Combination of a reaction cell and an ultra-high vacuum system for the in situ preparation and characterization of a model catalyst

An in-depth understanding of the structure-activity relationship between the surface structure,chemical composition,adsorption and desorption of molecules,and their reaction activity and selectivity is necessary for the rational design of high-performance catalysts.Herein,we present a method for studying catalytic mechanisms using a combination of in situ reaction cells and surface science techniques.The proposed system consists of four parts:preparation chamber,temperatureprogrammed desorption(TPD)chamber,quick load-lock chamber,and in situ reaction cell.The preparation chamber was equipped with setups based on the surface science techniques used for standard sample preparation and characterization,including an Ar+sputter gun,Auger electron spectrometer,and a low-energy electron diffractometer.After a well-defined model catalyst was prepared,the sample was transferred to a TPD chamber to investigate the adsorption and desorption of the probe molecule,or to the reaction cell,to measure the catalytic activity.A thermal desorption experiment for methanol on a clean Cu(111)surface was conducted to demonstrate the functionality of the preparation and TPD chambers.Moreover,the repeatability of the in situ reaction cell experiment was verified by CO_(2) hydrogenation on the Ni(110)surface.At a reaction pressure of 800 Torr at 673 K,turnover frequencies for the methanation reaction and reverse water-gas shift reaction were 0.15 and 7.55 Ni atom^(-1) s^(-1),respectively.

CSRm Ultra-High Vacuum System

The new accelerator project （ HIRFL-CSR ） constructed at the Heavy Ion Research Facility in Lanzhou （HIRFL） is approaching completion. It is a multipurpose cooler-storage-ring system, consisting of a maim ring （CSRm）, an experimental ring （CSRe） and two transfer beam lines. The UHV system of CSRm is the most representative subsystem in the project. To minimize the beam loss due to charge exchange of the heavy ions with the residual gas molecules, the pressure of the CSRm vacuum system should reach 3.5 × 10^-9 Pa （N2 equivalent） and the pressure of 8 × 10^-10 Pa is expected for very heavy ion such as uranium to make its lifetime longer than 50 s in the ring. Now, the vacuum system of CSRm has been completed and a pressure less than 5 × 10^-10 Pa has been obtained. In this paper the layout of the CSRm vacuum system, the vacuum equipment in CSRm, the treatment method for the CSRm vacuum chambers, and the installation and operation of the system will be reported.

Effect of Injection Velocity on Structure Part Characteristic in A50 Die Casting Process with High Vacuum System

When diecasting large and thin Mg alloy parts,material defects occur,which include porosity,nonuniform mechanical properties,irregular surfaces,and incomplete filling.To resolve these problems,it is necessary to have uniform injection velocities and temperatures as well as control the melt.This study investigated the feasibility of producing large and thin components using a die caster by attaching a high vacuum system.In particular,the effects of injection velocity on surface quality and the mechanical properties of the products were investigated.Hence,an injection velocity scheme and a die structure capable of casting in a vacuum were proposed.As a result,it was found that the critical low injection velocity was 0.2 m/s to produce large thin Mg alloy structures having good mechanical properties.

Seal Structure of Vacuum System for CSR

To reach the design parameter of CSR, vacuum system (≤3.5x10^(-9) Pa), besides the high requirement for quality of the material and vacuum sanitation of the vacuum cells, the seal function is the most important. All cells of vacuum system for CSR are limited by the situations and rooms of gap of magnets, radio frequency system, diagnostic devices and others, and must meet the assemble and disassemble requirements of every devices.

Calculation of a Multi-Differential Vacuum System for Gas-Filled Recoil Spectrometer

A new gas-filled recoil spectrometer device will be built as a terminal of HIAF which will be used for a new element search with Z>119 and physics studies of the super-heavy nuclei.The vacuum pressure inside the terminal is 200 Pa when filled with helium gas however the vacuum pressure of main system is lower than 1106Pa,therefore it is necessary to design a differential vacuum system for vacuum transition more than eight orders of magnitude.Herein,a calculation of five-stage differential system is presented.

Work Summary of HIAF Vacuum System in 2022

Some significant progress has been made for HIAF vacuum system in 2022,such as the development of the ultra-thin wall XHV chamber with titanium alloy lining(a key technology of HIAF),the construction of BRing demonstration section in Tianshui,the procurement of most vacuum acquisition equipment,and so on.

Vacuum System Design for HFRS

HIAF Fragment Separator(HFRS)is the only beam line that connected Booster Ring(BRing)and Spectrometer Ring(SRing)in the HIAF and used to transfer both the primary ion beams and secondary radioactive beams.The beam passed once in HFRS so low vacuum degree was required.But HFRS connects with extremely high vacuum systems of BRing and SRing,so it is related to the gradual transition of pressure,the vacuum pressure can’t be too high.Taking into account the above situation,the vacuum degree of HFRS should be better than 1×10^(−7)mb.

