In this paper,the specimens of polymer-cement composites after 1 d,7 d,15 d,and 30 d aging without aging and UV aging are subjected to fixed extension test and tensile test.By observing the mode of the composite in th...In this paper,the specimens of polymer-cement composites after 1 d,7 d,15 d,and 30 d aging without aging and UV aging are subjected to fixed extension test and tensile test.By observing the mode of the composite in the fixed-elongation test,and measuring the elastic recovery rate,tensile strength,elongation at break,peak tensile strain,tensile toughness and pre-peak tensile toughness of the composite,the effects of UV aging on the bonding and the tensile properties of the composite were studied.And combining with scanning electron microscopy experiments,the micro-mechanism of the effect of ultraviolet aging on the properties of composite was analyzed.The results showed that the composite had a good bonding property,and no damage was observed after UV aging for 30 days.The UV aging increased the elastic recovery rate and peak tensile within a certain range.The elastic recovery rate and peak tensile strain of the composite increased by 6.60%and 23.55%respectively after UV aging for 15 days.Therefore,the UV aging could enhance the tensile property and the tensile energy consumption performance of the composite.The tensile strength of the composite increased by 65.36%after UV aging for 30 days.The tensile toughness and pre-peak tensile toughness of the composite were increased by 43.29%and 101.83%respectively after UV aging for 15 days.The elongation at break of composite decreased continuously after UV aging due to the photo-oxygen reaction,as well as secondary hydration reaction and cross-linking curing reaction of cement.展开更多
Types 316 and 304 stainless steel are two candidates for the storage vessels and piping systems of LABbased liquid scintillator（LS） in the JUNO experiment. LS aging experiments are carried out at temperatures of 40 ...Types 316 and 304 stainless steel are two candidates for the storage vessels and piping systems of LABbased liquid scintillator（LS） in the JUNO experiment. LS aging experiments are carried out at temperatures of 40 and 25. After 192 days aging at 40, the attenuation length of LS was reduced by 6% in a glass container, 12%in a type 304 stainless steel tank, and 10% in a type 316 stainless steel tank. At 25 in 304 and 316 stainless steel tanks, the attenuation length was reduced by 6% after 307 days. The light yield and the absorption spectrum were practically the same as that of the unaged sample. The concentration of element Fe in the LAB-based LS did not show a clear change. Type 316 and 304 stainless steel can be used as vessels and transportation pipeline material for LAB-based LS.展开更多
基金This research was funded by the National Natural Science Foundation of China,Grant No.51208507.
文摘In this paper,the specimens of polymer-cement composites after 1 d,7 d,15 d,and 30 d aging without aging and UV aging are subjected to fixed extension test and tensile test.By observing the mode of the composite in the fixed-elongation test,and measuring the elastic recovery rate,tensile strength,elongation at break,peak tensile strain,tensile toughness and pre-peak tensile toughness of the composite,the effects of UV aging on the bonding and the tensile properties of the composite were studied.And combining with scanning electron microscopy experiments,the micro-mechanism of the effect of ultraviolet aging on the properties of composite was analyzed.The results showed that the composite had a good bonding property,and no damage was observed after UV aging for 30 days.The UV aging increased the elastic recovery rate and peak tensile within a certain range.The elastic recovery rate and peak tensile strain of the composite increased by 6.60%and 23.55%respectively after UV aging for 15 days.Therefore,the UV aging could enhance the tensile property and the tensile energy consumption performance of the composite.The tensile strength of the composite increased by 65.36%after UV aging for 30 days.The tensile toughness and pre-peak tensile toughness of the composite were increased by 43.29%and 101.83%respectively after UV aging for 15 days.The elongation at break of composite decreased continuously after UV aging due to the photo-oxygen reaction,as well as secondary hydration reaction and cross-linking curing reaction of cement.
基金Supported by Strategic Priority Research Program of the Chinese Academy of Sciences(XDA10010500)National Natural Science Foundation of China(11205183,11005117,11225525,11390384)
文摘Types 316 and 304 stainless steel are two candidates for the storage vessels and piping systems of LABbased liquid scintillator（LS） in the JUNO experiment. LS aging experiments are carried out at temperatures of 40 and 25. After 192 days aging at 40, the attenuation length of LS was reduced by 6% in a glass container, 12%in a type 304 stainless steel tank, and 10% in a type 316 stainless steel tank. At 25 in 304 and 316 stainless steel tanks, the attenuation length was reduced by 6% after 307 days. The light yield and the absorption spectrum were practically the same as that of the unaged sample. The concentration of element Fe in the LAB-based LS did not show a clear change. Type 316 and 304 stainless steel can be used as vessels and transportation pipeline material for LAB-based LS.
