An experimental procedure was designed to monitor the preform thickness change real-time throughout the vacuum assisted resin infusion( VARI) process. Two kinds of liquid with different viscosity were infused with dif...An experimental procedure was designed to monitor the preform thickness change real-time throughout the vacuum assisted resin infusion( VARI) process. Two kinds of liquid with different viscosity were infused with different post-filling time. The variation of the part thickness during the VARI process was studied. And the effect of the post-filling time on the part thickness was investigated.The results indicate that the compaction behavior of the preform can be divided into three stages,and the fiber volume fraction varies with the post-filling time in a similar sinusoid form. In addition,the post-filling should be overtime for the greatest fiber volume fraction,and when the resin is infused with higher viscosity,the greatest fiber volume fraction is higher.展开更多
The most common process to manufacture advanced composites is the costly autoclave.One of the out-of-autoclave alternatives is the low-cost vacuum assisted resin infusion(VARI)which produces quality parts with less po...The most common process to manufacture advanced composites is the costly autoclave.One of the out-of-autoclave alternatives is the low-cost vacuum assisted resin infusion(VARI)which produces quality parts with less pollution.Epoxy resin is a widely used composite matrix resin,but its high flammability limits its use as interior composite parts for vehicles.The usual flame retardant for epoxy involves halogen,which is effective but has high smoke toxicity.As a result,halogen-free flame retardant epoxy resin systems become dominant.In this paper,phosphorus flame retardant was combined with benzoxazine(BOZ)to produce synergistic effect and achieve satisfactory flame retardance,as well as mechanical improvement for the epoxy resin.Differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),thermal gravitational analysis(TGA),the cone calorimeter(CC),and limiting oxygen index(LOI)were used to characterize the resins.The results showed significant improvement on the flame retardance of the synergistically modified resins.Specifically,the carbon residue increased by 113.6%,and the char thickness increased by 6 to 7 times,compared to those of the flammable benchmark resin.The LOI reached 33 and passed the UL94 V-0 vertical burn rating.The modified resins also exhibited adequate stability and viscosity suitable for VARI processes.展开更多
Co-cured vacuum assisted resin infusion process(co-VARI process),which combined vacuum assisted resin infusion(VARI)with prepreg vacuum bag only process(VBO),was adopted to fabricate T-shaped stiffened skin with non-c...Co-cured vacuum assisted resin infusion process(co-VARI process),which combined vacuum assisted resin infusion(VARI)with prepreg vacuum bag only process(VBO),was adopted to fabricate T-shaped stiffened skin with non-crimp fabric(NCF)stiffener and prepreg skin.During compaction stage of co-VARI process,prepreg resin impregnated fiber fabric under elevated temperature and vacuum pressure.This phenomenon was characterized by fluorescent micrographs with different holding temperature and time.Its influences on processing quality and mechanical performance for co-VARI stiffened skin with different filler materials at triangular region were further analyzed by optical micrographs and pull-off test,respectively.The results show that increasing holding temperature and prolonging holding time can promote prepreg resin impregnation in fiber fabric.Moderate prepreg resin impregnation is favorable to reduce resin rich region and increase fiber volume fraction at prepreg-fabric interface.Moreover,prepreg resin impregnation effect plays significant roles on pull-off performance for co-VARI stiffened skin with fabric filler but has negligible influences on specimens with prepreg filler.In addition,compared with stiffened skin with fabric filler,superior processing quality and pull-off performances are achieved for co-VARI stiffened skin with prepreg core filler.These results are helpful to optimize processing procedures and fabricate composite structure by coVARI process.展开更多
基金The Fundamental Research Funds for the Central Universities,China(No.2232014D3-26)Innovation Fund of the Chinese National Engineering Research Center,China(No.SAM C14-JS-15-049)Science and Technology Commission of Shanghai Municipality,China(No.14DZ1100402)
文摘An experimental procedure was designed to monitor the preform thickness change real-time throughout the vacuum assisted resin infusion( VARI) process. Two kinds of liquid with different viscosity were infused with different post-filling time. The variation of the part thickness during the VARI process was studied. And the effect of the post-filling time on the part thickness was investigated.The results indicate that the compaction behavior of the preform can be divided into three stages,and the fiber volume fraction varies with the post-filling time in a similar sinusoid form. In addition,the post-filling should be overtime for the greatest fiber volume fraction,and when the resin is infused with higher viscosity,the greatest fiber volume fraction is higher.
文摘The most common process to manufacture advanced composites is the costly autoclave.One of the out-of-autoclave alternatives is the low-cost vacuum assisted resin infusion(VARI)which produces quality parts with less pollution.Epoxy resin is a widely used composite matrix resin,but its high flammability limits its use as interior composite parts for vehicles.The usual flame retardant for epoxy involves halogen,which is effective but has high smoke toxicity.As a result,halogen-free flame retardant epoxy resin systems become dominant.In this paper,phosphorus flame retardant was combined with benzoxazine(BOZ)to produce synergistic effect and achieve satisfactory flame retardance,as well as mechanical improvement for the epoxy resin.Differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),thermal gravitational analysis(TGA),the cone calorimeter(CC),and limiting oxygen index(LOI)were used to characterize the resins.The results showed significant improvement on the flame retardance of the synergistically modified resins.Specifically,the carbon residue increased by 113.6%,and the char thickness increased by 6 to 7 times,compared to those of the flammable benchmark resin.The LOI reached 33 and passed the UL94 V-0 vertical burn rating.The modified resins also exhibited adequate stability and viscosity suitable for VARI processes.
文摘Co-cured vacuum assisted resin infusion process(co-VARI process),which combined vacuum assisted resin infusion(VARI)with prepreg vacuum bag only process(VBO),was adopted to fabricate T-shaped stiffened skin with non-crimp fabric(NCF)stiffener and prepreg skin.During compaction stage of co-VARI process,prepreg resin impregnated fiber fabric under elevated temperature and vacuum pressure.This phenomenon was characterized by fluorescent micrographs with different holding temperature and time.Its influences on processing quality and mechanical performance for co-VARI stiffened skin with different filler materials at triangular region were further analyzed by optical micrographs and pull-off test,respectively.The results show that increasing holding temperature and prolonging holding time can promote prepreg resin impregnation in fiber fabric.Moderate prepreg resin impregnation is favorable to reduce resin rich region and increase fiber volume fraction at prepreg-fabric interface.Moreover,prepreg resin impregnation effect plays significant roles on pull-off performance for co-VARI stiffened skin with fabric filler but has negligible influences on specimens with prepreg filler.In addition,compared with stiffened skin with fabric filler,superior processing quality and pull-off performances are achieved for co-VARI stiffened skin with prepreg core filler.These results are helpful to optimize processing procedures and fabricate composite structure by coVARI process.
