Unscented Kalman filter for a low-cost GNSS/IMU-based mobile mapping application under demanding conditions

For the last two decades,low-cost Global Navigation Satellite System(GNSS)receivers have been used in various applications.These receivers are mini-size,less expensive than geodetic-grade receivers,and in high demand.Irrespective of these outstanding features,low-cost GNSS receivers are potentially poorer hardwares with internal signal processing,resulting in lower quality.They typically come with low-cost GNSS antenna that has lower performance than their counterparts,particularly for multipath mitigation.Therefore,this research evaluated the low-cost GNSS device performance using a high-rate kinematic survey.For this purpose,these receivers were assembled with an Inertial Measurement Unit(IMU)sensor,which actively transmited data on acceleration and orientation rate during the observation.The position and navigation parameter data were obtained from the IMU readings,even without GNSS signals via the U-blox F9R GNSS/IMU device mounted on a vehicle.This research was conducted in an area with demanding conditions,such as an open sky area,an urban environment,and a shopping mall basement,to examine the device’s performance.The data were processed by two approaches:the Single Point Positioning-IMU(SPP/IMU)and the Differential GNSS-IMU(DGNSS/IMU).The Unscented Kalman Filter(UKF)was selected as a filtering algorithm due to its excellent performance in handling nonlinear system models.The result showed that integrating GNSS/IMU in SPP processing mode could increase the accuracy in eastward and northward components up to 68.28%and 66.64%.Integration of DGNSS/IMU increased the accuracy in eastward and northward components to 93.02%and 93.03%compared to the positioning of standalone GNSS.In addition,the positioning accuracy can be improved by reducing the IMU noise using low-pass and high-pass filters.This application could still not gain the expected position accuracy under signal outage conditions.

Combining unscented Kalman filter and wavelet neural network for anti-slug

The stability of the subsea oil and gas production system is heavily influenced by slug flow. One successful method of managing slug flow is to use top valve control based on subsea pipeline pressure. However, the complexity of production makes it difficult to measure the pressure of subsea pipelines, and measured values are not always accessible in real-time. The research introduces a technique for integrating Unscented Kalman Filter (UKF) and Wavelet Neural Network (WNN) to estimate the state of subsea pipeline pressure using historical data and a state model. The proposed method treats multiphase flow transport as a nonlinear model, with a dynamic WNN serving as the state observer. To achieve real-time state estimation, the WNN is included into the UKF algorithm to create a WNN-based UKF state equation. Integrate WNN and UKF in a novel way to predict system state accurately. The simulated results show that the approach can efficiently predict the inlet pressure and manage the slug flow in real-time using the riser's top pressure, outlet flow and valve opening. This method of estimate can significantly increase the control effect.

Phase noise filtering and phase unwrapping method based on unscented Kalman filter

This paper presents a new phase unwrapping algorithm based on the unscented Kalman filter（UKF） for synthetic aperture radar（SAR） interferometry.This method is the result of combining an UKF with path-following strategy and an omni-directional local phase slope estimator.This technique performs simultaneously noise filtering and phase unwrapping along the high-quality region to the low-quality region,which is also able to avoid going directly through the noisy regions.In addition,phase slope is estimated directly from the sample frequency spectrum of the complex interferogram,by which the underestimation of phase slope is overcome.Simulation and real data processing results validate the effectiveness of the proposed method,and show a significant improvement with respect to the extended Kalman filtering（EKF） algorithm and some conventional phase unwrapping algorithms in some situations.

Fault tolerant navigation method for satellite based on information fusion and unscented Kalman filter

An effective autonomous navigation system for the integration of star sensor,infrared horizon sensor,magnetometer,radar altimeter and ultraviolet sensor is developed.The requirements of the integrated navigation system manager make optimum use of the various navigation sensors and allow rapid fault detection,isolation and recovery.The normal full fusion feedback method of federated unscented Kalman filter（UKF） cannot meet the needs of it.So a no-reset feedback federated Kalman filter architecture is developed and used in the autonomous navigation system.The minimal skew sigma points are chosen to improve the calculation speed.Simulation results are presented to demonstrate the advantages of the algorithm.These advantages include improved failure detection and correction,improved computational efficiency,and reliability.Additionally,its＇ accuracy is higher than that of the full fusion feedback method.