INTERFACE BEHAVIOR AND DECAY RATES OF COMPRESSIBLE NAVIER-STOKES SYSTEM WITH DENSITY-DEPENDENT VISCOSITY AND A VACUUM

In this paper,we study the one-dimensional motion of viscous gas near a vacuum,with the gas connecting to a vacuum state with a jump in density.The interface behavior,the pointwise decay rates of the density function and the expanding rates of the interface are obtained with the viscosity coefficientμ(ρ)=ρ^(α)for any 0<α<1;this includes the timeweighted boundedness from below and above.The smoothness of the solution is discussed.Moreover,we construct a class of self-similar classical solutions which exhibit some interesting properties,such as optimal estimates.The present paper extends the results in[Luo T,Xin Z P,Yang T.SIAM J Math Anal,2000,31(6):1175-1191]to the jump boundary conditions case with density-dependent viscosity.

A molecular insight into coke formation process of vacuum residue in thermal cracking reaction

Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation process.The total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.33%with increasing the reaction time from 10 to 70 min.The asphaltene content increased from 12.14%to a maximum of 22.39%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction period.The asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.

Real-Time Observation of Instantaneous ac Stark Shift of a Vacuum Using a Zeptosecond Laser Pulse

Based on the numerical solution of the time-dependent Dirac equation,we propose a method to observe in real time the ac Stark shift of a vacuum driven by an ultra-intense laser field.By overlapping the ultra-intense pump pulse with another zeptosecond probe pulse whose photon energy is smaller than 2mc^(2),electron–positron pair creation can be controlled by tuning the time delay between the pump and probe pulses.Since the pair creation rate depends sensitively on the instantaneous vacuum potential,one can reconstruct the ac Stark shift of the vacuum potential according to the time-delay-dependent pair creation rate.

Effect of brazing temperature on microstructure and tensile strength ofγ-TiAl joint vacuum brazed with micro-nano Ti−Cu−Ni−Nb−Al−Hf filler

A novel micro-nano Ti−10Cu−10Ni−8Al−8Nb−4Zr−1.5Hf filler was used to vacuum braze Ti−47Al−2Nb−2Cr−0.15B alloy at 1160−1220℃ for 30 min.The interfacial microstructure and formation mechanism of TiAl joints and the relationships among brazing temperature,interfacial microstructure and joint strength were emphatically investigated.Results show that the TiAl joints brazed at 1160 and 1180℃ possess three interfacial layers and mainly consist of α_(2)-Ti_(3)Al,τ_(3)-Al_(3)NiTi_(2) and Ti_(2)Ni,but the brazing seams are no longer layered and Ti_(2)Ni is completely replaced by the uniformly distributed τ_(3)-Al_(3)NiTi_(2) at 1200 and 1220℃ due to the destruction of α_(2)-Ti_(3)Al barrier layer.This transformation at 1200℃ obviously improves the tensile strength of the joint and obtains a maximum of 343 MPa.Notably,the outward diffusion of Al atoms from the dissolution of TiAl substrate dominates the microstructure evolution and tensile strength of the TiAl joint at different brazing temperatures.

A high Li-ion diffusion kinetics in multidimensional and compact-structured electrodes via vacuum filtration casting

Manufacturing process,diffusion co-efficient and areal capacity are the three main criteria for regulating thick electrodes for lithium-ion batteries(LIBs).However,simultaneously regulating these criteria for LIBs is desirable but remains a significant challenge.In this work,niobium pentoxide(Nb_(2)O_(5))anode and lithium iron phosphate(LiFePO_(4))cathode materials were chosen as the model materials and demonstrate that these three parameters can be simultaneously modulated by incorporation of micro-carbon fibers(MCF)and carbon nanotubes(CNT)with both Nb_(2)O_(5) and LFP via vacuum filtration approach.Both as-prepared MNC-20 anode and MLC-20 cathode achieves high reversible areal capacity of≈5.4 m A h cm^(-2)@0.1 C and outstanding Li-ion diffusion coefficients of≈10~(-8)cm~2 s~(-1)in the half-cell configuration.The assembled MNC-20‖MLC-20 full cell LIB delivers maximum energy and power densities of244.04 W h kg^(-1)and 108.86 W kg^(-1),respectively.The excellent electrochemical properties of the asprepared thick electrodes can be attributed to the highly conductive,mechanical compactness and multidimensional mutual effects of the MCF,CNT and active materials that facilitates rapid Li-ion diffusion kinetics.Furthermore,electrochemical impedance spectroscopy(EIS),symmetric cells analysis,and insitu Raman techniques clearly validates the enhanced Li-ion diffusion kinetics in the present architecture.

