Set-Membership Filtering Approach to Dynamic Event-Triggered Fault Estimation for a Class of Nonlinear Time-Varying Complex Networks

The present study addresses the problem of fault estimation for a specific class of nonlinear time-varying complex networks,utilizing an unknown-input-observer approach within the framework of dynamic event-triggered mechanism(DETM).In order to optimize communication resource utilization,the DETM is employed to determine whether the current measurement data should be transmitted to the estimator or not.To guarantee a satisfactory estimation performance for the fault signal,an unknown-input-observer-based estimator is constructed to decouple the estimation error dynamics from the influence of fault signals.The aim of this paper is to find the suitable estimator parameters under the effects of DETM such that both the state estimates and fault estimates are confined within two sets of closed ellipsoid domains.The techniques of recursive matrix inequality are applied to derive sufficient conditions for the existence of the desired estimator,ensuring that the specified performance requirements are met under certain conditions.Then,the estimator gains are derived by minimizing the ellipsoid domain in the sense of trace and a recursive estimator parameter design algorithm is then provided.Finally,a numerical example is conducted to demonstrate the effectiveness of the designed estimator.

Time-Varying Mesh Stiffness Calculation and Dynamic Modeling of Spiral Bevel Gear with Spalling Defects

Time-varying mesh stiffness(TVMS)is a vital internal excitation source for the spiral bevel gear(SBG)transmission system.Spalling defect often causes decrease in gear mesh stiffness and changes the dynamic characteristics of the gear system,which further increases noise and vibration.This paper aims to calculate the TVMS and establish dynamic model of SBG with spalling defect.In this study,a novel analytical model based on slice method is proposed to calculate the TVMS of SBG considering spalling defect.Subsequently,the influence of spalling defect on the TVMS is studied through a numerical simulation,and the proposed analytical model is verified by a finite element model.Besides,an 8-degrees-of-freedom dynamic model is established for SBG transmission system.Incorporating the spalling defect into TVMS,the dynamic responses of spalled SBG are analyzed.The numerical results indicate that spalling defect would cause periodic impact in time domain.Finally,an experiment is designed to verify the proposed dynamic model.The experimental results show that the spalling defect makes the response characterized by periodic impact with the rotating frequency of spalled pinion.

Effect analysis of friction and damping on anti-backlash gear based on dynamics model with time-varying mesh stiffness

A nonlinear model of anti-backlash gear with time-varying friction and mesh stiffness was proposed for the further study on dynamic characteristics of anti-backlash gear. In order to improve the model precision, applied force analysis was completed in detail, and single or double tooth meshing states of two gear pairs at any timing were determined according to the meshing characteristic of anti-backlash gear. The influences of friction and variations of damping ratio on dynamic transmission error were analyzed finally by numerical calculation and the results show that anti-backlash gear can increase the composite mesh stiffness comparing with the mesh stiffness of the normal gear pair. At the pitch points where the frictions change their signs, additional impulsive effects are observed. The width of impulsive in the same value of center frequency is wider than that without friction, and the amplitude is lower. When gear pairs mesh in and out, damping can reduce the vibration and impact.

Dynamic characteristics of the planetary gear train excited by time-varying meshing stiffness in the wind turbine

Wind power has attracted increasing attention as a renewable and clean energy. Gear fault frequently occurs under extreme environment and complex loads. The time-varying meshing stiffness is one of the main excitations. This study proposes a 5 degree-of-freedom torsional vibration model for the planetary gear system. The influence of some parameters(e.g., contact ratio and phase difference) is discussed under different conditions of a single teeth pair and double pairs of teeth. The impact load caused by the teeth face fault, ramped load induced by the complex wind conditions, and the harmonic excitation are investigated. The analysis of the time-varying meshing stiffness and the dynamic meshing force shows that the dynamic design under different loads can be made to avoid resonance, can provide the basis for the gear fault location of a wind turbine, and distinguish the fault characteristics from the vibration signals.

