基于“GOLD原则”的金课教学法研究与实践——以离散数学课程为例

针对目前金课教学存在的问题,提出基于“GOLD原则”的金课教学法,从目标(Goal)、选项(Option)、领导(Leading)、展示(Display)4个步骤具体阐述,以离散数学课堂为例介绍基于“GOLD原则”的金课教学法的教学过程,说明教学效果。

Characteristics of Gold Mineralization at the Baguiomo Gold Panning Site, Koudougou Region, Burkina Faso, West Africa

The Birimian Baguiomo formations are located in the northern part of the Boromo greenstone belt. In this belt, the volcanic rocks (tholeiitic basalt, calcalkaline basalt, andesite) hosting the gold mineralization are located in the Kwademen-Baguiomo shear zone. This mineralization, located only a few kilometers from the Kwademen gold deposit, is uncharacterized and, together with the latter, could constitute a gold potential capable of being economically exploitable. It is in this sense that this work is carried out with a view to characterizing the gold mineralization of the Baguiomo gold panning site. To carry out this work, we have made direct field measurements, combined with microstructures, and combined all this with data from geochemical rock analysis of the basalts that are the main host formations. Geochemical data show that tholeitic basalts formed from a mantle plume that was emplaced in an oceanic plateau context. Calc-alkaline basalts and andesites are comparable to Paleoproterozoic tholeitic basalts (PTH3), which are slightly enriched in light rare earths. Fertility tests show that these basalts concentrate between 3 and 6 ppb of gold at the time of accretion, which is sufficient for remobilization of this primary gold during the Eburnian orogeny to yield a deposit of around 4 - 5 Moz. Gold mineralization is associated with pyrite crystals when the latter are disseminated in the rock mass, whereas it is associated with hematite in quartz veins concordant with S1 shear deformation. It is mainly the pyrite crystals in the pressure shadows that contain the gold grains, whose development would be synchronous with micro-shear zone reactivation during the first phase of D1B deformation. The second phase of D2B deformation, which is a crenulation or fracture schistosity, does not significantly affect the shear deformation that controls mineralization.

Assessing the Impact of Gold Mining on the Quality of Water Resources in the Commune of Meguet, Burkina Faso

Despite its often illegal nature, artisanal gold mining in Burkina Faso contributes to the economic and social development of the country. However, the rudimentary techniques used in gold panning have a significant impact on the environment due to inappropriate practices and the use of various chemical substances. This study aims to assess the impact of artisanal gold mining on the quality of water resources in a rural community at Méguet, Burkina Faso. To this end, surface and groundwater samples were collected and analyzed at the BUMIGEB laboratory. Field results show that the waters are slightly alkaline (6.97 < pH < 8.1), weakly mineralized and conductive (124 < EC < 543 μS/cm), with temperatures ranging from 24.6˚C to 31.6˚C. In addition, trace metals (TMEs) analyzed from surface and subsurface waters show very high levels, generally deviating from the levels recommended by WHO guidelines for Burkina Faso. Trace metals contamination of water resources in the commune of Méguet is mainly due to Fe (3.78 - 11.12 mg/kg), Hg (0.03 - 0.29 mg/kg), As (0.01- 6.31 mg/kg) and Pb (0.01 - 3.8 mg/kg). This study can serve as a basis for guiding national environmental policies to protect the water resources of the Méguet mine.

Discovery of scheelite in the Zaozigou gold deposit of West Qinling Orogen,Northwest China and its implications for ore genesis

1.Objective The West Qinling Orogen extends east-west over 1500 km and is endowed with dozens of large-super large scale gold deposits.The Zaozigou gold deposit has a proven reserve of 134 t with an average grade of 3.08 g/t thus is one of the largest deposits in the West Qinling Orogen.However,whether the fluid type is metamorphic or magmatichydrothermal and ore-formation processes of the Zaozigou gold deposit are equivocal.Scheelite is a ubiquitous accessory mineral in geologically diverse ore-deposit types and attested to be a strong indicator of ore-forming conditions and oredeposit genesis.