Effects of vacuum magnetic field region on the compact torus trajectory in a tokamak plasma

The trajectory of the compact torus(CT)within a tokamak discharge is crucial to fueling.In this study,we developed a penetration model with a vacuum magnetic field region to accurately determine CT trajectories in tokamak discharges.This model was used to calculate the trajectory and penetration parameters of CT injections by applying both perpendicular and tangential injection schemes in both HL-2A and ITER tokamaks.For perpendicular injection along the tokamak's major radius direction from the outboard,CTs with the same injection parameters exhibited a 0.08 reduction in relative penetration depth when injected into HL-2A and a 0.13reduction when injected into ITER geometry when considering the vacuum magnetic field region compared with cases where this region was not considered.In addition,we proposed an optimization method for determining the CT's initial injection velocity to accurately calculate the initial injection velocity of CTs for central fueling in tokamaks.Furthermore,this paper discusses schemes for the tangential injection of CT into tokamak discharges.The optimal injection angle and CT magnetic moment direction for injection into both HL-2A and ITER were determined through numerical simulations.Finally,the kinetic energy loss occurring when the CT penetrated the vacuum magnetic field region in ITER was reduced byΔEk=975.08 J by optimizing the injection angle for the CT injected into ITER.These results provide valuable insights for optimizing injection angles in fusion experiments.Our model closely represents actual experimental scenarios and can assist the design of CT parameters.

Wavelength calibration and spectral analysis of vacuum ultraviolet spectroscopy in EAST

A vacuum ultraviolet(VUV)spectroscopy with a focal length of 1 m has been engineered specifically for observing edge impurity emissions in Experimental Advanced Superconducting Tokamak(EAST).In this study,wavelength calibration for the VUV spectroscopy is achieved utilizing a zinc lamp.The grating angle and charge-coupled device(CCD)position are carefully calibrated for different wavelength positions.The wavelength calibration of the VUV spectroscopy is crucial for improving the accuracy of impurity spectral data,and is required to identify more impurity spectral lines for impurity transport research.Impurity spectra of EAST plasmas have also been obtained in the wavelength range of 50–300 nm with relatively high spectral resolution.It is found that the impurity emissions in the edge region are still dominated by low-Z impurities,such as carbon,oxygen,and nitrogen,albeit with the application of fulltungsten divertors on the EAST tokamak.

Ablation behaviour and mechanical performance of ZrB_(2)-ZrC-SiC modified carbon/carbon composites prepared by vacuum infiltration combined with reactive melt infiltration

The development of advanced aircraft relies on high performance thermal-structural materials,and carbon/carbon com-posites(C/C)composited with ultrahigh-temperature ceramics are ideal candidates.However,the traditional routes of compositing are either inefficient and expensive or lead to a non-uniform distribution of ceramics in the matrix.Compared with the traditional C/C-ZrC-SiC composites prepared by the reactive melt infiltration of ZrSi_(2),C/C-ZrB_(2)-ZrC-SiC composites prepared by the vacuum infiltration of ZrB_(2) combined with reactive melt infiltration have the higher content and more uniform distribution of the introduced ceramic phases.The mass and linear ablation rates of the C/C-ZrB_(2)-ZrC-SiC composites were respectively 68.9%and 29.7%lower than those of C/C-ZrC-SiC composites prepared by reactive melt infiltration.The ablation performance was improved because the volatilization of B_(2)O_(3),removes some of the heat,and the more uniformly distributed ZrO_(2),that helps produce a ZrO2-SiO2 continu-ous protective layer,hinders oxygen infiltration and decreases ablation.

Endoscopic vacuum assisted closure therapy for esophagopericardial fistula in a 16-year-old male:A case report

BACKGROUND Esophagopericardial fistula(EPF)is a rare,life-threatening condition with limited scientific literature and no established management guidelines.This case report highlights a successful multidisciplinary approach and the innovative use of endoscopic vacuum assisted closure(endoVAC)therapy in treating this complex condition.CASE SUMMARY A 16-year-old male with a history of esophageal atresia and colon interposition presented with progressive chest pain,fever,and dyspnea.Imaging revealed an EPF with associated pleural and pericardial effusions.Initial management with an esophageal stent failed,prompting the use of an endoVAC system.The patient underwent multiple endoVAC device changes and received broad-spectrum antibiotics and nutritional support.The fistula successfully closed,and the patient recovered,demonstrating no new symptoms at a 6-month follow-up.CONCLUSION EndoVAC therapy can effectively manage EPF,providing a minimally invasive treatment option.

