Novel method for identifying the stages of discharge underwater based on impedance change characteristic

It is difficult to determine the discharge stages in a fixed time of repetitive discharge underwater due to the arc formation process being susceptible to external environmental influences. This paper proposes a novel underwater discharge stage identification method based on the Strong Tracking Filter(STF) and impedance change characteristics. The time-varying equivalent circuit model of the discharge underwater is established based on the plasma theory analysis of the impedance change characteristics and mechanism of the discharge process. The STF is used to reduce the randomness of the impedance of repeated discharges underwater, and then the universal identification resistance data is obtained. Based on the resistance variation characteristics of the discriminating resistance of the pre-breakdown, main, and oscillatory discharge stages, the threshold values for determining the discharge stage are obtained. These include the threshold values for the resistance variation rate(K) and the moment(t).Experimental and error analysis results demonstrate the efficacy of this innovative method in discharge stage determination, with a maximum mean square deviation of Scrless than 1.761.

Radio Frequency Underwater Discharge Operation and Its Application to Congo Red Degradation

Radio frequency （RF） underwater discharge operation was performed for different liquid conductivities driven by different frequencies ranging from 13.56 MHz to 60 MHz, and its application to organic degradation was investigated. The RF underwater discharge was observed to be generated within the bubble at electrode surface formed by RF and plasma heating. It was shown that the sizes of the bubbles and plasmas increased as the driving frequency and the input power went up. The breakdown voltage decreased rapidly with the increase of the water conductivity and driving frequency. Comparative experiments of the UV-VIS absorbance spectra of Congo Red solution before and after discharge suggested effective degradation of the organic dye due to the active species generated during the discharge, such as .OH, .O, .H, etc. revealed by optical emission spectroscopy. The results show that higher exciting frequency and lower conduc- tivity of the solution are more effective for organic degradation. With the combination of Fourier Transform Infrared Spectroscopy （FT-IR） and Liquid Chromatography-Mass Spectrometry （LC- MS） data, one possible degradation process was proposed and the main conceivable components and structures of the products were also presented.

Degradation of antibiotic contaminants from water by gas–liquid underwater discharge plasma

Antibiotic contamination adversely affects human health and ecological balance.In this study,gasliquid underwater discharge plasma was employed to simultaneously degrade three antibiotics,sulfadiazine(SDZ),tetracycline(TC),and norfloxacin(NOR),to address the growing problem of antibiotic contaminants in water.The effects of various parameters on the antibiotic degradation efficiency were evaluated,including the discharge gas type and flow rate,the initial concentration and pH of the solution,and the discharge voltage.Under the optimum parameter configuration,the average removal rate of the three antibiotics was 54.0% and the energy yield was 8.9 g(kW·h)-1after 5 min treatment;the removal efficiency was 96.5% and the corresponding energy yield was4.0 g(kW·h)-1 after 20 min treatment.Reactive substance capture and determination experiments indicated that ·OH and O3 played a vital role in the decomposition of SDZ and NOR,but the role of reactive substances in TC degradation was relatively less significant.

Decoloration of Azo Dye Sunset Yellow by a Coaxial Insulated-Rod-to-Cylinder Underwater Streamer Discharge System

A coaxial insulated-rod-to-cylinder underwater streamer discharge system capable of injecting plasma into a large volume of water was developed and employed to decolorize azo dye sunset yellow. The rod type anode was covered by an insulator tube with a wall thickness of 0.4 mm. A series of slits with a width of 20 μm to 80 μm and a length of about 4 mm were cut onto the wall of the insulator tube. Depending on the solution conductivity, a cylindrical discharge region with a length of 60 mm and a wall thickness of 5 mm to 11 mm forms in the reactor. The influence of the solution conductivity, pH and pulse frequency on the decoloration of sunset yellow was investigated. The results show that the solution conductivity has little effect, while the solution pH and the pulse frequency have significant influence on the decoloration rate of sunset yellow. The decoloration rate of sunset yellow is increased with the increase in pulse frequency. A lower pH in solution promotes the decoloration of sunset yellow while a higher pH inhibits it.

Numerical Simulation of Properties of Charged Particles Initiated by Underwater Pulsed Discharge

Governing conservation equations for energy, momentum, mass and charge were deduced. Based upon these equations and the Saha equation, the particle density, temperature and pressure of the channel initiated by underwater pulsed discharge, are simulated. Influence of temperature and pressure on particles density is also analyzed. Some of the simulation results are in an agreement with experimental results. The results will be helpful in further understanding of the formation mechanism of underwater pulsed discharge plasma.