Origin of the Yueguang gold deposit in Xinhua, Hunan Province, South China: insights from fl uid inclusion and hydrogen–oxygen stable isotope analysis

The Yueguang gold deposit is located in Fengjia,Xinhua County,Hunan Province,South China.It represents a recently discovered small-scale gold deposit situated in the southwestern region of the Jiangnan Orogenic Belt,west of the Baimashan granitic batholith.In order to discern the characteristics of the ore-formingfluids,the underlying mineralization processes,and establish a foundation for the origin of the Yueguang gold depositfluid inclusion micro-thermometry,as well as quartz hydrogen and oxygen isotope analysis,have been carried out on samples obtained from various stages of mineralization.The hydrothermal miner-alization stages within the Yueguang gold deposit can be categorized into three stages:(i)the barren,pre-ore quartz-pyrite stage(Stage Ⅰ),the quartz-pyrite-gold stage(Stage Ⅱ),and the post-ore quartz-carbonate stage(Stage Ⅲ),with the second stage being the main mineralization stage.Thefluid inclusions identified in samples from the main min-eralization stage can predominantly be described with the NaCl–H_(2)O and CO_(2)–NaCl–H_(2)O systems.These inclusions display homogenization temperatures ranging from 158.8 to 334.9℃,and thefluid salinity ranges from 0.3%to 4.0%(wt.%NaCl equiv.).Laser Raman spectroscopy analysis of individual inclusions further reveals the presence of gas-phases such as CO_(2),CH_(4),and N_(2).Isotopic analysis indicatesδ^(18)Ofluid values ranging from 3.95 to 6.7‰ and δDH_(2)O values ranging from-71.9 to-55.7‰.These results indi-cate that the ore-formingfluid of the Yueguang gold deposit belongs to metamorphic hydrothermalfluids of middle-low temperature and low salinity.In the process of ore formation,gold is transported in the form of Au(HS)2-complexes,with gold deposition being driven byfluid immiscibility.Therefore,the Yueguang gold deposit is categorized as an orogenic gold deposit dominated by metamorphic hydrother-malfluid.It may become a new target for gold exploration in the Baimashan region,central Hunan Province.

Structural Pattern Related to Gold Mineralization in the Essakane Area (Northern Burkina Faso, West African Craton)

The finite deformation structures recorded in the Essakane area, located in the northeast corner of Burkina Faso, highlight three major compressive deformation phases, successively named D1, D2, and D3. The D1 event phase, trending NE-SW, is characterised by P1 folds and S1 axial plane schistosity. The D2 phase trending NW-SE is characterised by folds P2, schistosity (S2) and shear (C) planes. And the D3 phase trending NNE-SSW to N-S is characterised by P3 folds, crenulation microfolds and S3 spaced schistosity. It has also been noted that gold mineralizations are mainly hosted in quartz, carbonate, pyrite, and arsenopyrite veins. Structural interpretation indicates that these veins are organized into lenticular bodies that were formed during the first two deformation phases (D1 and D2). This suggests a strong structural control typical of orogenic gold concentrations.

Fast synthesis of gold nanoparticles by cold atmospheric pressure plasma jet in the presence of Au^(+) ions and a capping agent

Homogeneous gold nanoparticles were synthesized under atmospheric pressure using a nonthermal helium plasma jet in a single-step process.A current power supply was used to generate the plasma discharge rich in diverse reactive species.These species induce rapid chemical reactions responsible for the reduction of the gold salts upon contact with the liquid solution.In this study,spherical and monodispersed gold nanoparticles were obtained within 5 min of plasma exposure using a solution containing gold(Ⅲ)chloride hydrate(HAuCl_(4))as a precursor and polyvinylpyrrolidone(PVP)as a capping agent to inhibit agglomerations.The formation of these metal nanoparticles was initially perceptible through a visible change in the sample's color,transitioning from light yellow to a red/pink color.This was subsequently corroborated by UVvis spectroscopy,which revealed an optical absorption in the 520-550 nm range for Au NPs,corresponding to the surface plasmon resonance(SPR)band.An investigation into the impact of various parameters,including plasma discharge duration,precursor and capping agent concentrations,was carried out to optimize conditions for the formation of well-separated,spherical gold nanoparticles.Dynamic light scattering(DLS)was used to measure the size of these nanoparticles,transmission electron microscopy(TEM)was used to observe their morphology and X-ray diffraction(XRD)was also employed to determine their crystallographic structure.The results confirm that homogeneous spherical gold nanoparticles with an average diameter of 13 nm can be easily synthesized through a rapid,straightforward,and environmentally friendly approach utilizing a helium atmospheric pressure plasma.