基于Lawden改进型方程的编队Unscented Kalman Filter滤波估计

通过改进卫星编队的Lawden方程得到非线性相对运动方程,称为Lawden改进型方程,使其更加近似于编队运行环境。通过该非线性方程,在编队相对导航研究中,以EKF滤波方法为参考分析,采用适合非线性系统的UKF(Unscented Kalman Filter)滤波方法对编队的状态进行滤波估计。通过仿真实验,结果表明采用UKF滤波方法的编队状态估计精度明显优于采用EKF滤波方法得到的估计精度,其中相对距离估计精度可以提高70%左右,相对速率估计精度可以提高25%左右,在工程应用中具有一定的参考利用价值。

Adaptive unscented Kalman filter for parameter and state estimation of nonlinear high-speed objects

An adaptive unscented Kalman filter （AUKF） and an augmented state method are employed to estimate the timevarying parameters and states of a kind of nonlinear high-speed objects. A strong tracking filter is employed to improve the tracking ability and robustness of unscented Kalman filter （UKF） when the process noise is inaccuracy, and wavelet transform is used to improve the estimate accuracy by the variance of measurement noise. An augmented square-root framework is utilized to improve the numerical stability and accuracy of UKF. Monte Carlo simulations and applications in the rapid trajectory estimation of hypersonic artillery shells confirm the effectiveness of the proposed method.

Modified unscented Kalman filter using modified filter gain and variance scale factor for highly maneuvering target tracking

To improve the low tracking precision caused by lagged filter gain or imprecise state noise when the target highly maneuvers, a modified unscented Kalman filter algorithm based on the improved filter gain and adaptive scale factor of state noise is presented. In every filter process, the estimated scale factor is used to update the state noise covariance Qk, and the improved filter gain is obtained in the filter process of unscented Kalman filter （UKF） via predicted variance Pk｜k-1, which is similar to the standard Kalman filter. Simulation results show that the proposed algorithm provides better accuracy and ability to adapt to the highly maneuvering target compared with the standard UKF.

Unscented extended Kalman filter for target tracking

A new method of unscented extended Kalman filter （UEKF） for nonlinear system is presented. This new method is a combination of the unscented transformation and the extended Kalman filter （EKF）. The extended Kalman filter is similar to that in a conventional EKF. However, in every running step of the EKF the unscented transformation is running, the deterministic sample is caught by unscented transformation, then posterior mean of non- lineadty is caught by propagating, but the posterior covariance of nonlinearity is caught by linearizing. The accuracy of new method is a little better than that of the unscented Kalman filter （UKF）, however, the computational time of the UEKF is much less than that of the UKF.

A new real-time eye tracking based on nonlinear unscented Kalman filter for monitoring driver fatigue

A new scheme for driver fatigue detection is presented, which is based on the nonlinear unscented Kalman filter and eye tracking. Assuming a probability distribution than to approximate an arbitrary nonlinear function or transformation, eye nonlinear tracking can be achieved using an unscented transformation (UT), which adopts a set of deterministic sigma points to match the posterior probability density function of the eye movement. Driver fatigue can be detected using the percentage of eye closure (PERCLOS) framework in a realistic driving condition after the eye nonlinear tracking. This system was tested adequately in realistic driving environments with subjects of different genders, with/without glasses, in day/night driving, being commercial/noncommercial drivers, in continuous driving time, and under different road conditions. The last experimental results show that the proposed method not only improves the robustness for nonlinear eye tracking, but also can provide more accurate estimation than the traditional Kalman filter.

