Comparative study of functional optical zone:small incision lenticule extraction versus femtosecond laser assisted excimer laser keratomileusis

AIM:To investigate the size of functional optical zone(FOZ)after small incision lenticule extraction(SMILE)versus femtosecond laser assisted excimer laser keratomileusis(FS-LASIK)for myopia correction and potential associated factors for FOZ.METHODS:A total of 133 patients who received corneal refractive surgery in our hospital between November 2018 and July 2021 were retrospectively enrolled.There were 63 patients(123 eyes)in SMILE group and 70patients(139 eyes)in FS-LASIK group.The size of FOZ was measured using Pentacam 3-dementional anterior segment analyzer before and 3mo after surgery,so as to analyze postoperative achieved functional optical zone(AFOZ)and its contributing parameters.RESULTS:When planned functional optical zone(PFOZ)was 6.5 mm for both groups,AFOZ was 1.45±0.27 and 1.67±0.25 mm smaller than preoperative FOZ in SMILE group and FS-LASIK group 3mo after surgery.AFOZ in SMILE group was significantly larger than that in FS-LASIK group(P<0.001).Variation of FOZ was negatively correlated with preoperative spherical equivalent(SE)and positively correlated with variation of mean keratometry value(△Km),variation of spherical aberration(△SA),and variation of Q-value(△Q,all P<0.001)in both groups.Multiple variable linear regression equations were△FOZ=1.354-0.1×pre-SE+0.336×△Q+1.462×△SA in SMILE group and△FOZ=1.512+0.137×△Q+0.468×△SA in FS-LASIK group.CONCLUSION:AFOZ is significantly smaller than preoperative FOZ in both SMILE and FS-LASIK groups.With the same PFOZ,larger AFOZ is achieved in SMILE group than in FS-LASIK group.

Effect of Process Parameters of Microwave Assisted Extraction (MAE) on Polysaccharides Yield from Pumpkin

Process parameters of microwave assisted extraction (MAE) of the polysaccharides from pumpkin viz. extraction temperature, time and liquid-solid ratio were studied by using single factor and response surface methodology method. The results showed that the liquid-solid ratio was the most important factor in polysaccharides yield, followed by extraction time, and the extraction temperature was the least important factor. The optimum microwave assisted extraction conditions for the highest polysaccharides yield from pumpkin (16.76%±0.38%) were obtained by using the response surface methodology with extraction time of 29 min, an extraction temperature of 79℃ and a liquid-solid ratio of 22 mL · g-1. Validation experiment result well agreed with predicted value.

Salting-Out Assisted Liquid-Liquid Extraction Combined with HPLC for Quantitative Extraction of Trace Multiclass Pesticide Residues from Environmental Waters

In this study, salting-out assisted liquid-liquid extraction combined with high performance liquid chromatography diode array detector (SALLE-HPLC-DAD) method was developed and validated for simultaneous analysis of carbaryl, atrazine, propazine, chlorothalonil, dimethametryn and terbutryn in environmental water samples. Parameters affecting the extraction efficiency such as type and volume of extraction solvent, sample volume, salt type and amount, centrifugation speed and time, and sample pH were optimized. Under the optimum extraction conditions the method was linear over the range of 10 - 100 μg/L (carbaryl), 8 - 100 μg/L (atarzine), 7 - 100 μg/L (propazine) and 9 - 100 μg/L (chlorothalonil, terbutryn and dimethametryn) with correlation coefficients (R2) between 0.99 and 0.999. Limits of detection and quantification ranged from 2.0 to 2.8 μg/L and 6.7 to 9.5 μg/L, respectively. The extraction recoveries obtained for ground, lake and river waters were in a range of 75.5% to 106.6%, with the intra-day and inter-day relative standard deviation lower than 3.4% for all the target analytes. All of the target analytes were not detected in these samples. Therefore, the proposed SALLE-HPLC-DAD method is simple, rapid, cheap and environmentally friendly for the determination of the aforementioned herbicides, insecticide and fungicide residues in environmental water samples.