Multi-Scale Approach for Gold Targeting in Côte d’Ivoire Paleoproterozoic Rocks

The aim of this study is to contribute to better targeting of gold prospecting areas using geospatial information. To this end, 3 mining sites were selected for the study. They are: the Sénoufo belt (Barrick Gold mine), the Yaouré complex (Perseus Mining mine) and the South Fetêkro belt (Bonikro, Hiré and Agbaou mines). For this study, a multi-scale approach was carried out at regional, mine and microscopic levels. At the regional scale, a comparative analysis of 1:200,000 scale geological maps revealed that 3 main lithologies are regularly repeated on and around the various mining sites. These are: undifferentiated volcanics, metagranodiorites and metasiltites dominated by meta-arenites. Most of these lithologies are affected by undifferentiated faults generally oriented NE-SW, N-S, ENE-WSW and WNW-ESE. In addition, gold and manganese occurrences are present on all the sites studied. At the mine scale, radarsat-1 images processing indicate that the main mining sites are generally located near or at the intersection of lineaments-oriented NE-SW or N-S on the one hand and E-W or ENE-WSW or WNW-ESE or again NW-SE on the other. These mines are also located at the interface between zones of high and low lineament density. At the microscopic scale, petrographic studies of undifferentiated volcanic samples from the various sites indicate that they consist of andesites, meta-andesites and tuffs.

Tamping the movement of the laser absorption cutoff position using gold foam hohlraum

In indirect-driven laser fusion experiments,the movement of the laser absorption layer will distort the radiation uniformity on the capsule.The gold foam has advantages in symmetry control and lowering wall plasma blowoff when used in an inertial confinement fusion(ICF)hohlraum.This work investigates the motion of the laser absorption cutoff position using lowdensity foam gold walls.It is found that the motion of the laser absorption cutoff position can be significantly mitigated through optimal initial low density,tailored to a specific laser shape.For a short square laser pulse,the laser absorption cutoff position remains almost stationary at an initial density of approximately 0.6 g cm^(-3).For a long-shaped laser pulse,the minimal motion of the laser absorption cutoff position is observed at an initial density of about 0.1 g cm^(-3).This approach allows for the adjustment of the symmetry of the hohlraum radiation source.The insights gained from this study serve as a crucial reference for optimizing the hohlraum wall density.

Land Use and Land Cover Dynamics in the Eseka Alluvial Gold Mining District, Centre Region, Cameroon

Local populations in Cameroon thrive on forest resources and the flow of ecosystem services they provide are pivotal in sustaining national economy, improving people’s lives, safeguarding biodiversity, and mitigating the impacts of environmental changes. The exploitation of these resources invariably leads to deforestation and forest degradation. This study was designed to evaluate land use land cover change (LULCC) in the Eseka alluvial gold mining district with the aid of Landsat images. In the investigation of forest cover change, four Landsat satellite images for (1990, 2002, 2015 and 2022) were used. Ground-truthing also helped to identify the activities carried out by the local population and to determine agents, drivers and pressures of land use and land cover change. Four main land cover classes namely: forest, agricultural land, settlement/mining camps and water bodies were selected. Between 1990 and 2022, the proportion of forest decreased from 98% to 34% while those of agricultural land and settlement/mining camps increased from 2% to 60% and 0.54% to 6% respectively. Analysis showed ongoing deforestation with forest cover loss of ~98,263 ha in 32 years giving a cover change percentage of 63.94%. Kappa coefficient for the study period ranged from 0.92 to 0.99. Forest cover loss could be attributed to farming activities, wood extraction and alluvial gold mining activities. Economic motives notably the need to increase household income from a frequent demand for farm and wood products in neighbouring towns and the quest for gold were the main drivers of these activities. Hence, this study assesses the impact of human activities from the mining sector on the forest ecosystem in a bid to inform mitigation policies.