Airship aerodynamic model estimation using unscented Kalman filter

An airship model is made-up of aerostatic,aerodynamic,dynamic,and propulsive forces and torques.Besides others,the computation of aerodynamic forces and torques is difficult.Usually,wind tunnel experimentation and potential flow theory are used for their calculations.However,the limitations of these methods pose difficulties in their accurate calculation.In this work,an online estimation scheme based on unscented Kalman filter(UKF)is proposed for their calculation.The proposed method introduces six auxiliary states for the complete aerodynamic model.UKF uses an extended model and provides an estimate of a complete state vector along with auxiliary states.The proposed method uses the minimum auxiliary state variables for the approximation of the complete aerodynamic model that makes it computationally less intensive.UKF estimation performance is evaluated by developing a nonlinear simulation environment for University of Engineering and Technology,Taxila(UETT)airship.Estimator performance is validated by performing the error analysis based on estimation error and 2-σ uncertainty bound.For the same problem,the extended Kalman filter(EKF)is also implemented and its results are compared with UKF.The simulation results show that UKF successfully estimates the forces and torques due to the aerodynamic model with small estimation error and the comparative analysis with EKF shows that UKF improves the estimation results and also it is more suitable for the under-consideration problem.

Unscented Kalman filter for SINS alignment

In order to improve the filter accuracy for the nonlinear error model of strapdown inertial navigation system (SINS) alignment, Unscented Kalman Filter (UKF) is presented for simulation with stationary base and moving base of SINS alignment. Simulation results show the superior performance of this approach when compared with classical suboptimal techniques such as extended Kalman filter in eases of large initial misalignment. The UKF has good performance in case of small initial misalignment.

Unscented Transformation Based Robust Kalman Filter and Its Applications in Fermentation Process

State estimation is the precondition and foundation of a bioprocess monitoring and optimal control. However,there are many difficulties in dealing with a non-linear system,such as the instability of process, un-modeled dynamics,parameter sensitivity,etc.This paper discusses the principles and characteristics of three different approaches,extended Kalman filters,strong tracking filters and unscented transformation based Kalman filters.By introducing the unscented transformation method and a sub-optimal fading factor to correct the prediction error covariance,an improved Kalman filter,unscented transformation based robust Kalman filter,is proposed. The performance of the algorithm is compared with the strong tracking filter and unscented transformation based Kalman filter and illustrated in a typical case study for glutathione fermentation process.The results show that the proposed algorithm presents better accuracy and stability on the state estimation in numerical calculations.

MLP training in a self-organizing state space model using unscented Kalman particle filter

Many Bayesian learning approaches to the multi-layer perceptron （MLP） parameter optimization have been proposed such as the extended Kalman filter （EKF）. This paper uses the unscented Kalman particle filter （UPF） to train the MLP in a self- organizing state space （SOSS） model. This involves forming augmented state vectors consisting of all parameters （the weights of the MLP） and outputs. The UPF is used to sequentially update the true system states and high dimensional parameters that are inherent to the SOSS moder for the MLP simultaneously. Simulation results show that the new method performs better than traditional optimization methods.

Sampling strong tracking nonlinear unscented Kalman filter and its application in eye tracking

The unscented Kalman filter is a developed well-known method for nonlinear motion estimation and tracking. However, the standard unscented Kalman filter has the inherent drawbacks, such as numerical instability and much more time spent on calculation in practical applications. In this paper, we present a novel sampling strong tracking nonlinear unscented Kalman filter, aiming to overcome the difficulty in nonlinear eye tracking. In the above proposed filter, the simplified unscented transform sampling strategy with n＋ 2 sigma points leads to the computational efficiency, and suboptimal fading factor of strong tracking filtering is introduced to improve robustness and accuracy of eye tracking. Compared with the related unscented Kalman filter for eye tracking, the proposed filter has potential advantages in robustness, convergence speed, and tracking accuracy. The final experimental results show the validity of our method for eye tracking under realistic conditions.

On-line Estimation in Fed-batch Fermentation Process Using State Space Model and Unscented Kalman Filter

On-line estimation of unmeasurable biological variables is important in fermentation processes,directly influencing the optimal control performance of the fermentation system as well as the quality and yield of the targeted product.In this study,a novel strategy for state estimation of fed-batch fermentation process is proposed.By combining a simple and reliable mechanistic dynamic model with the sample-based regressive measurement model,a state space model is developed.An improved algorithm,swarm energy conservation particle swarm optimization(SECPSO) ,is presented for the parameter identification in the mechanistic model,and the support vector machines(SVM) method is adopted to establish the nonlinear measurement model.The unscented Kalman filter(UKF) is designed for the state space model to reduce the disturbances of the noises in the fermentation process.The proposed on-line estimation method is demonstrated by the simulation experiments of a penicillin fed-batch fermentation process.