The Pionic Deuterium and the Pion Tetrahedron Vacuum Polarization

A double-well potential model is proposed for the pionic deuterium that enables to calculate the energy split, the potential barrier height and estimate the pion tetrahedron edge length. We propose that pion tetrahedrons, πTd = ud~dũ, play a central role in the Yukawa interaction by enabling quark exchange reactions between protons and neutrons by tunneling through a potential barrier. A vacuum polarization Feynman diagram is proposed for the πTd having chains of fermion loops for the two valence quarks and anti-quarks connected by gluons. With a higher order vacuum polarization diagram, the d and u quark loops are interleaved and the chiral symmetry is broken dynamically. The proposed πTd vacuum polarization integral does not diverge in both the IR and UV limits and vanishes in the limit of an infinite pion tetrahedron condensate. We propose a new Delbruck scattering Feynman diagram that includes d and u quark and anti-quark interleaved loops. We further propose that conversion of gravitons to photons may occur via quark and anti-quark loops that describe the pion tetrahedrons dynamics in the vacuum and may also transfer gravitational waves.

On the Vacuum Hydrodynamics of Moving Bodies—The Theory of General Singularity

The Theory of General Singularity is presented, unifying quantum field theory, general relativity, and the standard model. This theory posits phonons as fundamental excitations in a quantum vacuum, modeled as a Bose-Einstein condensate. Through key equations, the role of phonons as intermediaries between matter, energy, and spacetime geometry is demonstrated. The theory expands Einsteins field equations to differentiate between visible and dark matter, and revises the standard model by incorporating phonons. It addresses dark matter, dark energy, gravity, and phase transitions, while making testable predictions. The theory proposes that singularities, the essence of particles and black holes, are quantum entities ubiquitous in nature, constituting the very essence of elementary particles, seen as micro black holes or quantum fractal structures of spacetime. As the theory is refined with increasing mathematical rigor, it builds upon the foundation of initial physical intuition, connecting the spacetime continuum of general relativity with the hydrodynamics of the quantum vacuum. Inspired by the insights of Tesla and Majorana, who believed that physical intuition justifies the infringement of mathematical rigor in the early stages of theory development, this work aims to advance the understanding of the fundamental laws of the universe and the perception of reality.

Heuristic Estimation of the Vacuum Energy Density of the Universe: Part II-Analysis Based on Frequency Domain Electromagnetic Radiation

In Part I of this paper, an inequality satisfied by the vacuum energy density of the universe was derived using an indirect and heuristic procedure. The derivation is based on a proposed thought experiment, according to which an electron is accelerated to a constant and relativistic speed at a distance L from a perfectly conducting plane. The charge of the electron was represented by a spherical charge distribution located within the Compton wavelength of the electron. Subsequently, the electron is incident on the perfect conductor giving rise to transition radiation. The energy associated with the transition radiation depends on the parameter L. It was shown that an inequality satisfied by the vacuum energy density will emerge when the length L is pushed to cosmological dimensions and the product of the radiated energy, and the time duration of emission is constrained by Heisenberg’s uncertainty principle. In this paper, a similar analysis is conducted with a chain of electrons oscillating sinusoidally and located above a conducting plane. In the thought experiment presented in this paper, the behavior of the energy radiated by the chain of oscillating electrons is studied in the frequency domain as a function of the length L of the chain. It is shown that when the length L is pushed to cosmological dimensions and the energy radiated within a single burst of duration of half a period of oscillation is constrained by the fact that electromagnetic energy consists of photons, an inequality satisfied by the vacuum energy density emerges as a result. The derived inequality is given by where is the vacuum energy density. This result is consistent with the measured value of the vacuum energy density, which is 5.38 × 10-10 J/m. The result obtained here is in better agreement with experimental data than the one obtained in Part I of this paper with time domain radiation.

Umbilical Cord Prolapse Managed by Assisted Vacuum Delivery

G4P3L3 was at 40 weeks of gestation who was admitted in active stage of labor with normal fetal heart rate. At 8 cm cervical dilatation she experienced spontaneous rupture of membrane with clear liquor. Cord prolapse was detected and was prepared for caesarian section meanwhile she was kept in knee chest position and bladder was filled with normal saline 0.9%. 30 min before operation she was fully dilated with signs of Non reassuring fetal status, vacuum extraction was done to assist delivery as soon as possible. The APGAR score was 6 and 10 in the first and fifth minutes respectively. Mother and the baby were discharged the next day in good condition.