Dynamic Characteristics of Double-Helical Planetary Gear Sets Under Time-Varying Mesh Stiffness

Internal and external meshes are two of primary excitation sources which induce vibration while double-helical planetary gear sets are in transmission. Based on the analysis of tooth movement principle,three cases of mesh stiffness are derived via investigating the length of action lines,and catalogued in terms of β < β0,β = β0and β > β_0. The simulation demonstrates mesh stiffness between gear pairs performs as a trapezoid waveform( TW) and changes along with the line of action simultaneously,total mesh stiffness comes from the superposition of each engaged gear. While governing equations of motion contained 16 DOFs( degree of freedom) are constructed and effectively solved through the combination of numerical approaches. Comparing with sinusoidal waveform mesh stiffness( SW),the results show that dynamical factors and perturbation under the excitation of TW( β < β_0) are greater and remarkable than that from SW,with respect to the mean dynamic factors about 1. 51 and 1. 28,respectively. The fluctuation response between ring- planet( R- P) is stronger than sun-planet( S-P) which is also validated by both approach studies,frequency spectra analyses identifies larger distinct rotational resonance and more frequencies under TW excitation.

Efficient computation for dynamic responses of systems with time-varying characteristics

Based on Neumman series and epsilon-algorithm, an efficient computation for dynamic responses of systems with arbitrary time-varying characteristics is investigated. Avoiding the calculation for the inverses of the equivalent stiffness matrices in each time step, the computation effort of the proposed method is reduced compared with the full analysis of Newmark method. The validity and applications of the proposed method are illustrated by a 4-DOF spring-mass system with periodical time-varying stiffness properties and a truss structure with arbitrary time-varying lumped mass. It shows that good approximate results can be obtained by the proposed method compared with the responses obtained by the full analysis of Newmark method.

Stochastic synchronization for time-varying complex dynamical networks

This paper studies the stochastic synchronization problem for time-varying complex dynamical networks. This model is totally different from some existing network models. Based on the Lyapunov stability theory, inequality techniques, and the properties of the Weiner process, some controllers and adaptive laws are designed to ensure achieving stochastic synchronization of a complex dynamical network model. A sufficient synchronization condition is given to ensure that the proposed network model is mean-square stable. Theoretical analysis and numerical simulation fully verify the main results.

Time-varying nonlinear dynamics of a deploying piezoelectric laminated composite plate under aerodynamic force

Using Reddy’s high-order shear theory for laminated plates and Hamilton’s principle, a nonlinear partial differential equation for the dynamics of a deploying cantilevered piezoelectric laminated composite plate, under the combined action of aerodynamic load and piezoelectric excitation, is introduced. Two-degree of freedom(DOF)nonlinear dynamic models for the time-varying coefficients describing the transverse vibration of the deploying laminate under the combined actions of a first-order aerodynamic force and piezoelectric excitation were obtained by selecting a suitable time-dependent modal function satisfying the displacement boundary conditions and applying second-order discretization using the Galerkin method. Using a numerical method, the time history curves of the deploying laminate were obtained, and its nonlinear dynamic characteristics,including extension speed and different piezoelectric excitations, were studied. The results suggest that the piezoelectric excitation has a clear effect on the change of the nonlinear dynamic characteristics of such piezoelectric laminated composite plates. The nonlinear vibration of the deploying cantilevered laminate can be effectively suppressed by choosing a suitable voltage and polarity.

Eigenstructure assignment of lower-order dynamical compensatorsfor linear systems with unknown inputs

Presents a systematic design method of reduced order dynamical compensator via the parametric representations of eigenstructure assignment for linear system, which provides maximum degree of freedom, and can be easily used for the design of a linear system with unknown inputs under some conditions. Even when these conditions are not satisfied, the lower order dynamical compensator can also be designed under some relaxed conditions. Some examples illustrate that the method is neat, simple and effective.

Dynamic Positioning System Design for A Marine Vessel with Unknown Dynamics Subject to External Disturbances Including Wave Effect

In this paper, a new control system is proposed for dynamic positioning(DP) of marine vessels with unknown dynamics and subject to external disturbances. The control system is composed of a substructure for wave filtering and state estimation together with a nonlinear PD-type controller. For wave filtering and state estimation, a cascade combination of a modified notch filter and an estimation stage is considered. In estimation stage, a modified extended-state observer(ESO) is proposed to estimate vessel velocities and unknown dynamics. The main advantage of the proposed method is its robustness to model uncertainties and external disturbances and it does not require prior knowledge of vessel model parameters. Besides, the stability of the cascade structure is analyzed and input to state stability(ISS) is guaranteed. Later on, a nonlinear PD-type controller with feedforward of filtered estimated dynamics is utilized. Detailed stability analyses are presented for the closed-loop DP control system and global uniform ultimate boundedness is proved using large scale systems method. Simulations are conducted to evaluate the performance of the proposed method for wave filtering and state estimation and comparisons are made with two conventional methods in terms of estimation accuracy and the presence of uncertainties. Besides, comparisons are made in closed-loop control system to demonstrate the performance of the proposed method compared with conventional methods. The proposed control system results in better performance in the presence of uncertainties,external disturbance and even in transients when the vessel is subjected to sudden changes in environmental disturbances.