MICROWAVE-ASSISTED EXTRACTION OF GLYCYRRHIZIC ACID FROM LICORICE ROOT-EFFECT OF THE PROPERTY OF SOLUTION ON EXTRACTION OF GA

The property of extraction solution is an important factor influencing the extraction efficiency. In the present work, the effect of the property of solution on extraction of GA was studied, which including the concentration of ethanol, ammonia and cation (M+), pH of extraction solution, different kinds of organic solvent etc. The results show that 50%-60%(v/v) ethanol can reach high percentage extraction of GA. If 1% (v/v) ammonia solution was added into 60%(v/v) ethanol, the percentage extraction can be increased from 2.0% to 2.31%. Without ammonia, 50mmol/L [M+] (M+ = K+, NH4+) was added into 60%(v/v) ethanol, percentage extraction of GA can reach about 2.26%. If pH of solution (60% ethanol) was adjust to pH=4.0, it can reach high percentage extraction. If pH of solution (60% ethanol + 50mmol [M+], pH=6.1) was adjust tO PH=4.0, especially M+ is K+ or NH4+, it can reach almost same extraction efficiency as that of 1% ammonia solution + 60% ethanol, and the operation environment can be greatly improved.

Microwave-assisted extraction of polysaccharides from solanum nigrum

The microwave-assisted method was used to extract polysaccharides from solanum nigrum. The optimum experimental parameters, mechanism of the extraction and the effect of microwave-assisted extraction process on the structures of polysaccharides were investigated. The extract was analyzed by the modified phenol-sulfuric acid method at 490nm. The optimum experimental parameters were obtained by orthogonal experiments as follows: extraction time 15min, microwave radiation power 455W and the process ratio of materials mass to solvent volume 1∶20. The results show that compared with the conventional reflux extraction, the microwave-assisted extraction has a higher yield in shorter time, with no effect on the finally obtained polysaccharides as seen from the FT-IR spectra. The scanning electron microscopy images reveal that the mechanism of the extraction is related to the structural changes of the plant cells in different extracting conditions.

Microwave-assisted Extraction of Isoflavones from Belamcanda chinensis

Microwave-assisted extraction (MAE) of isoflavones from Beiamcanda chinensis was studied using ethanol as the solvent. The single factor experiment and the orthogonal method were used to optimize the MAE condition. It was concluded that two doses of intermittent microwave power radiation, 300 W each for 4 min, were needed for extraction. The mass ratio of solvent to material was 8:1 and the alcohol mass fraction was 80%. The extracted liquor was then concentrated under vacuum and degreased with petroleum ether. The yield of total isoflavones was about 8.8% and the contents of tectoridin and iridin were 67.6% and 16.3% respectively. Compared with direct-heating extraction (DHE), MAE may shorten extracting duration, reduce solvent consumption, and improve yield and purity of isoflavones from Belamcanda chinensis.

Microwave-assisted Extraction of Rutin and Quercetin from Flos Sophorae

Three microwave-assisted extraction(MAE) procedures were studied. The first procedure was household microwave oven dynamic extraction(HMODE). The second procedure was special microwave oven bath extraction(SMOBE). The third procedure was microwave resonant cavity dynamic extraction(MRCDE). The results obtained by the three microwave-assisted extraction procedures were compared with those obtained by using traditional Soxhlet extraction. The results indicate that the MAE not only took a shorter time, but also simplified the procedure, and made the extraction a higher yield. At the same time the results obtained by the three MAE procedures were also compared with each other.

Microwave-assisted Extraction of Effective Compounds from Traditional Chinese Herbal Medicine Ciwujia

Microwave-assisted extraction (MAE) fro active ingredients in Ciweujia was studied by using ethanol as the extractant.Comparing MAE with conventional methods,the former can save the extracting time and increase the content of the active ingredients in product,As to the operation in MAE ,the continuous radiation process is more convenient for the extraction for traditional Chinese medicine than the intermittent radiation process,Optimized by uniform design,MAE was proved to be an effective and novel process for extracting active ingredients in Ciwujia,The optimized MAE conditions are as follows:the microwave power is 510W,the radiation time 30 min the alohol concentration at 80%,the ratio of solvent to soild material being 5:1,the soaking time 0.5h ,and the herbal particle size is (520±19)μm.

