A new numerical model for low-permeability reservoirs is developed.The model incorporates the nonlinear characteristics of oil-water two-phase flows while taking into account the initiation pressure gradient.Related n...A new numerical model for low-permeability reservoirs is developed.The model incorporates the nonlinear characteristics of oil-water two-phase flows while taking into account the initiation pressure gradient.Related numerical solutions are obtained using a finite difference method.The correctness of the method is demonstrated using a two-dimensional inhomogeneous low permeability example.Then,the differences in the cumulative oil and water production are investigated for different starting water saturations.It is shown that when the initial water saturation grows,the water content of the block continues to rise and the cumulative oil production gradually decreases.展开更多
Micro-mobile heat pipe-cooled nuclear power plants are promising candidates for distributed energy resource power genera-tors and can be flexibly deployed in remote places to meet increasing electric power demands.How...Micro-mobile heat pipe-cooled nuclear power plants are promising candidates for distributed energy resource power genera-tors and can be flexibly deployed in remote places to meet increasing electric power demands.However,previous steady-state simulations and experiments have deviated significantly from actual micronuclear system operations.Hence,a transient analysis is required for performance optimization and safety assessment.In this study,a hardware-in-the-loop(HIL)approach was used to investigate the dynamic behavior of scaled-down heat pipe-cooled systems.The real-time features of the HIL architecture were interpreted and validated,and an optimal time step of 500 ms was selected for the thermal transient.The power transient was modeled using point kinetic equations,and a scaled-down thermal prototype was set up to avoid mod-eling unpredictable heat transfer behaviors and feeding temperature samples into the main program running on a desktop PC.A series of dynamic test results showed significant power and temperature oscillations during the transient process,owing to the inconsistency of the rapid nuclear reaction rate and large thermal inertia.The proposed HIL approach is stable and effective for further studying of the dynamic characteristics and control optimization of solid-state small nuclear-powered systems at an early prototyping stage.展开更多
The anaerobic ammonia oxidation(Anammox) bioreactor was successfully started up with the nitrifying activated sludge. After anaerobically operated for 105 d, the bioreactor reached a good performance with removal perc...The anaerobic ammonia oxidation(Anammox) bioreactor was successfully started up with the nitrifying activated sludge. After anaerobically operated for 105 d, the bioreactor reached a good performance with removal percentage of both ammonia and nitrite higher than 95% and volumetric total nitrogen removal as high as 149.55 mmol/(L·d). The soft padding made an important contribution to the high efficiency and stability because it held a large amount of biomass in the bioreactor.展开更多
Starting the cracking gas compressor and precooling the refrigeration system are keys to start-up of an ethylene plant and accounts for up to 50% of the total start-up time and plant flare emissions. Premature feeding...Starting the cracking gas compressor and precooling the refrigeration system are keys to start-up of an ethylene plant and accounts for up to 50% of the total start-up time and plant flare emissions. Premature feeding of cracking furnaces can be avoided if the cracking gas compressor is started and the refrigeration system is precooled in advance using mixed gas as the start-up working medium(SWM). Start-up scenario with mixed gas as SWM could significantly reduce the emission loss and shorten the precooling time. Research shows that making appropriate start-up scheme is important not only to ensure operational safety and feasibility, but also to reduce energy consumption. In this paper, a method is proposed to select suitable start-up operational parameters of compression and refrigeration system with sufficient safe operating ranges and short precooling time. The complex interrelation among key parameters of start-up is analyzed. It is found that higher energy consumption, especially for super high-pressure steam(SS), can promote operational safety and shorten the precooling time during start-up.Based on steady-state and dynamic simulation, appropriate operating parameter ranges are determined with reasonable SS consumption. A real case study demonstrates that an appropriate start-up scheme will optimize the operation.展开更多
The start-up process of Stokes' second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady os...The start-up process of Stokes' second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady oscillation. Exact solutions are obtained by using Laplace transform and Fourier transform. It is found that the relationship between the first peak value and the one of equal-amplitude oscillations depends on the distance from the plate. The amplitude decreases for increasing frequency and increasing distance.展开更多