Industrial utilization of arsenic-containing gold dressing tailings as pellet prepared by straight grate process

The utilization of arsenic-containing gold dressing tailings is an urgent issue faced by gold production companies worldwide.The thermodynamic analysis results indicate that ferrous arsenate(FeAsO_(4)),pyrite(FeS_(2))and sodium cyanide(NaCN)in the arsenic-containing gold metallurgical tailings can be effectively removed using straight grate process,and the removal of pyrite and sodium cyanide is basically completed during the preheating stage,while the removal of ferrous arsenate requires the roasting stage.The pellets undergo a transformation from magnetite to hematite during the preheating process,and are solidified through micro-crystalline bonding and high-temperature recrystallization of hematite(Fe_(2)O_(3))during the roasting process.Ultimately,pellets with removal rates of 80.77% for arsenic,88.78% for sulfur,and 99.88% for cyanide are obtained,as well as the iron content is 61.1% and the compressive strength is 3071 N,meeting the requirements for blast furnace burden.This study provides an industrially feasible method for treating arsenic-containing gold smelting tailings,benefiting gold production enterprises.

Biological Interaction and Imaging of Ultrasmall Gold Nanoparticles

Ultrasmall gold nanoparticles(AuNPs)typically includes atomically precise gold nanoclusters(AuNCs)and AuNPs with a core size below 3 nm.Serving as a bridge between small molecules and traditional inorganic nanoparticles,the ultrasmall AuNPs show the unique advantages of both small molecules(e.g.,rapid distribution,renal clearance,low non-specific organ accumulation)and nanoparticles(e.g.,long blood circulation and enhanced permeability and retention effect).The emergence of ultrasmall AuNPs creates significant opportunities to address many challenges in the health field including disease diagnosis,monitoring and treatment.Since the nano–bio interaction dictates the overall biological applications of the ultrasmall AuNPs,this review elucidates the recent advances in the biological interactions and imaging of ultrasmall AuNPs.We begin with the introduction of the factors that influence the cellular interactions of ultrasmall AuNPs.We then discuss the organ interactions,especially focus on the interactions of the liver and kidneys.We further present the recent advances in the tumor interactions of ultrasmall AuNPs.In addition,the imaging performance of the ultrasmall AuNPs is summarized and discussed.Finally,we summarize this review and provide some perspective on the future research direction of the ultrasmall AuNPs,aiming to accelerate their clinical translation.

Geology and Geochemistry of K-feldspar Veins in Lamprophyre at the Zhenyuan Gold Deposit,Yunnan,Southwest China:Implications for Gold Mineralization

Lamprophyres typically appear in hydrothermal gold deposits.The relationship between lamprophyres and gold deposits is investigated widely.Some researchers suggest that the emplacement of lamprophyres triggers gold mineralization,whereas others hypothesize that the formation of lamprophyres increases the fertility of mantle sources and ore-forming fluids.K-feldspar veins,with ages between those of lamprophyres and gold deposits,appear in lamprophyres in Zhenyuan.Therefore,K-feldspar veins are ideal for investigating the relationship between lamprophyres and gold deposits.Phlogopite in K-feldspar veins has lower Mg#,Ni,and Cr contents and higher TiO2,Li,Ba,Sr,Sc,Zr,Nb,and Cs contents than phlogopite in lamprophyres.The in-situ Sr isotopic values of apatites(0.7063–0.7066)in K-feldspar veins are within the range for apatites(0.7064–0.7078)from lamprophyres.High large-ion lithophile element concentrations and low Nb and Ta concentrations in phlogopite from lamprophyres,in addition to high(87Sr/86Sr)i values of apatite(0.7064–0.7078),indicate that the magma parental to these phlogopite and apatite crystals is derived from an enriched mantle.Kfeldspar veins are genetically correlated with lamprophyres,whereas sulfide mineral assemblage and trace element compositions of pyrite in K-feldspar veins suggest that K-feldspar veins in lamprophyres are not directly related to gold mineralization of the Zhenyuan deposit.