Optimization of ultrasound-assisted extraction of camptothecin from Camptotheca acuminata seeds

Naturally occurring camptothecin(CPT) is an important source of chemotherapeutic agents.The extraction from Camptotheca acuminata is still the main approach to obtain CPT compared with total synthesis.In the present study,ultrasound-assisted extractions(UAE) of CPT from C.acuminata seeds with alkaline solutions were investigated and CPT yield were determined by High Performance Liquid Chromatography.The conditions of alkaline species and concentrations,extraction time,extraction temperature and ultrasonic power were optimized.Results show that both Na3PO4 and Na2CO3 solutions gain good extraction yields,whereas Na3PO4 solution has stronger basicity and need higher concentration than Na2CO3 solution does,thus aqueous Na2CO3 is more beneficial for the extraction.The optimal condition was ultrasonically extracted with 0.5% aqueous Na2CO3 at 50°C and ultrasonic power of 400 W for 60 min.Comparing with UAE with ethanol,the extraction with 0.5% Na2CO3 solution achieves higher yield.Moreover,aqueous Na2CO3 as a solvent has various advantages including non-toxicity,inflammable,non-corrosive and low cost,which ensure this UAE method is a superior method with high utilizing prospect.

Optimization of Ultrasonic-Assisted Extraction Process of Polysaccharides from American Ginseng and Evaluation of Its Immunostimulating Activity

Ultrasonic-assisted extraction(UAE) of American ginseng polysaccharides(AGP) was investigated using response surface methodology. Three-factor-three-level Box-Behnken design was employed to optimize the ultrasonic power, extraction time and ratio of water to raw material to obtain a high AGP yield. The analysis of variance and response surface plots indicated that ultrasonic power was the most important factor affecting the extraction yield. The optimal conditions were ultrasonic power 400 W, extraction time 71 min, and ratio of water to raw material 33 m L g-1. Under these conditions, the yield of AGP was 8.09%, which was agreed closely to the predicted value. Gas chromatography(GC) analysis showed that AGP was composed of arabinose, rhamnose, galactose, glucose, and galacturonic acid. Fourier transform infrared spectra revealed the general characteristic absorption peaks of AGP. In addition, AGP exhibited good immunostimulating activities by up-regulating the production of nitric oxide and cytokines. Compared with hot water extraction, UAE required shorter extraction time and gave a higher extraction yield, without changing the structure and immunostimulating activity of AGP. The results indicated that UAE could be an effective and advisable technique for the large scale production of plant polysaccharides.

Antioxidant and hepatoprotective effects of Ajuga nipponensis extract by ultrasonic-assisted extraction

Objective: To investigate suitable condition for extraction of the active components from Ajuga nipponensis(A. nipponensis). Methods: Orthogonal experimental design was used to determine the optimal extraction parameters for ecdysterones and flavonoids. Finally, the hepatoprotective abilities of A. nipponensis extracts were evaluated by CCl_4-induced animal models. Results:Maximum yields of flavonoids(7.87±0.10) mg/g and ecdysterones(0.73±0.02) mg/g could be obtained when the extraction time was 50 min, the extraction temperature was 60 ℃, and the ratio of sample to 70%(v/v) ethanol was 1:20(w/w). The antioxidant property of A. nipponensis was correlated to the concentration of its extracts. At 5 mg/m L, A. nipponensisextract scavenged 84.8% of DPPH radical and had absorbance values of 2.43±0.04 reducing power. Upon CCl_4-induced liver injury, glutamic oxaloacetic transaminase and glutamic pyruvic transaminase decreased significantly after the mice were treated with A. nipponensis. Histological researches also explained that A. nipponensis reduced the extent of liver lesions induced by CCl_4. Conclusions: A. nipponensis exhibited potent antioxidant activity in chemical experimental models and hepatoprotective effect against CCl_4-induced liver damage.

Optimization of microwave-assisted extraction of bioactive alkaloids from lotus plumule using response surface methodology

In this work,a fast and efficient microwave-assisted extraction(MAE) method was developed to extract main bioactive alkaloids from lotus plumue.To optimize MAE conditions,three main factors were selected using univariate approach experiments,and then central composite design(CCD).The optimal extraction conditions were as follows:methanol concentration of 65%,microwave power of 200 W,and extraction time of 260 s.A high performance liquid chromatography–diode array detector(HPLC–DAD) method was established to quantitatively analyze these phytochemicals in different lotus plumule samples and in different part of lotus.Chromatographic separation was carried out on an Agilent Zorbax Extend-C_(18) column(4.6 mm×150 mm,3.5 μm).Gradient elution was applied with the mobile phase constituted with 0.1% triethylamine in water(A)and acetonitrile(B):40%-70% B at 0-8 min,70%-100% B at 8–9 min,100% B for 2 min,and then equilibrated with 40% B for 2 min.

