Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through anal...Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through analyzing both advantages and disadvantages of some technologies such as mining with stowing, partial extraction and grouting in separated beds of overburden, we used the principle of load replacement and propose a “3-step mining” method, a new pattern of controlling mining subsidence, which consists of： strip mining, i.e. grouting to fill and consolidate the caving zone and retained strip pillar mining. The mechanism of controlling mining subsidence by using the “3-step mining” pattern is analyzed. The effect of the control is numerically simulated. The preliminary analysis shows that the “3-step mining” can effectively control ground subsidence and deformation. By using this method, the ground subsidence factor can be controlled to a value of about 0.25. Coal recovery can reach 80%-90%. Coal mining without removing surface buildins can be realized and the economic loss resultin from round subsidence can be greatly reduced.展开更多
The formation of the paste like backfill technology was introduced briefly in this paper. From the actual cases of coal mines, a new mode of coal mining under buildings with the technology was proposed. And its specif...The formation of the paste like backfill technology was introduced briefly in this paper. From the actual cases of coal mines, a new mode of coal mining under buildings with the technology was proposed. And its specificity was analyzed, and a further introduction to the full sand soil solidifying material was given. The main parts of the backfill system, such as the backfill preparation system, the pipeline transportation system, the backfill systems in fully mechanized mining faces and the backfill process, were presented emphatically.展开更多
Based on the theory of coordinating action of building ground, foundation and structure, this paper presents a modified method for calculating additional stresses on buildings in mining areas by considering the joint ...Based on the theory of coordinating action of building ground, foundation and structure, this paper presents a modified method for calculating additional stresses on buildings in mining areas by considering the joint effect of cur- vature deformation and horizontal deformation on buildings. It points out that for buildings over the coal pillar, it is ad- visable to soften the intermediate ground of buildings when they are affected by mining. For buildings over the goaf, it is preferable to soften the ground at both ends of buildings. In order to enhance the ability of a building to resist tensile deformation, the key measure is to reinforce the bottom foundation of the building. In addition, the concept of “angle of break of building” is proposed. It is because of this angle that the protecting coal pillar is left, which is a better solution than prevailing solutions The findings provide a more scientific basis for mining under buildings.展开更多
Coal mining under buildings certainly causes surface movement and deformation, therefore, it brings about deformation even fracture for buildings. It is an important task to evaluate correcly the buildings’ damage gr...Coal mining under buildings certainly causes surface movement and deformation, therefore, it brings about deformation even fracture for buildings. It is an important task to evaluate correcly the buildings’ damage grabe caused by coal mining. Fuzzy comprehensive evaluation,considering some factors of buildings’ fracture, has been applied to analyze the masonry structure buildings’ damage grade affer coal mining in this paper. It provides a scientific basis for buildings’reidercement before mining and maintenance or compensation after mining.展开更多
A fully-mechanized coal mining (FMCM) technology capable of filling up the goaf with wastes (including solid wastes) is described. Industrial tests have proved that by using this technology not only can waste be re-us...A fully-mechanized coal mining (FMCM) technology capable of filling up the goaf with wastes (including solid wastes) is described. Industrial tests have proved that by using this technology not only can waste be re-used but also coal resources can be exploited with a higher recovery rate without removing buildings located over the working faces. Two special devices, a hydraulic support and a scraper conveyor, run side-by-side on the same working face to simultaneously realize mining and filling. These are described in detail. The tests allow analysis of rock pressure and ground subsidence when backfilling techniques are employed. These values are compared to those from mining without using backfilling techniques, under the same geological conditions. The concept of equivalent mining height is proposed based on theoretical analysis of rock pressure and ground subsidence. The upper limits of the rock pressure and ground subsidence can be estimated in backfilling mining using this concept along with traditional engineering formulae.展开更多
文摘Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through analyzing both advantages and disadvantages of some technologies such as mining with stowing, partial extraction and grouting in separated beds of overburden, we used the principle of load replacement and propose a “3-step mining” method, a new pattern of controlling mining subsidence, which consists of： strip mining, i.e. grouting to fill and consolidate the caving zone and retained strip pillar mining. The mechanism of controlling mining subsidence by using the “3-step mining” pattern is analyzed. The effect of the control is numerically simulated. The preliminary analysis shows that the “3-step mining” can effectively control ground subsidence and deformation. By using this method, the ground subsidence factor can be controlled to a value of about 0.25. Coal recovery can reach 80%-90%. Coal mining without removing surface buildins can be realized and the economic loss resultin from round subsidence can be greatly reduced.
文摘The formation of the paste like backfill technology was introduced briefly in this paper. From the actual cases of coal mines, a new mode of coal mining under buildings with the technology was proposed. And its specificity was analyzed, and a further introduction to the full sand soil solidifying material was given. The main parts of the backfill system, such as the backfill preparation system, the pipeline transportation system, the backfill systems in fully mechanized mining faces and the backfill process, were presented emphatically.
基金Project 50474064 supported by the National Natural Science Foundation of China
文摘Based on the theory of coordinating action of building ground, foundation and structure, this paper presents a modified method for calculating additional stresses on buildings in mining areas by considering the joint effect of cur- vature deformation and horizontal deformation on buildings. It points out that for buildings over the coal pillar, it is ad- visable to soften the intermediate ground of buildings when they are affected by mining. For buildings over the goaf, it is preferable to soften the ground at both ends of buildings. In order to enhance the ability of a building to resist tensile deformation, the key measure is to reinforce the bottom foundation of the building. In addition, the concept of “angle of break of building” is proposed. It is because of this angle that the protecting coal pillar is left, which is a better solution than prevailing solutions The findings provide a more scientific basis for mining under buildings.
文摘Coal mining under buildings certainly causes surface movement and deformation, therefore, it brings about deformation even fracture for buildings. It is an important task to evaluate correcly the buildings’ damage grabe caused by coal mining. Fuzzy comprehensive evaluation,considering some factors of buildings’ fracture, has been applied to analyze the masonry structure buildings’ damage grade affer coal mining in this paper. It provides a scientific basis for buildings’reidercement before mining and maintenance or compensation after mining.
基金supports for this work provided by Na-tional basic research program of China (No. 2007CB209400)the National Natural Science Foundation of China (No. 50834004)+1 种基金the National Natural Science Foundation of China (No. 50574090) SR Foundation of China University of Mining & Technology (No. 50634050)
文摘A fully-mechanized coal mining (FMCM) technology capable of filling up the goaf with wastes (including solid wastes) is described. Industrial tests have proved that by using this technology not only can waste be re-used but also coal resources can be exploited with a higher recovery rate without removing buildings located over the working faces. Two special devices, a hydraulic support and a scraper conveyor, run side-by-side on the same working face to simultaneously realize mining and filling. These are described in detail. The tests allow analysis of rock pressure and ground subsidence when backfilling techniques are employed. These values are compared to those from mining without using backfilling techniques, under the same geological conditions. The concept of equivalent mining height is proposed based on theoretical analysis of rock pressure and ground subsidence. The upper limits of the rock pressure and ground subsidence can be estimated in backfilling mining using this concept along with traditional engineering formulae.