Genesis of the Jianbeigou Gold Deposit on the Southern Margin of the North China Craton: Insights from Fluid Inclusions, H-O-S Isotopes, and Pyrite in situ Trace Element Analyses

The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, including the quartz ± pyrite, quartz-polymetallic sulfide, and quartz-carbonate ± pyrite stages. From the early to late stages, the homogenization temperatures of primary fluid inclusions are 281–362°C, 227–331°C, and 149–261°C, respectively. The corresponding salinities estimated for these fluids are 3.9–9.9 wt%, 0.4–9.4 wt%, and 0.7–7.2 wt% Na Cl equiv. Combined with laser Raman spectroscopy data, the ore-forming fluid belongs to a H_(2)O-CO_(2)-Na Cl ± CH_4 system with medium–low temperature and salinity. The δ~(18)Ofluid and δD values for the quartz veins are-1.0‰ to 6.0‰ and-105‰ to-84‰, respectively, which indicates that the ore-forming fluid is of mixed source, mainly derived from magma, with a contribution from meteoric water. Pyrite has been identified into three generations based on mineral paragenetic sequencing, including Py1, Py2, and Py3. The pyrites have δ~(34)S sulfur isotopic compositions from three stages between 3.7‰ and 8.4‰, indicating that sulfur mainly originated from magma. Te, Bi, Sb, and Cu contents in pyrite were all high and showed a strong correlation with Au concentrations. Native gold and the Au-Ag-Bi telluride minerals were formed concurrently, and the As concentration was low and decoupled from the Au content. Therefore, Te, Bi, Sb and other low-melting point chalcophile elements play an important role for gold mineralization in arsenic-deficient ore-forming fluid. Combined with the geological setting, evolution of pyrite, and ore-fluids geochemistry, we propose that the Jianbeigou deposit can be classified as a magmatic–hydrothermal lode gold deposit. Gold mineralization on the southern margin of the North China Craton is related to Early Cretaceous magmatism and formed in an extensional setting.

Enhancing Geological Understanding and Identifying Gold Anomalies in the Ailaoshan Orogen

The Ailaoshan Orogen in the southeastern Tibet Plateau,situated between the Yangtze and Simao blocks,underwent a complex structural,magmatic,and metamorphic evolution resulting in different tectonic subzones with varying structural lineaments and elemental concentrations.These elements can conceal or reduce anomalies due to the mutual effect between different anomaly areas.Dividing the whole zone into subzones based on tectonic settings,ore cluster areas,or sample catchment basins(Scb),geochemical and structural anomalies associated with gold(Au)mineralization have been identified utilizing mean plus twice standard deviations(Mean+2STD),factor analysis(FA),concentration-area(CA)modeling of stream sediment geochemical data,and lineament density in both the Ailaoshan Orogen and the individual subzones.The FA in the divided 98 Scbs with 6 Scbs containing Au deposits can roughly ascertain unknown rock types,identify specific element associations of known rocks and discern the porphyry or skarn-type Au mineralization.Compared with methods of Mean+2STD and C-A model of data in the whole orogen,which mistake the anomalies as background or act the background as anomalies,the combined methods of FA and C-A in the separate subzones or Scbs works well in regional metallogenic potential analysis.Mapping of lineament densities with a 10-km circle diameter is not suitable to locate Au deposits because of the delineated large areas of medium-high lineament density.In contrast,the use of circle diameters of 1.3 km or 1.7 km in the ore cluster scale delineates areas with a higher concentration of lineament density,consistent with the locations of known Au deposits.By analyzing the map of faults and Au anomalies,two potential prospecting targets,Scbs 1 and 63 with a sandstone as a potential host rock for Au,have been identified in the Ailaoshan Orogen.The use of combined methods in the divided subzones proved to be more effective in improving geological understanding and identifying mineralization anomalies associated with Au,rather than analyzing the entire large area.