Stochastic stability of the derivative unscented Kalman filter

This is the second of two consecutive papers focusing on the filtering algorithm for a nonlinear stochastic discretetime system with linear system state equation. The first paper established a derivative unscented Kalman filter（DUKF） to eliminate the redundant computational load of the unscented Kalman filter（UKF） due to the use of unscented transformation（UT） in the prediction process. The present paper studies the error behavior of the DUKF using the boundedness property of stochastic processes. It is proved that the estimation error of the DUKF remains bounded if the system satisfies certain conditions. Furthermore, it is shown that the design of the measurement noise covariance matrix plays an important role in improvement of the algorithm stability. The DUKF can be significantly stabilized by adding small quantities to the measurement noise covariance matrix in the presence of large initial error. Simulation results demonstrate the effectiveness of the proposed technique.

Blind adaptive constrained constant modulus algorithms based on unscented Kalman filter for beamforming

This work proposes constrained constant modulus unscented Kalman filter(CCM-UKF) algorithm and its low-complexity version called reduced-rank constrained constant modulus unscented Kalman filter(RR-CCM-UKF) algorithm for blind adaptive beamforming. In the generalized sidelobe canceller(GSC) structure, the proposed algorithms are devised according to the CCM criterion. Firstly, the cost function of the constrained optimization problem is transformed to suit the Kalman filter-style state space model. Then, the optimum weight vector of the beamformer can be estimated by using the recursive formulas of UKF. In addition, the a priori parameters of UKF(system and measurement noises) are processed adaptively in the implementation. Simulation results demonstrate that the proposed algorithms outperform the existing methods in terms of convergence speeds, output signal-tointerference-plus-noise ratios(SINRs), mean-square deviations(MSDs) and robustness against steering mismatch.

Enhanced multi-baseline unscented Kalman filtering phase unwrapping algorithm

This paper presents an enhanced multi-baseline phase unwrapping algorithm by combining an unscented Kalman filter with an enhanced joint phase gradient estimator based on the amended matrix pencil model, and an optimal path-following strategy based on phase quality estimate function. The enhanced joint phase gradient estimator can accurately and effectively extract the phase gradient information of wrapped pixels from noisy interferograms, which greatly increases the performances of the proposed method. The optimal path-following strategy ensures that the proposed algorithm simultaneously performs noise suppression and phase unwrapping along the pixels with high-reliance to the pixels with low-reliance. Accordingly, the proposed algorithm can be predicted to obtain better results, with respect to some other algorithms, as will be demonstrated by the results obtained from synthetic data.

Comparison of linear and nonlinear aerodynamic parameter estimation approaches for an unmanned aerial vehicle using unscented Kalman filter

Aerodynamic parameter estimation provides an effective way for aerospace system modeling using measured data from flight tests, especially for the purpose of developing elaborate simulation environments and designing control systems of unmanned aerial vehicle （UAV） with short design cycles and reduced cost. However, parameter identification of airplane dynamics by nonlinear mod- els is complicated because of the noisy and biased sensor measurements. Using linear models for system identification is an alternative way if the fidelity can be guaranteed, as control design procedures are better established in linear systems. This paper considers the application and comparison of linear as well as nonlinear aerodynamic parameter estimation approaches of an UAV using unscented Kalman filter （UKF）. It also highlights the degree of deterioration of the linear model in the UKF identification process. The results show that both the linear and nonlinear methodologies can accurately estimate the control system design. Furthermore, considering loss of accuracy to be negligible, the linear model can be employed for control design of the UAV as presented here.

Control of epileptiform spikes based on nonlinear unscented Kalman filter

A new control strategy based on nonlinear unscented Kalman filter （UKF） is proposed for a neural mass model that serves as a model for simulating real epileptiform stereo-electroeneephalographic （SEEG） signals. The UKF is used as an observer to estimate the state from the noisy measurement because it has been proved to be effective for state estimation of nonlinear systems. A UKF controller is constructed via the estimated state and is illustrated to be effective for epileptiform spikes suppression of aforementioned model by numerical simulations.