The reduction of Ni(Ⅱ) is an irreversible reaction and La(Ⅲ) cannot be reduced to La directly but be co-deposited inductively in the present of Ni(Ⅱ) in the Acetamide-Urea-NaBr molten salt electrolyte at 353 K. The...The reduction of Ni(Ⅱ) is an irreversible reaction and La(Ⅲ) cannot be reduced to La directly but be co-deposited inductively in the present of Ni(Ⅱ) in the Acetamide-Urea-NaBr molten salt electrolyte at 353 K. The uncrystallized alloy film of La-Ni is obtained by potentiostatic electrolysis, and the amount of La grows with increasing cathodic overpotential, molar ratios of La(Ⅲ) to Ni(Ⅱ) and the electrolysis time. The maximum amount of La in alloy film reaches to 78.81% (mass fraction) in present study.展开更多
The Ni-La alloy was electro-deposited in urea-NaBr melt. The codeposition behavior and effect of the cathodic current density on the coating composition were examined. As a result, lanthanum codeposited with nickel to...The Ni-La alloy was electro-deposited in urea-NaBr melt. The codeposition behavior and effect of the cathodic current density on the coating composition were examined. As a result, lanthanum codeposited with nickel to form Ni-La alloy under the inducement effect of nickel. With the increase of the cathodic current density, the content of lanthanum of the deposit rose at first, then decreased, and reached the maximal value (10.3%(atom fraction)) at the current density 15 mA·cm-2. The crystallization behavior of Ni89.7La10.3 coating was investigated by means of differential scanning calorimetry and X-ray diffraction. The structure of Ni89.7La10.3 as-plated coating was amorphous phase. The amorphous phase was converted into center cubic close packed Ni-La (Fm3m) solid solution at 469.8 ℃. The electro-catalytic activity of hydrogen evolution of Ni89.7La10.3 coating was studied using electrochemical experiments, the results showed that the electro-catalytic activity of hydrogen evolution of Ni89.7La10.3 coating was better than that of nickel.展开更多
Electroreduction of Ni(Ⅱ) to metallic Ni in urea NaBr melt at 373 K is irreversible in one step. Gd(Ⅲ) is not reduced to Gd alone, but can be inductively codeposited with Ni(Ⅱ). The amorphous Gd Ni alloy films were...Electroreduction of Ni(Ⅱ) to metallic Ni in urea NaBr melt at 373 K is irreversible in one step. Gd(Ⅲ) is not reduced to Gd alone, but can be inductively codeposited with Ni(Ⅱ). The amorphous Gd Ni alloy films were obtained by potentiostatic electrolysis and galvanostatic electrolysis. With the cathode potential shift to negative direction and the increase of current density, the content of gadolinium in the alloy increases first, and then drops down gradually. The molar ratio of Gd(Ⅲ) to Ni(Ⅱ) and the time also influence the content of Gd. Crystalline GdNi 3 alloy was obtained after heat treatment of the deposit. [展开更多
The cyclic voltammetry, chronopotentiometry and chronoamperometry were used to study the behaviors of Fe 2+ on Pt, Cu, Ag and Ti electrodes in urea NaBr melt at 373 K. Electroreduction of Fe 2+ to metallic ...The cyclic voltammetry, chronopotentiometry and chronoamperometry were used to study the behaviors of Fe 2+ on Pt, Cu, Ag and Ti electrodes in urea NaBr melt at 373 K. Electroreduction of Fe 2+ to metallic Fe is irreversible in one step. The exchange current density determined on Ti electrode is 2 68×10 -5 A·cm -2 . Sm 3+ does not reduce to Sm alone, but can be inductively codeposited with Fe 2+ . Sm Fe alloy film contained over 90% Sm (mass fraction) can be obtained by potentiostatic electrolysis and galvanostatic electrolysis on Cu substrate. The Sm content in the alloy is related to the cathode potential, current density and the Sm 3+ /Fe 2+ molar ratio. The surface state of the Sm Fe deposit was studied by scanning electron microscopy.展开更多
The kinetics of La-Co alloy film in acetamide-urea-NaBr molten salt electrolyte at 353K was investigated. It is shown that the reduction of Co(Ⅱ) to Co is irreversible reaction with the transfer coefficient of 0.28...The kinetics of La-Co alloy film in acetamide-urea-NaBr molten salt electrolyte at 353K was investigated. It is shown that the reduction of Co(Ⅱ) to Co is irreversible reaction with the transfer coefficient of 0.28 and the diffusion coefficient of 7.46×10 -5 cm 2/s. While La(Ⅲ) cannot be reduced to La directly; but can be codeposited with cobalt. The content of La in the uncrystallized La-Co alloy film increases with increasing cathodic overpotential, molar ratio of La 3+ to Co 2+ and electrolysis time as well, and reaches the maximum of 66.32%.展开更多