Adsorption behaviors and mechanisms of gold recovery from thiosulfate solution by ion exchange resin

The adsorption behaviors and mechanisms of gold from thiosulfate solution on strong-base anion exchange resin were systematically investigated.The comparison experiment of adsorption ability and selectivity for gold showed that gel Amberlite IRA-400 resin with Type Ⅰ quaternary ammonium functional group had better adsorption performance.The increases of resin dosage,ammonia concentration and solution pH were favorable to gold adsorption,whereas the rises of cupric and thiosulfate concentrations were disadvantageous to gold loading.Microscopic characterization results indicated that gold was adsorbed in the form of [Au(S_(2)O_(3))_(2)]^(3–) complex anion by exchanging with the counter ion Cl^(–) in the functional group of the resin.Density functional theory calculation result manifested that gold adsorption was mainly depended on the hydrogen bond and van der Waals force generated between O atom in [Au(S_(2)O_(3))_(2)]^(3–) and H atom in the quaternary ammonium functional group of the resin.

Lithostructural Control of the Gold Mineralization of the Douta Permit of African Star Resources (Kédougou-Kéniéba Inlier, Southeastern Senegal)

The Douta permit of African Star Resources/Thor Explorations, located in the southeast of Senegal, in the Kédougou-Kéniéba Inlier (western part of the West African Craton), is dominated to the East by metasedimentary formations such as greywackes, shales, graphitic shales, quartzites, cherts, claystones and breccias characteristic of the Dialé-Daléma basin. To the West, the mafic formations of the Mako volcanic belt are the most common. Metasedimentary rocks are associated with metavolcanosedimentary terms found at the contact zones between the two (2) Birimian groups. These different geological formations are cut by mafic dolerite and gabbro sills and/or dykes, as well as quartz and microgranite veins. The Douta gold project is crossed from North to South by the MTZ (Main Transcurrent Zone), generally oriented NE-SW and becoming N-S towards the North. The permit is characterized by several shear corridors. The rocks are affected by brittle, brittle-ductile to ductile deformations. The gold mineralization is hosted by a NE-trending shear corridor called the Makosa corridor (Makosa shear zone), therefore sub-parallel to the MTZ. It has a subvertical dip (75˚ to 85˚ to the NW). It is associated with a hydrothermal phase characterized by quartz-sericite-epidote-fine, disseminated pyrite and arsenopyrite ± albite ± chlorite paragenesis. These minerals testify to the existence of a low degree of metamorphism (greenschist facies, epizonal domain) in the area. However, metamorphism reaches amphibolite facies in some places, particularly in the vicinity of intrusive bodies, with the presence of hornblende (amphiboles) and plagioclase. The gold mineralization is mainly hosted by two (2) metasedimentary lithological units: meta-greywackes and shales.

The Geology, Fluid Inclusions, and O-S Isotopes of the Mibei Gold Deposit, Hunan Province, Southern China

The Mibei gold deposit,located in the southwestern part of the Xuefengshan uplift zone,the middle section of the Jiangnan orogenic belt in southern China,has estimated gold resources of approximately seven tons.This deposit is primarily a quartz vein-type gold deposit,with ore bodies occurring mainly within Neoproterozoic metasediments.The main metallic minerals in the ore are pyrite,chalcopyrite,and arsenopyrite.In this study,the petrography and microthermometry of ore-forming fluid inclusions,oxygen isotopes of gold-bearing quartz,and sulfur isotopes of goldbearing sulfides and arsenopyrite were analyzed.Three types of fluid inclusions were identified:type Ⅰa three-phase inclusions comprising vapor and two phases of liquids(V_(CO_(2))+L_(CO_(2))+L_(H2O)),type Ⅰb two-phase liquids(L_(CO_(2))+L_(H2O)),typeⅡ two-phase vapor-rich inclusions(V/V+L> 50%),and type Ⅲ pure liquid inclusions.Type Ⅰ inclusions were heated uniformly to the liquid phase,type Ⅱ inclusions were heated uniformly to the gas phase,and type Ⅲ inclusions were heated without change.In general,the temperature range of homogenization to liquid phase of fluid inclusions in the Mibei gold deposit is 204-227℃.The salinity of the inclusion ranges from 4.6 to 12.2 wt% NaCl equiv.The δ~(18)O_(SMOW) of gold-bearing quartz varies from 16.9‰ to 17.5‰.The δ~(18)O_(H2O) of gold-bearing quartz are varied from 6.5‰ to 7.5‰.The δ~(34)S values of gold-bearing pyrite range from 1.7‰ to 6.8‰.The δ~(34)S values of gold-bearing arsenopy rite range from 5.6%o to 5.9‰.Theδ~(34)S values of pyrite from wall rocks slate range from 6.4‰ to 11.6‰.This evidence implies that the ore-forming fluids of the Mibei gold deposit originated from magmatic-hydrothermal processes,mixing with minor S from the surrounding metasediments.Combined with the evolution of the Jiangnan orogenic belt,due to the magmatic and tectonic activities of the Xuefengshan uplift during the Caledonian period,the fault seal mechanism controlled the ore-forming process.Overall,the Mibei gold deposit is more akin to a magmatic-hydrothermal gold deposit.