In order to research start-up pressure wave propagation mechanism and determine pressure wave speed in gelled crude oil pipelines accurately,experiment of Large-scale flow loop was carried out.In the experiment,start-...In order to research start-up pressure wave propagation mechanism and determine pressure wave speed in gelled crude oil pipelines accurately,experiment of Large-scale flow loop was carried out.In the experiment,start-up pressure wave speeds under various operation conditions were measured,and effects of correlative factors on pressure wave were analyzed.The experimental and theoretical analysis shows that thermal shrinkage and structural properties of gelled crude oils are key factors influencing on start-up pressure wave propagation.The quantitative analysis for these effects can be done by using volume expansion coefficient and structural property parameter of gelled crude oil.A new calculation model of pressure wave speed was developed on the basis of Large-scale flow loop experiment and theoretical analysis.展开更多
In order to understand the effect of low temperature on the formation process of aerobic granules and contaminants removal characteristics,the aerobic granules-membrane bioreactor (AGS-MBR) has been started up and ope...In order to understand the effect of low temperature on the formation process of aerobic granules and contaminants removal characteristics,the aerobic granules-membrane bioreactor (AGS-MBR) has been started up and operated at low temperature using the carbon resource of sodium acetate. Aerobic granules cultivated in AGS-MBR possess smooth surface and compact structure in morphology as well as better settling property and higher biomass after 38 days. The average parameters of aerobic granules are: diameter 3. 1 mm,wet density 1. 041 g/mL,sludge volume index 42. 35 mL/g and settling velocity 20. 6 - 45. 2 cm/min. During the start-up of AGS-MBR,the respectively average contaminants removal efficiencies at low temperature are 91. 9% for chemical oxygen demand (COD) ,89. 2% for NH4 + -N and 86. 3% for PO43- -P,and the overgrowth of filamentous bacteria has been well controlled. In addition,the hollow fiber microfiltration (MF) membrane fouling is light and the regime membrane layer is capable of enhancing membrane filtration as well as the average growth of trans-membrane pressure (TMP) is 1. 07 kPa/d. Compared with the conventional cultivation of aerobic granules,the sludge granulation time significantly decreases from 73 days to 38 days by the application of microfiltration membrane at low temperature.展开更多
The primary issue for the commercialization of proton exchange membrane fuel cell(PEMFC) is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitize...The primary issue for the commercialization of proton exchange membrane fuel cell(PEMFC) is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitized carbon induced by heat-treatment. The degree of graphitization starts to increase between 900 and 1300 ℃ as evidenced by the change of specific surface area, interlayer spacing, and ID/IG value. Pt nanoparticles are deposited on fresh carbon black(Pt/CB) and carbon heat-treated at 1700 ℃(Pt/HCB17) with similar particle size and distribution. Electrochemical characterization demonstrates that the Pt/HCB17 shows higher activity than the Pt/CB due to the inefficient microporous structure of amorphous carbon for the oxygen reduction reaction. An accelerating potential cycle between 1.0 and 1.5 V for the carbon corrosion is applied to examine durability at a single cell under the practical start-up/shutdown conditions. The Pt/HCB17 catalyst shows remarkable durability after 3000 potential cycles. The Pt/HCB17 catalyst exhibits a peak power density gain of 3%, while the Pt/CB catalyst shows 65% loss of the initial peak power density. As well, electrochemical surface area and mass activity of Pt/HCB17 catalyst are even more stable than those of the Pt/CB catalyst. Consequently, the high degree of graphitization is essential for the durability of fuel cells in practical start-up/shut-down conditions due to enhancing the strong interaction of Pt and π-bonds in graphitized carbon.展开更多
Gas bearings,which have the advantages of low frictional resistance and power loss,high rotational speed and high temperature operation,and long life,are more suitable than are traditional liquid lubricated bearings b...Gas bearings,which have the advantages of low frictional resistance and power loss,high rotational speed and high temperature operation,and long life,are more suitable than are traditional liquid lubricated bearings because of their high precision,high rotational speed,and special condition support.However,the problem of starting a closed-cycle compression system with gas bearings still needs to be solved for practical application.Thus,a new start-up method for a closed-cycle compression system with aerostatic gas bearings is proposed in this paper.Further,this paper presents a numerical simulation and experimental investigation of the method’s feasibility and characteristics during the start-up process when the gas tank’s initial pressure is fixed.The results show that the gas tank volume is approximately directly proportional to the start-up time allowable,and a gas tank volume sufficiently small,which not only ensures the feasibility of start-up,but also affects other components only slightly,can be obtained.A perfect combination of radial and axial loads also can be achieved to make the start-up time allowable as long as possible.R134a is a better choice for the working medium than is air,as the start-up time allowable is longer,which leads to a smaller gas tank.This research proposes a new start-up method for a closed-cycle compression system with aerostatic gas bearings which has sufficient load capacity to support system during the start-up method.展开更多