An Improved Dynamic Modelling for Exploring Ball Bearing Vibrations from Time-Varying Oil Film

Bearings are key components in rotating machinery,which is widely used in many fields,such as CNC machines,wind turbines and induction machines.The increasingly harsh operation environment can lead to wear and tear on raceways and reduce the precision and reliability of bearing or even machinery.Lubrication could relieve the wear to some degree,which is benefit to prolong the bearing’s life.Thus,investigation on the vibration responses under the influence of oil film is of great significance.However,for mechanism analysis,how to include the oil film into the bearing dynamic model affects the result and efficiency of solution.To address this problem,this study proposed a fast algorithm through load distribution and interpolation when calculating oil film stiffness and thickness during the solution of bearing vibration model.Analysis of oil film on vibration is carried out and a bearing test rig is designed to verify the proposed model.Numerical simulation result shows that rotational speed and load have vital effect on oil film and vibration.The experimental result is consistent with the simulation,which shows that the proposed model has a better performance on modeling bearing vibration and the method of considering oil film is reasonable.

Complex Modal Analysis for the Time-Variant Dynamical Problem of Rotating Pipe Conveying Fluid

A semi-analytical form of complex modal analysis is proposed for the time-variant dynamical problem of rotating pipe conveying fluid system.The complex mode superposition method is introduced for the dynamic analysis in the time and frequency domains,in which appropriate orthogonality conditions are constructed to decouple the time-variant equation of motion.Consequently,complex frequencies and modes of vibration are analytically formulated and the variations of frequencies and damping of the system are evaluated.Numerical time-variant example of rotating pipe conveying fluid illustrates the effectiveness and accuracy of this method.Furthermore,the proposed solution scheme is also applicable to other similar time-variant dynamical problems.

Dynamic Portfolio Choice under Time-Varying,Jumps,and Knight Uncertainty of Asset Return Process

By introducing a stochastic element to the double-jump diffusion framework to measure the Knight uncertainty of asset return process,the model of dynamic portfolio choice was built,which maximized the expected utility of terminal portfolio wealth.Through specifying the state function of uncertainty-aversion,it utilized the max-min method to derive the analytical solution of the model to study the effect of time-varying,jumps,and Knight uncertainty of asset return process on dynamic portfolio choice and their interactions.Results of comparative analysis show:the time-varying results in positive or negative intertemporal hedging demand of portfolio,which depends on the coefficient of investor's risk aversion and the correlation coefficient between return shift and volatility shift;the jumps in asset return overall reduce investor's demand for the risky asset,which can be enhanced or weakened by the jumps in volatility;due to the existing of Knight uncertainty,the investor avoids taking large position on risky asset,and improves portfolio's steady and immunity;the effects of the time-varying,jumps,and Knight uncertainty are interactive.

LEGENDRE SERIES SOLUTIONS FOR TIME-VARIATION DYNAMICS

In this topic, a new. approach to the analysis of time-variation dynamics is proposed by use of Legendre series expansion and Legendre integral operator matrix. The theoretical basis for effective solution of time-variation dynamics is therefore established, which is beneficial to further research of time-variation science.

Impulsive Synchronization of Nonlinear Stochastic Dynamical Networks with Time-Varying Delays

In this paper, an impulsive control strategy is proposed for a class of nonlinear stochastic dynamical networks with time-varying delay. Using the Lyapunov stability theory, a sufficient verifiable criterion for the exponential synchronization is derived analytically. Finally, a numerical simulation example is provided to verify the effectiveness of the proposed approach.