Electroreduction of Co(Ⅱ) to metallic Co in acetamide-urea-NaBr melt at 353 K is irreversible in one step. Gd(Ⅲ) is not reduced to Gd alone, but can be inductively codeposited with Co(Ⅱ). The amorphous Gd-Co alloy ...Electroreduction of Co(Ⅱ) to metallic Co in acetamide-urea-NaBr melt at 353 K is irreversible in one step. Gd(Ⅲ) is not reduced to Gd alone, but can be inductively codeposited with Co(Ⅱ). The amorphous Gd-Co alloy films were obtained by potentiostatic electrolysis. With the cathode potential shifting to negative direction, the content of gadolinium in the alloy increases and can get to 65.89% (mass fraction). The additive of Na 2EDTA can make the diameter of the particles of crystalline alloy smaller and change the shape of particles.展开更多
在353K的乙酰胺-尿素-N aB r熔体中,P t、Cu电极上,Co(Ⅱ)+2e→Co(0)是一步完全不可逆反应,测得0.060m o l.L-1CoC l2-乙酰胺-尿素-N aB r中,Co(Ⅱ)在P t上,传递系数α=0.28,扩散系数D0=4.68×10-5cm2.-s 1,Cu上α=0.28,D0=4.06...在353K的乙酰胺-尿素-N aB r熔体中,P t、Cu电极上,Co(Ⅱ)+2e→Co(0)是一步完全不可逆反应,测得0.060m o l.L-1CoC l2-乙酰胺-尿素-N aB r中,Co(Ⅱ)在P t上,传递系数α=0.28,扩散系数D0=4.68×10-5cm2.-s 1,Cu上α=0.28,D0=4.06×1-0 7cm2.-s 1。G d(Ⅲ)不能单独还原为G d(0),但可以被Co(Ⅱ)诱导共沉积。由恒电位电解法得到非晶态的G d-Co合金,G d的含量随阴极电位的负移,G d(Ⅲ)/N i(Ⅱ)摩尔比增大以及电解时间延长而增大。展开更多
文摘The reduction of Ni(Ⅱ) is an irreversible reaction and La(Ⅲ) cannot be reduced to La directly but be co-deposited inductively in the present of Ni(Ⅱ) in the Acetamide-Urea-NaBr molten salt electrolyte at 353 K. The uncrystallized alloy film of La-Ni is obtained by potentiostatic electrolysis, and the amount of La grows with increasing cathodic overpotential, molar ratios of La(Ⅲ) to Ni(Ⅱ) and the electrolysis time. The maximum amount of La in alloy film reaches to 78.81% (mass fraction) in present study.
基金the Natural Science Foundation of Fujian Province of China (E0640004)
文摘The Ni-La alloy was electro-deposited in urea-NaBr melt. The codeposition behavior and effect of the cathodic current density on the coating composition were examined. As a result, lanthanum codeposited with nickel to form Ni-La alloy under the inducement effect of nickel. With the increase of the cathodic current density, the content of lanthanum of the deposit rose at first, then decreased, and reached the maximal value (10.3%(atom fraction)) at the current density 15 mA·cm-2. The crystallization behavior of Ni89.7La10.3 coating was investigated by means of differential scanning calorimetry and X-ray diffraction. The structure of Ni89.7La10.3 as-plated coating was amorphous phase. The amorphous phase was converted into center cubic close packed Ni-La (Fm3m) solid solution at 469.8 ℃. The electro-catalytic activity of hydrogen evolution of Ni89.7La10.3 coating was studied using electrochemical experiments, the results showed that the electro-catalytic activity of hydrogen evolution of Ni89.7La10.3 coating was better than that of nickel.
文摘Electroreduction of Ni(Ⅱ) to metallic Ni in urea NaBr melt at 373 K is irreversible in one step. Gd(Ⅲ) is not reduced to Gd alone, but can be inductively codeposited with Ni(Ⅱ). The amorphous Gd Ni alloy films were obtained by potentiostatic electrolysis and galvanostatic electrolysis. With the cathode potential shift to negative direction and the increase of current density, the content of gadolinium in the alloy increases first, and then drops down gradually. The molar ratio of Gd(Ⅲ) to Ni(Ⅱ) and the time also influence the content of Gd. Crystalline GdNi 3 alloy was obtained after heat treatment of the deposit. [
文摘The cyclic voltammetry, chronopotentiometry and chronoamperometry were used to study the behaviors of Fe 2+ on Pt, Cu, Ag and Ti electrodes in urea NaBr melt at 373 K. Electroreduction of Fe 2+ to metallic Fe is irreversible in one step. The exchange current density determined on Ti electrode is 2 68×10 -5 A·cm -2 . Sm 3+ does not reduce to Sm alone, but can be inductively codeposited with Fe 2+ . Sm Fe alloy film contained over 90% Sm (mass fraction) can be obtained by potentiostatic electrolysis and galvanostatic electrolysis on Cu substrate. The Sm content in the alloy is related to the cathode potential, current density and the Sm 3+ /Fe 2+ molar ratio. The surface state of the Sm Fe deposit was studied by scanning electron microscopy.
文摘The kinetics of La-Co alloy film in acetamide-urea-NaBr molten salt electrolyte at 353K was investigated. It is shown that the reduction of Co(Ⅱ) to Co is irreversible reaction with the transfer coefficient of 0.28 and the diffusion coefficient of 7.46×10 -5 cm 2/s. While La(Ⅲ) cannot be reduced to La directly; but can be codeposited with cobalt. The content of La in the uncrystallized La-Co alloy film increases with increasing cathodic overpotential, molar ratio of La 3+ to Co 2+ and electrolysis time as well, and reaches the maximum of 66.32%.
文摘Electroreduction of Co(Ⅱ) to metallic Co in acetamide-urea-NaBr melt at 353 K is irreversible in one step. Gd(Ⅲ) is not reduced to Gd alone, but can be inductively codeposited with Co(Ⅱ). The amorphous Gd-Co alloy films were obtained by potentiostatic electrolysis. With the cathode potential shifting to negative direction, the content of gadolinium in the alloy increases and can get to 65.89% (mass fraction). The additive of Na 2EDTA can make the diameter of the particles of crystalline alloy smaller and change the shape of particles.