A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/...A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/mixing behavior of actual trays in a distillation column.Com-parison is made among the computed results of the start-up time and the dynamic response time bythe proposed and five other typical models.It is found that the computed time for both dynamicprocesses is longer by the model which considers any flow/mixing pattern than by the model withoutsuch concern.The inertia effect of flow/mixing seems to be important and can not be ignored inmodeling the transient process of distillation.The proposed model,which is believed to be suitableto large column,seems somewhat useful in predicting industrial distillation dynamics.展开更多
Several strategies with different combination of inocula and packing material were investigated to obtain the optimal start-up time and elimination capacity (EC) in toluene biofiltration. The inocula contained the act...Several strategies with different combination of inocula and packing material were investigated to obtain the optimal start-up time and elimination capacity (EC) in toluene biofiltration. The inocula contained the activated sludge and toluene degrading bacteria, and the packing material consisted of different mixing ratios of peat and wood chips. A final toluene load of 21.2 g/(m3·h) was attained step by step in four parallel biofilters. A shortest start-up time of 15 days and a highest EC of 17.0 g/(m3·h) were observed in the biofilter B-4, which was inoculated with a special microbial consortium consisting of three strains of toluene degrading bacteria and was packed with the mixture of peat and wood chips at a ratio of 80:20 (w/w). These results indicated that inoculating pre-acclimatized microbes dramatically shortened the start-up time, and such a composition of packing material could maintain an appropriate environment (with the bed porosity and water content equating to 0.45 and 1.96, respectively) for the growth of dominant toluene degrading bacteria in the biofilter.展开更多
To improve the start-up behavior of tokamak discharges and realize the low loop voltage start-up is required by performance of large scale, full superconductor tokamaks. In recent years, some kinds of RF wave have bee...To improve the start-up behavior of tokamak discharges and realize the low loop voltage start-up is required by performance of large scale, full superconductor tokamaks. In recent years, some kinds of RF wave have been used to assist the start-up and some exciting results have been gained. This paper introduce the investigation on both in physical principle and experimental research of the start-up process, in which high frequency RF waves were used to assist it.展开更多
A particle-in-cell Monte Carlo collision model of a discharge chamber is established to investigate the start-up process of a miniature ion thruster.We present the discharge characteristics at different stages(the ini...A particle-in-cell Monte Carlo collision model of a discharge chamber is established to investigate the start-up process of a miniature ion thruster.We present the discharge characteristics at different stages(the initial stage,development stage,and stable stage)according to the trend of the discharge current with time.The discharge current is the sum of the sidewall current and the backplate current.During the start-up process,the sidewall current lags behind the backplate current.The variation and distribution characteristics of the discharge current over time are determined by the electron density distribution and electric potential distribution.展开更多
An expanded granular sludge bed (EGSB) reactor inoculated with anaerobic granular sludge was started up with its COD removal performance, self-balancing of pH, biogas production rate and characteristics of the granu...An expanded granular sludge bed (EGSB) reactor inoculated with anaerobic granular sludge was started up with its COD removal performance, self-balancing of pH, biogas production rate and characteristics of the granular sludge during the start-up period being investigated. The results indicated that the EGSB reactor can be started up successfully in 27 d by increasing the organic loading rate rapidly. The removal efficiency of COD was maintained above 93% with influent COD concentration of 25 000 mg/L and OLR of 37.94 kgCOD/(m 3 ·d). The EGSB reactor with good pH self-balancing could be fed with fresh leachate of low pH value (4 5). The biogas production rate was closely related with OLR and COD reduction. Every gram of COD fed (consumed) to the reactor produced 0.34 L STP (0.36 L STP ) biogas with 0.21 L STP (0.23 L STP ) methane. Thus, 65% 70% of the produced biogas was methane. Sixty one percentage of COD fed to the reactor was converted to methane, another 33% was converted to biomass by metabolism, and the other 6% was left in the liquid phase. The specific methanogenic activity (SMA) of the granular sludge had increased by 92% after 27 d dynamic incubation. The granular sludge in the reactor had good settlement performance with majority diameter of 1 2 mm.展开更多