Source of metals related to gold occurrences in Cameroon, Central African Belt

Suites of granitic and metamorphic rocks form a perfect geological environment in which to investigate the source of metals related to gold deposits.In the East Province of Cameroon,the source of metals-related gold(grade~4.6 g/t)that occurs within metamorphic and granitic rocks remains ambiguous.The host rocks were subjected to XRF and ICP-MS whole-rock geochemistry and BSE/EDS mineral analyses to investigate the source(s)of metals related to gold in the Province.Petrographically,chalcopyrite-pyrite and magnetite-ilmenite are the main sulfi des and oxides of granites,respectively.The low-grade metamorphic rocks are sulfi de-rich consisting of arsenopyrite,chalcopyrite,pyrite,and sphalerite,and oxides include magnetite,ilmenite,hematite,and rutile.Cu,Ni,Co,Sb,Sc,and Zn concentrations depleted in high-grade metamorphic rocks and granites compared to low-grade metamorphic rocks.As well,Bi,Cd,Co,Cu,Ni,Sb,V,W,and Zn concentrations decrease with increasing temperatures from low-grade rocks to high-grade rocks and granites.The suite of depleted elements in high-grade rocks and granites is almost identical to those enriched in gold occurrences.We conclude that metals(Bi,Cd,Co,Cu,Ni,Sb,and Zn)related to gold mineralization in the East Province of Cameroon likely originated from metal-rich low-grade metamorphic rocks during prograde metamorphic processes prior to partial melting.

Applicability of Gravity Separation Method on the Ashashire Gold Ore Deposit from Benishangul Gumuz Region, Western Ethiopia

The study was conducted to determine the applicability of gravity separation method on the Ashashire gold ore deposit Benishangul gumuz region, western Ethiopia. The Ashashire composite was produced to provide sufficient mass for this study and experiment, including sample preparation, mineralogical analysis of gold and associated elements, gravity concentration, and data interpretation and analysis. During the study, a grind optimization was conducted on the composites sample with varying grind size to evaluate the effect of grind size on gold recovery. The ore was moderately ground to the standard grind size of 80%, passing 106 µm, 75 µm, 53 µm and this nominal size was selected for the preliminary assessment for concentration optimization for this deposit. The gravity testing comprised three-stage concentration using Knelson concentrator. High recovery of gold from the gravity concentrates was achieved from the second gravity concentration. Based on the laboratory experimental result analysis, a grind size of P80 75 µm is selected as optimal size for the Ashashire gold deposit. Increasing the grind size from P80 of 75 µm to 106 µm decreases the recovery rate from 75% to 54%, or decreasing the grind size from P80 of 75 µm to 53 µm decreases the gold recovery rate to 37%. The native gold grain in the ores is mostly associated with quartz and fine gold is closely associated with pyrite. According to analysis of the fire assay, chemical, and mineralogical data, only gold and telluride is commercially valuable elements in the ores. Predominantly gold was occurred in the native form of Au-Te. The sample subjected to gravity separation assayed about 2.6 g/t Au.