Microwave-assisted solvent extraction of castor oil from castor seeds

This study was aimed at evaluating the physicochemical properties and oxidation stability of castor oil using microwave-assisted solvent extraction(MAE). MAE was performed using 5% ethanol in hexane as solvent at different extraction times, power intensities and solvent-to-feed(S/F, ml of solvent to gram of feed) ratios.The process parameters were optimized by statistical approach using historical data design of response surface method(RSM). The oils were characterized for yield, physicochemical properties, dielectric properties and oxidation stability, and comparison was also made with oil extracted using Soxhlet method. Results show that the maximum oil yield of 37% was obtained at 20 min with microwave power intensity of 330 W and S/F ratio of 20. The main fatty acid composition of castor oil is ricinoleic acid. The density, refractive index, dielectric properties and oxidation stability of oils are not affected by the extraction methods and extraction parameters of MAE. However, the MAE-extracted oil is more viscous compared to that by Soxhlet method. With extra caution on oil oxidation, MAE could be a promising solvent extraction method with an 86% less in processing time and a higher yield.

Microwave-assisted Micellar Extraction and Determination of Glycyrrhizic Acid and Liquiritin in Licorice Root by HPLC

The feasibility of employing non-ionic surfactant(Triton X-100)as an alternative and effective solventfor the microwave-assisted extraction of glycyrrhizic acid(GA)and liquiritin(LQ)from licorice root was studied.The optimal extraction parameters based on the microwave-assisted micellar extraction technique were determined.Under the optimal conditions,i.e.5%(by volume)Triton X-100,microwave-assisted extraction for 3—5min at373K,the percentage extraction of active ingredients reached the highest value.The preconcentration factor for GAand LQ(about 13.5)and the extraction efficiency for these two ingredients approached 100%showed the couplingof microwave-assisted extraction and cloud-point extraction could be employed as a new and effective techniquefor the rapid extraction and preconcentration of pharmacologically active ingredients from medicinal plants such aslicorice root without disturbing chromatographic analysis.

Response surface optimization of microwave-assisted extraction for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii

Microwave-assisted extraction was optimized with response surface methodology for HPLC-fluorescence determination of puerarin and daidzein in Radix Puerariae thomsonii.The optimized extraction procedure was achieved by soaking the sample with 70% methanol(1∶15,v/v)for 30 min,and then microwave irradiation for 11 min at a power of 600 W.Coupling the extraction process with HPLC-fluorescence presented good recovery,satisfactory precision,and good linear relation.Compared with a method from the Chinese Pharmacopoeia,the proposed method enables higher extraction efficiency and more accurate analytical results.It can be of potential value in quality assessment of Radix Puerariae thomsonii medicinal materials.

Microwave-assisted extraction of Shenfu coal and its macromolecule structure

Coals consist of some molecules trapped within an organic matrix from which some organic compounds can be extracted by solvents. The Soxhlet technique has been widely used for extracting organic compounds. Microwave heating methods may be successfully applied in the field of coal science. Acetone extraction yields and the chemical composition of the extract were investigated using a typical Chinese coal, Shenfu coal, with microwave-assisted extraction. The acetone extract and residue were analyzed by GC/MS and carbon-13 nuclear magnetic resonance spectroscopy respectively. The carbon spectra were converted into several numerical parameters, fa, Ha, Xb, which indicate the difference in macromolecular structure between Shenfu coal and its residue. Furthermore, a hybrid genetic algorithm was employed using these parameters to approximate a coal macromolecule by assembling the structural fragments or functional groups into a large and complicated structure.