This research paper investigates the role of Italian venture capital in supporting innovative start-ups in their early-stage process,which is usually focused on the creation of a new product or the development of a ne...This research paper investigates the role of Italian venture capital in supporting innovative start-ups in their early-stage process,which is usually focused on the creation of a new product or the development of a new service.The aim of the study is to observe and assess the key economic features of innovative start-ups funded at the beginning of the early-stage by venture capital funds and thereafter analyze the level of development of target companies at four years since the capital injection.The sample of deals created to describe this dynamic process is composed by investments realized between 1996 and 2012 and,in this way,according to the chosen methodology,it is representative of Italian venture capital role and contribution in the years from 1996 to 2016.The authors used for their empirical study a proprietary database,Venture Capital Monitor—VeMTM.Through the analysis of collected data,the paper describes the strategic importance of venture capital investments in early-stage opportunities both for target companies and the Italian socio-economic environment,and finds aggregate values of reference to quantitatively define the socio-economic outcome of this kind of operations.A final further contribution is provided by comparing the present results to the ones of two previous studies conducted by the authors.展开更多
Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especi...Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.展开更多
The tokamak start-up is a very important phase during the process to obtain a suitable equalizing plasma, and its governing model can be described as a set of nonlinear ordinary differential equations(ODEs). In this...The tokamak start-up is a very important phase during the process to obtain a suitable equalizing plasma, and its governing model can be described as a set of nonlinear ordinary differential equations(ODEs). In this paper, we first estimate the parameters in the original model and set up an accurate model to express how the variables change during the start-up phase, especially how the plasma current changes with respect to time and the loop voltage. Then, we apply the control parameterization method to obtain an approximate optimal parameters selection problem for the loop voltage design to achieve a desired plasma current target. Computational optimal control techniques such as the variational method and the costate method are employed to solve the problem, respectively. Finally, numerical simulations are performed and the results obtained via different methods are compared. Our numerical parameterization method and optimization procedure turn out to be effective.展开更多
Low voltage start-up was realized in HT-7 discharges under the assistance of lower hybrid (LH) waves. The use of a strong LH wavet which can Change its N// spectrum in a large range of several milliseconds, made the l...Low voltage start-up was realized in HT-7 discharges under the assistance of lower hybrid (LH) waves. The use of a strong LH wavet which can Change its N// spectrum in a large range of several milliseconds, made the loop voltage for start-up reduce from around 20 V to less than 5 V. It means that the electric field for HT-7 start-up decreases from 2.5-3 V/m to 0.6 V/m. Some physical phenomena such as the consumption of magnetic flux in start-up phase and the radiation from the initial plasma were observed in this kind of low voltage start-up discharges.展开更多
文摘A new numerical model for low-permeability reservoirs is developed.The model incorporates the nonlinear characteristics of oil-water two-phase flows while taking into account the initiation pressure gradient.Related numerical solutions are obtained using a finite difference method.The correctness of the method is demonstrated using a two-dimensional inhomogeneous low permeability example.Then,the differences in the cumulative oil and water production are investigated for different starting water saturations.It is shown that when the initial water saturation grows,the water content of the block continues to rise and the cumulative oil production gradually decreases.
基金This work was financially supported by the National Key R&D Program of China(No.2020YFB1901900)National Natural Science Foundation of China(No.12275175)+2 种基金Special Fund for Strengthening Industry of Shanghai(No.GYQJ-2018-2-02)Shanghai Rising Star Program(No.21QA1404200)the LingChuang Research Project of the China National Nuclear Corporation.
文摘Micro-mobile heat pipe-cooled nuclear power plants are promising candidates for distributed energy resource power genera-tors and can be flexibly deployed in remote places to meet increasing electric power demands.However,previous steady-state simulations and experiments have deviated significantly from actual micronuclear system operations.Hence,a transient analysis is required for performance optimization and safety assessment.In this study,a hardware-in-the-loop(HIL)approach was used to investigate the dynamic behavior of scaled-down heat pipe-cooled systems.The real-time features of the HIL architecture were interpreted and validated,and an optimal time step of 500 ms was selected for the thermal transient.The power transient was modeled using point kinetic equations,and a scaled-down thermal prototype was set up to avoid mod-eling unpredictable heat transfer behaviors and feeding temperature samples into the main program running on a desktop PC.A series of dynamic test results showed significant power and temperature oscillations during the transient process,owing to the inconsistency of the rapid nuclear reaction rate and large thermal inertia.The proposed HIL approach is stable and effective for further studying of the dynamic characteristics and control optimization of solid-state small nuclear-powered systems at an early prototyping stage.
