEX, the PETAL and the ORION or in the near future laser facilities as the ELI-NP Romanian pillar.
文摘Interaction between high-intensity lasers with solid targets is the key process in a wide range of novel laser-based particle accelerator schemes,as well as electromagnetic radiation sources.Common to all the processes is the generation of femtosecond pulses of relativistic electrons emitted from the targets as forerunners of the later-time principal products of the interaction scheme.In this paper,some diagnostics employed in laser–solid matter interaction experiments related to electrons,protons,ions,electromagnetic pulses(EMPs)and X-rays are reviewed.Then,we present our experimental study regarding fast electrons and EMPs utilizing a femtosecond-resolution detector previously adopted only in accelerator facilities.