Dynamic Characteristics Analysis with Multi-Directional Coupling in a TBM Mainframe

The cutterhead of a full-face rock tunnel boring machine(TBM)is constantly subjected to varying impact and dynamic loads during tunneling processes,resulting in relatively large vibrations that could easily lead to fatigue cracking of the entire machine and a ect the tunneling performance and efficiency.To explore the dynamic characteristics of the TBM mainframe,a TBM from a water-diversion project is investigated in this research.According to the TBM vibration transmission route,an equivalent dynamic model of the TBM mainframe is established using the lumped-mass method in which the relevant dynamic parameters are solved.Additionally,the dynamic response characteristics of the TBM mainframe are analyzed.The results indicate that the vibration levels in three directions are approximately the same,the multi-directional vibration of the cutterhead is more intense than that of other components,and the vibration and external excitation exhibit identical change trends.A set of vibration field tests is performed to analyze the in situ dynamic responses of the mainframe and verify the correctness of the dynamic model.The theoretical and measured acceleration values of the TBM mainframe have the same magnitude,which proves the validity of the dynamic model and its solution.The aforementioned results provide an important theoretical value and practical significance for the design and assessment of the TBM mainframe.

Translational - torsional coupled model based nonlinear dynamic analysis of an NGW planetary gear train

This paper aims to investigate the nonlinear dynamic behaviors of an NGW planetary gear train with multi-clearances and manufacturing/assembling errors. For this purpose, an analytical translational- torsional coupled dynamic model is developed considering the effects of time-varying stiffness, gear backlashes and component errors. Based on the proposed model, the nonlinear differential equations of motion are derived and solved iteratively by the Runge-Kutta method. An NGW planetary gear reducer with three planets is taken as an example to analyze the effects of nonlinear factors. The results indicate that the backlashes induce complicated nonlinear dynamic behaviors in the gear train. With the increment of the backlashes, the gear system has experienced periodic responses, quasi-periodic response and chaos responses in sequence. When the planetary gear system is in a chaotic motion state, the vibration amplitude increases sharply, causing severe vibration and noise. The present study provides a fundamental basis for design and parameter optimization of NGW planetary gear trains.

Robust adaptive synchronization of uncertain and delayed dynamical complex networks with faulty network

This paper presents a new robust adaptive synchronization method for a class of uncertain dynamical complex networks with network failures and coupling time-varying delays. Adaptive schemes are proposed to adjust controller parameters for the faulty network compensations, as well as to estimate the upper and lower bounds of delayed state errors and perturbations to compensate the effects of delay and perturbation on-line without assuming symmetry or irreducibility of networks. It is shown that, through Lyapunov stability theory, distributed adaptive controllers con- structed by the adaptive schemes are successful in ensuring the achievement of asymptotic synchronization of networks in the present of faulty and delayed networks, and perturbation inputs. A Chua＇s circuit network example is finally given to show the effectiveness of the proposed synchronization criteria.

Dynamic load sharing behavior of transverse-torsional coupled planetary gear train with multiple clearances

A new nonlinear transverse-torsional coupled model with backlash and bearing clearance was proposed for planetary gear set. Meanwhile, sun gear and planet's eccentricity errors, static transmission error, and time-varying meshing stiffness were taken into consideration. The differential governing equations of motion were solved by employing variable step-size Rung-Kutta numerical integration method. The behavior of dynamic load sharing characteristics affected by the system parameters including input rate, sun gear's supporting stiffness and eccentricity error, planet's eccentricity error, sun gear's bearing clearance, backlashes of sun-planet and planet-ring meshes were investigated qualitatively and systematically. Some theoretical results are summarized at last which extend the current understanding of the dynamic load sharing behavior of planet gear train, enrich the related literature and provide references for the design of planetary gear train.

Excitation Prediction by Dynamic Transmission Error under Sliding Friction in Helical Gear System

Monte Carlo method was adopted to calculate the meshing error considering the manufacture error and assembly error of the meshing point along the time-varying contact line for helical gear pair. The flexural-torsion-axis dynamic model coupled was established under the tooth friction force and solved by the perturbation method to compute real dynamic tooth load. The change laws of the friction force and friction torque were obtained in a meshing period. The transmission error formulation was analyzed to introduce meshing excitations. The maximum dynamic transmission error, the maximum meshing force and the maximum dynamic factor were calculated under different speeds, external loads and damping factors. The conclusions can provide theoretical basis for the gear design especially in tooth profile correction.