文摘The anaerobic ammonia oxidation(Anammox) bioreactor was successfully started up with the nitrifying activated sludge. After anaerobically operated for 105 d, the bioreactor reached a good performance with removal percentage of both ammonia and nitrite higher than 95% and volumetric total nitrogen removal as high as 149.55 mmol/(L·d). The soft padding made an important contribution to the high efficiency and stability because it held a large amount of biomass in the bioreactor.
基金Supported by the National Basic Research Program of China(2012CB720500)the National Natural Science Foundation of China(U1462206)
文摘Starting the cracking gas compressor and precooling the refrigeration system are keys to start-up of an ethylene plant and accounts for up to 50% of the total start-up time and plant flare emissions. Premature feeding of cracking furnaces can be avoided if the cracking gas compressor is started and the refrigeration system is precooled in advance using mixed gas as the start-up working medium(SWM). Start-up scenario with mixed gas as SWM could significantly reduce the emission loss and shorten the precooling time. Research shows that making appropriate start-up scheme is important not only to ensure operational safety and feasibility, but also to reduce energy consumption. In this paper, a method is proposed to select suitable start-up operational parameters of compression and refrigeration system with sufficient safe operating ranges and short precooling time. The complex interrelation among key parameters of start-up is analyzed. It is found that higher energy consumption, especially for super high-pressure steam(SS), can promote operational safety and shorten the precooling time during start-up.Based on steady-state and dynamic simulation, appropriate operating parameter ranges are determined with reasonable SS consumption. A real case study demonstrates that an appropriate start-up scheme will optimize the operation.
文摘The start-up process of Stokes' second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady oscillation. Exact solutions are obtained by using Laplace transform and Fourier transform. It is found that the relationship between the first peak value and the one of equal-amplitude oscillations depends on the distance from the plate. The amplitude decreases for increasing frequency and increasing distance.
基金Project(2008B-2901) supported by China National Petroleum Corporation
文摘In order to research start-up pressure wave propagation mechanism and determine pressure wave speed in gelled crude oil pipelines accurately,experiment of Large-scale flow loop was carried out.In the experiment,start-up pressure wave speeds under various operation conditions were measured,and effects of correlative factors on pressure wave were analyzed.The experimental and theoretical analysis shows that thermal shrinkage and structural properties of gelled crude oils are key factors influencing on start-up pressure wave propagation.The quantitative analysis for these effects can be done by using volume expansion coefficient and structural property parameter of gelled crude oil.A new calculation model of pressure wave speed was developed on the basis of Large-scale flow loop experiment and theoretical analysis.
基金Sponsored by the National High Technology Research and Development Program of China (863 Program,Grant No.2008AA06Z304)State Water Pollution Control and Harnessing of the Major Projects (Grant No.2009ZX07424-005)International Cooperation Program (Grant No.2010DFA92460)
文摘In order to understand the effect of low temperature on the formation process of aerobic granules and contaminants removal characteristics,the aerobic granules-membrane bioreactor (AGS-MBR) has been started up and operated at low temperature using the carbon resource of sodium acetate. Aerobic granules cultivated in AGS-MBR possess smooth surface and compact structure in morphology as well as better settling property and higher biomass after 38 days. The average parameters of aerobic granules are: diameter 3. 1 mm,wet density 1. 041 g/mL,sludge volume index 42. 35 mL/g and settling velocity 20. 6 - 45. 2 cm/min. During the start-up of AGS-MBR,the respectively average contaminants removal efficiencies at low temperature are 91. 9% for chemical oxygen demand (COD) ,89. 2% for NH4 + -N and 86. 3% for PO43- -P,and the overgrowth of filamentous bacteria has been well controlled. In addition,the hollow fiber microfiltration (MF) membrane fouling is light and the regime membrane layer is capable of enhancing membrane filtration as well as the average growth of trans-membrane pressure (TMP) is 1. 07 kPa/d. Compared with the conventional cultivation of aerobic granules,the sludge granulation time significantly decreases from 73 days to 38 days by the application of microfiltration membrane at low temperature.