Improvement of circuit oscillation generated by underwater high voltage pulse discharges based on pulse power thyristor

High voltage fracturing technology was widely used in the field of reservoir reconstruction due to its advantages of being clean, pollution-free, and high-efficiency. However, high-frequency circuit oscillation occurs during the underwater high voltage pulse discharge process, which brings security risks to the stability of the pulse fracturing system. In order to solve this problem, an underwater pulse power discharge system was established, the circuit oscillation generation conditions were analyzed and the circuit oscillation suppression method was proposed. Firstly, the system structure was introduced and the charging model of the energy storage capacitor was established by the state space average method. Next, the electrode high-voltage breakdown model was established through COMSOL software, the electrode breakdown process was analyzed according to the electron density distribution image, and the plasma channel impedance was estimated based on the conductivity simulation results. Then the underwater pulse power discharge process and the circuit oscillation generation condition were analyzed, and the circuit oscillation suppression strategy of using the thyristor to replace the gas spark switch was proposed. Finally, laboratory experiments were carried out to verify the precision of the theoretical model and the suppression effect of circuit oscillation. The experimental results show that the voltage variation of the energy storage capacitor, the impedance change of the pulse power discharge process, and the equivalent circuit in each discharge stage were consistent with the theoretical model. The proposed oscillation suppression strategy cannot only prevent the damage caused by circuit oscillation but also reduce the damping oscillation time by77.1%, which can greatly improve the stability of the system. This research has potential application value in the field of underwater pulse power discharge for reservoir reconstruction.

Underwater pulsed spark discharge influenced by the relative position between the top of a pin electrode and an insulating tube

Needle-to-plane geometry has been widely investigated and used in underwater pulsed discharges.The position relationship between the needle tip and insulation layer significantly affects the discharge patterns.We carried out experiments on underwater pulsed discharge with the needle tip protruding from,recessing into,and flushing with the insulating tube.The results are as follows.First,underwater pulsed discharge has a strong randomness under the experimental conditions.Different discharge patterns appeared under the same experimental environment.Second,recession into the insulator surface led to a higher probability of occurrence but a lower strength of spark discharge than protrusion.Third,between the needle tip protruding from and recessing into the insulation material,the average speed of propagation of underwater pulsed spark discharge decreased by an order of magnitude.The study shows that the optimum length of needle tip protruding from the insulation layer is 1 mm to obtain a strong underwater pulsed spark discharge.

Yield of Ozone,Nitrite Nitrogen and Hydrogen Peroxide Versus Discharge Parameter Using APPJ Under Water

Discharge plasma in and in contact with water can be accompanied with ultraviolet radiation and electron impact, thus can generate hydroxyl radicals, ozone, nitrite nitrogen and hydrogen peroxide. In this paper, a non-equilibrium plasma processing system was established by means of an atmospheric pressure plasma jet immersed in water. The hydroxyl intensities and discharge energy waveforms were tested. The results show that the positive and negative discharge energy peaks were asymmetric, where the positive discharge energy peak was greater than the negative one. Meanwhile, the yield of ozone and nitrite nitrogen was enhanced with the increase of both the treatment time and the discharge energy. Moreover, the pH value of treated water was reduced rapidly and maintained at a lower level. The residual concentration of hydrogen peroxide in APPJ treated water was kept at a low level. Additionally, both the efficiency energy ratio of the yield of ozone and nitrite nitrogen and that of the removal of p-nitrophenol increased as a function of discharge energy and discharge voltage. The experimental results were fully analyzed and the chemical reaction equations and the physical processes of discharges in water were given.

Measurement of Temporally and Spatially Resolved Electron Density in the Filament of a Pulsed Spark Discharge in Water

The temporally and spatially resolved optical emission spectrum of Hα of a pulsed spark discharge in water was experimentally measured. The temporally and spatially resolved electron densities, along the radial direction of the spark filament, for a pulsed spark discharge in water with a conductivity of 100 μS/cm were investigated. The electron density in the spark filament was found to be in the 10^（18）/cm^3 order of magnitude. The highest electron density was measured at the primary stage of the spark filament, and it decreased with time. The radial distribution of electron density increased from the center to the edge of the spark filament.

Advancing Scientific Rigor: Towards a Universal Informational Criterion for Assessing Model-Phenomenon Mismatch

The escalating costs of research and development, coupled with the influx of researchers, have led to a surge in published articles across scientific disciplines. However, concerns have arisen regarding the accuracy, validity, and reproducibility of reported findings. Issues such as replication problems, fraudulent practices, and a lack of expertise in measurement theory and uncertainty analysis have raised doubts about the reliability and credibility of scientific research. Rigorous assessment practices in certain fields highlight the importance of identifying potential errors and understanding the relationship between technical parameters and research outcomes. To address these concerns, a universally applicable criterion called comparative certainty is urgently needed. This criterion, grounded in an analysis of the modeling process and information transmission, accumulation, and transformation in both theoretical and applied research, aims to evaluate the acceptable deviation between a model and the observed phenomenon. It provides a theoretically grounded framework applicable to all scientific disciplines adhering to the International System of Units (SI). Objective evaluations based on this criterion can enhance the reproducibility and reliability of scientific investigations, instilling greater confidence in published findings. Establishing this criterion would be a significant stride towards ensuring the robustness and credibility of scientific research across disciplines.