Dry eye and corneal sensitivity after small incision lenticule extraction and femtosecond laser-assisted in situ keratomileusis:a Meta-analysis

AIM:To assess the corneal sensitivity and the incidences of dry eye after small incision lenticule extraction(SMILE) and femtosecond laser-assisted in situ keratomileusis(FSLASIK).METHODS:The Meta-analysis was performed using Rev Man 5.3.We searched on Pub Med from inception to March 2016.Summary weighted mean difference(WMD) and 95% confidence intervals(CIs) were used to analyze the datum.Random-effects or fixed-effects models were chosen up to between-study heterogeneity.The main outcomes were composed of the Ocular Surface Disease Index(OSDI) scores,tear film break-up time(TBUT),Schirmer Test and corneal sensitivity.RESULTS:Eight eligible studies including 772 eyes(386 in SMILE group and 386 in FS-LASIK group) were identified.The parameters have no significiant difference heterogeneity between SMILE and FS-LASIK group preoperatively.There were significant differences between the two groups in OSDI scores at one and three months postoperatively,in TBUT at one and three months postoperatively,in corneal sensitivity at one week,about one month and three months postoperatively.However,there was no significant difference observed in Schirmer Test at the follow-up periods.CONCLUSION:Compare to FS-LASIK,dry eye and the corneal sensitivity recover better in the SMILE group,in first three months after the surgery.

Three-year results of small incision lenticule extraction and wavefront-guided femtosecond laser-assisted laser in situ keratomileusis for correction of high myopia and myopic astigmatism

AIM: To compare and calculate the 3-year refractive results, higher-order aberrations(HOAs), contrast sensitivity(CS) and dry eye parameters after small incision lenticule extraction(SMILE) and wavefront-guided femtosecond laser-assisted laser in situ keratomileusis(FS-LASIK) for correction of high myopia and myopic astigmatism.METHODS: In this prospective, non-randomized comparative study, 78 eyes with spherical equivalent(SE) of-8.11±1.09 diopters(D) received a SMILE surgery, and 65 eyes with SE of-8.05±1.12 D received a wavefront-guided FS-LASIK surgery with the Visu Max femtosecond laser(Carl Zeiss Meditec, Jena, Germany) for flap cutting. Visual acuity, manifest refraction, CS, HOAs, ocular surface disease index(OSDI) and tear break-up time(TBUT) were evaluated during a 3-year follow-up.RESULTS: The difference of uncorrected distance visual acuity(UDVA) postoperatively was achieved at 1 mo and at3 mo, whereas the difference of the mean UDVA between two groups at 3 y were not statistically significant(t=-1.59,P=0.13). The postoperative change of SE was 0.89 D in the FS-LASIK group(t=5.76, P=0.00), and 0.14 D in the SMILE group(t=0.54, P=0.59) from 1 mo to 3 y after surgery.At 3-year postoperatively, both HOAs and spherical aberrations in the SMILE group were obviously less than those in the FS-LASIK group(P=0.00), but the coma root mean square(RMS) was higher in the SMILE group(0.59±0.26) than in the FS-LASIK group(0.29±0.14, P=0.00).The mesopic CS values between two groups were not statistically significant at 3 y postoperatively. Comparedwith the FS-LASIK group, lower OSDI scores and longer TBUT values were found in the SMILE group at 1 mo and 3 mo postoperatively. With regard to safety, no eye lost any line of CDVA in both groups at 3 y after surgery. CONCLUSION: Both SMILE and wavefront-guided FSLASIK procedures provide good visual outcomes. Both procedures are effective and safe, but SMILE surgery achieve more stable long-term refractive outcome and better control of early postoperative dry eye as compared to FS-LASIK.

Application and research advancement on the microwave-assisted extraction

This paper summarized application and research advancement of the microwave-assisted extraction in the agriculture, food industry,environmental analytical chemistry,traditional Chinese medicine industry,and so on.The microwave-assisted extraction was manifested to be a simple device,wide area of application,high extraction efficiency,good reproducibility and low consumption of agent and time as well as low environmental pollution.At present,industrialization question of the microwave-assisted extraction technology has been attached importance,which will impel the microwave-assisted extraction technology to more development in the future.

Optimization of enzyme assisted extraction of polysaccharides from Ganoderma lucidum

In the present work,an enzyme assisted extraction method is used to isolate crude polysaccharides from Ganoderma lucidum. The isolating effect was optimized with orthographic graph statistic method with three levels and four independent variables. Complex enzyme,extraction temperature,extraction time and extraction pH were combined to obtain the best possible combination to get maximum amount of extract and crude polysaccharides yield. The optimum extraction conditions were:complex enzyme amount of 3 %(w/v),extraction temperature at 45 ℃,extraction time of 3 h and extraction pH at 7. Under these conditions,the experimental amount of extract is 8.9 % and the yield of crude polysaccharides is 1.1 %,which are in close agreement with the value predicted by the model.