文摘The primary issue for the commercialization of proton exchange membrane fuel cell(PEMFC) is the carbon corrosion of support under start-up/shut-down conditions. In this study, we employ the nanostructured graphitized carbon induced by heat-treatment. The degree of graphitization starts to increase between 900 and 1300 ℃ as evidenced by the change of specific surface area, interlayer spacing, and ID/IG value. Pt nanoparticles are deposited on fresh carbon black(Pt/CB) and carbon heat-treated at 1700 ℃(Pt/HCB17) with similar particle size and distribution. Electrochemical characterization demonstrates that the Pt/HCB17 shows higher activity than the Pt/CB due to the inefficient microporous structure of amorphous carbon for the oxygen reduction reaction. An accelerating potential cycle between 1.0 and 1.5 V for the carbon corrosion is applied to examine durability at a single cell under the practical start-up/shutdown conditions. The Pt/HCB17 catalyst shows remarkable durability after 3000 potential cycles. The Pt/HCB17 catalyst exhibits a peak power density gain of 3%, while the Pt/CB catalyst shows 65% loss of the initial peak power density. As well, electrochemical surface area and mass activity of Pt/HCB17 catalyst are even more stable than those of the Pt/CB catalyst. Consequently, the high degree of graphitization is essential for the durability of fuel cells in practical start-up/shut-down conditions due to enhancing the strong interaction of Pt and π-bonds in graphitized carbon.
基金Supported by National Natural Science Foundation of China(Grant No.51706009).
文摘Gas bearings,which have the advantages of low frictional resistance and power loss,high rotational speed and high temperature operation,and long life,are more suitable than are traditional liquid lubricated bearings because of their high precision,high rotational speed,and special condition support.However,the problem of starting a closed-cycle compression system with gas bearings still needs to be solved for practical application.Thus,a new start-up method for a closed-cycle compression system with aerostatic gas bearings is proposed in this paper.Further,this paper presents a numerical simulation and experimental investigation of the method’s feasibility and characteristics during the start-up process when the gas tank’s initial pressure is fixed.The results show that the gas tank volume is approximately directly proportional to the start-up time allowable,and a gas tank volume sufficiently small,which not only ensures the feasibility of start-up,but also affects other components only slightly,can be obtained.A perfect combination of radial and axial loads also can be achieved to make the start-up time allowable as long as possible.R134a is a better choice for the working medium than is air,as the start-up time allowable is longer,which leads to a smaller gas tank.This research proposes a new start-up method for a closed-cycle compression system with aerostatic gas bearings which has sufficient load capacity to support system during the start-up method.
文摘A new dynamic non-equilibrium mixing-pool model for simulating start-up and dynamic re-sponse of a distillation column is reported.The proposed model is established on the basis ofconsidering the two dimensional flow/mixing behavior of actual trays in a distillation column.Com-parison is made among the computed results of the start-up time and the dynamic response time bythe proposed and five other typical models.It is found that the computed time for both dynamicprocesses is longer by the model which considers any flow/mixing pattern than by the model withoutsuch concern.The inertia effect of flow/mixing seems to be important and can not be ignored inmodeling the transient process of distillation.The proposed model,which is believed to be suitableto large column,seems somewhat useful in predicting industrial distillation dynamics.
基金financial supports by the National Natural Science Foundation of China (Grant No. 21505156)the Fundamental Research Funds for the Central Universities (24720122043)the Scientific Research and Technological Development Projects of PetroChina Co., Ltd. (2013F-2101)
文摘Several strategies with different combination of inocula and packing material were investigated to obtain the optimal start-up time and elimination capacity (EC) in toluene biofiltration. The inocula contained the activated sludge and toluene degrading bacteria, and the packing material consisted of different mixing ratios of peat and wood chips. A final toluene load of 21.2 g/(m3·h) was attained step by step in four parallel biofilters. A shortest start-up time of 15 days and a highest EC of 17.0 g/(m3·h) were observed in the biofilter B-4, which was inoculated with a special microbial consortium consisting of three strains of toluene degrading bacteria and was packed with the mixture of peat and wood chips at a ratio of 80:20 (w/w). These results indicated that inoculating pre-acclimatized microbes dramatically shortened the start-up time, and such a composition of packing material could maintain an appropriate environment (with the bed porosity and water content equating to 0.45 and 1.96, respectively) for the growth of dominant toluene degrading bacteria in the biofilter.
基金The project supported by the National Nature Science Fundamental of China (No. 19975048)
文摘To improve the start-up behavior of tokamak discharges and realize the low loop voltage start-up is required by performance of large scale, full superconductor tokamaks. In recent years, some kinds of RF wave have been used to assist the start-up and some exciting results have been gained. This paper introduce the investigation on both in physical principle and experimental research of the start-up process, in which high frequency RF waves were used to assist it.
文摘A particle-in-cell Monte Carlo collision model of a discharge chamber is established to investigate the start-up process of a miniature ion thruster.We present the discharge characteristics at different stages(the initial stage,development stage,and stable stage)according to the trend of the discharge current with time.The discharge current is the sum of the sidewall current and the backplate current.During the start-up process,the sidewall current lags behind the backplate current.The variation and distribution characteristics of the discharge current over time are determined by the electron density distribution and electric potential distribution.
基金supported by the Science and Technology Commission of Shanghai Municipality (Grant Nos.10DZ120010C,D9DZ2251700)
文摘An expanded granular sludge bed (EGSB) reactor inoculated with anaerobic granular sludge was started up with its COD removal performance, self-balancing of pH, biogas production rate and characteristics of the granular sludge during the start-up period being investigated. The results indicated that the EGSB reactor can be started up successfully in 27 d by increasing the organic loading rate rapidly. The removal efficiency of COD was maintained above 93% with influent COD concentration of 25 000 mg/L and OLR of 37.94 kgCOD/(m 3 ·d). The EGSB reactor with good pH self-balancing could be fed with fresh leachate of low pH value (4 5). The biogas production rate was closely related with OLR and COD reduction. Every gram of COD fed (consumed) to the reactor produced 0.34 L STP (0.36 L STP ) biogas with 0.21 L STP (0.23 L STP ) methane. Thus, 65% 70% of the produced biogas was methane. Sixty one percentage of COD fed to the reactor was converted to methane, another 33% was converted to biomass by metabolism, and the other 6% was left in the liquid phase. The specific methanogenic activity (SMA) of the granular sludge had increased by 92% after 27 d dynamic incubation. The granular sludge in the reactor had good settlement performance with majority diameter of 1 2 mm.
文摘This research paper investigates the role of Italian venture capital in supporting innovative start-ups in their early-stage process,which is usually focused on the creation of a new product or the development of a new service.The aim of the study is to observe and assess the key economic features of innovative start-ups funded at the beginning of the early-stage by venture capital funds and thereafter analyze the level of development of target companies at four years since the capital injection.The sample of deals created to describe this dynamic process is composed by investments realized between 1996 and 2012 and,in this way,according to the chosen methodology,it is representative of Italian venture capital role and contribution in the years from 1996 to 2016.The authors used for their empirical study a proprietary database,Venture Capital Monitor—VeMTM.Through the analysis of collected data,the paper describes the strategic importance of venture capital investments in early-stage opportunities both for target companies and the Italian socio-economic environment,and finds aggregate values of reference to quantitatively define the socio-economic outcome of this kind of operations.A final further contribution is provided by comparing the present results to the ones of two previous studies conducted by the authors.
文摘Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.
基金supported by the National Natural Science Foundation of China(Grant Nos.61104048 and 61473253)the National High Technology Research and Development Program of China(Grant No.2012AA041701)
文摘The tokamak start-up is a very important phase during the process to obtain a suitable equalizing plasma, and its governing model can be described as a set of nonlinear ordinary differential equations(ODEs). In this paper, we first estimate the parameters in the original model and set up an accurate model to express how the variables change during the start-up phase, especially how the plasma current changes with respect to time and the loop voltage. Then, we apply the control parameterization method to obtain an approximate optimal parameters selection problem for the loop voltage design to achieve a desired plasma current target. Computational optimal control techniques such as the variational method and the costate method are employed to solve the problem, respectively. Finally, numerical simulations are performed and the results obtained via different methods are compared. Our numerical parameterization method and optimization procedure turn out to be effective.
基金This work is supported by Chinese National Nature Science Foundation, contract No.19975048.
文摘Low voltage start-up was realized in HT-7 discharges under the assistance of lower hybrid (LH) waves. The use of a strong LH wavet which can Change its N// spectrum in a large range of several milliseconds, made the loop voltage for start-up reduce from around 20 V to less than 5 V. It means that the electric field for HT-7 start-up decreases from 2.5-3 V/m to 0.6 V/m. Some physical phenomena such as the consumption of magnetic flux in start-up phase and the radiation from the initial plasma were observed in this kind of low voltage start-up discharges.